Anfair Electronics Plastic Factory CAHBTAD Bluetooth Receiver User Manual NS CAHBTAD 16 0647 QSG V2 EN ai

Download:
Mirror Download [FCC.gov]
Document ID	3184586
Application ID	t0c0J6XcRFxf1D8xI3FJkg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.11kB (138899 bits)
Date Submitted	2016-11-02 00:00:00
Date Available	2017-02-01 00:00:00
Creation Date	2016-08-17 21:00:32
Producing Software	Acrobat Distiller 10.1.16 (Windows)
Document Lastmod	2016-08-19 13:45:50
Document Title	NS-CAHBTAD_16-0647_QSG_V2_EN.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jennifer

V2
Flat size (W×H): 16.73 × 6.5 in (425 × 165 mm.)
Final folded size: 3.35 × 3.25 in (85 × 82.5 mm.)
NS-CAHBTAD_16-0647_QSG_V2_EN.ai 1 8/17/2016 9:00:24 PM
QUICK SETUP GUIDE
Bluetooth
Receiver
PACKAGE CONTENTS
CHARGING YOUR RECEIVER
PAIRING YOUR RECEIVER
USING YOUR RECEIVER
•
•
•
•
Fully charge your receiver before you use it for
the first time. When the red LED starts to blink
during use, the battery is low and needs
charging.
1 Plug the micro USB end (small plug) on the
USB cable into the micro USB port on your
receiver.
2 Plug the USB end (large plug) on the cable
into an active USB port or any USB charger.
The LED lights red while charging. When fully
charged, the LED turns off. Charging may take
up to three hours.
To get started, you need to pair your receiver
with your phone or device.
1 With your receiver turned off, press and hold
the MFB
until the LED starts flashing blue
(about three to five seconds). Your receiver
turns on and enters pairing mode.
2 Turn on the Bluetooth feature on your phone
or device, then search for and click your
receiver (NS-CAHBTAD). See the instructions
that came with your Bluetooth device for
information about pairing.
3 If you are asked for a password, enter 0000.
When pairing is complete, the LED lights solid
blue.
1 Press and hold the MFB
for three to five
seconds to turn on your receiver. The LED
lights solid blue when your receiver is
connected to a Bluetooth device (for
example, your phone).
2 Insert the 3.5 mm headphone plug into the
3.5 mm audio jack on your headphones.
Make sure that the plug is fully inserted.
Bluetooth receiver
Micro USB cable
Foam spacer
Quick Setup Guide
FEATURES
Inside view
Outside view
NS-CAHBTAD
Headphones not included
RECONNECTING TO A PAIRED DEVICE
3.5 mm headphone plug
Microphone
Micro USB charging port
Volume up/Next
Multi-function button (MFB): Power on/off,
play, pause, call
6 Volume down/Previous
7 LED indicator
Before using your new product, please read these instructions to prevent any damage.
3 When charging is complete, unplug the USB
cable from your receiver. Your receiver is
ready to use.
1 Turn on your receiver. It automatically
connects to the last connected device.
2 If your receiver does not automatically
reconnect, reselect NS-CAHBTAD on your
Bluetooth device.
If you want to pair with another device, turn off
the Bluetooth feature on the connected device,
then repeat the pairing procedure to connect to
a new device.
Note: If your receiver is not paired to a Bluetooth
device for three minutes, it automatically turns off.
3 To turn off your receiver, press and hold the
MFB
for two seconds.
FINAL
FOR PRINT
NS-CAHBTAD_16-0647_QSG_V2_EN.ai 2 8/17/2016 9:00:32 PM
ADJUSTING THE FIT
LISTENING TO MUSIC
If there is a large gap between your receiver
and headphones when you plug in your
receiver, use the provided foam spacer to fill
the gap.
1 If your receiver is plugged into headphones,
unplug it.
2 Peel off the adhesive film on the foam
spacer, then attach the foam spacer to your
receiver.
• To play or pause audio, press the MFB
once.
• To increase the volume, press the button
once.
• To reduce the volume, press the button
once.
• To skip to the next track, press and hold .
• To skip to the previous track, press and hold
Foam spacer
Adhesive film
3 Plug your receiver back to the headphones.
MAKING A PHONE CALL
TROUBLESHOOTING
PROBLEM
SOLUTION
No sound or low
volume
• Make sure that your Bluetooth device is turned on, the
Bluetooth feature is turned on, and NS-CAHBTAD is
selected.
• Turn up the volume on your receiver and Bluetooth
device.
• Make sure that your Bluetooth device is not muted.
• Make sure that your receiver and Bluetooth device are
not paired to other devices.
Cannot connect
with Bluetooth
• Shorten the distance between your receiver and
Bluetooth device.
• Turn your receiver and device off, then back on. Re-pair
your receiver and Bluetooth device.
• Make sure that your receiver and Bluetooth device are
not paired to other devices.
• Make sure that you have selected NS-CAHBTAD on your
Bluetooth device.
• Make sure that your Bluetooth device supports the HSP,
HFP, A2DP, or AVRCP Bluetooth protocol.
• To make a call, use your phone’s controls, then
select your receiver as the audio source.
• To answer an incoming call, press the MFB .
• To reject an incoming call, press and hold the
MFB
• To end a call, press the MFB
once.
Bluetooth device
keeps unpairing
• Shorten the distance between your receiver and
Bluetooth device.
• Recharge the batteries in your receiver and Bluetooth
device.
NS-CAHBTAD does
not appear on my
Bluetooth device
• Shorten the distance between your receiver and
Bluetooth device.
• Put your receiver into pairing mode (see PAIRING YOUR
RECEIVER), then, on your Bluetooth device, refresh the list
of Bluetooth devices. (See the documentation that came
with your Bluetooth device.)
No power
• Make sure that your receiver’s battery is charged. See
CHARGING YOUR RECEIVER.
• Make sure that your receiver is turned on. See USING
YOUR RECEIVER.
LEGAL NOTICES
FCC Statement:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation
exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux
rayonnements Industry Canada limites établies pour un
environnement non contrôlé.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2016 Best Buy. All rights reserved
Made in China
V2 ENGLISH 16-0647

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Create Date                     : 2016:08:17 21:00:32-06:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:08:19 13:45:50+08:00
Metadata Date                   : 2016:08:19 13:45:50+08:00
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Format                          : application/pdf
Title                           : NS-CAHBTAD_16-0647_QSG_V2_EN.ai
Creator                         : jennifer
Document ID                     : uuid:8f0a1e01-8199-44e8-bf60-0c1e5bd9a49a
Instance ID                     : uuid:507955f7-8d50-4876-9007-4e52afda4914
Page Count                      : 2
Author                          : jennifer

EXIF Metadata provided by EXIF.tools