Angelcare Canada AC215T Baby Monitor-Nursery Unit User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3391708
Application ID	c5CMmhoWJb5r/kDkRZY2HA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	380.99kB (4762355 bits)
Date Submitted	2017-05-15 00:00:00
Date Available	2017-05-15 00:00:00
Creation Date	2017-03-03 11:21:27
Producing Software	3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod	2017-05-12 10:54:41
Document Title	User Manual

FOR YOUR PEACE OF MIND
OWNER’S MANUAL
VIDEO, MOVEMENT
& SOUND MONITOR
Model AC215
TABLE OF CONTENTS
WARNINGS ..................................................................................................................................................3

ĂāĆ SETUP REQUIREMENTS ...........................................................................................ċċċ.......................5
STEP 1 - Charging the Parent Unit (9 hours) .............................................................................................6
STEP 2 - Installing the Sensor Pad ...............................................................................................................7
STEP 3 - Setting up the Nursery Unit ..........................................................................................................9
STEP 4 - Turning on your monitor ................................................................................................................9
STEP 5 - Testing and getting to know your monitor ............................................................................10
STEP 6 - Activating and deactivating additional functions ............................................................... 13
Troubleshooting ................................................................................................................................................ 17
Limited warranty ............................................................................................................................................... 18
Technical specifications .................................................................................................................................. 18
FRANÇAIS ........................................................................................................................................................... 19
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH OR DAMAGES TO THE PRODUCT.
THE SENSOR PAD FEATURE IS NOT FOR USE WITH ADULTS, CHILDREN OR
INFANTS OLDER THAN 24 MONTHS.
THE SENSOR PAD IS NOT INTENDED TO BE USED TO DETERMINE
IF A CHILD IS OUT OF THE CRIB.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare®, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: Please contact us at: angelcare@cdecinc.ca
Other countries: Please contact your local distributor.
FCC AND IC REGULATIONS
RF radiation exposure statement
The Nursery Unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Caution: To maintain the compliance with the FCC’s and Industry Canada’s RF exposure guideline, install
the Nursery Unit at least 20 cm from ALL persons. The transmitter of this device must not be co-located or
operating in conjunction with any other antenna or transmitter.
Industry Canada
This product meets the applicable Industry Canada technical specifications.
CAN ICES-3 (B)/NMB-3 (B)
WARNINGS
1. T H I S
PRODUCT
C A N N OT
R EPL AC E
RESPONSIBLE ADULT SUPERVISION. This product
is designed to aid in the monitoring of your child.
When using the monitor, you must still provide the
supervision necessary for the continued safety
of your child. Monitoring of premature babies,
or those considered to be at risk, should always
be carried out under the supervision of a health
professional. This monitor SHOULD NOT be used
as a medical device, nor as a device to prevent
Sudden Infant Death Syndrome (SIDS).
2. WARNING Strangulation Hazard — Children
have STRANGLED in cords. Keep adapter cords
o ut of th e rea ch of
children (more than 1
meter away). NEVER use
Sensor Pad(s) without
t h e p r o te c t i ve c o r d
covering.
Check
protective cord covering
before
each
use.
Immediately discontinue
use of Sensor Pad(s) if
protective covering is
damaged or broken.
3. Never use extension cords with adapters. ONLY
use the adapters provided.
4. When an adapter is plugged into an electrical
outlet, DO NOT touch the exposed end.
5. ALWAYS be sure that both the transmitter and
receiver are working properly and are within range
of each other. Test the monitor before first use,
periodically and when changing location of the
Nursery Unit.
6. ALWAYS be sure to immediately check on baby
whenever an alarm sounds.
7. DO NOT use monitor near water (such as bath
tub, sink, etc.).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
8. Keep monitor AWAY from heat sources (such
as stoves, radiators, etc.).
9. ALWAYS place both the Nursery Unit and the
Parent Unit on a flat surface in an upright position
and allow for proper ventilation. DO NOT place
on sofas, cushions, beds, etc. which may block
ventilation.
and assembling the product and keep small parts
away from children.
13. When using the monitor, the room temperature
should be between 10°C and 40°C.
BATTERY WARNING
14. D a n g e r of ex p l o s i o n if b a t te r i e s a re
incorrectly replaced. The Parent Unit battery is a
replaceable Li-Ion battery. Only use the Angelcare
recommended replacement battery. In both units,
DO NOT mix old and new batteries. DO NOT mix
alkaline, standard or rechargeable batteries.
Insert batteries with correct polarity. DO NOT
short-circuit supply terminals. ONLY use the
recommended batteries or equivalent (volts and
size) and the correct adapter. Remove batteries in
both units when product is stored for long periods
of time or when batteries are exhausted. Dispose
exhausted batteries properly. Keep all batteries
away from children.
15. IMPORTANT SAFETY INSTRUCTIONS
15.1 Heed all warnings – All warnings on the
product and in the operating instructions should
be adhered to.
15.2 Follow all instructions – All operating and
use instructions should be followed.
15.3 Water and moisture - DO NOT use this
apparatus near water. For example, near a bath
tub, wash bowl, kitchen sink, laundry tub, in a wet
environment or near a swimming pool and the
like. Care should be taken so that objects DO NOT
fall onto units and that liquids are not spilled into
either unit or Sensor Pad through its openings.
15.4 Cleaning - Disconnect all units before
cleaning. DO NOT immerse in water any part of
the monitor. Clean only with dry cloth.
15.5 Ventilation - DO NOT block any ventilation
openings. Allow for proper ventilation when units
are in use. DO NOT cover the Nursery Unit or the
Parent Unit with any object such as a blanket.
DO NOT place it in a drawer or in any location
which would muffle the sound or interfere with
the normal flow of air.
15.6 Heat sources - DO NOT install near any heat
sources such as radiators, heat registers, stoves,
TVs or other apparatus (including amplifiers)
that produce heat. Heat can damage the case or
electrical parts.
11. This product is NOT a toy. DO NOT allow
children to play with it.
15.7 Power cord protection - Protect the Sensor
Pad cord and Adapter’s power cord from being
walked on or pinched by furniture or other items –
Power supply cords should be routed so that they
are not likely to be walked on or pinched by items
upon or against them, paying particular attention
to cords and plugs, convenience receptacle, and
the point where they exit from the product.
The socket outlet shall be installed near the
equipment and shall be easily accessible. Make
sure to plug the adapter to the socket outlet
nearest to the equipment and that is easily
accessible. To disconnect from mains, unplug
the adapter.
12. This product contains small parts. Adult
assembly required. Exercise care when unpacking
15.8 Accessories - O nly use at tachm e nt s/
accessories specified by the manufacturer. DO
10. This monitor uses public airwaves to transmit
signals. The Parent Unit may pick up signals or
interference from other nursery monitors in your
area. Your monitor may even be picked up by
other households. To protect your privacy, make
sure both units are turned OFF when not in use. If
you experience interference, change the channel
on both units.
NOT place this product on an unstable cart,
stand, tripod, bracket or table. The product may
fall, causing serious injury to a child or adult and
serious damage to the product. Use ONLY with a
cart, stand, tripod, bracket or table recommended
by the manufacturer or sold with the product.
Any mounting of the product should follow the
manufacturer’s instructions.
15.9 Unplug this appliance during lightning storms
or when not used for long periods of time.
15.10 Servicing - DO NOT attempt to service
this product yourself as opening or removing
covers (except battery door) may expose you to
dangerous voltage or other hazards.
15.11 Replacement parts - When replacement
parts are required, be sure the replacement parts
specified by the manufacturer have the same
characteristic as the original part. Unauthorized
substitution may result in fire, electric shock or
other hazards.
15.12 Usage - This baby monitor is intended as
an aid. It is NOT a substitute for responsible and
proper adult supervision and should not be used
as such. Use this appliance ONLY for its intended
use as described in this manual.
15.13 Power Sources - Operate this product only
from the type of power source indicated on the
type plate of the adaptor. If you are unsure of the
type of power supply to your home, consult your
dealer or local power company.
15.14 Overloading - DO NOT overload wall
outlets, extension cords or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
15.15 Object and Liquid Entry - NEVER push
objects of any kind into this product through
casing slots as they may touch dangerous voltage
points or short out parts that could result in a risk
of fire or electric shock. NEVER spill liquid of any
kind on the product.
15.16 Antenna - The antenna used for this
transmitter must be installed to provide a
separation distance of at least 20 cm from all
persons and must not be collocated or operating in
conjunction with any other antenna or transmitter.
15.17 Power Lines - An outside antenna system
should NOT be located in the vicinity of overhead
power lines or other electric light or power circuit,
or where it can fall into such power lines or circuits
as contact with them may be fatal.
15.18 Vibration Source - When the monitor is
in use, DO NOT use a crib mobile or other crib
accessories that may produce vibrations. Other
sources of vibrations may include fans, washing
machines, loud music, etc. These sources of
vibration may interfere with the performance of
your Angelcare ® monitor and the alarm will not
sound if it continues to detect any movement
other than your baby’s. Be sure all vibration
sources are eliminated before using the monitor.
You may experience false alarms for several
reasons . The most common reason is the
Nursery Unit has not been turned OFF after
you have removed your baby from the crib.
Another reason is the Sensor Pad has not
been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm surface
with the printed side facing up. The sensitivity
level may also need to be adjusted. Refer to Step
5.1. Always be sure to immediately check on baby
whenever an alarm sounds.
15.19 Sensor Pad - Your Sensor Pad can be used
in any crib that is stationary. If the crib has a
spring or slat base, place a hard board between
the crib base and the Sensor Pad measuring
at least 33 x 33 cm and 6 mm thick. Only use
your Angelcare ® monitor in a stationary sleeping
environment such as a crib where the Sensor
Pad can rest on a completely flat, firm surface.
The sensor pad is made of plastic and does not
permit the air to circulate. Therefore, mildew
build up could develop underneath the mattress
in the sensor pad area. We suggest rotating
the mattress regularly to prevent any mildew.
16. I M P O R TA N T S A F E T Y I N S T R U C T I O N S
RELATED TO USE OF BATTERIES
16.1 Use ONLY the type and size of batteries
specified in the owner’s manual. There is a risk
of explosion if batteries are replaced with an
incorrect type.
16.2 Charge the battery for 9 hours prior to first
use. Be sure to have the monitor in the OFF
position during this period. ONLY use the adapters
included with your monitor.
16.3 DO NOT use these adapters with any other
equipments.
16.4 When unplugging the adapter from the
Nursery Unit, be sure it is switched to the OFF
position. If it isn’t, the unit will revert to battery
mode if batteries are installed.
16.5 DO NOT use rechargeable batteries in the
Nursery Unit. Use alkaline batteries ONLY.
16.6 DO NOT dispose batteries in fire. They may
explode. Check with local regulations for possible
special disposal instructions.
16.7 Exercise care in handling batteries in order
not to short out the batteries with conducting
materials such as rings, bracelets and keys.
Overcharging, short circuiting, reverse charging,
mutilation, or incineration of batteries must be
avoided to prevent one or more of the following
occurrences: release of toxic materials, release of
hydrogen and/or oxygen, gas and rise in surface
temperature.
16.8 DO NOT attempt to recharge batteries
provided with or identified for use with this
product that are not intended to be charged.
The batteries may leak corrosive electrolyte or
explode.
16.9 DO NOT attempt to rejuvenate the batteries
provided with or identified for use with this
product by heating them. Sudden release of
battery electrolyte may occur, causing burns or
irritation to eyes or skin.
16.10 If and when necessary, the batteries must
be replaced with identical new ones or equivalent
(volts and size). If a battery to be replaced is
connected with other batteries in series, replace
the other batteries at the same time as well. DO
NOT mix old and new batteries.
16.11 Reverse polarity installation of the batteries
in the end product must be avoided. Reverse
insertion of batteries can cause charging, and
that may result in leakage or explosion.
16.12 Remove batteries from both units if you store
the product over 30 days because the batteries
could leak and damage the product.
16.13 Discard ‘dead’ batteries as soon as possible
since ‘dead’ batteries are more likely to leak in a
product. If a battery has leaked or vented, it should
be replaced immediately using protective gloves.
16.14 DO NOT store this product, or the batteries
provided with or identified for use with this
product, in high-temperature areas.
FCC WARNING
17. (North America Only)
17.1 Warning: Changes or modifications to this
equipment not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
17.2 NOTE: This equipment has been tested
and found to comply with part 15 of the FCC
Rules .
These
limit s a re d esig n e d
to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
17.3 H oweve r, th e re is n o g ua ra nte e that
inter ference will not occur in a par ticular
SETUP REQUIREMENTS
IC
17.5 This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
VIDEO, MOVEMENT
& SOUND MONITOR
INCLUDED:
Parent Unit with
Rechargeable Battery
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment OFF
and ON, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an
outlet on a circuit di erent from that
to which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
17.4 This device complies with the part 15 of
th e FCC R u l e s . O p e r ati o n i s s u b j e c t
to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Nursery Unit
1 Sensor Pad (
) or 2 Sensor Pads
-2SP) with pre-installed cord covers
WHAT YOU WILL NEED
(NOT INCLUDED):
YOU MUST PREPARE:
One hardboard (not included)
Thickness: 6 mm
Minimum dimensions:
33 cm x 33 cm
Maximum dimensions:
equal to the mattress size
Tabletop stand
(for camera)
AC adapter
(for parent unit)
Hardboard
IMPORTANT
The hardboard must be larger than the Sensor Pad
surface area or in the case of the
-2SP of
two Sensor Pads.
Miniature Philips
Screwdriver
Split USB cable
AC adapter
(for camera)
STEP 1 - CHARGING THE PARENT UNIT (9 HOURS)
1) Connect the adapter to the
Parent Unit and into an
electrical outlet.
2) Charge the unit for
9 continuous
hours (prior to first use).
NOTE:
To optimize your battery performance
please refer to Battery Guidelines in
the Troubleshooting section.
A) 3.5” LCD Screen
PARENT UNIT:
B) Power ON/OFF
Indicator
C) VOX Indicator
D) Sound & TIC Light
Indicator
E) Zoom button
F) VIDEO ON/OFF button
G) MENU/SELECT Button
H) Brightness (+ or -)
I) Power ON/OFF
J) UP/DOWN Button/
Volume Control
K) Adapter Outlet
Front Side
Right Side
L) Speaker (not shown)
M) Tripod
N) Battery door
WARNING
STRANGULATION HAZARD.
Children have STRANGLED in cords:
• Keep adapter cords out of the reach of children (more
than 1 meter away).
• Because of the serious strangulation risk to infants and
toddlers, parents and caregivers should never place the
Nursery Unit within 1 meter of a crib.
• NEVER use Sensor Pad without the cord covers. Check
cord covers before each use to ensure it is securely
placed under the leg of the crib. Discontinue use of
Sensor Pad if any cord covers are damaged or broken.
• NEVER use extension cords with adapters. ONLY use
the adapters provided. This product is not a toy. Never
allow children to play with it.
Cord covers 1, 2, 3, 4:
Position on floor
STEP 2 - INSTALLING THE SENSOR PAD
Cord cover 4:
Contains double sided tape to
securely install beneath crib leg
Cord cover 5:
Position vertically between
mattress support and floor
Cord cover 6:
Place under the mattress
Sensor Pad with pre-installed cord covers
2.1 - SELECT A LOCATION FOR THE NURSERY UNIT
Select a location
for the Nursery
Unit that is at
least 1 meter away
from the crib.
IMPORTANT
Keep
at least
1 m.
IMPORTANT
Place the crib near a supporting wall and far from air currents. Install the Nursery Unit on a flat, stable
surface facing the crib at a distance of at least 1 meter. Make sure to plug the adapter to the socket outlet
nearest to the equipment and that is easily accessible.
2.2 - SELECT THE CRIB LEG YOU WILL BE USING TO SECURE THE CORD COVERS
RECOMMENDED
OR
Figure 1
Figure 2
1) Use the crib leg by the wall closest to the Nursery Unit (Figure 1). In cases where the
Nursery Unit is across the room, use the leg closest to the Nursery Unit to position the
covered wire (Figure 2). It is always preferable that the covered cord run along a wall.
2.3 - INSTALL THE SENSOR PAD ON THE MATTRESS SUPPORT
1) Remove the mattress from
the crib.
1 Sensor Pad
or 2 Sensor Pads
(depending on model)
2) Place the Sensor Pad(s) –
printed side up – on top
of the hardboard.
3) Run the connection pin,
warning label and the first
5 cord covers down along
the backside of the crib
leg, between the mattress
support and the inside
edge of the crib.
4) Bring the first 4 cord covers down
the floor, and keep the 5th cord
cover vertically, along the backside
of the crib leg, (between the
mattress and the inside edge of
the crib).
5) Remove any cord slack to make
sure no parts of the cord are loose.
6) Place the 6th cord cover approximately
8 cm from the edge of the mattress
support.
8 cm
7) Snap together the remaining cord
covers that will run along the floor.
The Sensor Pad functions with any size
and type of mattress except memory-foam
mattresses and hollow frame mattresses.
CLIC!
The hardboard maintains a constant
pressure on the Sensor Pad, enabling it to
detect the baby’s movements even when
the baby is at the edges of the crib.
8) Remove any cord slack to make sure
no parts of the cord are loose.
9) Peel off the double-sided tape on the
4th cord cover and place it securely
under the crib leg.
10
10) Install the Nursery Unit on a flat, stable
surface facing the crib at a distance of
at least 1 meter and plug the Sensor Pad
cord into the Nursery Unit.
11) Check to make sure the Sensor Pad has
not moved from position.
12) Place the mattress back inside the crib.
WARNING
STRANGULATION HAZARD
• Remove all slack from Sensor Pad Cord.
• When lowering the mattress support
as your child grows, slide the vertical
Cord Cover (5) upward so it remains
approximately in the center between
the mattress support and the floor. Slide
the Sensor Pad Cord through the Floor
Cover to eliminate any additional slack.
• The Sensor Pad is not designed for use
with adults, children or infants older
than 24 months.
• Discontinue used of the Sensor Pad
when child is older than 24 months.
Remove Sensor Pad from crib and store
for future use.
• BEFORE FIRST TIME USE: To test
that the unit is ready for use, refer to
instruction manual on how to test that
the installation has been done correctly.
STEP 3 - SETTING UP THE CAMERA
1) Place the Camera at a
minimum of 1 meter /
3 feet away from the crib.
2) Connect the USB plug to
the Camera.
3) Connect the USB plug with
the power adapter and then
with an electrical outlet.
4) Adjust the camera using
the magnetic mount to get
the best view of baby in
the crib.
3.1 - CAMERA
A) POWER ON/OFF
B) Pause Sensor Pad
C) Speaker
D) Microphone
E) Camera
F) Room temperature display
G) Micro USB charging port
Front Side
TURNING ON YOUR MONITOR
1) Press and hold the Parent Unit
ON/OFF button for 2 seconds until
LCD screen is turned ON. Angelcare’s
logo will be shown for 1 second.
2) Slide the Camera ON/OFF switch to
the ON position
3) The Parent Unit will display Video
mode screen.
When Parent Unit is turned
ON and Camera is OFF,
Parent Unit will display
Disconnected mode.
If there is a lost connection between the
2 units after 15 seconds, the Out-of-Range
alarm will sound on the Parent Unit (refer to
troubleshooting):
•
•
The Out-of-Range icon will appear on the
screen.
The Lost Connection icon will appear on the
info bar.
INDICATION BAR IMPORTANT ICONS
Temperature icon: Indicates room temperature
Temperature Alarm icon: Indicates Temperature Alarm is active
Pendulum icon: Indicates the Movement Sensor is active
Night View Mode icon: Night View Mode
Sound icon: Indicates that Sound function is active
Connection icon: Indicates the connection quality between the Parent Unit and the Nursery Unit.
Good connection
Poor connection
Battery Level icon: Indicates battery level
Empty
1/3 Full
2/3 Full
Lost connection
Out-of-Range
Full
STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR
The Angelcare® monitor can be used with the pre-program factory settings or
you can also customize your settings to your preference. Main menu on the LCD
display shows the different operation settings. Use the direction keys to change
or check the different functions on the Parent Unit.
Press the Menu/Select button to select an icon. The light icon will change from
blue to green to show that the icon is selected. Press VIDEO ON/OFF button to
exit or to go back to main menu when in sub-menu.
IMPORTANT
When in menu or sub-menu modes, sound transmission between Parent and Nursery Units will be
temporarily deactivated. ONLY movement-detection alarm will remain active (if function is activated).
5.1 - SENSOR PAD
TO ACTIVATE THE SENSOR PAD:
1) Press Menu/Select button to access
main menu.
2) Select the Movement icon.
3) Use the up and down arrows to activate
or deactivate the Movement Alarm.
4) Press Menu/Select button to confirm.
TO TEST THE SENSOR PAD:
1) Move your hand lightly on the mattress.
The Pendulum icon will appear on Parent Unit
indicator bar.
2) Remove your hand from the mattress. After 15
seconds you will hear a ‘TIC’ pre-alarm sound, and
5 seconds later the Movement Alarm will trigger.
MOVEMENT ALARM
10
•
Alarm activates when no movement
is detected by the Sensor Pad for
20 seconds.
•
Both the Parent Unit and the
Nursery Unit speakers will emit
loud warning sound.
•
Movement Alarm icon will show on
the LCD screen.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the crib while Sensor
Pad is in operation.
• Place the crib near a supporting wall.
• Adjust the Sensor Pad sensitivity level.
• Turn OFF crib mobile, fans, loud music or
anything else that may cause vibration.
TO STOP THE ALARM
OR
On the Parent Unit, press any key
to stop the alarm.
Press the Pager/Hold
button on the Nursery Unit.
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
1) Press Menu/Select button to access
main menu.
2) Select the Settings icon to access sub-menu.
3) Select the Movement Sensitivity icon.
ON
20 sec
4) Use the up and down arrows to choose
the desired sensitivity level (1 to 5).
5) Press Menu/Select button to confirm.
NOTE: If you are receiving false alarms,
adjust the sensitivity level.
TO ACTIVATE THE TIC FUNCTION:
Allows you to hear a TIC sound when Sensor Pad function is activated.
1) Press Menu/Select button to access
the main menu.
2) Select the TIC icon.
3) Use the up and down arrows to activate
or deactivate the TIC function.
4) Press Menu/Select button to confirm.
Regular TIC sound will emit from Parent Unit.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older than 24 months.
• Once you are finished using the Sensor Pad, deactivate the movement function and please
remove it from the baby’s crib and store it away.
5.2 - SOUND
1) Press Menu/Select button to access main menu.
TO ACTIVATE SOUND:
2) Select the Sound icon.
3) Use the up and down arrows to activate or
deactivate the sound.
4) Press Menu/Select button to confirm.
IF YOU HEAR NO SOUND:
TO TEST THE SOUND:
Ask someone to speak into
the Nursery Unit or place the
unit near a radio to ensure that
sound is being picked up.
• Check that both units are powered ON.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them if necessary).
• Bring the Parent Unit closer to the Nursery
Unit.
IMPORTANT
To avoid feedback (whistling), keep both units
at least 3 meters apart.
11
ADJUST SOUND LEVEL
PUT IN SILENT/MUTE MODE
Increase volume
(Up arrow)
Press the down arrow
for 2 seconds to
mute sound. Mute
icon will flash. Press
again for 2 seconds to
reactivate sound.
Lower volume
(Down arrow)
5.3 - BATTERIES
HOW TO CHECK THE BATTERIES:
1/3 full
2/3 full
full
Unplug the adapters from both units.
• If the green light on the Nursery Unit
does not show, replace the batteries.
• If the Parent Unit and its screen do not
light up, recharge the batteries.
HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT:
Leave the Parent Unit plugged to fully
charge the unit. Although the batteries
at 1/3 capacity works normally,
we recommend that you fully recharge them.
PARENT UNIT BATTERY ALARM
•
Alarm activates when the batteries
need to be recharged.
•
Parent Unit will emit a beep sound
every 15 seconds.
•
Battery Alarm icon will show
on LCD screen.
YOU ARE NOW READY TO USE YOUR MONITOR
The Angelcare® monitor can be used with the pre-program factory settings
or you can also customise your settings to your preference.
DEFAULT SETTINGS
Sound Mode: ON
Speaker Volume: Level 3 (of 6)
Movement Mode: ON
Sensor Pad Sensitivity: Level 3 (of 5)
TIC: ON
Temperature Unit: Celsius
Temperature Alarm: OFF
VOX: ON
VOX Level: Level 2 (of 4)
Screen Saver Timer: ON
(after 3 minutes)
LCD Brightness: Level 3 (of 5)
Key Tone: ON
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
12
STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
IMPORTANT
When in the menu or sub-menu modes, sound transmission between Parent and Nursery Units will
be temporarily deactivated. ONLY the movement detection alarm will remain active (if function is
activated).
6.1 - SOUND TRANSMISSION (VOX)
Your monitor is ‘Sound Activated’. This means that it will transmit sounds only when it detects them.
It will detect even the softest levels of crying.
To save power, after 10 seconds, the sound transmission will stop if no sound is detected.
Once sound is detected transmission will automatically activate.
TO ADJUST THE SOUND SENSITIVITY (VOX):
Allows you to determine the sound level needed to trigger sound transmission
to the Parent Unit. This means that sound will only transmit based on the level that you set.
1) Press Menu/Select button to access
the main menu.
2) Select the Settings icon to access
sub-menu.
3) Select the VOX Sensitivity icon.
4) Use the up and down arrows to choose
the desired sensitivity level (1 to 4)
ON
20 sec
5) Press Menu/Select button to confirm.
6.2 - HOLD
Allows you to put your monitor on hold.
1) Press Menu/Select button to access
main menu.
2) Select the Hold icon.
OR
Press and hold the Nursery Unit Pager/
Hold button for at least 2 seconds.
3) Hold icon will appear on the screen.
4) Press and hold the Nursery Unit Pager/
Hold again to return to deactivate Hold.
Nursery Unit Night Light will blink.
Parent Unit will emit 3 consecutive
beeps every 30 seconds to remind
you that monitor is on Hold.
IMPORTANT
When your monitor is on Hold, the movementdetection feature and movement alarm are disabled.
13
6.3 - THERMOMETER
TO CHANGE THE MEASUREMENT UNIT:
1) Press Menu/Select button to access
main menu.
2) Select the Temperature icon to access
sub-menu.
3) Select the ˚C ˚F icon.
15 C
ºC
ºF
30 C
4) Use the up and down arrows to change
from Celsius to Fahrenheit.
ON
ºC
ºF
Celsius
ºC
ºF
Fahrenheit
5) Press Menu/Select button to confirm.
TO ACTIVATE THE TEMPERATURE ALARM:
1) Press Menu/Select button to access
main menu.
2) Select the Temperature icon to access
sub-menu.
3) Select the Temperature Alarm icon.
30 C
15 C
ºC
ºF
4) Use the up and down arrows to activate
or deactivate the Temperature Alarm.
ON
Temperature Alarm icon: Indicates
temperature alarm is ON.
5) Press Menu/Select button to confirm.
TO SET THE TEMPERATURE RANGE:
1) Press Menu/Select button to access
main menu.
2) Select the Temperature icon to access
sub-menu.
3) Select the High Temperature icon to
set maximum temperature range (15 to
32 ˚Celsius/59 to 90 ˚Fahrenheit).
30 C
15 C
ºC
ºF
4) Use the up and down arrows to set the
highest temperature preferred.
ON
The range between the minimum and maximum
temperature must be at least 4 ˚C/7 ˚F. An error
tone will be heard if you try to set it up below
this minimum level.
5) Select the Low Temperature icon to
set minimum temperature range (5 to
20 ˚Celsius/41 to 68 ˚Fahrenheit).
6) Use the up and down arrows to set the
lowest temperature preferred.
7) Press Menu/Select button to confirm.
TEMPERATURE ALARM
14
•
Alarm activates when temperature reaches maximum or minimum set temperature.
•
Parent Unit will emit 4 consecutive beeps, every 5 seconds.
•
Temperature Alarm icon will show on LCD screen.
6.4 - SCREEN SAVER
Allows you to set the screen saver starting point.
1) Press Menu/Select button to access
main menu.
2) Select the Settings icon to access
sub-menu.
3) Select the Screen Saver icon.
ON
20 sec
4) Use the up and down arrows to select
timed delay before Video mode turns
into Screen Saver mode.
5) Press Menu/Select button to confirm.
MANUAL SETTING:
NOTE:
The LCD screen will turn black when video is in
Screen Saver mode. Press any button to return
to Video mode.
To manually activate the Screen Saver mode press
and hold the Parent Unit VIDEO ON/OFF button.
6.5 - INFRARED NIGHT VISION
Allows you to capture image when lighting
is insufficient.
A Night View icon will appear at the top
of the Parent Unit screen.
1) The infrared LEDS will turn ON
automatically when the lighting is not
sufficient, to give a night view on LCD
display.
NOTE:
When the Infrared Night Vision is ON, only
black and white image will be displayed on the
LCD screen.
2) If the light is bright enough in the room,
the infrared LED on the Nursery Unit
will turn OFF automatically.
The Night View icon will disappear at the top
of the Parent Unit screen.
6.6 - NIGHT LIGHT
Allows you to use your monitor as a night light.
TO ACTIVATE THE LIGHT:
Push the button on the back of the right “wing”
to turn the Night Light ON or OFF.
6.7 - PAGER
IMPORTANT
Allows you to locate the Parent Unit.
TO LOCATE PARENT UNIT:
Press the Pager/Hold button for no more
than 2 seconds. The Parent Unit will emit
a paging sound for one minute.
If you press the Pager/Hold
button on the back of the
Nursery Unit for more than
2 seconds, you will put the
movement monitoring on Hold.
To unhold, push the button
again.
15
TO STOP THE PAGING SOUND:
OR
Press any button
on the Parent Unit.
Press the
Nursery Unit’s
Pager/Hold button
6.8 - ZOOM MODE
Allows you to zoom in to twice the normal view.
1) Press and release the Zoom button
on the Parent Unit.
2) The Zoom icon will appear at the
bottom left corner of the screen.
3) Use the arrow keys to zoom in
on what you want to see more closely.
4) Press and release the Zoom button
on the Parent Unit again to return to
normal view.
6.9 - KEY TONE
Allows you to activate or deactivate key tone sound.
1) Press Menu/Select button to access
main menu.
2) Select the Settings icon to access
sub-menu.
3) Select the Key Tone icon.
ON
20 sec
4) Use the up and down arrows to activate
or deactivate Key Tone sound.
5) Press Menu/Select button to confirm.
6.10 - LCD SCREEN BRIGHTNESS
Allows you to adjust the LCD screen brightness on the Parent Unit.
1) Use the left and right arrows to adjust
the screen brightness level (1 to 5).
2) A light bulb will be shown on the LCD
screen.
16
TROUBLESHOOTING
TAKING CARE OF YOUR RECHARGEABLE BATTERIES
•
•
Ensure that you fully charge your batteries for 9 hours before their first use.
To maintain maximum battery life it is recommended that you fully discharge your batteries periodically.
If your Parent Unit is not in use, please turn it OFF.
FALSE ALARMS
•
•
•
•
•
Turn OFF the Nursery Unit.
Verify the connection between the Sensor Pad and the Nursery Unit. Unplug and reconnect the cord.
Make sure there is no bedding between the mattress and the Sensor Pad.
If the crib has a spring or slat base, place a hardboard between the crib base and the Sensor Pad
measuring at least 33 x 33 cm and 6 mm thick.
Make sure the Sensor Pad is positioned as described under the setup requirements. Sensitivity
may need to be adjusted, refer to Step 5.1.
ALARM WILL NOT SOUND
•
•
•
Avoid contact with the crib when the monitor is ON.
Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement from outside the crib.
You may need to decrease the sensitivity, refer to Step 5.1.
NO SOUND IS BEING TRANSMITTED
•
•
•
•
•
•
Bring the Parent Unit closer to the Nursery Unit.
Recharge the Parent Unit.
Check connections or change to another electrical outlet.
Ensure both units are ON.
Ensure mains supply units are activated.
Check on the top bar of the Parent Unit to see if the monitor is on MUTE instead of ON. Refer to Step 5.2.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
•
•
Check connections or change to another electrical outlet.
Push and hold the button on the back of the left ‘wing’ for 2 seconds to turn the Nursery Unit ON.
WEAK RECEPTION
•
•
•
•
Bring units closer together.
Change the position of one or both units.
Place units on a flat surface away from baby’s reach.
Recharge the Parent Unit.
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC.)
•
Rotate Parent Unit or move it away from source of interference.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
•
•
Move units farther apart (at least 3 meters).
Decrease volume on Parent Unit.
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
•
•
Turn the Parent Unit back ON by pushing and holding the POWER ON/OFF button for 2 seconds.
Recharge the Parent Unit.
17
LIMITED WARRANTY
Angelcare® warrants to the original owner of this
product that Angelcare® video, movement and sound
) is free from any material
monitor (model
and workmanship defects, for a period of
()
year from the date of the original purchase. If this
monitoring system fails to function properly when
used as directed under normal conditions within the
year period, Angelcare® will either repair or
replace the product, at our discretion, free of charge.
Please contact your distributor.
This warranty does not cover products and
accessories which are not Angelcare-branded, or
any problems that result from usage that is not in
accordance with product instructions, failure to
follow the product instructions, or problems caused
by using accessories, parts or components not
supplied by Angelcare.
LEGAL RIGHTS VARY FROM COUNTRY TO
COUNTRY. SOME COUNTRIES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
The product must be accompanied by a proof
of purchase, either a bill of sale or other proof
that the monitoring system is within the warranty
period. Angelcare® will bear the cost of repairing or
replacing the product and shipping it back to you.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY
OUTCOME RESULTING FROM THE USE OF THIS
PRODUCT.
This warranty does not apply to a product which
has been damaged as a result of improper
maintenance, an accident, improper voltage supply
or any other form of misuse. The warranty is also
void if the owner repairs or modifies the product in
any way. Angelcare® is not liable for any incidental
or consequential damages with regard to this
product. The warranty also excludes any liability
other than what is stated above. No other warranty
is given.
IMPORTANT! This Angelcare® monitor is a personal
care product. Please do not return this product
to the store. If you have questions or need help,
please call your distributor before returning this
product.
TECHNICAL SPECIFICATIONS
Range:
Open field (Open area without obstructions):
up to 250 meters.
Number of Channels:
USA/Canada: 19 channels.
Europe: 64 channels.
Power Supply:
1 included Li-Ion battery (parent unit)
100 - 240 VAC / 5 VDC adapter for the parent unit
100 - 240 VAC / 5 VDC adapter for the camera
Caution: To reduce the risk of electric shock, do
not expose this product to rain or moisture.
Danger of explosion if batteries are incorrectly
replaced. The battery included for the Parent Unit
is a user replaceable Li-ion rechargeable battery,
manufactured by SPRINGPOWER TECHNOLOGY
(SHENZHEN) COMPANY LIMITED. Only use the
Angelcare recommended replacement battery.
To obtain information on replacement batteries
please contact Angelcare customer service:
www.angelcarebaby.com or contact your local
distributor. Instructions will be included with
the replacement battery. Dispose of exhausted
batteries properly according to your local
ordinances. Keep all batteries away from children.
PROTECT THE ENVIRONMENT
This electronic equipment contains reusable
material and must not be disposed with
domestic waste. Please take it to a collecting
point for electric and electronic equipment
(ask your local authorities for details).
18
Batteries:
•
DO NOT mix old and new batteries.
•
DO NOT mix alkaline standard
(carbon-zinc), or rechargeable
(NI-CD, NIMH, etc.) batteries.
•
Parent unit Li-ion battery information:
Model: SP454543
Rating: 3.7V, 1000mAh
Transmission:
Data transmission between the Parent
Unit and the Nursery Unit is made on the 2.4GHz
frequency.
Hereby, Angelcare Monitors Inc., declares this
baby monitor is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.
The EU declaration of conformity can be obtained
at: www.angelcarebaby.com.
www.angelcarebaby.com
IMĂāĆġINT-ĀĂĂĉāĈ

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:03:03 11:21:27+08:00
Modify Date                     : 2017:05:12 10:54:41+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2017:05:12 10:54:41+08:00
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Format                          : application/pdf
Document ID                     : uuid:0c4a8847-25a1-489a-ad1a-d84ec2448ff6
Instance ID                     : uuid:5bda5e09-123a-4d24-bbdd-fad8566fe4b9
Page Count                      : 19

EXIF Metadata provided by EXIF.tools