AngioDynamics UK AS0670 Diomed RFID Module type AS/0670 User Manual 563545

Download:
Mirror Download [FCC.gov]
Document ID	563545
Application ID	kVsfRXWtatUQZbiIgnNqUw==
Document Description	Module user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	4kB (49951 bits)
Date Submitted	2005-07-20 00:00:00
Date Available	2005-09-29 00:00:00
Creation Date	2005-07-20 06:55:31
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-07-20 06:55:31
Document Title	Microsoft Word - 563545.DOC
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

AS/0670 Module User Manual
Introduction
The AS0670 Module is a RFID transceiver used to identify accessories attached to Diomed Lasers.
It must only be fitted by Diomed Ltd in Diomed Lasers, and in accordance with this guide.
General Requirements
Power Supply:
5V dc +/- 0.25V, 50mA
The mains input to the power supply must be filtered and comply with the
requirements of EN60601.1.2
Screening:
A ground plane and de-coupling capacitors on the PCB ensures that no
additional screening is required around the module.
There should be no enclosure screening directly in front of the antenna coil
or the field will not radiate outside of the Laser.
Frequency
The operating frequency must be checked after installation in the Diomed
Laser and if necessary fine tuned to 125kHz +/- 1kHz using the trimmer
capacitor on the module.
Antenna:
This is a fixed coil soldered to the PCB and must be installed in the vertical
plane to ensure compliance.
Signal Cable
Maximum length:
Cable type:
Connector type:
Labelling
The outside of the Laser must be labelled in accordance with FCC and
Industry Canada rules.
Operator Manual
The Laser’s Operator Manual must contain the EMC warnings in
accordance with FCC and Industry Canada rules.
0.7m
6 way ribbon cable 7/36 AWG, 1.27mm pitch.
MMT 6way male (e.g. Farnell part no. 149-068)
Signal Requirements
Name
CFE
Output
/OE
Function
Data In
Data Out
Output Enable
Vin high
3.0min
2.4V min
Vin low
0.8Vmax
0.5Vmax
Vout high
2.4V min
Vout low
0.5Vmax
Connections
Connector (J1)
Pin
Name
P5V
0V
0V
CFE
Output
/OE
Page 1 of 1
Function
+5V
0V
0V
Data In
Data Out
Output Enable
Author: C.E. Daily, Diomed Limited.
15 July 2005

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2005:07:20 06:55:31-04:00
Modify Date                     : 2005:07:20 06:55:31-04:00
Page Count                      : 1
Creation Date                   : 2005:07:20 10:55:31Z
Mod Date                        : 2005:07:20 10:55:31Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Administrator
Metadata Date                   : 2005:07:20 10:55:31Z
Creator                         : Administrator
Title                           : Microsoft Word - 563545.DOC

EXIF Metadata provided by EXIF.tools