Anhui Huami Information Technology A1603 Balancing scooter User Manual rocky 160817 v3 4

Anhui Huami Information Technology Co.,Ltd. Balancing scooter rocky 160817 v3 4

Users Manual

72User Guide1. Wristband 2. Charger 3. User GuidePackage ContentsDownload The Amazfit AppThe Amazfit app is available for iOS in the Apple App Store and for Android in the Google Play Store, please search for “Amazfit” and install the app.Or visit www.amazfit.com/setupConnect Your DeviceMake sure you have Bluetooth activated on your phone, open the Amazfit app and follow the instructions in the app to connect it to your activity tracker. When the unit vibrates and receives notification on the display, press the button to complete the pairing process.ChargingLet’s make sure your unit is not low or out of battery. To check the status, tap the screen at the horizontal bar. If the screen remains blank or indicates low battery, please make sure to charge the unit first before continuing with the setup.ChargingLow battery Fully chargedUsing Your DeviceAfter pairing, your device will start to track and analyze your movements and sleep patterns. Pressing the button below the display will allow you to check the current time, track your steps and monitor your heart rate. While measuring heart rate please keep your arm stable.Steps Heart rateTimeDevice InformationProduct name: Amazfit ArcConnection type: Bluetooth 4.0 BLEWater and dust resistance rating: IP67Adjustable length: 155mm~230mmInput voltage of wireless charger base: 5V DC Device support: iPhone 4S or later with iOS 9.0 or above, Android 4.4 or above supporting Android smart phones with Bluetooth 4.0 Regulatory NoticeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.Note:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.FCC ID : 2AC8UA1603Safety NoticeDo not attempt to force open the sensor. Substances contained in this product and/or its battery may damage the environment and/or human health if handled and disposed of improperly.Do not attempt to disassemble your device.Do not expose your device to extremely high or low temperatures.Do not leave your device in direct sunlight for extended periods of time.Do not use your device in a sauna or steam room.Built-in Battery PrecautionsDo not attempt to replace the device’s battery on your own or force open the built-in battery. Use only the official cable to charge your device.Disposal and Recycling InformationThe symbol signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources.Certifications and Safety ApprovalsAll Amazfit products have been FCC and CE certified and meet the standards required to retail in the US and Europe.2485 Old Middlefield Way, Suite 30, Mountain View, CA 94043All Amazfit products are covered by a 12-month limited warranty. Details at: www.amazfit.com/returnsOfficial website: www.amazfit.comHelp: www.amazfit.com/supportEmail us at: support@amazfit.com2016 Huami Inc. All rights reserved.CopyrightWarranty and Return Policy Product model: A1603Battery capacity: 70mAhTypical input current: 45mA Operating temperatures: 0°C~45°C 纸 品 与 工 艺 ：太 空 梭 1 0 5 g 哑 光 铜 ，印 刷 过 哑 油 ，首 页 l o g o 过 U V印刷色：黑色 Pantone Black C折 页 方 式 ：风 琴 折Regulatory NoticeThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1)This device may not cause interference, and(2)This device must accept any interference, including interference that may cause undesired operation of the device.IC : 21806-A1603 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.ICAN ICES-3 (B)/NMB-3(B)

Navigation menu