Anker Innovations T8300C eufy Security SpaceView (Camera with FHSS) User Manual
Anker Innovations Limited eufy Security SpaceView (Camera with FHSS)
user manual
FCC ID:2AOKB-T8300C User Manual Anker Innovations Limited. All rights reserved. Eufy and the Eufy logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005001157 V01 eufy Security SpaceView Baby Monitor Tabel of Content What’s in the Box 01 Feature Introduction 02 Setting Up the Camera and Monitor 03 Monitor Installation 03 Replacing the Camera lens 06 Safety 07 Customer service 10 What’s in the Box Feature Introduction Monitor Features: Baby Monitor (T8300-C) Baby Camera (T8300-M) Camera Stand 10 11 12 Monitor Micro-USB Power Cable (1.5 m) Monitor Adapter (5V 2A) Camera Micro-USB Power Cable (3 m) Screw Kit Wide-Angle Lens Power adapter varies by region. 01 Camera Adapter (5V 2A) User manual 13 Volume controls microSD card slot Screen Support stand Power button 10 Micro USB charging port Menu button 11 LED indicator Navigation buttons 12 Microphone Return to previous level 13 of menu / Talk button Monitor Antenna Speaker Press and hold the Talk button to speak to the camera. When Menu is opened, press Talk button once to return to previous level of menu. Press Power button to switch on / off the monitor screen. Press and hold the Power button for 2 seconds to switch on / off the monitor. 02 Camera Features: charge it. Press and hold the power button for 2 seconds to turn the baby monitor on. Camera Installation Standard camera lens Speaker Microphone Micro USB port Power LED Status indicator Pairing button Setting Up the Camera and Monitor Monitor Installation Fully charge the monitor before use. To charge: Connect the baby monitor to the monitor adapter with the Micro USB cable, and then connect the adapter to a power outlet. Connect the other end of the baby monitor’s Micro USB power cable to the Micro USB port in the monitor to 03 Connect the baby camera’s Micro USB power cable to the camera adapter (5V 2A), and then connect the adapter to a power outlet. Finally, connect the other end of the baby camera’s micro USB power cable to the micro USB port in the camera. Camera Placement (on the Wall Mount) 1. Use the monitor to test the viewing angle from your desired mounting spot. 2. Mark the screw holes with a pencil. 3. Drill 1/5” holes into the wall and then insert the anchors into the holes. 4. Insert the screws through the mounting holes of the base and screw into the anchors. 5. Place the camera on the base. 04 Replacing the Camera lens Lens type Usage Demonstration Standard camera On-screen Menu Icons Icon This lens is lens (default lens) recommended for general viewing; infants are clearly seen within a 2~3m range. The lens angle of view for standard camera lens is 62°. Icon Description Wireless signal strength Night Vision Mode is enabled Shows the camera that is currently presenting on the baby monitor screen Cycle Cameras enabled Wide-angle lens This lens provides a wide-angle view of the room. The lens Back angle of view for wide-angle lens is 110°. Front Temperature Alert enabled / Sound Alert enabled 27°C Ambient temperature of the room the camera is in Sound level of the room the camera is in 17: 30 05 The standard camera lens is not removable. When you want to use the wide-angle lens, simply place it over the standard camera lens and fasten. Current time Current battery level of the baby monitor 06 Safety Warning Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. with a temperature that ranges from -10°C~45°C. Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the phone and the guarantee article. 3. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. 4. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. This product can be used across EU member states. 6. Operating Frequency Range: 2410-2477MHz The product shall only be connected to a USB Interface of version 2.0 or higher. 7. The charger output voltage/current is 5Vdc/2A. The plug considered as disconnect device of adapter. 1. The adapter shall be installed near the equipment and shall be easily accessible. 8. If you use a third-party charger, the recommended output voltage/current of the adaptor is 5Vdc/2A,and the adapter shall be CE approval type. This device in compliance with the essential 2. Do not use the product in the environment at too high or too low temperature, never expose the mobile phone under strong sunshine or too wet environment. The suitable temperature for the product and accessories is -20°C-60°C. When charging, please place the product in an environment that has a normal room temperature and good ventilation. It is recommended to charge the product in an environment 07 9. The following importer is the responsible party (contact for EU matters only) Importer:Anker Technology (UK) Ltd Importer Address:Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham,United Kingdom B11 2AA 08 This product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. T. he following importer is the responsible party (contact for FCC matters only) Company Name: POWER MOBILE LIFE, LLC Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541 Telephone:(206)383-8247 Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 09 10 Customer service • Warranty 12-month limited warranty • Call Us United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 • Email Us Customer Support: support@eufylife.com 11 FCC Radio Frequency Exposure Statement The T3800-C device has been evaluated to meet general RF exposure requirements. The T3800-C can be used in fixed exposure condition. The min separation distance is 20cm. This T3800-M was tested for typical body‐worn operations with the back of the handset kept 0 mm from the body. RF Exposure Information(SAR) The Extremity SAR limit of FCC for Hand held is 4.0W/kg. Device is recommended to use in hand held only and SAR when hand held is 1.804W/kg Worn on body will have unexpected RF exposure RISK. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Create Date : 2018:08:10 14:46:57+08:00 Metadata Date : 2018:08:21 09:02+08:00 Modify Date : 2018:08:21 09:02+08:00 Creator Tool : Adobe InDesign CC 2014 (Windows) Instance ID : uuid:46f3b70a-1e13-47f4-99f2-c53d9478bdf3 Original Document ID : xmp.did:320a0df4-e8ec-4d4c-8969-6b4ce2e73b67 Document ID : xmp.id:c0b4cabe-ffd8-1844-8402-ed3c612307dc Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:c6414f9d-93f5-a24d-b141-1c459db433bb Derived From Document ID : xmp.did:6b65d3a5-945a-1349-9e06-f88babb00e1d Derived From Original Document ID: xmp.did:320a0df4-e8ec-4d4c-8969-6b4ce2e73b67 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Windows) History Changed : / History When : 2018:08:10 14:46:57+08:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC 2014 (Windows)EXIF Metadata provided by EXIF.tools