Anker Technology 98AN01BA Anker Wireless Mouse Black NO.01(ET-2240) User Manual

Anker Technology Co., Limited Anker Wireless Mouse Black NO.01(ET-2240) Users Manual

User manual

2.4G user manualBefore use:1. Find the wireless mouse and Nano receiver in package2. Plug Nano receiver to USB port on PC3. 1PCS AA battery into Mouse body Properly4. LED indicator will keep flash for few seconds, the Mouse is ready to work.Advanced function1. CPI adjustable functionWith 5 adjustable CPI 800/1200/1600/2000/2400, factory setting is 1200CPI. Pressthe switch button on top of Mouse can easy to adjust CPI. LED indicator willflash one time while it converting to 800CPI, LED will flash twice while itconverting to 1200CPI, LED will flash three times while it converting to 1600CPI.2. Saving power mode and power switch offIf mouse is stay out of work for 8 minutes, it will turn to power saving mode,press any button to restart it.If you turn off PC or take out Nano receiver from USB port, press any button ormove the mouse to enter the power saving mode,3, Nano receiverA very small size design for Nano receiver, it can be plug and stay on USB portof PC/Notebook without interference.Portable design for travel, Nano receiver can be plug in the slot on bottom ofmouseReconnectionBoth of mouse and Nano receiver has a built-in code, It can be setting one mouseto one receiver, or few of mouse to one receiver. Mouse and receiver need toreconnect under the condition of High temperature, high magnetic, strong vibrate.1. Plug off nano receiver from USB port, and plug it on2. Reinstall the battery3. You can use it by reconnectionRemarkDesign by approval IR motion detect technologyData transfer by 2.4G wireless connection in 10 meters operating range, workingrangewilllessthan10metersifthereisphysicsbothered.CautionAny amendment unauthorized is not allowing.The manual of Japanese version will be supplied in Japanese as well at the time of use.FCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interferencethat may cause undesired operation.Warning: Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there isnoguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouragedtotry to correct the interference by one or more of the following measures:　 Reorient or relocate the receiving antenna.　 Increase the separation between the equipment and receiver.　 Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.　 Consult the dealer or an experienced radio/TV technician for help.

Navigation menu