Anker Technology A2522 PowerWave 7.5 Stand User Manual
Anker Technology Co., Limited PowerWave 7.5 Stand
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3729167 |
| Application ID | kl6KkPAOn++RFctNJlil+A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.49kB (218565 bits) |
| Date Submitted | 2018-01-25 00:00:00 |
| Date Available | 2018-01-26 00:00:00 |
| Creation Date | 2018-01-03 15:33:40 |
| Document Lastmod | 2018-01-03 15:33:40 |
| Document Title | User Manual |
| Document Creator | WPS Office |
| Document Author: | win7 |
LED Indicator Status Solid blue for 3 seconds, then off Connected to power Solid blue Charging mobile device Flashing blue - Metal or abnormal temperature detected - Using a non-Quick Charge™ 3.0 wall charger ● ● For the fastest and safest charge, use the supplied Anker® charger or a charger compliant with the Quick Charge™ 3.0 Standard (supporting 12V). Other chargers may not work well with this device. Using an ultra-thick protective phone case or a case with a magnetic/iron plate is not recommended as it may affect the wireless charging function. Important Safety Instructions ● ● ● Avoid dropping. Do not disassemble. Do not expose to liquids. ● For the safest and fastest charge, use original or certified cables. ● ● ● ● This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40°C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 10 cm between the radiator & your body. IC Statement This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS‐216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES‐003 (Cet appareil numérique de la Classe B conforme à la norme NMB‐003 du Canada). Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Specifications Input 12V == 1.5A Output 4.75W Size 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in Weight 142g/5oz Product Number: A2522 Wireless Charger Indoor use only The product shall not be disposed together with the normal waste. It must be recycled. EN: Customer Service IT: Servizio Clienti EN: 18-month Limited Warranty IT: Garanzia valida 18 mesi EN: Lifetime Technical Support IT: Assistenza post-vendita a vita rial iaAR: ili al 18 ilAR: ill i l l AR: Anker Technology Co., Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong Declaration of Conformity Hereby, Anker Technology Co., Limited declares that the product type A2522 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/products +1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT) +44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT) +49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 - 11:00 +81 03 4455 7823 (日本) 月-金 9:00 - 17:00 +86 400 0550 036 (中国) 周一至周五 9:00 - 17:30 For FAQs and more information, please visit https://www.anker.com/support
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 4 Author : win7 Comments : Company : Create Date : 2018:01:03 15:33:40+07:33 Creator : WPS Office Modify Date : 2018:01:03 15:33:40+07:33 Producer : Source Modified : D:20180103153340+07'33' Subject : Title : Trapped : falseEXIF Metadata provided by EXIF.tools