Anker Technology A7811 2.4GHz Wireless Mouse User Manual SM 608AG H383 P3205

Anker Technology Co., Limited 2.4GHz Wireless Mouse SM 608AG H383 P3205

Users Manual

Model:SM-608AGThe RF2.4GHz optical mouse use two AA alkaline batteries.Nano receiver*This mouse is equipped with Traveling-Power-Save function.When you are traveling with this mouse, the LED of the mouse will be switched offautomatically for the purpose of power-save, but the pre-condition is that thereceiver is disconnected with your notebook or PC.* when your mouse no any clik or scroll or moving, the mouse will come to sleepstate for the economize after about 8 minutes, for the wake up, you can click anybutton for thisYour optical 6 button mouse is provide 800&1200&1600 dpi switch.1:when you want use the mouse ,you can take out the receiver to computer by thelist step;2:when you need stop the work or to travel, you can store the receiver on the mousefor the moving by the list step.DPI Switch1.Connect the USB plug nano to USB port of the computerFCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that maycause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.

Navigation menu