Anker Technology R5121 Roav Smart Car-Charger Spectrum User Manual Users manual
Anker Technology Co., Limited Roav Smart Car-Charger Spectrum Users manual
Users manual
Roav Smart Car-Charger Spectrum
Safety
Instructions
Please read and understand all instructions before using this product.
If damage is caused by failure to follow the instructions, the warranty
does not apply.
• Keep these instructions.
• Do not drop, puncture or disassemble this product.
• This product shall not be exposed to dripping or splashing liquids.
• Avoid long exposure to direct sunlight, which may cause damage.
• Exposing this product to open flames may cause explosion.
• Do not use the product in strong magnetic fields.
• Use a clean, soft cloth to clean. Do not use any corrosive cleaner/
oil to clean.
Introduction
Features
• USB PowerIQ car charger by ANKER.
• USB Quick Charge 3.0 car charger by ANKER.
• Companion Roav VIVA app with car battery monitor and car locator.
• Customize the colors of LED ring indicator via Roav VIVA app to
indicate dierent status.
What’s Included
Owner’s Manual
At a Glance
USB charging port (PowerIQ 2.0)
USB charging port (Quick Charge 3.0 + PowerIQ 2.0)
LED ring indicator
Car charger adapter
Get Started
Download the Roav VIVA app from the App Store (iOS devices) or
Google Play (Android devices).
ROAV VIVA
Plug Roav Smart Car-Charger Spectrum into your vehicle’s cigarette
lighter socket.Start the engine and Roav Smart Car-Charger Spectrum
will automatically power on.
Open the Roav VIVA app and follow the instructions to connect
the device via Bluetooth. Enable Bluetooth on your smartphone and
search for Bluetooth devices available. Select “Roav Spectrum_XXX”
and connect. Once connected, the LED ring indicator will turn blue
by default.
Roav
Spectrum
_XXX
Now you can locate your car, set a parking timer, check your
vehicle’s car battery, customize the colors of LED ring indicator, and
find out more via Roav VIVA app.
Owner’s Manual
Model: R5121
51005000734 V01
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected. (4) Consult the dealer or
an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20cm.
Qualcomm Quick Charge is a product of Qualcomm Technologies, Inc.
Qualcomm and Quick Charge are trademarks of Qualcomm
Incorporated, registered in the United States and other countries. All
Qualcomm Incorporated trademarks are used with permission.
Apple and the Apple logo are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries.Google Play and the Google
Play logo are trademarks of Google Inc.
Customer
Service
18-month limited warranty
Lifetime technical support
support@goroav.com
+1(800) 988 7973 (US) Mon-Fri 9:00-17:00 (PT)
@GoRoav @GoRoav
© Anker Technology Co., Limited. All rights reserved. ROAV and the
ROAV logo are trademarks of Anker Technology Co., Limited, registered
in the United States and other countries. All other trademarks are the
property of their respective owners.
Charge Your
Devices
The Roav Smart Car-Charger Spectrum contains dual USB charging ports.
You can charge two devices at the same time with maximum output
power of 30W.
Charge Your
Devices
Specifications are subject to change without notice.
DC input: 12V-24V
Standard output: 5V 2.4A
Quick Charge 3.0 output: 3.6V-6.5V 3A, 6.5V-9V 2A, 9V-12V 1.5A
Total Wattage: 30W
Bluetooth version: V 4.1
Operating temperature range: -4°F to 104°F / -20°C to 40°C
Storage temperature range: -40°F to 185°F / -40°C to 85°C