Ansen Electronics Co 0614RX Receiver unit for RF wall clock User Manual Unknown
Ansen Electronics Co Receiver unit for RF wall clock Unknown
Manual
FCC ID: L5C0614RX 0614-0 Jumbo Wall Clock with Remote Sensor TO SET THE TIME 1. Slide the selector to TIME SET. This causes the hour and minutes digits to flash on the display 2. Press HOUR to increase the hour digits and MIN to increase the minute digits. Holding down either button changes its setting at high speed. Though the seconds are not displayed, they reset to 00 when you press HOUR or MIN. 3. Afier you set the time, change the selector to NORMAL. Press 12/24 to switch between 12-hour and 24-hour format. TO SET THE DATE 1. Slide the selector to DATE SET, This causes the year, month and date digits to flash on the display. 2. Press MON TH to increase the month digits, DATE to increase the date digits. YEAR to increase the year digits. Holding down either button changes its setting at high speed. 3. Alter you set the date, change the selector to NORMAL. THERMOMETER FUNCTIONS 0 A built-in sensor measures temperature and shows the measured value on the display. The readout from the temperature sensor can also be switched between Celsius (°C) and Fahrenheit (“P"). 0 Above range the display shows EL, below range the display show L0. SWITCEENG BETWEEN CELSIUS AND FAHRENHEIT Push °Cl°F to select either Celsius (°C) or Fahrenheit (°F). REMOTE SENSOR 1. The Unit Code must set to l. 2. Press TEST button once, the Sensor will detect temperature immediately. 3. If the LED flash repeat every one second, that means the battery need replace. RE MARK * User can not modify this product.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Creator : Create Date : Wednesday, May 17, 2000 4:50:24 PM Title : Unknown Author : HKSTC Preferred User Producer : Acrobat PDFWriter 3.0 for Windows Subject : Modify Date : 2000:05:17 16:50:59 Page Count : 1EXIF Metadata provided by EXIF.tools