Ansen Electronics Co R088G0 Bluetooth Diamond Speaker/LYRIX POWERBALL User Manual IM R088G0 BT Diamond

Download:
Mirror Download [FCC.gov]
Document ID	2052053
Application ID	FE5g7NBPNIUiX4ZWDl2kVw==
Document Description	L5CR088G0_User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.23kB (15325 bits)
Date Submitted	2013-08-23 00:00:00
Date Available	2013-08-26 00:00:00
Creation Date	2017-10-26 04:19:23
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-26 04:19:23
Document Title	Microsoft Word - IM-R088G0 BT Diamond
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Bluetooth Mono Speaker (Diamond)
User Manual
Play from a Bluetooth device
Note: The effective operation range between the speaker and your Bluetooth device is
approximately 10 meters (33 feet) line of sight maximum
Pull out the front cover from the speaker
Slide the Power [ON/OFF] switch to “ON” to turn on the speaker
The blue LED indicator will flash
Activate the Bluetooth function in your Bluetooth device
Select “Lyrix Powerball” on your Bluetooth device for pairing
When connected, the blue LED indicator stays steadily on
Start music play on your Bluetooth device
Adjust volume on your Bluetooth device or press the [+] or [-] button on the speaker
To next song/ To Previous song, please press [>>l] / [l<<] for 2 seconds
Press [Play/Pause] button on the speaker to play or pause music
Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving
Play from an external device
- Pull out the front cover from the speaker
- Slide the Power [ON/OFF] switch to “ON” to turn on the speaker
- Connect your speaker with an external device through a 3.5mm cable (not supplied)
Start music play on your device
Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving
Power Supply
The speaker operates on built-in rechargeable battery
To recharge the built-in battery, connect micro USB socket with PC through supplied USB
cable
Charging:
Red LED indicator turns on
Fully Charged: The red LED turns green when it is fully charged
(Low battery:
Red LED indicator flashes)
Specification
Rated output power:
DC Power input:
Bluetooth specification:
Supported Bluetooth Profiles:
Range:
Working temperature:
1.6W RMS
USB: 5V, 500mA
V3.0 + EDR
AVRCP, A2DP
maximum 10 meters (33 feet) line of sight
0C – 50C
Troubleshooting
No power:
Recharge your speaker
No Sound:
Adjust volume on your Bluetooth device or the speaker
Make sure that your Bluetooth device is connected with the speaker and they are within the
effective operation range
Cautions:
1) Due to the used enclosure material, the device shall only be connected to a USB Interface
of version 2.0 or higher. The connection to so called power USB is prohibited
2) Caution Risk of explosion if battery is replaced by an incorrect type.
3) Dispose of used batteries according to the instructions
4) Do not expose the device to an extremely high electromagnetic filed, this may impair the
correct functioning of the device.
5) The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product to resume normal operation by following the
instruction manual. In case the function could not resume, please use the product in order
location.
FCC Statements
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct
The interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received,
including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. such modifications could void the user’s authority to operate this
equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Administrator
Create Date                     : 2013:08:16 09:08:13+08:00
Modify Date                     : 2013:08:16 09:08:40+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : Microsoft Word - IM-R088G0 BT Diamond
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:08:16 09:08:40+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:2c75fe10-2b75-474d-a7f6-8970d1831bd3
Instance ID                     : uuid:75c91950-46cd-428d-bdc2-e551f436ba79
Page Count                      : 3

EXIF Metadata provided by EXIF.tools