Ansen Electronics Co W186TX-F Thermo-Hygro Sensor with Display User Manual W186 F manual 29July08

Download:
Mirror Download [FCC.gov]
Document ID	978762
Application ID	iYIyHDHRtVxtBdvHecwq2Q==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.31kB (16351 bits)
Date Submitted	2008-07-31 00:00:00
Date Available	2008-07-31 00:00:00
Creation Date	2008-07-29 16:43:42
Producing Software	pdfFactory v1.57 (Windows XP Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	Microsoft Word - W186-F_manual 29July08.doc
Document Creator	pdfFactory http://www.pdffactory.com
Document Author:	cee3

LOW COST REMOTE THERMO-HYGRO SENSOR WITH DISPLAY
(MODEL NO. W186-F )
OWNER'S MANUAL
Name and Functions of Switch and Buttons:
CH
Select Channel 1,2,3
TX
Force transmission of RF signal
C/F
Select the reading between C and F
BATTERY INSTALLATION
Lift off the bracket stand, loose the 4 screws with a small screwdriver, insert 2 pcs
AAA batteries according to the polarity indicated.
Replace the cover and tighten
the screws.
SETTING UP THE WIRELESS THERMOMETER:
•
For the first installation, always insert batteries to the home unit and then the
remote sensor.
•
Set Channel 1 for the first remote sensor. Set channel 2 and channel 3 for the
additional 2nd and 3rd sensors.
•
Press the Tx button on the back of remote sensor to verify the RF reception.
Remark : 3 different sensor is using the same frequency , but different pulses.
C/ F SELECTION
Press “C/F“ to select degree C/ degree F on the LCD display.
LOW BATTERY INDICATION
Low battery indication is available for the remote sensors. Replace the batteries and
follow the setup procedure as mentioned in this instruction manual if the low battery
indicator is shown.
BATERY DISPOSAL
Replace only with the same or equivalent type recommended by the manufacturer.
Page 1 of 2
Please disposal of old, defective batteries in an environmentally friendly manner in
accordance with the relevant legislation.
Attention should be drawn to the environment aspects of battery disposal.
-Symbol
equipment.
indicating separate collection for electrical and electronic
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
SPECIFICATIONS
Range of temperature measurement:
Remote sensor
-20 C to +60 C (-4 F to +140 F)
Channel
Transmission
Resolution
max. 3 remote sensors
up to 75M (246 ft.) in open area when upper display is off
0.1 degree for temperature, 1% for humidity
Batteries
AAA x 2 pcs
Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : Microsoft Word - W186-F_manual 29July08.doc
Author                          : cee3
Creator                         : pdfFactory http://www.pdffactory.com
Producer                        : pdfFactory v1.57 (Windows XP Chinese)
Create Date                     : 2008:07:29 16:43:42
Page Count                      : 2

EXIF Metadata provided by EXIF.tools