AnyDATA Korea ADU-310C CDMA 1x/EVDO USB Modem User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1097205
Application ID	iqEYvZfVssWZWG/WTsO7iw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	153.98kB (1924712 bits)
Date Submitted	2009-04-15 00:00:00
Date Available	2009-04-15 00:00:00
Creation Date	2009-04-09 16:33:23
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-04-13 16:42:28
Document Title	Untitled1
Document Creator	PScript5.dll Version 5.2
Document Author:	UKL inc

전자 메일로 제출
ADU-310
(User Manual)
SW-ADU-310-UG-V1.2E
September 19, 2008
AnyDATA.NET USB Modem (User Manual)
AnyDATA CDMA Module Series Reference Design Specification
Copyright © 2008 AnyDATA Corp. All Rights Reserved.
Any part of this document may not be distributed, communicated, reproduced or transmitted in any form
or by any means, electronic or mechanical or otherwise, for any purpose, without the permission of
AnyDATA Corp.
This document can be subjected to revision without further notice.
Contact Address
AnyData.Net
Inc.(Korea)
e-mail: infodata@anydata.net
Rep:+82-31-380-7100
Fax:+82-31-476-6021
FCC Warning: RF Exposure to Radio Frequency Radiation
The radiated output power of this device is below the FCC radio frequency exposure
limits. Nevertheless, the device should be used in such a manner that the potential for
human contact during normal operation is minimized. In order to avoid the possibility of
exceeding the FCC radio frequency exposure limts, the gain of the external antenna
must not exceed 1dBi. This device is compliant with the parameters of Specific
Absorption Rate (SAR) government regulations.
AnyTime AnyPlace AnyWireless Data Solutions™
2/
AnyDATA.NET USB Modem (User Manual)
Contents
1. ADU-310 Features ..................................................................................................................................................... 4
2. LED Indicators ........................................................................................................................................................... 5
2.1 POWER ............................................................................................................................................................... 5
2.2 IDLE / BUSY ........................................................................................................................................................ 5
3. Program Installation ................................................................................................................................................... 6
3.1 Introduction .......................................................................................................................................................... 6
3.2 Minimum System Requirement ............................................................................................................................ 6
3.2.1 PC Hardware ................................................................................................................................................ 6
3.2.2 Operating System ......................................................................................................................................... 6
3.3 USB Driver Installation and Uninstall (Windows 2000) ........................................................................................ 7
3.3.1 USB Driver Installation (Automatic) .............................................................................................................. 7
3.3.2 USB Driver Installation (Manual) ................................................................................................................. 10
3.3.3 USB Driver Uninstall ................................................................................................................................... 18
3.4 USB Driver Installation and Uninstall (Windows XP) .......................................................................................... 20
3.4.1 USB Driver Installation (Automatic) ............................................................................................................ 20
3.4.2 USB Driver Installation (Manual) ................................................................................................................. 23
3.4.3 USB Driver Uninstall ................................................................................................................................... 29
3.5 USB Driver Installation and Uninstall (Windows Vista)....................................................................................... 31
3.5.1 USB Driver Installation (Automatic) ............................................................................................................ 31
3.5.2 USB Driver Installation (Manual) ................................................................................................................. 34
3.5.3 USB Driver Uninstall ................................................................................................................................... 42
3.6 Installing Easy Wireless Net Software ............................................................................................................... 44
4. Using Easy Wireless Net Program ........................................................................................................................... 48
4.1 Running the program ......................................................................................................................................... 48
4.2 Exiting the program ............................................................................................................................................ 49
4.3 Screen Display of Easy Wireless Net ................................................................................................................ 50
4.3.1 Executed Screen ........................................................................................................................................ 50
4.3.2 Descriptions of each icon ............................................................................................................................ 51
4.3.3 Setting Environment ................................................................................................................................... 52
4.3.4 Connecting to the Internet........................................................................................................................... 56
4.3.5 Disconnecting to the Internet ...................................................................................................................... 56
4.3.6 Sending and Receiving SMS ...................................................................................................................... 57
4.3.6.1 Writing New Message .................................................................................................................... 58
4.3.6.2 Viewing sent message ................................................................................................................... 60
4.3.6.3 Viewing received or saved message .............................................................................................. 61
4.3.7 Phonebook .................................................................................................................................................. 62
5. Troubleshooting ....................................................................................................................................................... 63
6. Quick Guide ............................................................................................................................................................. 66
6.1 Display Indicators .............................................................................................................................................. 66
7. Macintosh ................................................................................................................................................................ 67
7.1 Changing Preference OS from Windows system to MAC .................................................................................. 67
7.2 Supported Macintosh Versions .......................................................................................................................... 67
AnyTime AnyPlace AnyWireless Data Solutions™
3/
AnyDATA.NET USB Modem (User Manual)
1. ADU-310 Features
Antenna
LED
USB Connector
USB Connector Cap
AnyTime AnyPlace AnyWireless Data Solutions™
4/
AnyDATA.NET USB Modem (User Manual)
2. LED Indicators
2.1 POWER
Mode
Descriptions
RED
Modem power on state
OFF
Modem power off state
2.2 IDLE / BUSY
Mode
Descriptions
GREEN
Success to network acquisition (Idle state)
BLUE
Data call is connected
BLUE BLINK
Incoming not connected yet
OFF
No service or Searching the network
AnyTime AnyPlace AnyWireless Data Solutions™
5/
AnyDATA.NET USB Modem (User Manual)
3. Program Installation
3.1 Introduction
This section describes step-by-step method to install ANYDATA.NET USB MODEM and Easy Wireless
Net Software.
Note : Must install the software before connecting ANYDATA.NET USB MODEM to PC/Notebook.
3.2 Minimum System Requirement
3.2.1 PC Hardware
Recommend to use PC/Notebook at speed of 300 MHz or higher.
Minimum 233 MHz speed required, * Intel Pentium/Celeron products,
AMD K6/Athlon/Duron products or compatible processors
Recommend
Minimum
to
64MB
use
of
128MB
memory
RAM
must
or
be
higher
used,
but in this case the performance will be degraded and certain features will be limited.
At least 100 MB of free hard disk space is required.
Motherboard
or
PCI
card
that
supports
USB.
Video adaptor with Super VGA (800 x 600) or higher resolution and Monitor
CD-ROM or DVD Optical Drive
Keyboard and Mouse
3.2.2 Operating System
Windows XP Home or Professional ( with Service Pack 2 )
Windows 2000 (with Service Pack 3 for optimal performances)
Windows Vista
< Recommended parameters >
Windows Update : Keep your computer up to date
AnyTime AnyPlace AnyWireless Data Solutions™
6/
AnyDATA.NET USB Modem (User Manual)
3.3 USB Driver Installation and Uninstall (Windows 2000)
3.3.1 USB Driver Installation (Automatic)
1. The installation of the USB Wireless Modem Connect should run automatically upon selecting this
option on the menu of the Installation CD. Click "Install Modem Driver" on the menu, and click
"Next".
AnyTime AnyPlace AnyWireless Data Solutions™
7/
AnyDATA.NET USB Modem (User Manual)
2. The computer needs to restart after the driver installation completed.
AnyTime AnyPlace AnyWireless Data Solutions™
8/
AnyDATA.NET USB Modem (User Manual)
3. Connect the modem and PC`s USB port, and check if the driver is installed properly in
"Device Manager". See the followings to the location of "Device Manager"
[Start
Control Panel
System
Hardware Tab
Device Manager]
As shown in below with red boxed that shows "AnyDATA CDMA USB Modem" and
"AnyDATA CDMA USB Serial Device", the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
9/
AnyDATA.NET USB Modem (User Manual)
3.3.2
USB
Driver
Installation
(Manual)
The manual driver installation shall be required twice.
2. Installing "AnyDATA CDMA USB Serial Device" window will appear.
Select "Search for a suitable driver for my device (recommended)".
3. Press
button to move to next step.
AnyTime AnyPlace AnyWireless Data Solutions™
10/
AnyDATA.NET USB Modem (User Manual)
4. A window that displays a proper path of Driver will appear.
Select "CD-ROM drives" and press
button.
5. Select from the CD`s path  folder for appropriate OS.
AnyTime AnyPlace AnyWireless Data Solutions™
11/
AnyDATA.NET USB Modem (User Manual)
6. A window that searches "AnyDATA CDMA USB Serial Device" will appear.
7. Press
button to move to next step.
8. Process of installing "AnyDATA CDMA USB Serial Device".
AnyTime AnyPlace AnyWireless Data Solutions™
12/
AnyDATA.NET USB Modem (User Manual)
9. If the installation of "AnyDATA CDMA USB Serial Device" has been completed, following window will
appear.
AnyTime AnyPlace AnyWireless Data Solutions™
13/
AnyDATA.NET USB Modem (User Manual)
10. Next, it will install "AnyDATA CDMA USB
Modem".
11. Select "Search
(recommended)".
for
suitable
driver
for
12. Press
button to move to next step.
my
device
AnyTime AnyPlace AnyWireless Data Solutions™
14/
AnyDATA.NET USB Modem (User Manual)
13. A window that displays a proper path of Driver will appear.
Select "CD-ROM drives" and press
button.
14. Select from the CD`s path  folder for appropriate OS.
15. Press
button to move to next step.
16. Window that searches "AnyDATA CDMA USB Modem" will
appear.
AnyTime AnyPlace AnyWireless Data Solutions™
15/
AnyDATA.NET USB Modem (User Manual)
17. Press
button to move to next step.
18. If the installation has done properly, this window will appear.
This will complete the driver installation.
AnyTime AnyPlace AnyWireless Data Solutions™
16/
AnyDATA.NET USB Modem (User Manual)
19. Connect the modem and PC`s USB port, and check if the driver is installed properly in
"Device Manager". See the followings to the location of "Device Manager"
[Start
Control Panel
System
Hardware Tab
Device Manager]
As shown in below with red boxed that shows "AnyDATA CDMA USB Modem" and
"AnyDATA CDMA USB Serial Device", the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
17/
AnyDATA.NET USB Modem (User Manual)
3.3.3 USB Driver Uninstall
1. Disconnect the modem from USB port before uninstalling the driver.
2. By clicking on
under the driver folder in CD, this will start as shown below.
3. Select "Install" to uninstall the driver.
To stop removing the driver, select "Cancel".
AnyTime AnyPlace AnyWireless Data Solutions™
18/
AnyDATA.NET USB Modem (User Manual)
4. As shown below, click "Finish" then the driver will be uninstalled.
5. The computer must restart after the driver is uninstalled.
AnyTime AnyPlace AnyWireless Data Solutions™
19/
AnyDATA.NET USB Modem (User Manual)
3.4 USB Driver Installation and Uninstall (Windows XP)
3.4.1 USB Driver Installation (Automatic)
1. The installation of the USB Wireless Modem Connect should run automatically upon selecting this
option on the menu of the Installation CD. Click "Install Modem Driver" on the menu and click
"Insall".
AnyTime AnyPlace AnyWireless Data Solutions™
20/
AnyDATA.NET USB Modem (User Manual)
2. The computer needs to restart after the driver installation completed.
To restart the computer later, select "I want to manually reboot later".
AnyTime AnyPlace AnyWireless Data Solutions™
21/
AnyDATA.NET USB Modem (User Manual)
3. Connect the modem and PC's USB port, and check if the driver is installed properly in
"Device Manager". See the followings to the location of "Device Manager"
[Start
Control Panel
System
Hardware Tab
Devise Manager]
As shown in below with red boxed that shows "AnyDATA CDMA USB Modem" and
"AnyDATA CDMA USB Serial Device", the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
22/
AnyDATA.NET USB Modem (User Manual)
3.4.2
USB
Driver
Installation
(Manual)
The manual driver installation shall be required twice.
2. Installing "AnyDATA USB Modem Driver" window will appear.
Select "Install from a list or specific location (Advanced )".
3. Press
button to proceed.
4. A window that displays a proper path of Driver will
appear.
5. Select from the CD`s path  folder for appropriate OS.
6. Press
button to proceed.
AnyTime AnyPlace AnyWireless Data Solutions™
23/
AnyDATA.NET USB Modem (User Manual)
7. A window that searches "AnyDATA CDMA USB Modem" will appear.
8. Process of installing "AnyDATA CDMA USB Modem".
AnyTime AnyPlace AnyWireless Data Solutions™
24/
AnyDATA.NET USB Modem (User Manual)
9. If the installation of "AnyDATA CDMA USB Modem" has been completed,
following window will appear.
10. Next, it will install "AnyDATA CDMA USB Serial
Device".
11. Select "Install from a list or specific location (Advanced)".
AnyTime AnyPlace AnyWireless Data Solutions™
25/
AnyDATA.NET USB Modem (User Manual)
12. Press
13.
Select
button to proceed.
the
proper
path
from
the
CD
window
will
appear.
14. Select from the CD`s path  folder for appropriate OS.
15. Press
button to move to next step.
AnyTime AnyPlace AnyWireless Data Solutions™
26/
AnyDATA.NET USB Modem (User Manual)
16. Window that searches "AnyDATA CDMA USB Serial Device" will appear.
17. If the installation has done properly, this window will appear.
This will complete the driver installation.
AnyTime AnyPlace AnyWireless Data Solutions™
27/
AnyDATA.NET USB Modem (User Manual)
18. Connect the modem and PC's USB port, and check if the driver is installed properly in
"Device Manager". See the followings to the location of "Device Manager"
[Start
Control Panel
System
Hardware Tab
Devise Manager]
As shown in below with red boxed that shows "AnyDATA CDMA USB Modem" and
"AnyDATA CDMA USB Serial Device", the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
28/
AnyDATA.NET USB Modem (User Manual)
3.4.3 USB Driver Uninstall
1. Disconnect the modem from USB port before uninstalling the driver.
2. By clicking on
under the driver folder in CD, this will start as shown below.
3. Select "Install" to uninstall the driver.
To stop removing the driver, select "Cancel".
AnyTime AnyPlace AnyWireless Data Solutions™
29/
AnyDATA.NET USB Modem (User Manual)
4. As shown below, click "Finish" then the driver will be uninstalled.
5. The computer must restart after the driver is uninstalled.
AnyTime AnyPlace AnyWireless Data Solutions™
30/
AnyDATA.NET USB Modem (User Manual)
3.5 USB Driver Installation and Uninstall (Windows Vista)
The same will apply to Windows Vista 64bit.
3.5.1
USB
Driver
Installation
(Automatic)
2. Click "Install Modem Driver" on the menu.
AnyTime AnyPlace AnyWireless Data Solutions™
31/
AnyDATA.NET USB Modem (User Manual)
3. Select "Install" to install the driver.
4. The computer needs to restart after the driver installation completed.
To restart the computer later, select "I want to manually reboot later".
AnyTime AnyPlace AnyWireless Data Solutions™
32/
AnyDATA.NET USB Modem (User Manual)
5. Connect the modem and PC's USB port, and check if the driver is installed properly in
"Device Manager". See the followings to the location of "Device Manager"
[Start ▶ Control Panel ▶ System and Maintenance
▶ Devise Manager]
As shown in below with red boxed that shows "AnyDATA CDMA USB Modem" and
"AnyDATA CDMA USB Serial Device", the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
33/
AnyDATA.NET USB Modem (User Manual)
3.5.2 USB Driver Installation (Manual)
※ The manual driver installation shall be required twice.
2. Click "Locate and install driver software (recommended)" when shown in below.
3. Click "Continue" when "User Account Control" is shown.
4. Click "Don't search online" when shown below.
AnyTime AnyPlace AnyWireless Data Solutions™
34/
AnyDATA.NET USB Modem (User Manual)
5. Click "I don't have the disc. Show me other options." as shown
below.
6. Click "Brower my computer for driver software (advanced)".
AnyTime AnyPlace AnyWireless Data Solutions™
35/
AnyDATA.NET USB Modem (User Manual)
7. Click "Browse" and click "OK" as shown below.
8. "Installing driver software" will be shown as below.
AnyTime AnyPlace AnyWireless Data Solutions™
36/
AnyDATA.NET USB Modem (User Manual)
9. Click "close" when the driver will be installed successfully as shown below.
10. Click "Don't search online" when shown below.
AnyTime AnyPlace AnyWireless Data Solutions™
37/
AnyDATA.NET USB Modem (User Manual)
11. Click "I don't have the disc. Show me other
options."
12. Click "Brower my computer for driver software (advanced)".
AnyTime AnyPlace AnyWireless Data Solutions™
38/
AnyDATA.NET USB Modem (User Manual)
13. Click "Browse" and click "OK" as shown below.
14. "Installing driver software" will be shown as below.
AnyTime AnyPlace AnyWireless Data Solutions™
39/
AnyDATA.NET USB Modem (User Manual)
15. Click "close" when the driver will be installed successfully as shown below.
AnyTime AnyPlace AnyWireless Data Solutions™
40/
AnyDATA.NET USB Modem (User Manual)
16. Connect the modem and PC's USB port, and check if the driver is installed properly in
"Device Manager". See the followings to the location of "Device Manager"
[Start ▶ Control Panel ▶ System and Maintenance
▶ Devise Manager]
As shown in below with red boxed that shows "AnyDATA CDMA USB Modem" and
"AnyDATA CDMA USB Serial Device", the driver has been successfully installed.
AnyTime AnyPlace AnyWireless Data Solutions™
41/
AnyDATA.NET USB Modem (User Manual)
3.5.3 USB Driver Uninstall
1. Disconnect the modem from USB port before uninstalling the driver.
2. Click "Continue" when "User Account Control" is shown.
3. By clicking on
under the driver folder in CD, this will start as shown below.
4. Select "Install" to uninstall the driver.
To stop removing the driver, select "Cancel".
AnyTime AnyPlace AnyWireless Data Solutions™
42/
AnyDATA.NET USB Modem (User Manual)
5. As shown below, click "Finish" then the driver will be uninstalled.
6. The computer must restart after the driver is
uninstalled.
AnyTime AnyPlace AnyWireless Data Solutions™
43/
AnyDATA.NET USB Modem (User Manual)
3.6 Installing Easy Wireless Net Software
3. Press
button to proceed. By pressing
button, the installation of Easy
Wireless Net Program will stop.
4. Welcoming message for using Easy Wireless Net Program window will appear.
5. Press
button to proceed.
AnyTime AnyPlace AnyWireless Data Solutions™
44/
AnyDATA.NET USB Modem (User Manual)
6. Next window is related to License Agreement. Please read carefully.
7. Press "I Agree" button to advance to the next step.
8. Next window displays asking proper path for installing the program.
Default path is "C:\\Program Files\\AnyDATA\\Easy Wireless
Net"
AnyTime AnyPlace AnyWireless Data Solutions™
45/
AnyDATA.NET USB Modem (User Manual)
9. Press
button to install the program.
10. When program has been successfully installed, following window will display.
AnyTime AnyPlace AnyWireless Data Solutions™
46/
AnyDATA.NET USB Modem (User Manual)
11. Press
button for ending the program installation.
This is install the Easy Wireless Net Program.
 If modem is not connected to PC/Notebook and device driver is not installed, then the program will not
launch even after completion of installation program.
AnyTime AnyPlace AnyWireless Data Solutions™
47/
AnyDATA.NET USB Modem (User Manual)
4. Using Easy Wireless Net Program
4.1 Running the program
There are 2 (two) ways to run the installed Easy Wireless Net program. As shown below, either pressing
shortcut icon
on the Desktop or pressing
AnyTime AnyPlace AnyWireless Data Solutions™
this program.
48/
AnyDATA.NET USB Modem (User Manual)
4.2
Exiting
program
the
From the Easy Wireless Net program, by pressing
button will quit the program.
 If DUN is running, the program will end after the completion of these commands.
AnyTime AnyPlace AnyWireless Data Solutions™
49/
AnyDATA.NET USB Modem (User Manual)
4.3 Screen Display of Easy Wireless Net
4.3.1 Executed Screen
End & Minimize
Information
SMS, Phone
Book,
Configuration
Internet
Action Window
AnyTime AnyPlace AnyWireless Data Solutions™
50/
AnyDATA.NET USB Modem (User Manual)
4.3.2 Descriptions of each icon
Display
Function
RSSI Signal Strength Indicator
New message arrived.
Voice Mail arrived.
Voice Mail and New Message arrived.
Supports Hybrid mode
Only 1X mode available
Only EVDO mode available
USB connected
Roaming
Connected to the Modem
Either the cable is disconnected to the modem or
improper port connection.
Internet connected
Internet disconnected
AnyTime AnyPlace AnyWireless Data Solutions™
51/
AnyDATA.NET USB Modem (User Manual)
4.3.3 Setting Environment
There are 4 options and please refer to below for explanations.
[ About ] Tab
Display the version for Easy Wireless Net program.
AnyTime AnyPlace AnyWireless Data Solutions™
52/
AnyDATA.NET USB Modem (User Manual)
[ Basic ] Tab
The
basic
configuration
for
connect
to
the
network
using
EVDO
modem.
All values are set automatically, however if wants to change the value then check appropriate
box/boxes in the left and press
button to take effect.
UserName:
Password:
ServiceNum: Internet Connect Dial Number
AnyTime AnyPlace AnyWireless Data Solutions™
53/
AnyDATA.NET USB Modem (User Manual)
[ Advance] Tab
This part is to change the important parameter for EVDO modem.
If wants to change the value then check appropriate
box/boxes in the left and press
button to take effect.
Pref
Mode:
Select a mode among "1x only", "EVDO only" and "EVDO + 1X "
AnyTime AnyPlace AnyWireless Data Solutions™
54/
AnyDATA.NET USB Modem (User Manual)
[ User]
Tab
If wants to change the value then check appropriate
and press
box/boxes in the left
button to take effect.
Always Top:
The program window will be always top if "ON" is selected.
Battery Warning Sound:
Battery warning beep will sound when battery is low if "ON" is selected
AnyTime AnyPlace AnyWireless Data Solutions™
55/
AnyDATA.NET USB Modem (User Manual)
4.3.4 Connecting to the Internet
Must set proper UserName, Password, and ServiceNum in the above settings.
Then press
button, it will automatically connected to the Internet.
If the modem is trying to connect or connected to the Internet, this
above. If it cannot connect to the Internet, then
icon will appear as shown
icon will appear.
4.3.5 Disconnecting to the Internet
When user is ready to disconnect from the Internet, press
button to end the connection.
Please check the following if abrupt disconnection of modem occurred:
1) Did I intentionally disconnect USB modem?
2)
Are
cables
properly
connected?
3) Did I intentionally change Port number in environment settings?
4) Did I quit/exit the program?
AnyTime AnyPlace AnyWireless Data Solutions™
56/
AnyDATA.NET USB Modem (User Manual)
4.3.6 Sending and Receiving SMS
button.
As
seen
in
above,
there
will
be
three
buttons
(new message, sent message, and received message from the left).
Pressing each button will transfer to appropriate screen.
AnyTime AnyPlace AnyWireless Data Solutions™
57/
AnyDATA.NET USB Modem (User Manual)
4.3.6.1 Writing New Message
1) By pressing "Write Message" icon, the new window will appear for inserting the message.
2) Write the message in the window then press
button to move to the next step.
Note:
By pressing special characters that is highlighted,
that character will be written on the message window.
3) Input a phone number/numbers for sending SMS. It is possible to add upto 5 numbers.
By pressing a Phonebook, a separate window will appear to select phone numbers.
4) After inserting phone numbers, press
button to move to the next step.
AnyTime AnyPlace AnyWireless Data Solutions™
58/
AnyDATA.NET USB Modem (User Manual)
5) After selecting the number, press
button to send the message.
Sending Message has failed.
AnyTime AnyPlace AnyWireless Data Solutions™
59/
AnyDATA.NET USB Modem (User Manual)
4.3.6.2 Viewing sent message
1) By pressing "Outbox" icon, you will see a screen as below.
2) All sent messages will be shown.
3) Select the message then press
button to delete this message.
4) Select the message then press
button to display all the contents in the window.
5) By pressing
button, the selected message will be ready to send to a new number.
Message read.
Unread message.
Sent message.
Note: Description of icons.
AnyTime AnyPlace AnyWireless Data Solutions™
60/
AnyDATA.NET USB Modem (User Manual)
4.3.6.3 Viewing
message
received
or
saved
1) By pressing "InBox" icon, you will see a screen as below.
2)
All
received
messages
will
be
shown.
3) It will indicate whether the message was read or not.
4) Select the message then press
button to delete this message.
5) Select the message then press
By pressing
button to view the whole contents in the display.
button, the selected message will be ready to send to a new number.
Message read.
Unread message.
Sent message.
Note: Description of icons.
AnyTime AnyPlace AnyWireless Data Solutions™
61/
AnyDATA.NET USB Modem (User Manual)
4.3.7 Phonebook
This is a feature to store phone numbers that uses often into RUIM and to make calls accordingly.
By pressing Phonebook
button, following window will appear.
[8/20] Maximum number of Phone numbers can be stored and currently saved phone numbers.
Start searching.
All: Find and display any characters that matches from the Phone Number into a Phone
Number List
Index:
Finds
phone
number
based
on
the
index.
Name: Finds all names that contain any one of the letter to be searched.
Phone: Finds all numbers that contains any one of the number to be searched.
Sends SMS message to the selected phone number.
Calls selected number.
Deletes selected number.
Saves
Phone
Number
into
the
recorded
Index
number.
If the same Index number already exists then requires editing of the contents.
AnyTime AnyPlace AnyWireless Data Solutions™
62/
AnyDATA.NET USB Modem (User Manual)
5.
Troubleshooting
Q:
cannot
connect
to
the
Internet?
A:
proper ID, password and Service number, please contact service provider for more information.
Q:
A:
The
Internet
connection
speed
is
too
slow.
Internet is not connected as EVDO mode. EVDO icon must be appeared in the display to assure that
it has been connected as an EVDO mode.
Q:
A:
The
Internet
connection
is
poor
and
frequently
it
gets
disconnected.
you touch or block the USB modem with hand/body contact, the modem connection speed degrades.
Please be careful not to touch the modem with your hand or any part of the body.
Q: Can I leave the external power adopter in the electric socket even after the battery is
fully charged?
A:
using genuine battery and adopter from the manufacturer.
Q: No matter how long I pressed the power button, the power does not get turned off.
A:
then the power will not be tuned off.
Q:
All
of
the
display
on
the
program's
screen
shows
as
prohibited
A:
in the "environment setting" category.
Q: After the installation of the program, the program does not run and displays
following message
AnyTime AnyPlace AnyWireless Data Solutions™
63/
icons.
AnyDATA.NET USB Modem (User Manual)
A:
Q: During the running of the program, following message appears and the program halts.
A:
the cable is dismounted, cable is disconnected or USB modem power has been turned off. Then try to
reconnect the modem.
Q: Cannot make a call
A:
[EVDO] mode then try to make a call. There are three different icons in that field, [1X], [1X/EVDO] and
[EVDO].
Q: How many people can I send SMS messages at once?
A:
Q:
A:
The
program
has
ended
but
the
USB
modem
power
is
turned
off.
automatically is when USB cable is connected to the PC/Notebook. In order to turn off the modem,
press ON/OFF button for at least 5 seconds.
Q:
A:
tried
to
turn-on
the
modem
by
pressing
ON/OFF
button
but
unsuccessful.
the USB cable. If the power is still not on, please contact A/S center for further information.
Q: Easy Wireless Net program displays "DB xxxx Error" message and
A:
terminates.
when using Windows XP, Windows 2000 OS in a computer. However, this type of database file has
been removed by some other program.
AnyTime AnyPlace AnyWireless Data Solutions™
64/
AnyDATA.NET USB Modem (User Manual)
Need to update following two (2) files from Microsoft site:
1. MDAC : 
2. Jet Engine 4.0:

AnyTime AnyPlace AnyWireless Data Solutions™
65/
AnyDATA.NET USB Modem (User Manual)
6. Quick Guide
6.1
Display
Display
Indicators
Function
RSSI Signal Strength Indicator
New message arrived.
Voice Mail arrived.
Voice Mail and New Message arrived.
Supports Hybrid mode
Only 1X mode available
Only EVDO mode available
USB connected
Roaming
Connected to the Modem
Either the cable is disconnected to the modem or improper port connection.
Internet connected
Internet disconnected
Connected to the Internet button.
Disconnecting to the Internet
Setup Easy Wireless Net
SMS menu
Phonebook Menu
Sending message.
Make a call
Call will be disconnected.
Displayed number will be erased.
AnyTime AnyPlace AnyWireless Data Solutions™
66/
AnyDATA.NET USB Modem (User Manual)
7. Macintosh
7.1
Changing
Preference
OS
from
Windows
system
to
MAC
Windows PC. In order to use ADU-310 on MAC, Preference OS should be converted to Macintosh
from Windows Systems as described below,
1. Preference OS of ADU-310 needs to be changed to MAC on Windows PC.
2. MAC Utility ("MED.exe") should be downloaded from provided CD
3. Plug ADU-310 and Install driver on Widows PC, see the details in the user's manual.
4. Run "MED.exe." (\\Utils\\MED.exe.)
5. Once "MAKE STROAGE SUCCESS!" massage is displayed, OS Preference has been changed to
operate ADU-310 on MAC.
6. Installing driver for MAC OS can be referred on separate MAC user's manual
7.2 Supported Macintosh Versions
1.
Macintosh
OS
version
10.4
(Tiger)
Tiger version driver is located in a folder [\\Mac Driver\\MAC10.4] from provided CD
2. Macintosh OS version 10.5 (Leopard)
Leopard version driver is located in a folder [\\Mac Driver\\MAC10.5] from provided CD
3. MAC User's Manual
Located in [CD-ROM:\\Mac Driver]
AnyTime AnyPlace AnyWireless Data Solutions™
67/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:04:13 16:42:28-07:00
Create Date                     : 2009:04:09 16:33:23-07:00
Metadata Date                   : 2009:04:13 16:42:28-07:00
Format                          : application/pdf
Title                           : Untitled1
Creator                         : UKL inc
Document ID                     : uuid:5bee0423-b68c-42f3-8087-6b6d1ea1cac2
Instance ID                     : uuid:8ff8ec8c-911c-4fcb-b374-0e11e3760da3
Page Count                      : 67
Author                          : UKL inc

EXIF Metadata provided by EXIF.tools