AnyDATA Korea APE-540C CDMA 1x/EVDO Wireless Data Modem User Manual APE 540C Manual

AnyDATA Korea Inc. CDMA 1x/EVDO Wireless Data Modem APE 540C Manual

User Manual

APE-540C (User Manual) SW-APE-540C-UG-V0.3EMarch 10, 2009
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 2/40 AnyDATA CDMA Module Series Reference Design Specification Copyright © 2009 AnyDATA Corporation. All Rights Reserved. Any part of this document may not be distributed, communicated, reproduced or transmitted in any form or by any means, electronic or mechanical or otherwise, for any purpose, without the permission of AnyDATA Corporation. This document can be subjected to revision without further notice. RF Exposure Warning: The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. In order to avoid the possibility of exceeding the FCC radio frequency exposure limit, human proximity to the antenna should not be less than 20cm. § 15.21 Information to user. No changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Contact Address AnyDATA.NET, Inc.(Korea) DaeGo Bldg, 1591-10 Kwanyang-dong, dongan-gu, Anyang City, Kyunggi-do Korea. http://www.anydata.co.kr E-mail: infodata@anydata.net Rep:+82-31-380-7100 Fax:+82-31-476-6021
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 3/40 Contents AnyDATA.NET CDMA Systems.................................................................................................................. 4 User Instruction.......................................................................................................................................... 5 Illustrate Instructions .................................................................................................................................. 6 LED............................................................................................................................................................ 7 Connecting Express Card to PC ................................................................................................................ 8 ■ Inserting/Removing Express Card ....................................................................................................... 8 System Requirements.............................................................................................................................. 11 ■ Check the operating condition ............................................................................................................11 Easy Wireless Net Installation and Uninstallation (In Windows 2000) ...................................................... 12 Easy Wireless Net Installation and Uninstallation (In Windows XP) ......................................................... 14 ■ Installing Easy Wireless Net and Driver............................................................................................. 14 ■ Uninstalling Easy Wireless Net and Driver ........................................................................................ 18 Easy Wireless Net Installation and Uninstallation (In Windows Vista) ...................................................... 20 ■ Installing Easy Wireless Net and Driver............................................................................................. 20 ■ Uninstalling Easy Wireless Net and Driver ........................................................................................ 24 Using Easy Wireless Net.......................................................................................................................... 26 ■ Main application interface.................................................................................................................. 26 ■ Connecting / Disconnecting the Internet ............................................................................................ 28 ■ Sending and Receiving SMS ............................................................................................................. 29 ■ Writing New Message .................................................................................................................... 30 ■ Viewing sent message ................................................................................................................... 32 ■ Viewing received or saved message..............................................................................................33 ■ Phonebook ........................................................................................................................................ 34 ■ Setting Environment .......................................................................................................................... 35 ■ [ About ] ......................................................................................................................................... 35 ■ [ Basic ].......................................................................................................................................... 36 ■ [ RUIM Card ]................................................................................................................................. 37 ■ [ Advance]...................................................................................................................................... 38 ■ [ User ] ........................................................................................................................................... 39 CDMA Q&A .............................................................................................................................................. 40
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 4/40 AnyDATA.NET CDMA Systems Thank You for Purchasing the "Express Card". APE-540C is slim-line Express Card with Plug & Play solution offering the most user-friendly wireless Express Card available on 3G network. With AnyDATA’s proven performance and reliability in EVDO (Rev. A) technology, it ensures high-speed data connection at 1.8Mbps uplink and 3.1Mbps downlink APE-540C is the next generation of wireless data card designed by AnyDATA to be compatible with CDMA 850MHz networks supporting the higher data rates of up to 3.1Mbps using EVDO (Rev. A) technology.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 5/40 User Instruction ■ Packet data communication fees Contrary to the voice communication fees, you may pay the fees by actual data usage. Please ask the service provider or A/S center for more detail. <Note> - Please be careful that data service rates may become high when performing communication with large amount of data such as browsing the homepage and downloading data. - Please check carefully, the data service rates for the International Roaming Data differ from domestic data service rates. ■ User authentication as Network Access You may be required to enter User ID and Password to access the Internet. In this case, ask the service provider or A/S center if you don’t know the ID and password.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 6/40 Illustrate Instructions Upper bottom LED Connector Antenna RUIM
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 7/40 LED LED Action Power IDLE BUSY
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 8/40 Connecting Express Card to PC ■ Inserting/Removing Express Card When you install the Express Card to PC for the first time, you need to have the driver installed first. <Note> - Check if the PC has the Express Slot. - The Express Slot may be located differently from PC to PC. ■ Inserting Method 1. Turn on the PC. 2. Insert the Express Card to the Express Slot of PC with LED facing down.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 9/40 ■ Method 1: Removing the Express Card by pushing the button as indicated 1. Check the Express Card is disconnected. <Note> - Exit the Express Card utility if it is in use. - 2. Push the Express Card softly as indicated, then it will be ready to remove easily. 3. Hold the sides of the Antenna and pull it out.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 10/40 ■ Method 2: Removing Express Card by pushing it to the direction as indicated 1. Check the Express Card is disconnected. <Note> - Exit the Express Card utility if it is in use. 2. Push the Express Card softly as indicated, then it will be ready to remove easily. 3. Hold the sides of the Antenna and pull it out.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 11/40 System Requirements ■ Check the operating condition Install and operate the program under the following operational environments: Item Requirement Laptop Laptop with Express Card / 34 slot compatible OS Windows 2000 (SP4) Windows XP (SP3) Windows VISTA (SP1) Memory 128Mb or more Hard disk 50Mb or more available space Display 800 x 600 dots or more recommended
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 12/40 Easy Wireless Net Installation and Uninstallation (In Windows 2000) <Note> - Express Card doesn’t support Plug & Play in Windows 2000 and installation should be executed manually as described below. Follow the steps to use Express Card for Windows 2000. 1. Install the Express Card to PC and verity if it is recognized properly as CD-ROM. 2. Open “My Computer”. 3. Click “AnyDATA” CD-ROM. 1) Double-click the “AnyDATA (H:)” or right-click and select “Open”.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 13/40 4. Double-click the “StartCD.Exe” <Note> - Follow the step as indicated page 14, “Installing Easy Wireless Net and Driver” and page 18, “Uninstalling Easy Wireless Net and Driver”.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 14/40 Easy Wireless Net Installation and Uninstallation (In Windows XP) ■ Installing Easy Wireless Net and Driver 1. Connect the modem to your PC with Express Card. If the driver has not been installed in your PC yet, Modem package installer will install the driver automatically. Otherwise if it still has not been installed, put the install CD in CD-ROM and run StartCD.exe manually. 2. Select the desire language as shown below. Press button to proceed. By pressing button, the installation of Easy Wireless Net Program will stop. 3. You can install Easy Wireless Net Program and modem driver by choosing the installing option.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 15/40 4. Next window displays asking proper path for installing the program. Default path is <C:\Program Files\Easy Wireless Net>
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 16/40 5. Press button for ending the program installation. 6. The computer needs to restart after the driver installation completed. To restart the computer later, select “I want to manually reboot later”. <Note> - It is recommended to select “Reboot now”. The device may not function properly if you select “I want to manually reboot later”
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 17/40 <Note> - Connect the modem and PC`s Modem Slot, and check if the driver is installed properly in <Device Manager>. See the followings to the location of <Device Manager> [Start ▶ Control Panel ▶ System ▶ Hardware Tab ▶ Device Manager] As shown in below with red boxed that shows <AnyDATA CDMA Express Card> and <AnyDATA CDMA USB Serial 1/2 Device>, the driver has been successfully installed.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 18/40 ■ Uninstalling Easy Wireless Net and Driver 1. [Start ▶ Programs ▶ Easy Wireless Net ▶ Uninstall] 2. By pressing Uninstall button, EWN program will be uninstalled.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 19/40 3. Click “Yes” to remove the modem driver. 4. Click “Yes”. Following screen will appear twice. 5. The computer must restart after the driver is uninstalled.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 20/40 Easy Wireless Net Installation and Uninstallation (In Windows Vista) ■ Installing Easy Wireless Net and Driver 1. Connect the modem to your PC with using Express Card. If the driver has not been installed in your PC yet, Modem package installer will install the driver automatically. Otherwise if it still has not been installed, put the install CD in CD-ROM and run StartCD.exe manually. 2. Press button to proceed. By pressing button, the installation of Easy Wireless Net Program will stop. 3. You can install Easy Wireless Net Program and modem driver by choosing the installing option.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 21/40 4. Next window displays asking proper path for installing the program. Default path is <C:\Program Files\EasyWirelessNet>
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 22/40 5. Press button for ending the program installation. 6. The computer needs to restart after the driver installation completed. To restart the computer later, select “I want to manually reboot later”. <Note> - It is recommended to select “Reboot now”. The device may not function properly if you select “I want to manually reboot later”
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 23/40 <Note> - Connect the modem and PC`s Modem Slot, and check if the driver is installed properly in <Device Manager>. See the followings to the location of <Device Manager> [Start ▶ Control Panel ▶ System and Maintenance ▶ Device Manager] As shown in below with red boxed that shows <AnyDATA CDMA USB Modem> and <AnyDATA CDMA USB Serial 1/2 Device>, the driver has been successfully installed.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 24/40 ■ Uninstalling Easy Wireless Net and Driver 1. [Start ▶ Programs ▶ Easy Wireless Net ▶ Uninstall] 2. By pressing Uninstall button, EWN program will be uninstalled.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 25/40 3. Click “Yes” to remove the modem driver. 4. Click “Yes”. Following screen will appear twice. 5. The computer must restart after the driver is uninstalled.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 26/40 Using Easy Wireless Net ■ Main application interface Once you insert the modem to PC, double-click the shortcut icon on desktop, then you will see the Easy Wireless Net as shown.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 27/40 A: Modem status window Display Function RSSI Signal Strength Indicator New message arrived. Supports Hybrid mode Only 1X mode available Only EVDO mode available USB connected Roaming Connected to the Modem Either the cable is disconnected to the modem or improper port connection. Internet connected Internet disconnected Connected to the Internet button. Disconnecting to the Internet SMS menu Phonebook Menu Setup Easy Wireless Net B: Information window • Displays the current status or operating instruction or etc.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 28/40 ■ Connecting / Disconnecting the Internet ■ Connecting the wireless internet connection. 1. Click 2. And then, you are ready to connect to internet. ( will appear at that time.) <Note> - While connect to the internet, information window displays connection time and volume of downloaded packet transmission ■ Disconnecting wireless internet connection 1. Click <Note> - While internet is activated, the various setup menu( ) is deactivated.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 29/40 ■ Sending and Receiving SMS Press button. As seen in above, there will be three buttons. (Write Message, OutBox, and InBox from the left). Pressing each button will transfer to appropriate screen.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 30/40 ■ Writing New Message 1) By pressing “Write Message” icon, the new window will appear for inserting the message. 2) Write the message in the window then press button to move to the next step. Note: By pressing special characters that is highlighted, that character will be written on the message window. 3) Input a phone number/numbers for sending SMS. It is possible to add upto 5 numbers. By pressing a Phonebook, a separate window will appear to select phone numbers. 4) After inserting phone numbers, press button to move to the next step.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 31/40 5) After selecting the number, press button to send the message. 6) After sending a message, the following window will appear. Sending Message has failed.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 32/40 ■ Viewing sent message 1) By pressing “Outbox” icon, you will see a screen as below. 2) All sent messages will be shown. 3) Select the message then press button to delete this message. 4) Select the message then press button to display all the contents in the window. 5) By pressing button, the selected message will be ready to send to a new number. Message read Unread message Sent message Note: Description of icons.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 33/40 ■ Viewing received or saved message 1) By pressing “InBox” icon, you will see a screen as below. 2) All received messages will be shown. 3) It will indicate whether the message was read or not. 4) Select the message then press button to delete this message. 5) Select the message then press button to view the whole contents in the display. By pressing button, the selected message will be ready to send to a new number. Message read Unread message Sent message Note: Description of icons.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 34/40 ■ Phonebook This is a feature to store phone numbers that uses to make calls accordingly. By pressing Phonebook button, following window will appear. [1/100] Maximum number of Phone numbers can be stored and currently saved phone numbers. Start searching. All: Find and display any characters that matches from the Phone Number into a Phone Number List Index: Finds a phone number based on the index. Name: Finds all names that contain any one of the letter to be searched. Phone: Finds all numbers that contains any one of the number to be searched. Sends SMS message to the selected phone number. Deletes selected number. Saves Phone Number into the recorded Index number. If the same Index number already exists then requires editing of the contents.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 35/40 ■ Setting Environment There are 5 options and please refer to below for explanations. ■ [ About ] Display the software version for EV-DO modem S/W and Easy Wireless Net program.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 36/40 ■ [ Basic ] The basic configuration for connect to the network using EV-DO modem. All values are set automatically, however if wants to change the value then check appropriate box/boxes in the left and press button to take effect. UserName : [None] Password : [None] ServiceNum : Internet Connect Dial Number
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 37/40 ■ [ RUIM Card ] When changing information of the RUIM Card. When changing information, must know PIN information. Three times are incorrect and when, it does not use.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 38/40 ■ [ Advance] This part is to change the important parameter for EV-DO modem. If wants to change the value then check appropriate box/boxes in the left and press button to take effect. Pref Mode: Place to select a mode from 1x, EVDO and 1xEVDO. <Note> Basically the modem supports all modes if the network supports them. However, if RUIM Card is not supported and any one of the mode is not supported by the network, then it is not possible to get connected in selected mode.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 39/40 ■ [ User ] If wants to change the value then check appropriate box/boxes in the left and press button to take effect. Always On Top: The program window will be always top if “ON” is selected.
Manual for APE-540C AnyTime AnyPlace AnyWireless Data Solutions™ 40/40 CDMA Q&A • The modem is not recognized. Symptom Check Check if the AnyDATA modem and port is worked properly after select with that order ; START→ setting → control panel → Hardware tap → device manager Make sure to insert modem all the way to the end of Modem slot Modem recognition is unadvisable. Check if the Driver for modem is working function properly. • Driver communicating Symptom Check Communication is unadvisable. Check that signals are received in the service area. • Other Trouble Symptom Check Check if the modem is inserted properly to Modem slot Stop working suddenly. If you install the other software or devices, it may make the PC condition changed. Please install the driver again and check it. The modem is not detected on the Hardware if it is inserted into Modem slot. Refer to the working condition of the PC. - When you use the Windows 2000, you have to run Launcher.exe by manual - When you use the MAC, refer to Mac Manual supplied separately.

Navigation menu