AnyDATA DTL718-W HSPA+ Module User Manual RHZDTL718 W Rev1
AnyDATA (Shanghai) Co., Ltd HSPA+ Module RHZDTL718 W Rev1
AnyDATA >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1886712 |
| Application ID | aR5VyuwSJyrE1mS2RpTbHw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155.65kB (1945589 bits) |
| Date Submitted | 2013-01-25 00:00:00 |
| Date Available | 2013-01-25 00:00:00 |
| Creation Date | 2013-01-17 14:49:17 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2013-01-17 14:49:17 |
| Document Title | Microsoft Word - RHZDTL718-W_User Manual Rev1 |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
AnyDATA DTL718-W(-P) Module AT Command Reference M2M-AT014-03 2012.11.20 Send Technical Questions to: support_sh@anydata.com AnyDATA (Shanghai) 489 SongTao Road, Sector B, 1st FL. Pudong ZhangJiang Hi-Tech Park, Shanghai, 201203 Tel: +86(021) 5080-4828 Fax: +86(021) 5080-3828 AnyDATA Corporation 5 Oldfield Irvine, California 92618 USA http://www.anydata.com Copyright © AnyDATA Co., Ltd. 2011. All rights reserved. All data and information contained in or disclosed by this document are confidential and proprietary information of AnyDATA Corporation, and all rights therein are expressly reserved. By accepting this material, the recipient agrees that this material and the information contained therein are held in confidence and in trust and will not be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of AnyDATA Corporation. Restricted Distribution. This document contains critical information about AnyDATA Corporation products and may not be distributed to anyone without permission of AnyDATA Corporation. All data and information contained in this document are proprietary and confidential information of AnyDATA Corporation. No part of this document may be reproduced, in any form or any means without written permission of AnyDATA Corporation. Notice Although the information in this document has been carefully reviewed and its believed to be reliable. AnyDATA Corporation does not assume any liability arising out of the application or use of any product described herein, Neither does it convey any license under its patent rights nor rights of others. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. If the FCC ID of the module cannot be seen when it is installed, then the host label AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference must include th he text: Co ontains FCC C ID: RHZD DTL718-W Maximum cond ducted outtput powerr (measured) and the maximum m permitted d antenna gain is as below w: Band P ( Maximum m conducte ed output power (dBm)) Antenna a Gain (dB Bi) UM MTS Band II 23.35 4.5 UM MTS Band V 23.32 4.5 The antenna ca annot be in nstalled to be used within 20cm m of any persons and must not be co-located within 20cm of otherr transmitte er antenna as. Do ocument History Verssion 00 01 02 03 Date 2012-5-25 Description Initial Version A +CLVL Add L\+CMUT commandss 2012-8-2 Delete set command of +WS46 A +CNM Add MP command 2012-8-28 Add A +CMU UT comman nd Modify ATS S7 default value 2012 2-11-20 Add A +ACELLINFO co ommand AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Con ntents Overview ................ .......................................................................................... 4 1.1 Scope of Document ..................................................................................................... 4 1.2 mative Refere ences ................................................................................................. 4 Norm 1.3 Abbre eviations ............................................................................................................... 4 1.4 Defin nitions .................................................................................................................... 5 Basic Comm mands ................................................................................................ 7 2.1 A/, Repeating A Command L .................................................................................. 7 Line 2.2 ATE, Command Echo .................................................................................................. 7 2.3 MI, Requestt Manufacturrer Identifica ation .............................................................. 8 +CGM 2.4 +CGM MR, Requesst Revision Identification n .................................................................... 8 2.5 +CGS SN, Requesst Serial Num mber Identification ........................................................... 8 2.6 +CSC CS, Select TE T Characte er Set ............................................................................... 8 2.7 +CIM MI , Request Internationa al Mobile Su ubscriber Ide entity (IMSI) ................................ 9 2.8 +GCA AP, Capabiliities List .............................................................................................. 9 2.9 +CME EE, Report Mobile Equipment Errorr .................................................................. 10 C Contro Call ol Commands.................................................................................... 11 3.1 ATA, Answer............................................................................................................... 11 3.2 ATD, Dial .................................................................................................................... 11 3.3 ATH, Disconnectt ........................................................................................................ 12 3.4 0, Enables/disables Auto omatic Answ wering .......................................................... 12 ATS0 3.5 +CST TA, Selects Type of Address .............................................................................. 13 3.6 +CHU UP, Hangup Call ................................................................................................. 13 3.7 +CRL LP, Radio Link Protocol................... ................................................................... 14 3.8 +CEE ER, Extende ed Error Rep port ................................................................................ 15 3.9 +CRC C, Cellular Result Codes ................................................................................... 15 3.10 +CVH HU, Voice Hangup Conttrol ................................................................................. 16 3.11 +CMU UT, Microph hone Mute Control ............................................................................ 17 3.12 +VTS S, DTMF And d Tone Generation .......................................................................... 18 3.13 +CLC CC, List Currrent Calls.......................................................................................... 18 3.14 ATS, S Paramete ers .................................................................................................... 20 WA, Call Wa aiting ................................................................................................. 20 3.15 +CCW 3.16 +CHL LD, Call Related Supple ementary Se ervices ......................................................... 22 3.17 +CCF FC, Call Forrwarding Number and Conditions .................................................... 23 Network Service Com mmands ............................................................................ 25 4.1 +CNU UM, Subscriiber Numberr .................................................................................... 25 4.2 +CRE EG, Networkk Registratio on Report ...................................................................... 25 M2M-AT014-03 AnyDA ATA © 2001-2011 Pag ge 1 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference 4.3 +CGR REG, GPRS S Network Registration Status ......................................................... 26 4.4 +COP PS, Operato or Selection ................... ................................................................... 27 4.5 +CPO OL, Preferre ed Operator List ............................................................................... 29 4.6 +CPL LS, Selection of Preferre ed PLMN Lis st ................................................................ 30 4.7 +COP PN, Read Operator Nam mes ............................................................................... 31 4.8 +CNM MP, Preferre ed Mode Selletion ............................................................................. 31 4.9 +CLC CK, Facility Lock/Unlock k..................................................................................... 32 4.10 +CPW WD, Change e Facility Pa assword ......................................................................... 33 4.11 +CLIP P, Calling Line Identifica ation Presen ntation ......................................................... 34 4.12 +CLIR R, Calling Liine Identifica ation Restric ction ............................................................ 35 4.13 +COL LP, Connectted Line Iden ntification Presentation ................................................. 36 4.14 +FCL LASS, Selecct Mode ............................................................................................. 37 4.15 +CBS ST, Select Bearer Servicce Type ......................................................................... 38 4.16 +CCU UG, Closed User Group p..................................................................................... 39 4.17 +ACE ELLINFO, Cell C Informatiion Requestt .................................................................. 40 M Contro ME ol & Status Command ds ....................................................................... 41 5.1 +CPA AS, Phone Activity Statu us ................................................................................... 41 5.2 +CFU UN, Set Pho one Function nality .............................................................................. 42 5.3 +CPIN, Enter PIN N....................................................................................................... 43 5.4 Q, Signal Qu uality ................................................................................................. 44 +CSQ 5.5 +CCL LK, Clock ............................................................................................................ 44 5.6 +CSIM, Generic SIM accesss ..................................................................................... 45 5.7 AC, List all available AT commands ................................................................... 45 +CLA 5.8 +CTZ ZU, Automattic Time Zon ne Update ...................................................................... 46 5.9 +CTZ ZR, Time Zo one Reportin ng ................................................................................... 46 5.10 +IFC, MT-TE Loccal Flow Con ntrol ............................................................................... 47 VL, Loudspeaker Volume e Level .......................................................................... 48 5.11 +CLV 5.12 +CMU UT, Microph hone Mute Control ............................................................................ 49 5.13 &D, Set S DTE Rea ady (DTR) Line Mode...................................................................... 49 5.14 &C, Set S Carrier Detection (D DCD) Line Mode ............................................................. 50 5.15 +IPR, Fixed DTE E Rate ............................................................................................... 50 S to Factorry Defined Configuration n .................................................................. 51 5.16 &F, Set 5.17 &W, Store User Settings ............................................................................................ 51 5.18 +WS4 46, Select Wireless Nettwork ............................................................................. 51 SMS Comm mands ............................................................................................... 52 6.1 +CPM MS, Preferre ed Message Storage ....................................................................... 52 6.2 +CMG GF, Messag ge Format .......................................................................................... 53 6.3 +CMG GL, List Messsages.............................................................................................. 54 6.4 +CMG GD, Delete Message .......................................................................................... 56 M2M-AT014 4-03 AnyDAT TA © 2001-2 2011 Pag ge 2 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference 6.5 +CMG GR, Read Message ............................................................................................ 57 6.6 +CMG GS, Send Message ............................................................................................ 59 6.7 +CMG GW, Write Message To Memory ........................................................................ 61 6.8 +CMS SS, Send Message from m Storage ...................................................................... 62 6.9 +CNM MI, New Message Indica ations To TE E .................................................................. 63 6.10 +CNM MA, New Me essage Ackn nowledgeme ent............................................................... 65 6.11 +CMT T, New Message Indication ............................................................................... 66 6.12 +CMT TI, Memory Location Ind dication ......................................................................... 67 6.13 +CSD DH, Show Te ext Mode Pa arameters ...................................................................... 68 6.14 +CSC CA, Service Centre Address .............................................................................. 69 6.15 +CSC CB, Select Cell C Broadca ast Message e Types ........................................................ 69 6.16 +CSM MP, Set Textt Mode Para ameters.......................................................................... 71 6.17 +CSM MS, Select Message Se ervice ............................................................................. 71 6.18 +CMM MS, More Messages to Send ............................................................................ 72 6.19 +CGS SMS, Selectt service for MO SMS messages .................................................... 73 Phonebook k Comman nds .................................................................................... 74 7.1 +CPB BS, Select Phonebook Memory Storage............................................................ 74 7.2 +CPB BR, Read Ph honebook Entries ............................................................................ 75 7.3 +CPB BW, Write Phonebook Entry .............................................................................. 76 7.4 +CPB BF, Find Pho onebook Entry ................................................................................. 77 GPRS Com mmands ............................................................................................. 78 8.1 +CGA ATT, PS Atta ach or Detacch .................................................................................. 78 8.2 +CGD DCONT, Deffine PDP Co ontext ............................................................................ 79 8.3 +CGA ACT, PDP Context Activvate or Deac ctivate ......................................................... 80 8.4 +CGD DATA, Enterr Data State e ..................................................................................... 81 8.5 +CGP PADDR, Sho ow PDP add dress ............................................................................. 82 M2M-AT014 4-03 AnyDAT TA © 2001-2 2011 Pag ge 3 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference 1.1 Overv view Scope off Documeent This document describes all AT co ommands implemen nted on An nyDATA DT TL718-W mod dule, for internal or manufacture er use. As th he firmwarre of DTL71 18-W-P an nd DTL718-W module e are the sa ame, the document can also be ap pplied to DT TL718-W-P P module. 1.2 Normativ ve Refereences The following documentts contain provisions s which, th hrough refe erence in this text, consstitute provvisions of th he presentt document. [1] ETSI GSM 07.07 [2] ETSI GSM 07.07 [3] TIA-EIA-IST -707-A.3 [4] IT TU-T Reco ommendatiion V.25 te er [14] 1.3 Abbrevia tions Abbrev viations 3GPP BER CDMA CLIP DCE DCS DTE GPRS GSM IMEI ITU-T IWF MT PDP PIN PLMN PUK RPLMN M2M-AT014 4-03 Full Spellin ng Third Gene eration Parrtnership Project B Error Ra Bit ate Code Division Multiple Access C Line Id Call dentifier pre esentation Data Circuiit Equipme ent Data coding scheme Data Termiinal Equipm ment General Pa acket Radio o Service Global System for Mo obile Comm munication ns Internationa al Mobile Equipment t Identity Internationa al Telecom mmunicatio on UnionT Telecommu unication Standardiza ation Secto or Interworkin ng Function Mobile Term minal Packet Datta Protocoll Personal Id dentity Num mber Public land d mobile ne etwork P Unbloccking Key PIN Registered PLMN AnyDAT TA © 2001-2 2011 Pag ge 4 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Abbrev viations RSSI SCA SIM SM TE UIM URC USIM WCDM MA Full Spellin ng Receive sig gnal streng gth indicato or Service Ce enter Addre ess GSM Subscriber Iden ntity Modulle Short messsage Terminal Equipment User Identity Module Unsolicited d result cod de Universal Subscriber Identity Module Wideband CDMA 1.4 Definition ns The following syntactical definitionss apply:Carriage return character, is the com mmand line and result code te erminator charracter, whiich value, in decima al ASCII between 0 and 255,is specifie ed within para ameter S3. The defau ult value is 13. > Linefee ed charactter, is the character recognize ed as line feed charracter. Its value, in decim mal ASCII between 0 and 255, is specified within parameterr S4. The defa ault value iss 10. The line feed ch haracter is s output aftter carriage e return ch haracter if verb bose result codes are e used (V1 option us sed ) otherrwise, if nu umeric form mat result code es are used d (V0 optio on used) it will not ap ppear in the e result codes. <...> Name enclosed in angle brackets is i a synta actical elem ment. They y do not appe ear in the command line. [...] Option nal subpara ameter of a comman nd or an op ptional parrt of TA infformation resp ponse is en nclosed in square bra ackets. Bra ackets them mselves do not appe ear in the command line e. When su ubparametter is not given in AT A comma ands which h have a Read d comman nd, new va alue equalss to its prev vious value e. In AT co ommands which do not store the values off any of their subparameterss, and so have not a Read command, which are ca alled action n type com mmands, action shou uld be don ne on the basiss of the reccommende ed default setting of the t subparrameter. As 3GPP TS 17.007 desscribes, there is a TA A part betw ween TE a and MT. And A in the TIA/EIA IS 707 7-A’s descrription, TA part is ignored. In orrder to desscribe unifo ormly, PC or AP is consid dered as TE; T TA partt is merged d into MT. The following is a figure of o Data exxchange strructure: M2M-AT014 4-03 AnyDAT TA © 2001-2 2011 Pag ge 5 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference AT command is transmiitted as da ata packetts through the comm munication ports. In addition to thesse two cha aracters “A AT”, data pa ackets can n receive up p to 260 ch haracters in le ength (inclu uding the final null character)). The maxximum leng gth of the URC or resp ponse messsages repo orted by MT M is limited d to 668 ch haracters rrange. Each h comman nd line ca an contain one AT command.. For the URC or response messages, it is not allow wed to rep port more than one message iin a line. Each line endss with a ca arriage retturn. S3/S4 4 comman nd modifica ation is un navailable to users. Thesse principle es are app plied in the communic cations bettween MT and TE. To increase th he readability and normativity of the co ommand, th here should be no spacce after a comma a or colon in a new defin ned interfa ace, for example: AT+X XXX: , . Whe en an AT command d is transmitted from TE, the e second command d will be transsmitted aftter a respo onse of the e first com mmand from m MT, oth herwise the e second one will not be e executed.. It may take a long time to feedb back the results of the AT ccommand, and the resp ponses ma ay be broken by URC C. To avo oid this inte erface, it iss recomme ended to repo ort the resu ult codes asynchrono ously. Therre are two kinds of interface. On ne is that an URC is re eported wh hen waiting for a re esponse. The comm mand is sttill in the implementation n process and the result code es will be reported a after the URC. The othe er is that the respon nse will be e reported d mixing up with the e URC. Th he RING command is a special URC. For so ome special cases, it will be ussed as a command term minator. Fo or example e, when it is in the implementation proccess of a hang-up command, the RING URC will term minate the hang-up prrocess abn normally. Unle ess otherw wise specified, all the default en ncoding forrmat betwe een TE and d MT are GSM M 7 bit Defa ault Alphab bet, accord ding to 3GPP TS 23.038 Sectio on 6. Characters @ is stiill transmittted in 7bit encoding as 0x00. MT M and TE should be e able to ha andle the charracter. MT transmits the t carriag ge return ch haracter (< ) and line feed character M2M-AT014 4-03 AnyDAT TA © 2001-2 2011 Pag ge 6 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference ( ) in the string as a space. The definition of the strin ng: stream of bytes up u by the double quo otes, withou ut quotes ommas. or co A grroup of qu uote and comma ch haracter sh hould not appear in strings, otherwise strings cannot be distingu uished from m the parameters. Fo or UCS2 en ncoded da ata format, alue is reported as th he characte er encoding g format, such as tha at a charac cter of the its va UCS S2 coded 0x553a is reported ass 553a. Baasic Co omma ands 2.1 A/, A Repeeating A Comman nd Line Description If the e prefix "A//" or "a/" is received, the module shall imm mediately e execute on nce again the body of the e preceding g comman nd line. Synttax Execcution com mmand A/ Exam mple AT+CSQ SQ: 99,0 +CS OK A/ +CS SQ: 99,0 2.2 ATE, Com mmand Echo Description Set command enables/disables the e command d echo. Synttax Set command Resp ponse ATE[ ] OK Para ameter 0 - disa ables comm mand echo M2M-AT014 4-03 AnyDAT TA © 2001-2 2011 Pag ge 7 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference 1 - ena ables command echo (factory default) , hence com mmand se ent to the device are echoe ed back to the DTE before the response iss given. Note: iff paramete er is omitte ed, the com mmand hass the same e behavior of ATE1. 2.3 +CGMI, Request Manufaccturer Ideentificatio on Description Execcution com mmand retu urns the de evice manu ufacturer id dentification code. Syn ntax Execcution com mmand Resp ponse AT+CGMI AnyDATA CO., LTD OK 2.4 +CGMR, Requestt Revision n Identifiication Description Execcution com mmand retu urns device e software revision number. Synttax Execcution com mmand Resp ponse AT+CGMR OK 2.5 +CGSN, Request Serial Number Id dentification Description Execcution com mmand retu urns the de evice ESN.. Synttax Execcution com mmand Resp ponse Para ameter AT+CGSN the de evice board d serial num mber , an octet in hexxadecimal format Exam mple AT+CGSN 42FB B40B5 OK 2.6 +CSCS, Select TE Characteer Set M2M-AT014 4-03 AnyDAT TA © 2001-2 2011 Pag ge 8 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Description Set command sets the cu urrent charracter set used by the device. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse AT+C CSCS= OK AT+C CSCS? +CSC CS: AT+C CSCS=? +CSC CS: (list off supported d ss) Para ameter cha aracter sett “IR RA” - ITU-T T.50 (defau ult) ”UC CS2” - 16-bit universsal multiple e-octet coded charactter set Exam mple AT+CSCS=? +CS SCS: ("IRA"","UCS2") OK AT+CSCS? +CS SCS:”IRA” OK 2.7 +CIMI , Request Internatiional Mo obile Sub bscriber Id dentity (IIMSI) Description Execcution com mmand retu urns the va alue of the Internal Mobile Subsscriber Iden ntity. Synttax Execcution com mmand Resp ponse AT+CIMI Para ameter the va alue of the Internal Mobile Subs scriber Identity, a string of decim mal digits Exam mple AT+CIMI 4600 016191604 4844 OK 2.8 +GCAP, Capabilitties List M2M-AT014 4-03 AnyDAT TA © 2001-2 2011 Pag ge 9 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Description Execcution com mmand re eturns the equipment supporrted comm mand set list. The command works only wh hen UIM ca ard exists. Synttax Execcution com mmand Resp ponse AT+GCAP +GCAP: Para ameter the equipment t supported d command set list. +CG GSM: GSM M supported +FC CLASS: Faxx comman nd set +ES S: Error con ntrol comm mand set +DS S: Data Serrvice comm mon modem comman nd set Exam mple AT+GCAP +GC CAP: +CGS SM,+ES ,+ +DS +FCLA ASS OK 2.9 +CMEE, Report Mobile Equipmen nt Error Description Set command enables/d disables the e report off result cod de: +CME ERROR: as an in ndication of o an errorr relating to t the com mmands isssued. Whe en enabled d, device relatted errors cause the +CME ERROR: final resu ult code instead of th he default ERR ROR final result code e. ERROR is anyway returned normally when the errror is not relatted to MT. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse AT+C CMEE= OK AT+C CMEE? +CMEE: AT+C CMEE=? +CMEE: (list off supported d s) Para ameter enable flag 0 - disab ble +CME ERROR: reportts, use onlyy ERROR report 1 - enab ble +CME ERROR: reports, with in nume eric formatt 2 - enab ble +CME ERROR: reports, with in verb bose format(default) M2M-AT014--03 AnyDATA A © 2001-2011 Page e 10 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Exam mple AT+C CMEE=0 OK AT+C CGSN ERR ROR AT+C CMEE=1 OK AT+C CGSN +CM ME ERROR R: 23 AT+C CMEE=2 OK AT+C CGSN +CM ME ERROR R: memory failure AT+C CMEE=? +CM MEE: (0, 1, 2) Calll Conttrol Co omma ands 3.1 ATA, Answer Description mmand is used to an nswer to an a incomin ng call if au utomatic answer is Execcution com disabled. Synttax Execcution com mmand Resp ponse ATA OK o ERROR or: 3.2 ATD, Diaal Description Execcution com mmand starrts a data call c to the phone num mber given as parameter. Synttax Execcution com mmand M2M-AT014--03 ATD ; ATD>mem ; AnyDATA A © 2001-2011 Page e 11 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference ATD> ; OK o ERROR or Resp ponse Para ameter phone number to be dialed, a string of 0 or more of the cha aracters: “0 1 2 3 4 5 6 7 8 9 * #” mem m initiate es a call fro om the currrently sele ected phone book, loc cation initiate es a call from the e currentlyy selected d phone book, the param meter desccribes the e text asssociated to the number in phone ebook Exam mple ATD D13800138 8000; OK ATD D>“John”; OK 3.3 ATH, Dissconnect Description Execcution com mmand is used to closse the currrent conversation. Synttax Execcution com mmand Resp ponse ATH OK o ERROR or: 3.4 ATS0, En nables/dissables Au utomatic Answerin ng Description Set command sets the nu umber of riings requirred before device auttomatically answers an in ncoming ca all. Synttax Set command Resp ponse Read d command Resp ponse ATS0 0= OK ATS0 0? Para ameter 0 auto answe er disabled d (factory default) M2M-AT014--03 AnyDATA A © 2001-2011 Page e 12 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference 1 to 255 num mber of rin ngs require ed before automatic answer Exam mple ATS S0=2 OK ATS S? 002 3.5 +CSTA, Selects Ty ype of Address Set command sets the tyype of addrress to dial. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse AT+CSTA= = OK AT+CSTA? +CSTA: AT+CSTA= =? +CSTA: (lisst of suppo orted s) Para ameter type of o address 129 - number in n national format 145 - number in n internatio onal formatt (contains the "+") mple Exam AT+CSTA=129 OK AT+CSTA=? +CS STA: (129, 145) 3.6 +CHUP, Hangup Call Description Execcution com mmand ha angs up all a active calls, givin ng an assured proc cedure to term minate an alternating mode call. Synttax Execcution com mmand Resp ponse M2M-AT014--03 AT+CHUP OK AnyDATA A © 2001-2011 Page e 13 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference 3.7 +CRLP, Radio Lin nk Protoccol Description Radio link prottocol (RLP) paramete ers used fo or non-tran nsparent da ata calls. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse AT+CRLP= = , , >, , OK AT+CRLP? +CRLP: , , , ,0 +CRLP: , , , ,1 +CRLP: , , , ,2 AT+CRLP= =? +CRLP: (lisst of suppo orted >, ,< , s s),0 +CRLP: (lisst of suppo orted >, ,< , s s),1 +CRLP: (lisst of suppo orted >, ,< , s s),2 Para ameter ve ersion For Version 0 and a 1, the following parameter values are e supporte ed: IW WF to MS window sizze, range frrom 0 to 61 M to IWF window MS sizze, range frrom 0 to 61 accknowledg gement timer , in 10m ms units, ra ange from 3 38 to 255 re etransmission attemp pts , range from 1 to 255 For Version 2, the following parame eter values s are supported: IW WF to MS window sizze, range frrom 0 to 48 88 M to IWF window MS sizze, range frrom 0 to 48 88 accknowledg gement timer , in 10m ms units, ra ange from 4 42 to 255 re etransmission attemp pts, range from 1 to 255 Exam mple AT+CRLP=61,,61,48,6,0 OK AT+CRLP=? +CR RLP: (0-61)),(0-61),(38 8-255),(1-2 255),0 +CR RLP: (0-61)),(0-61),(38 8-255),(1-2 255),1 +CR RLP: (0-488 8),(0-488),(42-255),(1-255),2 OK AT+CRLP? RLP: 61,61,48,6,0 +CR +CR RLP: 61,61,48,6,1 +CR RLP: 240,24 40,52,6,2 M2M-AT014--03 AnyDATA A © 2001-2011 Page e 14 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference OK 3.8 +CEER, Extended d Error Report Description Execcution com mmand retturns inforrmation tex xt, which offers the user an extended repo ort for the reason of the t failure of the last unsuccessful call se et up (originating or answ wering) or in-call mod dification. Synttax Execcution com mmand Resp ponse AT+CEER +CEER: Para ameter an extended report for - the e failure in the last un nsuccessfu ul call setup(originatin ng or answ wering) or in-ca all modifica ation; - the e last call release; - th he last un nsuccessfu ul GPRS attach or unsuccesssful PDP P context activvation; - the e last GPR RS detach or o PDP context deacctivation. Exam mple ATD D13800138 8000; OK NO CARRIER AT+CEER +CE EER：Userr busy OK 3.9 +CRC, Cellular Result Codes Description Set command controls th he use of extended fo ormat repo orting durin ng a MT ca all set up. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse M2M-AT014--03 AT+CRC=< OK AT+CRC? +CRC: AT+CRC=? +CRC: (listt of supporrted s) AnyDATA A © 2001-2011 Page e 15 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Unso olicited me essage +CRING: Para ameter 0 – diisables exttended form mat (i.e. RING) (de efault) 1 – en nables exte ended form mat (i.e. +C CRING: VO OICE) GPRS VOIC CE(normal voice) FAX(Facsimile) Exam mple AT+CRC=1 OK AT+CRC? +CR RC: 1 (a MT M call set up) +CR RING: VOIC CE +CR RING: VOIC CE AT+CRC=? +CR RC: (0, 1) 3.10 +CVHU, Voice Hangup Control Description Set command d selects whether ATH sha all cause a voice connection to be disco onnected or o not. By voice connection is also mean nt alternatiing mode calls that are currently in n voice mo ode. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse AT+CVHU= = OK AT+CVHU? +CVHU: AT+CVHU= =? +CVHU: (lisst of suppo orted s) Para ameter 0- ATH disco onnects, bu ut OK response given n. 1- ATH ignorred. Exam mple ATD D10010; OK M2M-AT014--03 AnyDATA A © 2001-2011 Page e 16 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference AT+CLCC +CLCC:1,0,0,0 0,0,”10010”,129 OK AT+CVHU=1 OK ATH OK AT+CLCC +CLCC: 1,0,0,0,0,”10010 0”,129 OK AT+CVHU=0 OK ATH OK AT+CLCC OK 3.11 +CMUT, Microph hone Mu ute Contrrol Description Set command enables/d disables th he muting of the miccrophone a audio line during a voice e call. Oncce the call is disconne ected, the muting is disabled. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse MUT= AT+CM OK AT+CM MUT? +CMU UT: AT+CM MUT=? +CMU UT: (list of supported s) Para ameter 0 - mutte off, micrrophone acctive 1 - mutte on, micrrophone muted (facto ory default)) Exam mple ATD D10010; OK AT+CMUT=0 OK AT+CMUT? +CM MUT: 0 M2M-AT014--03 AnyDATA A © 2001-2011 Page e 17 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference ATH OK AT+CMUT=1 ROR ERR AT+CMUT=? +CM MUT: (0-1) 3.12 +VTS, DT TMF And d Tone Generatio on Description allows the e transmisssion of DTM MF tones. Set command Synttax Set command Resp ponse Test command Resp ponse Para ameter AT+VTS=< OK AT＋VTS＝ ＝ +VTS: (list of supportted s) a single e ASCII cha aracter in the t set 0-9 9, #,*,A-D Exam mple ATD D10010; OK AT+V VTS=3 AT+V VTS＝? +VTS: (0-9, A--D, *, #) OK 3.13 +CLCC, List Curreent Calls Description Execcution com mmand retu urns the list of current calls and their charracteristics. Synttax Execcution messsage Resp ponse AT T+CLCC [+C CLCC: , , ,, , , [, ] [+C CLCC: , , ,, , , [, ][....] Note e: If no call is active then only OK O messag ge is sent. M2M-AT014--03 AnyDATA A © 2001-2011 Page e 18 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Para ameter all identifica ation numb ber ca ca all direction 0 - mobile orriginated call 1 - mobile te erminated call sta ate of the call 0 - active 1 - held 2 - dialing (M MO call) 3 - alerting (MO call) 4 - incoming g (MT call) 5 - waiting (M MT call) ca all type 0 - voice 1 - data 2 – fax 9 - unknown multiparty ca all flag 0 - call is nott one of multiparty (c conference) call partie es 1 - call is one of multip party (confe erence) call parties strring type phone number in form mat specifie ed by typ pe of phon ne number octet in intteger format 12 29 - nationa al numberiing scheme 14 45 - interna ational num mbering scheme (con ntains the ccharacter "+") strring type; alphanume eric repres sentation of correspo onding to the e entry found in pho onebook; used charracter set should be the one se elected with h +CSCS. Note e: The pressentation of o call waiting and calll held statu us is option nal. Becau use of the netw work, statuss of calls will w not be presented or presentted incorre ectly. Exam mple ATD D10010; OK ATD D12345678 8901; OK AT+CLCC +CLCC: 1,0,0,0,0,”10010 0”,129 +CLCC: 2,0,3,0,0,”12345 5678901”,1 129,”ABC” OK RING RING AT+CLCC +CLCC: 1,1,4,0,0,”18811 1811157”,1 129,”AAA” M2M-AT014--03 AnyDATA A © 2001-2011 Page e 19 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference 3.14 ATS, S Parameterrs Description Basiic comman nds that be egin with the letter “S” “ are known as “S S-Paramete ers”. The num mber followiing the “S” indicates the “param meter numb ber” being referenced d. Synttax Set command Resp ponse Read d command Resp ponse ATSn= OK ATSn? S Sn: Para ameter S0 set the number off rings req quired beffore device automattically ans swers an incoming call. =0 auto answer dissabled (fac ctory default) 1 to 255 number of o rings req quired befo ore automa atic answerr S3 set the value of th he charactter recogn nized by th he device as comm mand line terminato or, range is 0 to 127; factory deffault value is 013 (AS SCII CR) S4 set the va alue of the e character generate ed by the device as part of the e header, trailer, an nd terminattor for resu ult codes and a inform mation text, range is 0 to 127; factory de efault value e is 010 (A ASCII LF) S5 set the va alue of the e characterr recognize ed by the device as a request to delete from the command line the im mmediately preceding g characterr, range is 0 to 127; factory de efault value e is 008 (A ASCII BS). ause before blind dialing, range e is 2 to 10 0; factory default value is 002 S6 set the pa mpletion off call answ wering or orriginating S7 sets number of secconds to wait for com procedure e before giving up an nd disconnecting; ran nge is 0 to 255, factorry default value is 000 S8 specifies the amou unt of time e, in seco onds, that the TE sshall pause e, during signaling of call ad ddressing information to the network (d dialing), wh hen a "," (comma) dial modiffier is enco ountered in n a dial string. range is 1 to 255 5, factory default va alue is 002. Exam mple ATS S6=8 OK ATS S6? 008 3.15 +CCWA, Call Waaiting M2M-AT014--03 AnyDATA A © 2001-2011 Page e 20 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference Description Set command allows the e control off the call wa aiting supp plementaryy service. Synttax Set command Resp ponse Read d command Resp ponse Test command Resp ponse Unso olicited me essage AT+CCWA A= [, [, ]] when =0 or 1: OK when =2: +CCWA: , AT+CCWA A? +CCWA: AT+CCWA A=? +CCWA: (list of supported ss) +CCWA: , , Para ameter en nables/disa ables the presentatio n of an unsolicited re esult code 0 - disable(d default) 1 - enable wh hen the pa arameter iss not given,, network is not interrrogated 0 – disable call c waiting 1 - enable ca all waiting 2 - query sta atus ca all type, a sum of inte egers each representting a classs of information 1 - voice (tellephony) 2 - data 4 - fax (facsiimile servicces) 8 - short message servvice 16 6 - data circcuit sync 32 2 - data circcuit async 64 4 - dedicate ed packet access 12 28 - dedica ated PAD access strring type phone number of form mat specifie ed by typ pe of addre ess in integ ger formatt is a sum of integers ea ach repres senting a class of infformation which the co ommand re efers to 0 - not active 1 - active Exam mple AT+CCWA=0,1,1 OK ATD D10086; M2M-AT014--03 AnyDATA A © 2001-2011 Page e 21 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference OK AT+CCWA=1,2,1 +CC CWA: 1,1 OK +CC CWA: “1881 12345678””,129,1 AT+CLCC +CLCC: 1,0,0,0,0,“10086 6”,129,“CC CCC” +CLCC: 2,1,5,0,0,“18812 2345678”,1 129 AT+CCWA=? +CC CWA: (0-1) OK AT+CCWA +CC CWA: 0 OK 3.16 +CHLD, Call Relaated Supplementa ary Servicces Description Set command allows call control ussing Call Hold and MultiParty. Synttax Set command Resp ponse Test command Resp ponse AT+CHLD= = OK AT+CHLD= =? +CHLD: (lisst of suppo orted s) ameter Para 0 – release all held calls or sets Us ser Determ mined Userr Busy(UDUB) for a waitting call 1 – releases all a active calls (if any y exist) an nd acceptss the otherr (held or waitting) call 1x – releases a specific active call X 2 – places all active callss (if any ex xist) on hold and acce epts the otther (held or waiting) calll 2x – places all active calls on hold except call X with wh hich communication shalll be suppo orted. 3 – adds a held call to th he conversation 4 – connects the two calls and disconneccts the sub bscriber frrom both callss(ECT) Note e: 1. X is range from 1 to 7 2. This is bassed on the GSM supplementaryy services HOLD (Call Hold), MPTY (MultiParty) an nd ECT (Explicit Calll Transfer). The application of M2M-AT014--03 AnyDATA A © 2001-2011 Page e 22 of 82 AnyDATA DTL718-W W(-P) Module A Comm AT mand Refference tthe comma and depend ds on vario ous carrierrs, such as AT+CHLD D=3. 3. Set S AT+CHLD=1 firrst to release the active call, then the e current conversatio on can be closed by ATH. Exam mple ATD D10086; ATD D10010; AT+CLCC +CLCC: 1,0,1,0,0,”10086 6”,129,”CC CCC” +CLCC: 2,0,0,0,0,”10010 0”,129 OK AT+CHLD=3 OK AT+CLCC +CLCC: 1,0,0,0,1,”10086 6”,129,”CC CCC” +CLCC: 2,0,0,0,1,”10010 0”,129 OK AT+CHLD=22 OK AT+CLCC +CLCC: 1,0,1,0,0,”10086 6”,129,”CC CCC” +CLCC: 2,0,0,0,0,”10010 0”,129 AT+CHLD=? +CH HLD(0,1,1xx,2,2x,3,4) OK 3.17 +CCFC, Call Forw warding Number and Con nditions Description Set command d allows control ovver the ca all forward ding supp plementary y service provviding, regisstration, errasure, acttivation, de eactivation and statuss query. Synttax Set command Resp ponse Test command Resp ponse T+CCFC=< ,< [,< [,, [, [, >[, [,