Aoc E2051Sn Owner S Manual E2251Fw English 20110401

2014-07-05

: Aoc Aoc-E2051Sn-Owner-S-Manual aoc-e2051sn-owner-s-manual aoc pdf

Open the PDF directly: View PDF .
Page Count: 59

www.aoc.com

LCD Monitor User Manual

e2051Sn

Safety ........................................................................................................................................................................ 4

National Conventions ......................................................................................................................................... 4

Power ................................................................................................................................................................ 5

Installation .......................................................................................................................................................... 6

Cleaning ............................................................................................................................................................ 7

Other .................................................................................................................................................................. 8

Setup ........................................................................................................................................................................ 9

Contents in Box ................................................................................................................................................. 9

Setup Stand & Base ......................................................................................................................................... 10

Adjusting Viewing Angle ................................................................................................................................... 12

Connecting the Monitor .................................................................................................................................... 13

Adjusting ................................................................................................................................................................. 14

Setting Optimal Resolution .............................................................................................................................. 14

Windows Vista .......................................................................................................................................... 14

Windows XP ............................................................................................................................................. 16

Windows ME/2000 .................................................................................................................................... 17

Hotkeys ............................................................................................................................................................ 18

OSD Setting ..................................................................................................................................................... 19

Luminance ................................................................................................................................................ 20

Image Setup ............................................................................................................................................. 22

Color Setup ............................................................................................................................................... 24

Picture Boost ............................................................................................................................................ 26

OSD Setup ............................................................................................................................................... 28

Extra ......................................................................................................................................................... 30

Exit ........................................................................................................................................................... 32

LED Indicator ................................................................................................................................................... 32

Driver ...................................................................................................................................................................... 33

Monitor Driver .................................................................................................................................................. 33

Windows 7 ................................................................................................................................................ 33

Windows Vista .......................................................................................................................................... 37

Windows XP ............................................................................................................................................. 39

Windows 2000 .......................................................................................................................................... 42

Windows ME ............................................................................................................................................. 42

i-Menu .............................................................................................................................................................. 43

e-Saver ............................................................................................................................................................ 44

Screen+ ........................................................................................................................................................... 45

Troubleshoot ........................................................................................................................................................... 46

Specification ............................................................................................................................................................ 48

General Specification ....................................................................................................................................... 48

Preset Display Modes ...................................................................................................................................... 49

Pin Assignments .............................................................................................................................................. 50

Plug and Play ................................................................................................................................................... 51

Regulation ............................................................................................................................................................... 52

FCC Notice ...................................................................................................................................................... 52

WEEE Declaration ........................................................................................................................................... 53

EPEAT Declaration .......................................................................................................................................... 54

Service .................................................................................................................................................................... 55

Warranty Statement for Europe ........................................................................................................................ 55

Warranty Statement for North & South America (excluding Brazil) ........................................................... 57

Safety

National Conventions

The following subsections describe notational conventions used in this document.

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.

These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of your computer system.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some

warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific

presentation of the warning is mandated by regulatory authority.

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure

of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug

will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire

plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat

the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect

the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate

configured receptacles marked between 100 - 240V ~, Min. 5A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc/) which have UL,CSA listed license

(Only for monitors with power adapter).

Manufacturers:

1) TPV ELECTRONICS(FUJIAN) CO., LTD model : ADPC1236

HONOR ELECTRONIC CO., LTD model : ADS-45NP-12-1 12036G

Output 19Vdc

HONOR ELECTRONIC CO., LTD model : ADS-40SG-19-3 19025G

Installation

Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a

person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by

the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and

use mounting accessories recommended by the manufacturer. A product and cart combination should be moved

with care.

Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or

electric shock. Never spill liquids on the monitor.

Do not place the front of the product on the floor.

Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence

overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on

the stand:

Installed with stand

Cleaning

Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of

strong-detergent which will cauterize the product cabinet.

When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough

as it will scratch the screen surface.

Please disconnect the power cord before cleaning the product.

Other

If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and

contact a Service Center.

Make sure that the ventilating openings are not blocked by a table or curtain.

Do not engage the LCD monitor in severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Setup

Contents in Box

Not all signal cables (Analog, DVI, and HDMI cables) will be provided for all countries and regions. Please

check with the local dealer or AOC branch office for confirmation.

CD Manual Monitor Base Stand

Power Cable Analog Cable DVI Cable HDMI

Setup Stand & Base

Please setup or remove the base following the steps as below.

Setup:

Remove:

Unit standing without base is available. (Caution: must put unit in flat surface. Any uneven or sloped surface may

result unit damaged or injury to user.)

Adjusting Viewing Angle

For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to

your own preference.

Hold the stand so you will not topple the monitor when you change the monitor's angle.

You are able to adjust the monitor's angle from -3° to 25 °.

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Connecting the Monitor

Cable Connections In Back of Monitor and Computer:

D-SUB

Power

To protect equipment, always turn off the PC and LCD monitor before connecting.

1 Connect the power cable to the AC port on the back of the monitor.

2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the

computer's D-Sub port.

3 Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, please refer

Troubleshooting.

Adjusting

Setting Optimal Resolution

Windows Vista

For Windows Vista:

1 Click START.

2 Click CONTROL PANEL.

3 Click Appearance and Personalization.

4 Click Personalization

5 Click Display Settings.

6 Set the resolution SLIDE-BAR to 1600 by 900.

Windows XP

For Windows XP:

1 Click START.

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Click Appearance and Themes.

5 Double click DISPLAY.

6 Click SETTINGS.

7 Set the resolution SLIDE-BAR to 1600 by 900.

Windows ME/2000

For Windows ME/2000:

1 Click START.

2 Click SETTINGS.

3 Click CONTROL PANEL.

4 Double click DISPLAY.

5 Click SETTINGS.

6 Set the resolution SLIDE-BAR to 1600 by 900.

Hotkeys

Power

Press the Power button to turn on/off the monitor.

Menu/Enter

Press to display the OSD or confirm the selection.

Eco (DCR)/ -

Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. (Eco

mode hot key may not be available in all models).

4:3 or Wide/+

When there is no OSD, press > continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or

input signal resolution is wide format, the hot key is disabled to adjust.)

Source/Auto / Exit

When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to do auto configure (only for

the models with dual or more inputs).

When the OSD is closed, press Auto/Source/Exit button will be Source hot key function (Only for the models with

dual or more inputs).

OSD Setting

Basic and simple instruction on the control keys.

1. Press the MENU-button to activate the OSD window.

2. Press or to navigate through the functions. Once the desired function is highlighted, press the

MENU-button to activate it. If there is a sub-menu, press or to navigate through the sub-menu

functions. Once the desired function is highlighted, press MENU-button to activate it.

3. Press or to change the settings of the selected function. Press AUTO to exit. If you want to

adjust any other function, repeat steps 2-3.

4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then

press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button

while the monitor is off and then press power button to turn the monitor on.

Notes:

1. If the product has only one signal input, the item of "Input Select" is disabled to adjust.

2. If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disabled to

adjust.

3. One of DCR, Color Boost, and Picture Boost functions is activated; the other two functions are turned off

accordingly.

Luminance

Press (Menu) to display menu.

Press or to select (Luminance), and press to enter.

Press or to select submenu, and press to enter.

Press or to adjust.

Press to exit.

Brightness 0-100 Backlight Adjustment

Contrast 0-100 Contrast from Digital-register.

Eco mode

Standard Standard Mode

Text Text Mode

Internet Internet Mode

Game Game Mode

Movie Movie Mode

Sports Sports Mode

Gamma

Gamma1 Adjust to Gamma1

Gamma2 Adjust to Gamma 2

Gamma3 Adjust to Gamma 3

DCR

Off Disable dynamic contrast ratio

On Enable dynamic contrast ratio

Image Setup

Press (Menu) to display menu.

Press or to select (Image Setup), and press to enter.

Press or to select submenu, and press to enter.

Press or to adjust.

Press to exit.

Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.

Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise

Sharpness 0-100 Adjust picture sharpness

H.Position 0-100 Adjust the horizontal position of the picture.

V.Position 0-100 Adjust the vertical position of the picture.

Color Setup

Press (Menu) to display menu.

Press or to select (Color Setup), and press to enter.

Press or to select submenu, and press to enter.

Press or to adjust.

Press to exit.

Color setup.

Warm Recall Warm Color Temperature from EEPROM.

Normal Recall Normal Color Temperature from EEPROM.

Cool Recall Cool Color Temperature from EEPROM.

sRGB Recall SRGB Color Temperature from EEPROM.

User

Red Red Gain from Digital-register

Green Green Gain Digital-register.

Blue Blue Gain from Digital-register

DCB Mode

Full Enhance on or off Disable or Enable Full Enhance Mode

Nature Skin on or off Disable or Enable Nature Skin Mode

Green Field on or off Disable or Enable Green Field Mode

Sky-blue on or off Disable or Enable Sky-blue Mode

AutoDetect on or off Disable or Enable AutoDetect Mode

DCB Demo On or off Disable or Enable Demo

Picture Boost

Press (Menu) to display menu.

Press or to select (Picture Boost), and press to enter.

Press or to select submenu, and press to enter.

Press or to adjust.

Press to exit.

Frame Size 14-100 Adjust Frame Size

Brightness 0-100 Adjust Frame Brightness

Contrast 0-100 Adjust Frame Contrast

H. position 0-100 Adjust Frame horizontal Position

V.position 0-100 Adjust Frame vertical Position

Bright Frame on or off Disable or Enable Bright Frame

OSD Setup

Press (Menu) to display menu.

Press or to select (OSD Setup), and press to enter.

Press or to select submenu, and press to enter.

Press or to adjust.

Press to exit.

H.Position 0-100 Adjust the horizontal position of

OSD

V.Position 0-100 Adjust the vertical position of OSD

Timeout 5-120 Adjust the OSD Timeout

Transparence 0-100 Adjust the transparence of OSD

Language Select the OSD language

Extra

Press (Menu) to display menu.

Press or to select (Extra), and press to enter.

Press or to select submenu, and press to enter.

Press or to adjust.

Press to exit.

Input Select Analog Select Analog Signal Source as Input

Auto Config yes or no Auto adjust the picture to default

Off timer 0-24hrs Select DC off time

Image Ratio wide or 4:3 Select wide or 4:3 format for display

DDC-CI yes or no Turn ON/OFF DDC-CI Support

Reset Yes or no Reset the menu to default

Information Show the information of the main image and

sub-image source

Exit

Press (Menu) to display menu.

Press or to select (Exit), and press to exit.

Exit Exit the main OSD

LED Indicator

Status LED Color

Full Power Mode Blue

Active-off Mode Orange

Driver

Monitor Driver

Windows 7

1. Start Windows® 7

2. Click on the 'Start' button and then click on 'Control Panel'.

3. Click on the 'Display' icon.

4. Click on the “Change display settings” button.

5. Click the “Advanced Settings” button.

6. Click the “Monitor” tab and then click the “Properties” button.

7. Click the “Driver” tab.

8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “ and then

click the "Browse my computer for driver software" button.

9. Select "Let me pick from a list of device drivers on my computer".

10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:

X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).

11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button.

12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk

drive.

13. Close all open windows and remove the CD.

14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color

Matching Profiles.

Windows Vista

1. Click "Start" and "Control Panel". Then, double-click on "Appearance and Personalization".

2. Click "Personalization" and then "Display Settings".

3. Click "Advanced Settings...".

4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for

your monitor is completed. The monitor can be used as is.

If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".

5. Click "Update Driver..." in the "Driver" tab.

6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device

drivers on my computer".

7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive

F:\Driver (CD-ROM Drive).

8. Select your monitor model and click on the 'Next' button.

9. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.

Windows XP

1. Start Windows® XP.

2. Click on the 'Start' button and then click on 'Control Panel'.

3. Select and click on the category ‘Appearance and Themes’.

4. Click on the 'Display' Item.

5. Select the 'Settings' tab then click on the 'Advanced' button.

6. Select 'Monitor' tab

- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.

- If the 'Properties' button is active, click on 'Properties' button.

Please follow the steps below.

7. Click on the 'Driver' tab and then click on 'Update Driver...' button.

8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.

9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.

10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:

(CD-ROM Drive).

11. Click on the 'Open' button, then click the 'OK' button.

12. Select your monitor model and click on the 'Next' button.

- If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP'

message, please click on the 'Continue Anyway' button.

13. Click on the 'Finish' button then the 'Close' button.

14. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.

Windows 2000

1. Start Windows® 2000.

2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.

3. Double click on the 'Display' Icon.

4. Select the 'Settings' tab then click on 'Advanced...'.

5. Select 'Monitor'

- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.

- If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.

6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.

7. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on

'Next' and then click on 'Have disk...'.

8. Click on the 'Browse...' button then select the appropriate drive F: (CD-ROM Drive).

9. Click on the 'Open' button, then click on the 'OK' button.

10. Select your monitor model and click on the 'Next' button.

11. Click on the 'Finish' button then the 'Close' button.

If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.

Windows ME

1. Start Windows® Me

2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.

3. Double click on the 'Display' Icon.

4. Select the 'Settings' tab then click on 'Advanced...'.

5. Select the 'Monitor' button, then click on 'Change...' button.

6. Select 'Specify the location of the driver (Advanced)' and click on the 'Next' button.

7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click

on 'Next' and then click on 'Have Disk...'.

8. Click on the 'Browse...' button, select the appropriate drive F: (CD-ROM Drive) then click on the 'OK' button.

9. Click on the 'OK' button, select your monitor model and click on the 'Next' button.

10. Click on 'Finish' button then the 'Close' button.

i-Menu

Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on

screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation

guide.

e-Saver

Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown

functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or

Screen Saver); the actual shutdown time depends on your preferences (see example below).

Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to

complete software installation.

Under each of the four PC statuses, you may choose the desired time (in minutes) from the pull-down menu for

your monitor to automatically shutdown. The example below illustrated:

1) The monitor will never shutdown when the PC is powered on.

2) The monitor will automatically shutdown 5 minutes after the PC is powered off.

3) The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode.

4) The monitor will automatically shutdown 20 minutes after the screen saver appears.

You can click “RESET” to set the e-Saver to its default settings like below.

Screen+

Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop

into different panes, each pane displays a different window. You only need to drag the window to a corresponding

pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the

installation software to install it.

Troubleshoot

Problem & Question Possible Solutions

Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected

to a grounded power outlet and to the monitor.

No images on the screen

z Is the power cord connected properly?

Check the power cord connection and power supply.

z Is the cable connected correctly?

(Connected using the D-sub cable)

Check the DB-15 cable connection.

(Connected using the DVI cable)

Check the DVI cable connection.

* DVI input is not available on every model.

z If the power is on, reboot the computer to see the initial screen (the login

screen), which can be seen.

If the initial screen (the login screen) appears, boot the computer in the

applicable mode (the safe mode for Windows ME/XP/2000) and then

change the frequency of the video card.

(Refer to the Setting the Optimal Resolution)

If the initial screen (the login screen) does not appear, contact the

Service Center or your dealer.

z Can you see "Input Not Supported" on the screen?

You can see this message when the signal from the video card exceeds

the maximum resolution and frequency that the monitor can handle

properly.

Adjust the maximum resolution and frequency that the monitor can

handle properly.

z Make sure the AOC Monitor Drivers are installed.

Picture Is Fuzzy & Has

Ghosting Shadowing Problem

Adjust the Contrast and Brightness Controls.

Press to auto adjust.

Make sure you are not using an extension cable or switch box. We

recommend plugging the monitor directly to the video card output connector

on the back.

Picture Bounces, Flickers Or

Wave Pattern Appears In The

Picture

Move electrical devices that may cause electrical interference as far away

from the monitor as possible.

Use the maximum refresh rate your monitor is capable of at the resolution

your are using.

Monitor Is Stuck In Active

Off-Mode"

The Computer Power Switch should be in the ON position.

The Computer Video Card should be snugly fitted in its slot.

Make sure the monitor's video cable is properly connected to the computer.

Inspect the monitor's video cable and make sure no pin is bent.

Make sure your computer is operational by hitting the CAPS LOCK key on

the keyboard while observing the CAPS LOCK LED. The LED should either

turn ON or OFF after hitting the CAPS LOCK key.

Missing one of the primary

colors (RED, GREEN, or

BLUE)

Inspect the monitor's video cable and make sure that no pin is damaged.

Make sure the monitor's video cable is properly connected to the computer.

Screen image is not centered

or sized properly Adjust H-Position and V-Position or press hot-key (AUTO).

Picture has color defects

(white does not look white) Adjust RGB color or select desired color temperature.

Horizontal or vertical

disturbances on the screen

Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and

FOCUS.

Press to auto-adjust.

Specification

General Specification

Panel

Model name e2051Sn

Driving system TFT Color LCD

Viewable Image Size 508.05 mm diagonal

Pixel pitch 0.0922*RGB(H)mm x 0.2766(V)mm

Video R, G, B Analog lnterface

Separate Sync. H/V TTL

Display Color 16.7M Colors

Dot Clock 140 MHz

Resolution

Horizontal scan range 30kHz - 83kHz

Horizontal scan

Size(Maximum) 442.8 mm

Vertical scan range 50Hz - 76Hz

Vertical scan Size(Maximum) 249.075mm

Optimal preset resolution 1600×900@60Hz

Plug & Play VESA DDC2B

Input Connector VGA

Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive

Power Source 100-240V , 50/60Hz

Power Consumption

Standby < 0.5 W

Off timer 0-24 hrs

Physical

Characteristics

Connector Type VGA

Signal Cable Type Detachable

Dimensions & Weight:

Height (with base) 391.3 mm

Width 479 mm

Depth 178.7 mm

Weight (monitor only) 1.912 kg

Weight (with packaging) 3.070 kg

Environmental

Temperature:

Operating 0° to 40°

Non-Operating -25°to 55°

Humidity:

Operating 10% to 85% (non-condensing)

Non-Operating 5% to 93% (non-condensing)

Altitude:

Operating 0~ 2000m (0~ 6512 ft )

Non-Operating 0~ 12192m (0~ 40000 ft )

Typical: 21W (Max:26W)

Preset Display Modes





VGA

640x480@60Hz31.46959.940

640x480@72Hz37.86172.809

640x480@75Hz37.50075.00

SVGA

800x600@56Hz35.15656.250

800x600@60Hz37.87960.317

800x600@72Hz48.07772.188

800x600@75Hz46.87575.000

XGA

1024x768@60Hz48.36360.004

1024x768@70Hz56.47670.069

1024x768@75Hz60.02375.029

720P1280x720@60Hz45.00060.000

WSXGA1600x900@60Hz60.00060.000

IBMMODES

DOS720x400@70Hz31.46970.087

MACMODES

VGA640x480@67Hz35.00066.667

SVGA832x624@75Hz49.72574.551

STAND RESOLUTION HORIZONTAL

FREQUENCY(kHZ) VERTICAL

FREQUENCY(Hz)

Pin Assignments

Pin Number 15-Pin Side of the Signal Cable Pin Number 15-Pin Side of the Signal Cable

1 Video-Red 9 +5V

2 Video-Green 10 Ground

3 Video-Blue 11 N.C.

4 N.C. 12 DDC-Serial data

5 Detect Cable 13 H-sync

6 GND-R 14 V-sync

7 GND-G 15 DDC-Serial clock

8 GND-B

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the

monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional

information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over

the DDC2B channel.

Regulation

FCC Notice

FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTICE:

The changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this

equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to

correct such interference.

WEEE Declaration

Disposal of Waste Equipment by Users in Private Household in the European Union.

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other

household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a

designated collection point for the recycling of waste electrical and electronic equipment. The separate collection

and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure

that it is recycled in a manner that protects human health and the environment. For more information about where

you can drop off your waste equipment for recycling, please contact your local city office, your household waste

disposal service or the shop where you purchased the product.

EPEAT Declaration

EPEAT is a system to help purchasers in the public and private sectors evaluate, compare and select desktop

computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and

consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to

secure market recognition for efforts to reduce the environmental impact of its products.

AOC believes in protecting the environment.

With a key concern for the conservation of natural resources, as well as land ll protection, AOC announces the

launch of AOC monitor’s packaging recycling program. This program is designed to help you discard of your

monitor carton and ller materials properly. If a local recycling center is not available, AOC will recycle the

packaging material for you, including foam ller and carton. AOC Display solution will only recycle AOC monitor

packaging. Please refer to the following website address:

Only for North and South American, excluding Brazil:

http://us.aoc.com/about/environmental_impact

For Germany:

http://www.aoc-europe.com/en/service/tco.php

For Brazil:

http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134

Service

Warranty Statement for Europe

LIMITED THREE-YEAR WARRANTY*

AOC Color Monitors sold within Europe

AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a

period of Three (3) years after the original date of consumer purchase. During this period, AOC International

(Europe) GmbH will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a

new or rebuilt product at no charge except as *stated below. The defective products that are replaced become the

property of AOC International (Europe) GmbH.

If the product appears to be defective, please contact your local dealer or refer to the warranty card when attached

to the product.

Deliver the product freight pre-paid, along with the dated proof of purchase, to the AOC Authorized Service Center.

If you cannot deliver the product in person:

Pack it in its original shipping container (or equivalent)

Put the RMA number on the address label

Put the RMA number on the shipping carton

Insure it (or assume the risk of loss/damage during shipment)

Pay all shipping charges

AOC International (Europe) GmbH is responsible neither for any damage or loss during inbound transport damage

nor to inbound product that was not properly packaged.

AOC International (Europe) GmbH will pay the return shipping charges within one of the countries specified within

this warranty statement. AOC International (Europe) GmbH is not responsible for any costs associated with the

transportation of product across international borders. This includes the international border within the European

Union.

* This limited warranty does not cover any losses or damages that occur as a result of

Shipping or improper installation or maintenance

Misuse

Neglect

Any cause other than ordinary commercial or industrial application

Adjustment by non-authorized source

Repair, modification, or installation of options or parts by anyone other than an AOC Authorized Service Center

Improper environment

Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other irregularities

This limited warranty does not cover any of the product firmware or hardware that you or any third party have

modified or altered; you bear the sole responsibility and liability for any such modification or alteration.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A

PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER

PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.

AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY

AND EXCLUSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) GMBH LIABILITY, WHETHER

BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED

THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO

EVENT SHALL AOC INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF

USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY

GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM

COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE

MEMBER COUNTRIES OF THE EUROPEAN UNION.

Information in this document is subject to change without notice.

For more details, please visit: http://www.aoc-europe.com/en/service/index.php

Warranty Statement for North & South America (excluding Brazil)

WARRANTY STATEMENT

for AOC Color Monitors

Including those Sold within North America as Specified

Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of

three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer

purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either

repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except

as *stated below. The parts or product that are replaced become the property of EPI.

In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center

closest to your area. Deliver the product freight pre-paid, along with the dated proof of purchase, to the EPI

Authorized Service Center. If you cannot deliver the product in person:

Pack it in its original shipping container (or equivalent)

Put the RMA number on the address label

Put the RMA number on the shipping carton

Insure it (or assume the risk of loss/damage during shipment)

Pay all shipping charges

EPI is not responsible for damage to inbound product that was not properly packaged.

EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is

not responsible for any costs associated with the transportation of product across international borders. This

includes the international borders of the countries within this warranty statements.

In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free

number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty.

* This limited warranty does not cover any losses or damages that occur as a result of:

Shipping or improper installation or maintenance

Misuse

Neglect

Any cause other than ordinary commercial or industrial application

Adjustment by non-authorized source

Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center

Improper environment

Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities

This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third

party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A

PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL

FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR

IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT

ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY

NOT APPLY TO YOU.

EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE.

EPI’ LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER

THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE

BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF

PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION

MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.

YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

In the United States of America, this limited warranty is only valid for Products purchased in the Continental United

States, Alaska, and Hawaii.

Outside the United States of America, this limited warranty is only valid for Products purchased in Canada.

Information in this document is subject to change without notice.

For more details, please visit:

USA: http://us.aoc.com/support/find_service_center

ARGENTINA: http://ar.aoc.com/support/find_service_center

BOLIVIA: http://bo.aoc.com/support/find_service_center

CHILE: http://cl.aoc.com/support/find_service_center

COLOMBIA: http://co.aoc.com/support/find_service_center

COSTA RICA: http://cr.aoc.com/support/find_service_center

DOMINICAN REPUBLIC: http://do.aoc.com/support/find_service_center

ECUADOR: http://ec.aoc.com/support/find_service_center

EL SALVADOR: http://sv.aoc.com/support/find_service_center

GUATEMALA: http://gt.aoc.com/support/find_service_center

HONDURAS: http://hn.aoc.com/support/find_service_center

NICARAGUA: http://ni.aoc.com/support/find_service_center

PANAMA: http://pa.aoc.com/support/find_service_center

PARAGUAY: http://py.aoc.com/support/find_service_center

PERU: http://pe.aoc.com/support/find_service_center

URUGUAY: http://pe.aoc.com/support/find_service_center

VENEZUELA: http://ve.aoc.com/support/find_service_center

IF COUNTRY NOT LISTED: http://latin.aoc.com/support/find_service_center

WARRANTY

PERIOD COVERAGE AT

NO CHARGE CUSTOMER

CHARGES

Within the first three months of

purchase: Covered by EASE

- New AOC monitor

- Call tag dispatched and return freight

charges via UPS

- None*

Between 4 months – 1 Year - All Parts & Labor Including CRT

Tube & LCD Panel

- UPS Return Freight to AOC

Between 1 Year - 3 Years:

Covered by standard limited

warranty

- Parts & Labor (excluding CRT Tube

& LCD Panel)

- UPS Return Freight to AOC

Only for AOC branded monitors sold within the continental United States.

All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time

during the first three months, AOC will provide a replacement monitor within 72 hours after you are approved

for our program. If your monitor qualifies for the EASE program, AOC will pay for freight both ways.

Step 1: Phone our TECH Department at 888.662.9888

Step 2: Fill out and return EASE registration forms by mail or fax.

Step 3: We will issue a Return Authorization Number upon verification into the program.

Step 4: A monitor will be advance shipped to your location.

Step 5: We will issue a UPS Call Tag to pick up the defective unit.

Step 6: Please review the following chart to see your EASE program qualifications.

*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit

arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC

service center.

.aoc.com

Aoc E2051Sn Owner S Manual E2251Fw English 20110401

Navigation menu

Versions of this User Manual:

Views

Navigation