Apex Drone GD90C-RD Hunter User Manual

Apex Drone (Shenzhen) Co.,Ltd. Hunter Users Manual

User Manual

3546811 User ManualNO.GD-90C910Standard componentsName of components1xDrone 1x ControllerController instructionBattery InstallationCalibration between drone and controllerOn a flat surfaceSchematic diagram of drone power connectionController’s function Correct operations of droneFlip operations of droneChargingThe application of AppAPP download and installationAT96_XXXXXXGD145_XXXXXX2.The Wifi connectionThe name of wifiConnected(1) please open your drone first and connect your mobile WIFI hotspot to AT96_XXXXXX ".(2)Enter the APP. If the mobile APP is successfully connected to the drone, you can see real-time image transmission in the APP.It can be controlled remotely by a mobile phone.(3) The remote control is invalid when the mobile phone controls the drone;Mobile phone control is invalid when the remote control controls the drone.Operating instructions of APP1.After installing the APP on the phone, click enter and the following screen appears.Push the throttle lever up ,drone will fly up.Push the throttle lever down,drone will fly down.Push the throttle lever to left,drone will turn left.Push the throttle lever to right,drone will turn right.DescentAscentTurn rightThrottle(Top position)Throttle(zero position)Spin aroundTurn leftPush the direction lever up,drone will fly forward.Push the direction lever down,drone will fly backward.Push the direction lever left,drone will fly to left.Push the direction lever right ,drone will fly right. RightLeftLeft/RightFly backwardFlight forwardand backwardFly forwardbackwardFRFRReplace bladesTo achieve optimal flight function, the blades need to be checked or replaced after multiple flights.Emergency landings, especially from high altitude will damage blades.1. When replacing the blades, please make sure that the letters on the blades (F is the forward rotating blades,R is the reverse blades, letters are on the back of the blades).2. Pay special attention to replacing damaged blades with properly blades.Must not change the wrong direction of the blades!F=front left positive blades R=front right reverse bladesR=back left positive blades F=back right positive bladesforwardDownload the APP according to your mobile phone system model, as follows:1. Android SystemA: Search for the keyword 'AT-96' in Baidu mobile assistant APP (Android market or 91 Assistant) to download.Or use a browser to scan a QR code to downloadIf scan code download fail, please download in Baidu mobile assistant APPB: on Google play: search for the keyword 'AT-96' to download2.For IOS system Please go to App store, enter the key word "AT-96" to download the app.Direction leverThrottle leverTake photo Take videoAlbum SettingsOne key to take offOne key to return TrimSpeedOne key to landLever throttle G-sensor WIFI state Power state<8Headless mode3. Throttle leverTurn on the Throttle lever, and the drone indicator light will be always on. At this time, you can fly through the vir tual handle.4.Please refer to P4 for throttle and direction control .5. Take picturesTrigger the APP photo function;Short press the remote control also can take photos.6.Camera shootingTrigger the APP camera shooting function, the camera shooting starts, and trigger the camera again,it will stop camera shooting.Long press the remote control camera function can also be used for camera shooting.7. Gravity inductionTrigger the gravity sensor, which controls the drone's direction by sensing the earth's gravity through the phone's built-in sensor chip.8. WIFI stateThis icon displays the signal strength of the drone connected to the remote control.9. Photo albumClick on this to view the photos and recorded video you take.10.Gesture PhotograpyClick the setting button in the lower right corner of the screen,then turn on the thumb automatic camera switch and return to image interface.A rectangle frame will appear in the middle of the screen.Then put your thumb and place it in the frame and it will automatically take photos after countdown 3 seconds.(The best working range of gesture photography is 0.5-3 meters).CautionBefore you fly the drone, please do some simulated flight practice.Step twoStep oneWARNING 4x Blades 1x User manual1x USB Charger1x Screw driver Li-Po Battery1x Mobile phone plas tic holderbattery typeLithium batteriesbattery specification using timedrone flight time :6-8minscharging timeabout 50 mins(charging current approx 0.5A)3.7V 400 mAhBattery and charge specificationlight on light blinkcharging Ready modelight offcharge completedinput charging current full voltageLED indicator Charging specificationNotice 5V 420-450 mA 4.2V 0.05V+_Problem shootingTroubles Causes123456Turn on the drone ,LED blinks ,while the drone has no responding to all commandsPair between drone and controller failed(please refer to the frequency alignment of remote controller and receiver in P3)The battery died Charge the drone Put the throttle lever to zero position 1.Change the blades2.Charge the drone1.Install the blades2.Replace the blades3.Refer to p3 for calibration1.Tighten the blades2.Replace the bladesThrottle lever is not at the zero position 1.Blades may installed wrong2.No enough power 1.Blades may installed wrong2.Blades get damaged3.Calibration failed1.Blades are getting lose2.Blades get damagedTurn on the drone ,the drone has no reaction to the commands Blades keep moving after landingBlades keep moving ,while the drone can not take off After trimming ,drone keeps spin,and the speed of blades is different The drone can not take off after dropSolutionsFCC Statement FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reasonable protection against harmful interference in a re sidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisi on reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit di fferent from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interf erence that may cause undesired operation. Changes or modifications not expressly approv ed by the party responsible for compliance could void the user's authority to operate the equipment. Front flip:move directionlever forward.Back flip:move directionlever backward.Left/Right flip:move the direction lever left/right.Press the “Flip” button,the controller will beep.Press the “Flip” button,the controller will beep. Left flipRight flipFront flipBack flip7.Stable flight, flexible, easy realize 3D flip7CameraCamera boardPositive rotor bladesReverse rotor bladesUpper bodyProtected shellBottom shellPositive rotor Reverse rotor Lithium batteryReceiver boardBattery chargeMobile phone adapterφOutput: 5VCharging current: 1-2A..Cautions:1.Be sure to check your surroundings before flying.2. Do not let the drone fly out of sight while flying.3. Children cannot fly alone. Please fly with adults.4. Please confirm that there is no other product using the same frequency band in the same area.* The chargers, wires, plugs, shells and other parts shall be checked regularly. If any damage is found, it shall be discontinued until it is repaired.* Only use original charger, charger is not toy.* Please clean the product with a clean and soft cloth. The drone should be disconnected from the charger before cleaning.* Adult supervision is required when charging a rechargeable batter y.A non-rechargeable battery is not rechargeable.* Do not short circuit, decompose, fall into the air or put into fire.* For the long time not operate product . Please remove the battery.* Do not seriously crash or drop the drone and remote controller.* This packing and instruction manual contains important information about the product. Please keep it.WARNINGImportant statementDon’t fly the drone in below conditionsUnder the Signal tower, high voltage poleAn amusement places with too many peopleA field of rain and thunderNear Airport , rail cars Roads and nearby places Near trees/r ivers Strong and romantic environment1. This product is applicable to teenagers and adults over the age of 14. This remote controlled four-axis drone has certain difficulties at the early stage of learning.Suggest only fly under the guidance of someone with operational experience.2. This product is designed with high and new technology in many aspects such as electronics and machinery. For those with less experience operator, it should be kept away from people during flight.We are not responsible for any serious personal injury or property loss which may result from improper operation.3. Once the product is sold, we will not assume any safety responsibilities such as accidents occurred during operation or use.4. In case of problems of use, operation and maintenance, you can contact local dealers to provide technical support or after-sales service.Short press speed switch/long press flip Short press take photo/long press take videoHeadless modeOn/OffDirection leverTrim(left/right)Trim(forward/backward)Throttle leverOne key returnOne key to t ake offOne key to land* As shown in the picture,remove the battery cover of the remote control, according to the battery pole in the battery box.Install 2pcs of No.7/ AAA batteries correctly (Additional purchase) and reload the batteries cover and tighten the screws.Note:A. when installing the battery, the positive and negative poles of the battery must be identified, and the positive and negative poles of the battery box must be identified.Please don't install wrong.B. Do not mix new and old batteries or different types of batteries.The pool batteries should be taken out in time.The battery warningRechargeable battery:This drone can use rechargeable lithium batteries.If the batter y cannot be recharged again, dispose of the battery properly according to local treatment regulations.Remote control battery:The remote requires 2 "AAA" batteries (not included ).Read the impor tant battery safety warning below.●Do not mix with alkali, standard (carbon zinc) and rechargeable batteries (nickel hydrogen).●Don't mix old and new batteries.●Prohibits charging non-rechargeable batteries.●Rechargeable batteries should removed from the remote control (if removable) before being charged.●Rechargeable batteries can only be used under adult super vision.●Batteries shall be disassembled as soon as they are exhausted and must be properly recovered or disposed in accordance with national or local government decrees and rules.●Check supply terminals should not short circuit.●Recommends using the same or the same type of battery.●Battery shall be installed according to correct polarity (refer to internal specification).●Don't throw batteries in the fire that could cause a leak or explosion.1.On/off(1)OnLong press "On/Off" button to turn on the controller .(2) OffLong press "On/Off" button to turn off the controller .2.Lock/UnlockTurn on the controller first ,then turn on the Drone power. When you hear the "beep beep beep" sounds, the indicator lights always on, it means the code match completed. Push the throttle lever to left corner, push direction lever to the right corner (push them at the same time), to start the motor. When the motor starts work, release both lever. Push throttle lever to the right corner, push the direction lever to the left corner (Push them at the same time),the motor will be stop.3.Throttle controlAfter unlock the controller, push the throttle more than middle ,the drone will take off.Push the throttle lower than middle ,the drone will decline.Leave the throttle in middle, drone will hold its altitude.4.One key take off /One key landingAfter unlock the controller, press "One key take off/One key landing" button,drone will hoverone meter above the ground. Press again, drone will land automatically.5.Turning(Left/Right)After the drone lift-off, push the throttle lever to left /right, the drone will turn left/ right .6.Forward/BackwardAfter the drone lift-off, push the direction lever to up/down, the drone will fly forward/backward.7.Left and rightAfter the drone lift-off, push the direction lever to left/right, the drone will fly to left/right.8.TrimAfter the drone take off, without move the throttle, if the drone’s direction is moving, press"trim" button to adjust the direction.9.Take photo/videoShort press "Take picture/video" button to take photo, long press it to take video. Photosand videos will save in the app .10. Short Press to Change SpeedShort press the button to adjust the speed. There has three speed level, when the buzzer beep comes one sounds, it’s speed level one, drone will move slowly. When the buzzer beep comes two sounds,it’s speed level two. When the buzzer beep comes three sounds, its level three, which is the fastest speed level. 11.Headless modeStart and settings: Short press the headless mode button, the remote control beeps twice,the drone indicator light flashes slowly, headless mode start.Now the direction of thedrone’s head is the front of headless mode.If there has a crash or flying forwarddeviation, please restart to adjust the required direction frequency.Exit headless mode: Short press the headless mode button again, (the remote control beeps and the drone indicator light is always on),it is exit headless mode.In headless mode, no matter which direction the head of the drone turns, the current position of the remote control is the right and behind of the drone. At this moment, pull down the joystick it can recall the drone. Push the joystick up, the aircraft can flight far away.12.On key to returnWhen the rear of the drone are aligned with the pilot, after a short press the button, thedrone will automatically return. If offtrack happen during return you can correct thechannel through the left and right joystick.Short press the button again to end the returntrip.Use the back and forth direction joystick also can end the return trip.During the flight, when you hear the "beeps" sounds from the remote control,it indicates that the Drone's battery voltage is not enough, so the drone should fall behind to recharge.It need to charge it with the special charger we gave.During the flight, when the remote control indicator lights flicker, it indicates that the remote control battery voltage is not enough, please replace the remote control battery.1. Remove the lithium battery from the drone, insert one end of the charging cable with the USB port into the phone adapter interface, and then the interface with the plug on the other end is correctly connected to the battery socket.2. Plug the charging cable into the USB port of the computer host. The method is the same as above, and the charging can also be completed.3. The indicator light is always on under the charging state, and it will automatically crush out when the battery reaches the full state.4. When the charging line is inserted into the USB port and lithium battery is not plugged into the charging line, the indicator light of the charging line flashes is a normal condition.As shown in the picture, push both joystick of the remote control to the lower right corner at the same time.When the indicator light of the drone flashes quickly, release the remote control and wait for the indicator light keep on lighting.The remote control will comes “beep beep” sounds and the calibration completed.If long time not used it, please take out the battery of the remote control and keep it properly.Note: If not remove the batteries of the remote control,store it for long time will cause leakage of battery and damage the remote control, even cause the risk of burning.First, turn on the switch button of the remote control, and then switch on the power switch of the drone.Put the tail of the drone point at you and put it on the horizontal surface.At the same time the remote control will be comes "beep, beep beep" sounds,it indicates a successful matching code.Important note: The drone turn on/off needs to connect the battery line and power line.Because the internal gyros need to be horizontal calibrated after the drone open, so please must put it in the horizontal surface place.7CautionsCautions ● Confirm again that the screws and blades are firm.● Verify that the remote controller and drone’s batteries are sufficient.● Confirm again that the direction of the wind blade is fitting in right position. ● Make sure there are no other people or obstacles in the flying area.● In order to fly safely, you must first practice the hover, which is the basis of the flight action (hover: the drone stays in the air and maintains a fixed position).● Please stand 2 meters behind the drone during practice. Flight adjustment and notice for beginners1.Throttle lever practice2.Direction control practiceThrottle control is in the left hand,push throttle rocker up slowly, immediately release the rocker, the drone will rise and hold at a fixed height; Pull the lever slowly down, and release the lever immediately, and the drone will descend and stay at a fixed height.Repeat until you are able to control the drone to any height, and you are stable settle down to the ground.1. Practice forward and backward, it’s in the right hand up and down direction.Keep the drone at a certain height.Then fly one meter forward slightly,after the drone stabilized, fly back one meter .And repeat this practice.2. Practice left and right side flying,it’s in the right hand left and right direction.side.The method is the same as above. 3.Rotation practiceAs you become familiar with the step 1-3, draw a circle on the ground and practice within the circle.It can increase your control accuracy.As you get more comfortable with the action, you can draw smaller circles.Caution 4.Precision practice 1. Slowly raise the throttle lever to control the drone to a certain height.2. Push the throttle lever to the left/right slowly, make the dronerotate counterclockwise/clockwise slowly.When the drone is flying far away, please lower the throttle and land the drone, then walk to the right astern of the drone for 2 meters and continuing the practice.Or bring it back to the home position keep practicing.5.Change the direction of droneWhen you feel familiar with Step 1-4, stand on the side facing the drone and continue to practice Step 1-4.Then, stand in front of the drone and repeat the steps.Slowly lift the throttle lever. When the drone has just left the ground, if the drone tends to move around, you can used trimming to correct the action.1. After the drone takes off,if the drone slowly shift to the forward/backward direction,you can press forward/backward (as shown in the figure) to adjust;When it forward offset,trim down to adjust;When it backward offset, trim up to adjust (Without controlling the direction, slight deviation belongs to normal condition,drone without fixed point function).2. After the drone takes off,if the drone slowly shift to the left/right direction,you can press left/right (as shown in the figure) to adjust;When it right offset,trim left to adjust;When it right offset, trim left to adjust.forwardbackwardleft right6.TrimChildren under 14 are prohibited to usewarning:FCC ID: 2AQT5-GD90C-RDStable flight, flexible, easy realize 3D flipWhen you're skilled in the basics above, you can play some thrilling flip moves.First, fly the drone to a height of more than 2 meters. Press flip bottom, then push the directional rocker toward the bottom of any of the four directions in front/back/left/right and then release,The drone flip in this direction, performing the flip steadily/swiftly.13-56-89-11AttentionStandard componentsName of componentsController instructionController battery installationCalibration between drone and controllerCorrect operations of droneFlip operations of droneController’s functionChargingFlight adjustment and notice for beginnersThe application of AppReplace bladesProblem shootingFCC Statement To maintain compliance with FCC s RF exposure guidelines,This equipment should be installed andoperated with minimum distance between the radiator and your body: use only the supplied 20cmantenna.’

Navigation menu