Appareo Systems 1535103 Agricultural Computing Device with Cellular/Satellite/WiFi/BT and M2M Transmitters User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	2981120
Application ID	fgFKUdTuxDc45X0AeKiBjw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.64kB (320519 bits)
Date Submitted	2016-05-05 00:00:00
Date Available	2016-05-06 00:00:00
Creation Date	2016-03-29 08:36:39
Document Lastmod	2016-03-29 08:36:39
Document Title	Manual
Document Author:	Angela Lorenz

Gateway Installation Manual
GW03
APPAREO SYSTEMS, LLC
This document and the information
contained herein are the property of
Appareo Systems, LLC and are
confidential. They may not be disseminated
or redistributed without the written
permission of Appareo Systems, LLC
DOCUMENT NUMBER
600840-000038
FARGO, NORTH DAKOTA 58102
Gateway Installation Manual
Document Type
Manual
Last Revised
3/22/16
REV
1.2
Sheet
1 of 9
Gateway Installation Manual
Rev: 1.2
Last Revised: 3/22/16
Record of Revisions
Revision
Number
1.0
1.1
1.2
Change Description
Initial Release
Change “ 30 cm separation distance” to “40 cm” per
check from NCEE test lab
Addition of “60 cm” for Canada per RSS-102. Addition of
section 3.4.4 Condition of operation section and
statement.
Document Number: 600840-000038
Effective
Date
Inserted By
1/13/16
Lee Hinsz
2/3/16
Lee Hinsz
3/22/16
Lee Hinsz
Page 2 of 9
Gateway Installation Manual
Rev: 1.2
Last Revised: 3/22/16
Table of Contents
List of Figures ............................................................................................................................ 4
List of Tables ............................................................................................................................. 4
1. SYSTEM OVERVIEW .......................................................................................................... 5
2. PURPOSE ........................................................................................................................... 5
3. GENERAL INFORMATION .................................................................................................. 5
3.1.
SPECIAL TOOLS REQUIRED ................................................................................. 5
3.2.
INSTALLATION INSTRUCTIONS OVERVIEW ........................................................ 6
3.3.
PARTS LIST FOR INSTALLATION .......................................................................... 6
3.4.
HARDWARE COMPONENTS BACKGROUND ........................................................ 7
3.4.1.
Electrical Characteristics ................................................................................... 7
3.4.2.
Weight and Balance Information........................................................................ 7
3.4.3.
Equipment Dimensions ..................................................................................... 7
3.4.4.
Conditions for operation .................................................................................... 7
4. CONFIGURATION ............................................................................................................... 8
4.1.
Gateway System Separation Distances .................................................................... 8
4.2.
Gateway System Separation Distance Illustration .................................................... 9
Document Number: 600840-000038
Page 3 of 9
Gateway Installation Manual
Rev: 1.2
Last Revised: 3/22/16
List of Figures
Figure 1 Separation Distance ..................................................................................................... 9
List of Tables
Table 1 System Component Minimum Spacing .......................................................................... 6
Table 2 Parts List for Installation ................................................................................................ 6
Table 3 Weight and Balance Information.................................................................................... 7
Table 4 Equipment Dimensions ................................................................................................. 7
Table 5 Separation Distance ...................................................................................................... 8
Document Number: 600840-000038
Page 4 of 9
Installation Manual
Rev: 1.2
Last Revised: 3/22/16
1.
SYSTEM OVERVIEW
Gateway is an embedded computer that provides interfacing capability among a variety of wired
and wireless networks. It implements WAN designs, with the additions of Bluetooth, WIFI, 433MHz radio, and Satcom interfaces.
2.
PURPOSE
This Installation Manual is intended to inform installers and users of the proper placement,
configuration and distances between system components.
3.
GENERAL INFORMATION
3.1. SPECIAL TOOLS REQUIRED
In addition to SAE standard and/or metric wrenches, sockets, and screw drivers, the following
tool are required:
1) Torque Wrench (in-lbs)
2) Wrench set
Document Number: 600840-000038
Page 5 of 9
Installation Manual
Rev: 1.2
Last Revised: 3/22/16
3.2. INSTALLATION INSTRUCTIONS OVERVIEW
System installation is accomplished in the following steps:
1) Installation of Gateway into the tractor cab headliner
a. Torque the antenna terminations to Gateway RF SMA connectors with a torque
spec of 7-10 in-lbs +/- 0.5 in-lbs. Mount the Gateway enclosure to the cab with ¼”
or 6-mm fasteners and a torque of 30 in-lbs.
2) Installation of Antennas
a. Find a location on the equipment such that the following distances are the
minimum spacing between system components.
Table 1 System Component Minimum Spacing
Antenna Hub 1
(Recommended minimum
spacing between antenna
hubs is 7.5 cm)
Operator
Gateway
40 cm (USA)
20 cm
60 cm (Canada)
Antenna Hub 2
40 cm (USA)
20 cm
60 cm (Canada)
Gateway
20 cm
N/A
b. Ensure the antennas have a ground place of 300 x 300 mm around them.
c. Torque the antenna mounting nut (M14x1) to 30 +/- 0.5 in-lbs.
3.3. PARTS LIST FOR INSTALLATION
The following parts are required for the installation of Gateway.
Table 2 Parts List for Installation
Parts List for Installation
Item
Nomenclature
Gateway
Part Number
153510-000003
Antenna Hub 1
NA
Antenna Hub 2
NA
Document Number: 600840-000038
QTY
Page 6 of 9
Installation Manual
Rev: 1.2
Last Revised: 3/22/16
3.4. HARDWARE COMPONENTS BACKGROUND
3.4.1. Electrical Characteristics
Input Power Requirements:
Current Draw at 14VDC:
9-16 VDC
250mA (nominal)
3.4.2. Weight and Balance Information
The total weight of the Garrison and antenna is listed below.
Table 3 Weight and Balance Information
Component
Weight (oz)
Gateway
Antenna Hub 1 (HCEL-S2-0164A-01 )
Antenna Hub 2 (HIRD-S2-0146A-01)
70.544
26.624
26.624
Weight (lbs)
4.409
1.664
1.664
3.4.3. Equipment Dimensions
Equipment dimensions are outlined in the table below for all required components in Gateway.
All figures given are representative of maximum equipment dimensions (where applicable).
Table 4 Equipment Dimensions
Component
Gateway
Antenna Hub 1 (HCEL-S2-0164A-01 )
Antenna Hub 2 (HIRD-S2-0146A-01)
Length
(mm)
165
124.3
124.3
Width
(mm)
159
80.3
80.3
Height
(mm)
54
80.3
80.3
3.4.4. Conditions for FCC 15.231 (a-d) operation
IMPORTANT NOTICE!!!!
This device can be configured to transmit on the 433 MHz frequency following the requirements
of 47 CFR 15.231. Failure to adhere to this requirement void’s the authority to operate the
equipment!
The developer configuring Gateway’s control signal for the user application is responsible for
ensuring compliance to FCC 15.231(a-d).
In the event where the specific application in which the installed Gateway will be used, will not
ensure that a control signal will always be sent as the purpose of the transmission, then the
installer must set the Gateway to only operate in 15.231(e) mode (i.e., “periodic operation”).
Document Number: 600840-000038
Page 7 of 9
Installation Manual
Rev: 1.2
Last Revised: 3/22/16
To set the device to transmit in FCC Part 15.231(e) mode, use the API command string as
indicated below in quotes (“ ”).
“iLPD433.send(“MyMessage”,9,
FCC_PERIODIC_15_231_E,suggestedRetryIntervalMS,100,actualSentPowerDBM);”
Otherwise in the above command, replace the argument “FCC_PERIODIC_15_231_E” with
“FCC_APERIODIC_15_231_AD” for 15.231(a-d) mode with the appropriate control message
setup.
4.
CONFIGURATION
With equipment installed, final configuration must meet the minimum separation distance in
Table 5 and Section 4.2.
4.1. GATEWAY SYSTEM SEPARATION DISTANCES
Antenna Hub 1, 2
(Recommended minimum
spacing between antenna
hubs is 7.5 cm)
Gateway
Operator
Gateway
40 cm (USA)
20 cm
60 cm (Canada)
20 cm
N/A
Table 5 Separation Distance
Document Number: 600840-000038
Page 8 of 9
Installation Manual
Rev: 1.2
Last Revised: 3/22/16
4.2. GATEWAY SYSTEM SEPARATION DISTANCE ILLUSTRATION
Gateway and the following components must follow the distances in the following illustration to
comply with FCC part 1.310.
40 cm (USA)
60 cm (Canada)
40 cm (USA)
60 cm (Canada)
Operator
20 cm
Antenna Hub 1
Antenna Hub 2
20 cm
20 cm
Gateway
Figure 1 Separation Distance
Document Number: 600840-000038
Page 9 of 9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Angela Lorenz
Creator                         : Microsoft® Word 2010
Create Date                     : 2016:03:29 08:36:39-05:00
Modify Date                     : 2016:03:29 08:36:39-05:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools