Apple A1476 Tablet Device User Manual iPad User Guide Draft v1 0 Part4

Download:
Mirror Download [FCC.gov]
Document ID	2198235
Application ID	0RenE95J8PQFES/W6wtV+w==
Document Description	iPad_User_Guide_Draft_v1.0_Part4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	341.75kB (4271910 bits)
Date Submitted	2014-02-23 00:00:00
Date Available	2014-08-22 00:00:00
Creation Date	2017-10-23 21:05:56
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-23 21:05:56
Document Title	iPad_User_Guide_Draft_v1.0_Part4
Document Creator	Adobe InDesign Server CS5.5 (7.5.3)
Document Author:	Apple Inc.

Apple Confidential
Turn of automatic downloads. Tap Apps in Automatic Downloads. Apps update automatically
over Wi-Fi, unless you turn of the option.
ra
ft
Download apps using the cellular network (Wi-Fi + cellular models).Turn on Use Cellular Data.
Downloading apps over the cellular network may incur carrier charges. Newsstand apps update
only over Wi-Fi.
Chapter 21 App Store
93
Apple Confidential
22
Newsstand
Newsstand at a glance
ft
Newsstand organizes your magazine and newspaper apps, and automatically updates them
when iPad is connected to Wi-Fi.
ra
Find Newsstand apps.
Touch and hold
a publication to
rearrange.
Find Newsstand apps. Tap Newsstand to reveal the shelf, then tap Store. When you purchase a
Newsstand app, it’s added to the shelf. After the app is downloaded, open it to view its issues
and subscription options. Subscriptions are In-App purchases, billed to your store account.
Turn of automatic updates. Apps update automatically over Wi-Fi, unless you turn of the option
in Settings > iTunes & App Store > Automatic Downloads.
94
Apple Confidential
23
Game Center
At a glance
Game Center lets you play your favorite games with friends who have an iOS device or a Mac
(OS X Mountain Lion or later). You must be connected to the Internet to use Game Center.
ft
WARNING: For important information about avoiding repetitive motion injuries, see Important
safety information on page 125.
See who’s the best.
Find someone to play against.
ra
Play, share,
or remove
this game.
Explore
game goals.
Declare your
status or change
your photo.
Is it your turn?
It’s on!
Choose a game.
Invite friends to play.
Get going. Open Game Center. If you see your nickname at the top of the screen, you’re already
signed in. Otherwise, you’ll be asked for your Apple ID and password.
Get some games. Tap Games, then tap a recommended game. Or browse for games in the App
Store (look for Supports Game Center in the game details). Or, get a game one of your friends
has; see Play with friends on page 96.
Play! Tap Games, choose a game, tap ••• in the upper right, then tap Play.
Sign out? No need to sign out when you quit Game Center, but if you want to, go to Settings >
Game Center and tap your Apple ID.
95
Apple Confidential
Play with friends
Invite friends to a multiplayer game. Tap Friends, choose a friend, choose a game, then tap
Play. If the game allows or requires additional players, choose additional players to invite, then
tap Next. Send your invitation, then wait for the others to accept. When everyone is ready, start
the game. If a friend isn’t available or doesn’t respond to your invitation, you can tap AutoMatch to have Game Center ind another player for you, or tap Invite Friend to try inviting some
other friend.
Send a friend request. Tap Friends, tap , then enter your friend’s email address or Game Center
nickname. To browse your contacts, tap . To add several friends in one request, type Return
after each address. Or, tap anyone on the Friends page under A-Z, Recent, or Points, or any player
you see anywhere in Game Center.
Challenge someone to outdo you. Tap one of your scores or achievements, then tap
Challenge Friends.
What are your friends playing and how are they doing? Tap Friends, tap your friend’s name,
then tap the Games or Points bubble.
ft
Want to purchase a game your friend has? Tap Friends, then tap your friend’s name. Tap their
Games bubble, tap the game in the list, then tap ••• in the upper right.
Make new friends. To see a list of your friend’s friends, tap Friends, tap your friend’s name, then
tap their Friends bubble.
Unfriend a friend. Tap Friends, tap the friend’s name, then tap ••• in the upper right.
ra
Keep your email address private. Turn of Public Proile in your Game Center account settings.
See “Game Center settings” below.
Turn of multiplayer activity or friend requests. Go to Settings > General > Restrictions and turn
of Multiplayer Games or Adding Friends. If the switches are grayed, tap Enable Restrictions at the
top irst.
Keep it friendly. To report ofensive or inappropriate behavior, tap Friends, tap the person’s name,
tap ••• in the upper right, then tap Report a Problem.
Game Center settings
Go to Settings > Game Center, where you can:
•
Sign out (tap your Apple ID)
•
Allow invites
•
Let nearby players ind you
•
Edit your Game Center proile (tap your nickname)
•
Get friend recommendations from Contacts or Facebook
Specify which notiications you want for Game Center. Go to Settings > Notiications > Game
Center. If Game Center doesn’t appear, turn on Notiications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Chapter 23 Game Center
96
Apple Confidential
24
iBooks
At a glance
iBooks is a great way to read and buy books. Download the free iBooks app from the App Store,
and then enjoy everything from classics to bestsellers.
ft
Add a
bookmark.
ra
Double-tap
to zoom.
Go to a different page.
To download the iBooks app and use the iBookstore, you need an Internet connection and an
Apple ID.
Visit the iBookstore. In iBooks, tap Store to:
•
Find books by browsing or searching
•
Get a sample of a book to see if you like it
•
Read and write reviews, and see current bestsellers
•
Tell a friend about a book via Facebook, Twitter, iMessage, or email
Purchase a book. Find one you want, tap the price, then tap again to get it.
Get information about a book. You can read a summary of the book, read reviews, and try a
sample of the book before buying it. After buying a book, you can write a review of your own.
97
Apple Confidential
Download a previous purchase. If you download a book you’ve previously purchased, you won’t
be charged again. To automatically download items purchased on other devices, go to Settings
> iTunes & App Store. For information about purchased books and iCloud, see Organizing the
bookshelf on page 100.
Update a book. If there’s an update to a book you’ve downloaded, a badge notiies you of the
new version. To see and download the updated book, tap Purchased, then tap Updates.
Reading books
Each book has a particular set of features, based on its contents and format. Some of the features
described below might not be available in the book you’re reading.
Open a book. Tap the book you want to read. If you don’t see it, swipe the shelf left or right to
see other collections.
•
Show the controls: Tap near the center of the page.
•
Enlarge an image: Double-tap the image. In some books, touch and hold to display a
magnifying glass you can use to view an image.
•
Go to a speciic page: Use the page navigation controls at the bottom of the screen. Or, tap
and enter a page number, then tap the page number in the search results.
ft
•
Look up a word: Double-tap a word, then tap Deine in the menu that appears. Deinitions
aren’t available for all languages.
View the table of contents: Tap
of contents.
. With some books, you can also pinch to see the the table
•
Add or remove a bookmark: Tap . Tap again to remove the bookmark. You don’t need to add
a bookmark when you close the book, because iBooks remembers where you left of. You can
have multiple bookmarks—to see them all, tap , then tap Bookmarks.
ra
•
Annotate a book. You can add notes and highlights to a book.
Add a highlight: Double-tap a word, use the grab points to adjust the selection, then tap
Highlight and choose a style.
•
Share highlighted text: Tap the highlighted text, then tap
is from the iBookstore, a link to the book is included.
•
Remove a highlight: Tap the highlighted text, then tap
•
or Share. If the book you’re reading
•
Add a note: Double-tap a word, then tap Note.
•
Remove a note: Delete its text. To remove the note and its highlight, tap the highlighted text,
then tap .
•
See all your notes: Tap the center of the screen to display the controls, tap
•
Delete notes: Tap the center of the screen to display the controls, tap , then tap Notes. Tap
then tap Edit Notes. Select the notes you want to delete, then tap Delete.
•
Share your notes: Tap the center of the screen to display the controls, tap , then tap Notes.
Tap , then tap Edit Notes. Select the notes you want to share, then tap Share.
•
Share a link to a book: Tap the center of the screen to display the controls, then tap
then tap Share Book.
, then tap Notes.
. Tap
Change a book’s appearance. Many books let you change the font, font size, and page color.
•
Change the font or font size: Tap the center of the screen to display the controls, then tap
Some books allow you to change the font size only when iPad is in portrait orientation.
Chapter 24 iBooks
98
Apple Confidential
•
Change the color of the page and text: Tap the center of the screen to display the controls, tap
, then tap Themes and choose White, Sepia, or Night. This setting applies to all books that
support it.
•
Change how pages are displayed: Tap the center of the screen to display the controls, tap
then tap Themes and choose Book, Full Screen, or Scroll.
•
Change the brightness: Tap the center of the screen to display the controls, then tap
don’t see , tap
irst.
•
. If you
Turn justiication and hyphenation on or of: Go to Settings > iBooks. PDFs and some books
can’t be justiied or hyphenated.
Interacting with multimedia
Some books have interactive elements, such as movies, diagrams, presentations, galleries, 3D
objects, and chapter reviews. To interact with a multimedia object, tap, swipe, or pinch it. For
example, with a presentation, you can tap to start it, then tap to see each screen. To view an
element full-screen, spread two ingers apart. When you inish, pinch to close it.
ft
Studying notes and vocabulary lists
In books that support it, you can use notes view to review all of your highlights and notes
as cards.
View your notes. Tap
•
View notes by chapter: Tap a chapter to see its notes. Badges in the chapter list indicate the
number of notes and highlights you’ve added to each chapter. If you don’t see the chapter list,
tap the Chapter button.
ra
•
. You can also:
Search all notes: Enter a word or phrase in the search ield. If you don’t see the search ield, tap
the Chapters button. Tap a chapter to see its notes.
•
Review notes and vocabulary as study cards: Tap Study Cards. Swipe to move between cards. If
a card has notes, indicated by , tap the card to turn it over. Tap to select which highlights
are displayed, or to shule the cards. If the chapter includes a vocabulary list, you can also
include it in your cards.
•
Email your notes: Tap
. Select the notes that you want to delete, then tap Delete.
Delete notes: Tap
. Select the notes that you want to share, then tap Email.
•
Chapter 24 iBooks
99
Apple Confidential
Organizing the bookshelf
Use the bookshelf to browse your books and PDFs. You can also organize items in collections.
Available on the iBookstore. Title availability is subject to change.
ft
Touch and hold a
book to rearrange.
Move a book or PDF to a collection. Go to the bookshelf and tap Edit. Select the items you want
to move, then tap Move and select a collection.
ra
View and manage collections. Tap Collections. To edit the name of a collection, tap Edit. You
can’t edit or remove the built-in collections.
Sort the bookshelf. Tap
, then select a sort method at the bottom of the screen.
Delete items from the bookshelf. Tap Edit, then tap each item that you want to delete, so that a
checkmark appears. Tap Delete, then tap Done.
•
Delete this copy: Removes the item from iPad, but it still appears on the bookshelf and can be
downloaded again.
•
Delete from all devices: Removes the item from all of your iOS devices and from the bookshelf.
You can download it again from Purchases in the iBookstore. See At a glance on page 97.
Search for a book. Go to the bookshelf. Tap the status bar to scroll to the top of the screen, then
tap . Searching looks for the title and the author’s name.
Download a book from iCloud: Books you’ve purchased that aren’t on iPad appear with an
iCloud badge. To download the book, tap its cover. To automatically download items purchased
on other devices, go to Settings > iTunes & App Store.
•
Hide purchases on the bookshelf: To show or hide purchased books that aren’t on iPad, go to
Settings > iBooks > Show All Purchases. You can download purchases from the iBookstore. See
At a glance on page 97.
Syncing books and PDFs
Use iTunes to sync your books and PDFs between iPad and your computer, and to buy books
from the iTunes Store. When iPad is connected to your computer, the Books pane lets you select
which items to sync. You can also ind DRM-free ePub books and PDFs on the web and add them
to your iTunes library.
Chapter 24 iBooks
100
Apple Confidential
Sync a book or PDF to iPad. In iTunes on your computer, choose File > Add to Library and select
the ile. Then sync.
Add a book or PDF to iBooks without syncing. If the book or PDF isn’t too large, email it
to yourself from your computer. Open the email message on iPad, then touch and hold the
attachment and choose “Open in iBooks.”
Printing or emailing a PDF
You can use iBooks to email a copy of a PDF, or to print all or part of the PDF to an
AirPrint printer.
Email a PDF. Open the PDF, tap
Print a PDF. Open the PDF, tap
page 30.
, then choose Email.
, then choose Print. For more information, see AirPrint on
iBooks settings
ft
iBooks stores your purchases, collections, bookmarks, notes, and current page information in
iCloud, so you can read books seamlessly across all your iOS devices. iBooks saves information
about all of your books when you open or quit the app. Information about individual books is
also saved when you open or close the book.
Turn syncing on or of. Go to Settings > iBooks. You can sync bookmarks and collections.
ra
Some books might access video or audio that’s stored on the web. If iPad has a cellular data
connection, playing these iles may incur carrier charges.
Turn online content access on or of. Go to Settings > iBooks > Online Content.
Change the direction the page turns when you tap the left margin. Go to Settings > iBooks >
Both Margins Advance.
Chapter 24 iBooks
101
Apple Confidential
25
Podcasts
Download the free Podcasts app from the App Store, then browse, subscribe to, and play your
favorite podcasts on iPad.
Delete a podcast.
See the playback controls.
ft
Tap a
podcast to
view available
episodes.
Browse all
available
podcasts.
ra
Scroll to see
your entire
library.
View the
podcasts in
your Library.
Browse and
preview the most
popular episode.
Get podcasts:
Browse the full catalog: Tap Catalog, then tap any podcast that interests you.
•
•
Browse the most popular podcasts: Tap Top Stations (if you don’t see it, tap Library irst). Swipe
left or right to change the category, or swipe up or down to browse the current category. Tap
a podcast to preview the latest episode, or tap
to see a list of episodes.
•
Stream an episode: Tap any episode.
•
Download an episode so you can listen to it when you’re not connected to Wi-Fi: Tap the
download button next to any episode.
•
Subscribe to a podcast to always get the latest episode: If you’re browsing the catalog, tap
a podcast to see the list of episodes, then tap Subscribe. If you’ve already downloaded an
episode, tap the podcast in your library, tap , then turn on Subscription.
•
Automatically get the latest episode of a subscribed podcast: Tap the podcast in your library, tap
, then turn on Auto-Download. If you don’t see the Auto-Download switch, make sure you’ve
turned on Subscription irst.
102
Apple Confidential
Control audio playback: To see all of the playback controls, swipe the artwork upward.
Drag the playhead
to jump to another
part of the podcast.
Swipe up or down
to show or hide the
controls.
Share
this podcast.
Set the
sleep timer.
Adjust
playback
speed.
Skip forward
30 seconds.
Replay the last
10 seconds.
Skip to next
episode.
ft
Play previous
episode.
ra
Control video playback: Tap the screen while you’re watching a video podcast.
Chapter 25 Podcasts
103
A
Accessibility
Accessibility features
VoiceOver
•
Support for braille displays
•
Siri
•
Zoom
•
Invert Colors
•
Speak Selection
•
Speak Auto-Text
•
Large and bold text
•
Reduced screen motion
•
On/of switch labels
•
Subtitles and closed captions
•
Mono audio and balance
•
Assignable tones
•
Guided Access
•
Switch Control
•
AssistiveTouch
•
Widescreen keyboards
ra
•
ft
iPad incorporates these accessibility features:
Turn on accessibility features. Go to Settings > General > Accessibility, or use the Accessibility
Shortcut. See Accessibility Shortcutbelow.
Control accessibility using iTunes. Connect iPad to your computer and select iPad in the
iTunes device list. Click Summary, then click Conigure Universal Access at the bottom of the
Summary screen.
For more information about the iPad accessibility features, go to www.apple.com/accessibility.
Accessibility Shortcut
Choose the features you want to control. Go to Settings > General > Accessibility > Accessibility
Shortcut and select the accessibility features you use.
Use the Accessibility Shortcut. Press the Home button quickly three times to turn any of these
features on or of:
•
VoiceOver
•
Zoom
•
Invert Colors
104
Appendix
Apple Confidential
Apple Confidential
•
Guided Access (The shortcut starts Guided Access if it’s already turned on. See Guided
Access on page 117.)
•
Switch Control
•
AssistiveTouch
Not so fast. To slow down the triple-click speed, go to Settings > General > Accessibility >
Home-click Speed.
VoiceOver
VoiceOver describes aloud what appears onscreen, so you can use iPad without seeing it.
VoiceOver tells you about each item on the screen as you select it. The VoiceOver cursor (a black
rectangle) encloses the item and VoiceOver speaks its name or describes it.
Touch the screen or drag your inger over it to hear the items on the screen. When you select
text, VoiceOver reads the text. If you turn on Speak Hints, VoiceOver may tell you the name of the
item and provide instructions—for example, “double-tap to open.” To interact with items, such as
buttons and links, use the gestures described in Learn VoiceOver gestures on page 107.
ft
When you go to a new screen, VoiceOver plays a sound, then selects and speaks the irst item
on the screen (typically in the upper-left corner). VoiceOver also lets you know when the display
changes to landscape or portrait orientation, and when the screen becomes locked or unlocked.
ra
Note: VoiceOver speaks in the language speciied in International settings, which may be
inluenced by the Region Format setting in Settings > General > International. VoiceOver is
available in many languages, but not all.
VoiceOver basics
Important: VoiceOver changes the gestures you use to control iPad. When VoiceOver is on, you
must use VoiceOver gestures—even to turn VoiceOver of.
Turn VoiceOver on or of. Go to Settings > General > Accessibility > VoiceOver, or use the
Accessibility Shortcut. See Accessibility Shortcut on page 104.
Explore. Drag your inger over the screen. VoiceOver speaks each item you touch. Lift your inger
to leave an item selected.
•
•
•
•
•
•
•
Select an item: Tap it, or lift your inger while dragging over it.
Select the next or previous item: Swipe right or left with one inger. Item order is left-to-right,
top-to-bottom.
Select the item above or below: Set the rotor to Vertical Navigation, then swipe up or down with
one inger. For more about the rotor, see Use the VoiceOver rotor.
Select the irst or last item on the screen: Swipe up or down with four ingers.
Select an item by name: Triple-tap with two ingers anywhere on the screen to open the Item
Chooser. Then type a name in the search ield, or swipe right or left to move through the list
alphabetically, or tap the table index to the right of the list and swipe up or down to move
quickly through the list of items.
Change an item’s name so it’s easier to ind: Select the item, then double-tap and hold with two
ingers anywhere on the screen.
Speak the text of the selected item: Set the rotor control to characters or words, then swipe
down or up with one inger.
Appendix A Accessibility
105
Apple Confidential
•
•
Turn spoken hints on or of: Go to Settings > General > Accessibility > VoiceOver > Speak Hints.
Use phonetic spelling: Go to Settings > General > Accessibility > VoiceOver >
Phonetic Feedback.
•
Speak the entire screen from the top: Swipe up with two ingers.
•
Speak from the current item to the bottom of the screen: Swipe down with two ingers.
•
•
•
Pause speaking: Tap once with two ingers. Tap again with two ingers to resume. Speaking
resumes when you select another item.
Mute VoiceOver: Double-tap with three ingers. Double-tap again with three ingers to unmute.
If you’re using an external keyboard, you can press the Control key on the keyboard to mute or
unmute VoiceOver.
Silence sound efects: Turn of Settings > General > Accessibility > VoiceOver > Use
Sound Efects.
Use a larger VoiceOver cursor. Turn on Settings > General > Accessibility > VoiceOver >
Large Cursor.
Adjust the speaking voice. You can adjust the characteristics of the VoiceOver speaking voice to
make it easier for you to understand:
Change the speaking volume: Use the volume buttons on iPad. You can also add volume to the
rotor and swipe up and down to adjust; see Use the VoiceOver rotor on page 109.
•
Change the speaking rate: Go to Settings > General > Accessibility > VoiceOver and drag
the Speaking Rate slider. You can also add Speech Rate to the rotor, then swipe up or down
to adjust.
Use pitch change: VoiceOver uses a higher pitch when speaking the irst item of a group (such
as a list or table) and a lower pitch when speaking the last item of a group. Go to Settings >
General > Accessibility > VoiceOver > Use Pitch Change.
ra
•
ft
•
Speak punctuation: Set the rotor to Punctuation, then swipe up or down to to select how
much you want to hear.
•
Change the language for iPad: Go to Settings > General > International > Language. VoiceOver
pronunciation of some languages is afected by Settings > General > International >
Region Format.
•
Change pronunciation: Set the rotor to Language, then swipe up or down. Language is
available in the rotor only if you select more than one pronunciation at Settings > General >
Accessibility > VoiceOver > Languages & Dialects.
•
•
Choose which pronunciations are available in the rotor: Go to Settings > General > Accessibility
> VoiceOver > Languages & Dialects. To adjust the voice quality or speaking rate for each
language, tap
next to the language. To change the order of the languages, drag
up or
down. To delete a language, tap Edit.
•
Set the default dialect for the current iPad language: Go to Settings > General > Accessibility >
VoiceOver > Languages & Dialects.
•
Change the basic reading voice: Go to Settings > General > Accessibility > VoiceOver > Use
Compact Voice.
Use iPad with VoiceOver
Unlock iPad. Press either the Home button or the Sleep/Wake button, swipe to select the Unlock
slide, then double-tap the screen.
Enter your passcode silently. To avoid having your passcode spoken as you enter it, use
handwriting to enter it; see Write with your inger on page 110.
Appendix A Accessibility
106
Apple Confidential
Open an app, toggle a switch, or “tap” an item. Select the item, then double-tap the screen.
Double-tap the selected item. Triple-tap the screen.
Adjust a slider. Select the slider, then swipe up or down with one inger.
Use a standard gesture. Double-tap and hold your inger on the screen until you hear three
rising tones, then make the gesture. When you lift your inger, VoiceOver gestures resume.
Scroll a list or area of the screen. Swipe up or down with three ingers.
•
Scroll continuously through a list: Double-tap and hold until you hear three rising tones, then
drag up or down.
•
Use the list index: Some lists have an alphabetical index along the right side. The index can’t
be selected by swiping between items; you must touch the index directly to select it. With the
index selected, swipe up or down to move through the index. You can also double-tap, then
slide your inger up or down.
•
Reorder a list: You can change the order of items in some lists, such as the Rotor items in
Accessibility settings. Select
to the right side of an item, double-tap and hold until you
hear three rising tones, then drag up or down.
ft
Open Notiication Center. Select any item in the status bar, then swipe down with three ingers.
To dismiss, do a two-inger scrub (move two ingers back and forth three times quickly, making a
“z”).
Open Control Center. Select any item in the status bar, then swipe up with three ingers. To
dismiss Control Center, do a two-inger scrub.
ra
Switch apps. Press the Home button twice to see what’s running, then swipe left or right with
one inger to select and tap to open. You can also set the rotor to Actions while viewing open
apps and swipe up or down.
Rearrange your Home screen. On the Home screen, select the icon you want to move. Doubletap and hold the icon, then drag it. VoiceOver speaks the row and column position as you drag
the icon. Release the icon when it’s in the location you want. You can drag additional icons. Drag
an item to the left or right edge of the screen to move it to a diferent page of the Home screen.
When you inish, press the Home button.
Speak iPad status information. Tap the status bar at the top of the screen, then swipe left or
right to hear information about the time, battery state, Wi-Fi signal strength, and more.
Speak notiications. Go to Settings > General > Accessibility > VoiceOver and turn on Speak
Notiications. Notiications, including the text of incoming text messages, are spoken as they
occur, even if iPad is locked. Unacknowledged notiications are repeated when you unlock iPad.
Turn the screen curtain on or of. Triple-tap with three ingers. When the screen curtain is on, the
screen contents are active even though the display is turned of.
Learn VoiceOver gestures
When VoiceOver is on, standard touchscreen gestures have diferent efects, and additional
gestures let you move around the screen and control individual items. VoiceOver gestures
include two-, three-, and four-inger taps and swipes. For best results using multi-inger gestures,
relax and let your ingers touch the screen with some space between them.
Appendix A Accessibility
107
Apple Confidential
You can use diferent techniques to enter VoiceOver gestures. For example, you can enter a twoinger tap using two ingers from one hand, or one inger from each hand. You can even use
your thumbs. Many use a split-tap gesture: instead of selecting an item and double-tapping,
touch and hold an item with one inger, then tap the screen with another inger. Try diferent
techniques to discover which works best for you.
Try diferent techniques to discover what works best for you. If a gesture doesn’t work, try a
quicker movement, especially for a double-tap or swipe gesture. To swipe, try brushing the
screen quickly with your inger or ingers.
Practice VoiceOver gestures. Go to Settings > General > Accessibility > VoiceOver, then tap
VoiceOver Practice. When you inish practicing, tap Done. If you don’t see the VoiceOver Practice
button, make sure VoiceOver is turned on.
Here’s a summary of key VoiceOver gestures:
Navigate and read
Tap: Select and speak the item.
•
Swipe right or left: Select the next or previous item.
•
Swipe up or down: Depends on the rotor setting. See Use the VoiceOver rotor on page 109.
•
Two-inger tap: Stop speaking the current item.
•
Two-inger swipe up: Read all from the top of the screen.
•
Two-inger swipe down: Read all from the current position.
•
•
•
Two-inger “scrub”: Move two ingers back and forth three times quickly (making a “z”) to
dismiss an alert or go back to the previous screen.
ra
•
ft
•
Three-inger swipe up or down: Scroll one page at a time.
Three-inger swipe right or left: Go to the next or previous page (such as the Home screen or
Stocks).
Three-inger tap: Speak additional information, such as position within a list or whether text
is selected.
•
Four-inger tap at top of screen: Select the irst item on the page.
•
Four-inger tap at bottom of screen: Select the last item on the page.
Activate
Double-tap: Activate the selected item.
•
•
Triple-tap: Double-tap an item.
•
Split-tap: As an alternative to selecting an item and double-tapping to activate it, touch and
hold an item with one inger, and then tap the screen with another.
•
Double-tap and hold (1 second) + standard gesture: Use a standard gesture. The double-tap and
hold gesture tells iPad to interpret the next gesture as standard. For example, you can doubletap and hold, and then without lifting your inger, drag your inger to slide a switch.
•
Two-inger double-tap: Play or pause in Music, Videos, or Photos. Take a photo in Camera. Start
or pause recording in Camera. Start or stop the stopwatch.
•
Two-inger double-tap and hold: Relabel the selected item.
•
Two-inger triple-tap: Open the Item Chooser.
•
Three-inger double-tap: Mute or unmute VoiceOver.
•
Three-inger triple-tap: Turn the screen curtain on or of.
Appendix A Accessibility
108
Apple Confidential
Use the VoiceOver rotor
Use the rotor to choose what happens when you swipe up or down with VoiceOver turned on.
Operate the rotor. Rotate two ingers on the iPad screen around a point between them.
Change the options included in the rotor. Go to Settings > General > Accessibility > VoiceOver
> Rotor, then select the options you want to be available in the rotor.
The available rotor positions and their efects depend on what you’re doing. For example, if
you’re reading an email, you can use the rotor to switch between hearing text spoken word-byword or character-by-character when you swipe up or down. If you’re browsing a webpage, you
can set the rotor to speak all the text (either word-by-word or character-by-character), or to jump
from one item to another of a certain type, such as headers or links.
Use the onscreen keyboard
ft
When you use an Apple Wireless Keyboard to control VoiceOver, the rotor lets you adjust settings
such as volume, speech rate, use of pitch or phonetics, typing echo, and reading of punctuation.
See Use VoiceOver with an Apple Wireless Keyboard on page 112.
ra
When you activate an editable text ield, the onscreen keyboard appears (unless you have an
Apple Wireless Keyboard attached).
Activate a text ield. Select the text ield, then double-tap. The insertion point and the onscreen
keyboard appear.
Enter text. Type characters using the onscreen keyboard:
•
Touch typing: Touch a key on the keyboard to select it, then lift your inger to enter the
character. If you touch the wrong key, slide your inger to the key you want. VoiceOver
speaks the character for each key as you touch it, but doesn’t enter a character until you lift
your inger.
•
Standard typing: Select a key on the keyboard by swiping left or right, then double-tap to
enter the character. Or move your inger around the keyboard to select a key and, while
continuing to touch the key with one inger, tap the screen with another inger. VoiceOver
speaks the key when it’s selected, and again when the character is entered.
•
Choose standard or touch typing: With VoiceOver turned on and a key selected on the
keyboard, use the rotor to select Typing Mode, then swipe up or down.
Move the insertion point. Swipe up or down to move the insertion point forward or backward in
the text. Use the rotor to choose whether you want to move the insertion point by character, by
word, or by line.
VoiceOver makes a sound when the insertion point moves, and speaks the character, word, or
line that the insertion point moves across. When moving forward by words, the insertion point
is placed at the end of each word, before the space or punctuation that follows. When moving
backward, the insertion point is placed at the end of the preceding word, before the space or
punctuation that follows it.
Move the insertion point past the punctuation at the end of a word or sentence. Use the rotor
to switch back to character mode.
Appendix A Accessibility
109
Apple Confidential
When moving the insertion point by line, VoiceOver speaks each line as you move across it.
When moving forward, the insertion point is placed at the beginning of the next line (except
when you reach the last line of a paragraph, when the insertion point is moved to the end of the
line just spoken). When moving backward, the insertion point is placed at the beginning of the
line that’s spoken.
Change typing feedback. Go to Settings > General > Accessibility > VoiceOver >
Typing Feedback.
Use phonetics in typing feedback. Go to Settings > General > Accessibility > VoiceOver >
Phonetic Feedback. Text is read character by character. VoiceOver irst speaks the character, then
its phonetic equivalent—for example, “f” and then “foxtrot.”
Delete a character. Select
, then double-tap or split-tap. You must do this even when touch
typing. To delete multiple characters, touch and hold the Delete key, then tap the screen with
another inger once for each character you want to delete. VoiceOver speaks the character as it’s
deleted. If Use Pitch Change is turned on, VoiceOver speaks deleted characters in a lower pitch.
ft
Select text. Set the rotor to Edit, swipe up or down to choose Select or Select All, then double
tap. If you chose Select, the word closest to the insertion point is selected when you double-tap.
If you chose Select All, all text is selected. Pinch to increase or decrease the selection.
Cut, copy, or paste. Make sure the rotor is set to Edit. Select the text, swipe up or down to choose
Cut, Copy, or Paste, then double-tap.
Undo. Shake iPad, swipe left or right to choose the action to undo, then double-tap.
ra
Enter an accented character. In standard typing mode, select the plain character, then doubletap and hold until you hear a sound indicating alternate characters have appeared. Drag left or
right to select and hear the choices. Release your inger to enter the current selection.
Change the keyboard language. Set the rotor to Language, then swipe up or down. Choose
“default language” to use the language speciied in International settings. The Language rotor
item appears only if you select more than one language in Settings > General > Accessibility >
VoiceOver > Language Rotor.
Write with your inger
Enter handwriting mode. Use the rotor to select Handwriting. If Handwriting isn’t in the rotor, go
to Settings > General > Accessibility > VoiceOver > Rotor and add it.
Choose a character type. Swipe up or down with three ingers to choose lowercase, numbers,
uppercase, or punctuation.
Hear the currently selected character type. Tap with three ingers.
Enter a character. Trace the character on the screen with your inger.
Enter a space. Swipe right with two ingers.
Go to a new line. Swipe left with three ingers.
Delete the character before the insertion point. Swipe left with two ingers.
Select an item on the Home screen. Start writing the name of the item. If there are multiple
matches, continue to spell the name until it is unique, or swipe up or down with two ingers to
select a match candidate.
Enter your passcode silently. Set the rotor to Handwriting on the passcode screen, then write
the characters of your passcode.
Skip to a letter in a table index. Select the index to the right of the table, then write the letter.
Appendix A Accessibility
110
Apple Confidential
Set the rotor to a web browsing element type. Write the irst letter of a page element type. For
example, write “l” to have up or down swipes skip to links, or “h” to skip to headings.
Exit handwriting mode. Turn the rotor to a diferent selection.
Read math equations
VoiceOver can read aloud math equations encoded using:
•
MathML on the web
•
MathML or LaTeX in iBooks Author
Hear an equation. Have VoiceOver read the text as usual. VoiceOver says “math” before it starts
reading an equation.
Explore the equation. Double tap the selected equation to display it full screen and move
through it one element at a time. Swipe left or right to read elements of the equation. Use the
rotor to select Symbols, Small Expressions, Medium Expressions, or Large Expressions, then swipe
up or down to hear the next element of that size. You can continue to double-tap the selected
element to “drill down” into the equation to focus on the selected element, then swipe left or
right, up or down to read one part at a time.
Using VoiceOver with Safari
ft
Equations read by VoiceOver can also be output to a braille device using Nemeth code, as well
as the codes used by Uniied English Braille, British English, French, and Greek. See Support for
braille displays on page 114.
ra
Search the web. Select the search ield, enter your search, then swipe right or left to move down
or up the list of suggested search phrases. Then double-tap the screen to search the web using
the selected phrase.
Skip to the next page element of a particular type. Set the rotor to the element type, then
swipe up or down.
Set the rotor options for web browsing. Go to Settings > General > Accessibility > VoiceOver >
Rotor. Tap to select or deselect options, or drag
up to reposition an item.
Skip images while navigating. Go to Settings > General > Accessibility > VoiceOver > Navigate
Images. You can choose to skip all images or only those without descriptions.
Reduce page clutter for easier reading and navigation. Select the Reader item in the Safari
address ield (not available for all pages).
If you pair an Apple Wireless Keyboard with iPad, you can use single-key Quick Nav commands to
navigate webpages. See Use VoiceOver with an Apple Wireless Keyboard on page 112.
Use VoiceOver with Maps
With VoiceOver, you can zoom in or out, select a pin, or get information about a location.
Explore the map. Drag your inger around the screen, or swipe left or right to move to
another item.
Zoom in or out. Select the map, set the rotor to Zoom, then swipe up or down with one inger.
Pan the map. Swipe with three ingers.
Browse visible points of interest. Set the rotor to Points of Interest, then swipe up or down with
one inger.
Appendix A Accessibility
111
Apple Confidential
Follow a road. Hold your inger down on the road, wait until you hear “pause to follow,” then
move your inger along the road while listening to the guide tone. The pitch increases when you
stray from the road.
Select a pin. Touch a pin, or swipe left or right to select the pin.
Get information about a location. With a pin selected, double-tap to display the information
lag. Swipe left or right to select the More Info button, then double-tap to display the
information page.
Edit videos with VoiceOver
You can use VoiceOver gestures to trim Camera videos.
Trim a video. While viewing a video, double-tap the screen to display the video controls. Select
the beginning or end of the trim tool. Then swipe up to drag to the right, or swipe down to
drag to the left. VoiceOver announces the amount of time the current position will trim from the
recording. To complete the trim, select Trim and double-tap.
Use VoiceOver with an Apple Wireless Keyboard
ft
You can control VoiceOver using an Apple Wireless Keyboard paired with iPad. See Bluetooth
devices on page 31.
Use VoiceOver keyboard commands to navigate the screen, select items, read screen contents,
adjust the rotor, and perform other VoiceOver actions. Most commands use the Control-Option
key combination, abbreviated in the table that follow as “VO.”
ra
You can use VoiceOver Help to learn the keyboard layout and the actions associated with various
key combinations. VoiceOver Help speaks keys and keyboard commands as you type them,
without performing the associated action.
VoiceOver keyboard commands
VO = Control-Option
•
Turn on VoiceOver help: VO–K
•
Turn of VoiceOver help: Escape
•
Select the next or previous item: VO–Right Arrow or VO–Left Arrow
•
Double-tap to activate the selected item: VO–Space bar
Press the Home button: VO–H
•
Move to the status bar: VO–M
•
Read from the current position: VO–A
•
Read from the top: VO–B
•
Pause or resume reading: Control
•
Mute or unmute VoiceOver: VO–S
•
Open Notiication Center: Fn–VO–Up Arrow
•
Open Control Center: Fn–VO–Down Arrow
•
Open the Item Chooser: VO–I
•
Double-tap with two ingers: VO–”-”
•
Adjust the rotor: Use Quick Nav (see below)
•
Swipe up or down: VO–Up Arrow or VO–Down Arrow
•
Adjust the speech rotor: VO–Command–Left Arrow or VO–Command–Right Arrow
•
Appendix A Accessibility
112
Apple Confidential
•
Adjust the setting speciied by the speech rotor: VO–Command–Up Arrow or VO–Command–
Down Arrow
•
Turn the screen curtain on or of: VO–Shift–S
•
Return to the previous screen: Escape
•
Switch apps: Command–Tab or Command–Shift–Tab
Quick Nav
Turn on Quick Nav to control VoiceOver using the arrow keys.
•
Turn Quick Nav on or of: Left Arrow–Right Arrow
•
Select the next or previous item: Right Arrow or Left Arrow
•
Select the next or previous item speciied by the rotor: Up Arrow or Down Arrow
•
Select the irst or last item: Control–Up Arrow or Control–Down Arrow
•
Tap an item: Up Arrow–Down Arrow
•
Scroll up, down, left, or right: Option–Up Arrow, Option–Down Arrow, Option–Left Arrow, or
Option–Right Arrow
•
Adjust the rotor: Up Arrow–Left Arrow or Up Arrow–Right Arrow
Heading: H
•
Link: L
•
Text ield: R
•
Button: B
•
Form control: C
•
Image: I
•
Table: T
•
Static text: S
•
ARIA landmark: W
•
List: X
•
Item of the same type: M
•
Level 1 heading: 1
•
Level 2 heading: 2
•
Level 3 heading: 3
•
Level 4 heading: 4
•
Level 5 heading: 5
•
Level 6 heading: 6
ra
•
ft
Single-letter Quick Nav for the web
When you view a webpage with Quick Nav enabled, you can use the following keys on the
keyboard to navigate the page quickly. Typing the key moves to the next item of the indicated
type. To move to the previous item, hold the Shift key as you type the letter.
Text editing
Use these commands (with Quick Nav turned of) to work with text. VoiceOver reads the text as
you move the insertion point.
•
Go forward or back one character: Right Arrow or Left Arrow
•
Go forward or back one word: Option–Right Arrow or Option–Left Arrow
•
Go up or down one line: Up Arrow or Down Arrow
Appendix A Accessibility
113
Apple Confidential
•
Go to the beginning or end of the line: Command–Left Arrow or Command–Down Arrow
•
Go to the beginning or end of the paragraph: Option–Up Arrow or Option–Down Arrow
•
Go to the previous or next paragraph: Option–Up Arrow or Option–Down Arrow
•
Go to the top or bottom of the text ield: Command–Up Arrow or Command–Down Arrow
•
Select text as you move: Shift + any of the insertion point movement commands above
•
Select all text: Command–A
•
Copy, cut, or paste the selected text: Command–C, Command–X, or Command–V
•
Undo or redo last change: Command–Z or Shift–Command–Z
Support for braille displays
You can use a Bluetooth braille display to read VoiceOver output, and you can use a braille
display with input keys and other controls to control iPad when VoiceOver is turned on. For a list
of supported braille displays, go to www.apple.com/accessibility/iphone/braille-display.html.
Connect a braille display. Turn on the display, then go to Settings > General > Bluetooth and
turn on Bluetooth. Then go to Settings > General > Accessibility > VoiceOver > Braille and
choose the display.
ft
Adjust Braille settings. Go to Settings > General > Accessibility > VoiceOver > Braille, where you
can:
Turn on contracted braille
•
Turn of automatic braille translation
•
Turn of eight-dot braille
•
Turn on the status cell and choose its location
•
Turn on Nemeth code for equations
•
Display the onscreen keyboard
•
Change the braille translation from Uniied English
ra
•
For information about common braille commands for VoiceOver navigation, and for information
speciic to certain displays, go to support.apple.com/kb/HT4400.
The braille display uses the language that’s set for Voice Control. This is normally the language
that’s set for iPad in Settings > International > Language. You can use the VoiceOver language
setting to set a diferent language for VoiceOver and braille displays.
Set the language for VoiceOver. Go to Settings > General > International > Voice Control.
If you change the language for iPad, you may need to reset the language for VoiceOver and your
braille display.
You can set the leftmost or rightmost cell of your braille display to provide system status and
other information:
•
Announcement History contains an unread message
•
The current Announcement History message hasn’t been read
•
VoiceOver speech is muted
•
The iPad battery is low (less than 20% charge)
•
iPad is in landscape orientation
•
The screen display is turned of
•
The current line contains additional text to the left
Appendix A Accessibility
114
Apple Confidential
•
The current line contains additional text to the right
Set the leftmost or rightmost cell to display status information. Go to Settings > General >
Accessibility > VoiceOver > Braille > Status Cell, then tap Left or Right.
See an expanded description of the status cell. On your braille display, press the status cell’s
router button.
Siri
With Siri, you can do things with your iPad, such as opening apps, just by asking, and VoiceOver
can read Siri responses to you. For information, see Using Siri on page 36.
Zoom
Many apps let you zoom in or out on speciic items. For example, you can double-tap or pinch
to expand webpage columns in Safari. But, there’s also a Zoom feature that lets you magnify the
entire screen, no matter what you’re doing. And, you can use Zoom together with VoiceOver.
ft
Turn Zoom on or of. Go to Settings > General > Accessibility > Zoom. Or, use Triple-click Home.
See Accessibility Shortcut on page 104.
Zoom in or out. Double-tap the screen with three ingers.
ra
Vary the magniication. With three ingers, tap and drag up or down. The tap-and-drag gesture is
similar to a double-tap, except you don’t lift your ingers on the second tap—instead, drag your
ingers on the screen. Once you start dragging, you can drag with a single inger. iPad returns to
the adjusted magniication when you zoom out and in again using the three-inger double-tap.
Pan around the screen. While zoomed in, drag the screen with three ingers. Once you start
dragging, you can continue with just one inger. Or, hold a single inger near the edge of the
display to pan to that side. Move your inger closer to the edge to pan more quickly. When you
open a new screen, Zoom goes to the top-middle of the screen.
While using Zoom with an Apple Wireless Keyboard, the screen image follows the insertion point,
keeping it in the center of the display. See Use an Apple Wireless Keyboard on page 24.
Invert Colors
Sometimes, inverting the colors on the iPad screen may make it easier to read. When Invert
Colors is turned on, the screen looks like a photographic negative.
Invert the screen’s colors. Go to Settings > General > Accessibility > Invert Colors.
Speak Selection
Even with VoiceOver turned of, you can have iPad read aloud any text you select.
Turn on Speak Selection. Go to Settings > General > Accessibility > Speak Selection. There you
can also:
•
Adjust the speaking rate
•
Choose to have individual words highlighted as they’re read
Have text read to you. Select the text, then tap Speak.
Appendix A Accessibility
115
Apple Confidential
Speak Auto-Text
Speak Auto-text speaks the text corrections and suggestions iPad makes when you type.
Turn Speak Auto-text on or of. Go to Settings > General > Accessibility > Speak Auto-text.
Speak Auto-text also works with VoiceOver and Zoom.
Large and bold text
Display larger text in alerts, and in apps such as Calendar, Contacts, Mail, Messages, and Notes.
Go to Settings > General > Accessibility > Larger Type, where you can turn on Larger Dynamic
Type and adjust the font size.
Display bolder text for all items on iPad. Go to Settings > General > Accessibility and turn on
Bold Text.
Increase text contrast on diicult backgrounds when possible. Go to Settings > General >
Accessibility and turn on Increase Contrast.
ft
Reduced screen motion
You can stop the movement of some screen elements, such as the parallax of the wallpaper
behind home screen icons.
Reduce interface motion. Go to Settings > General > Accessibility and turn on Reduce Motion.
ra
On/of switch labels
To make it easier to see whether a setting is on or of, you can have iPad show an additional label
on on/of switches.
Add switch setting labels. Go to Settings > General > Accessibility and turn on On/Of Labels.
Subtitles and closed captions
The Videos app includes an Alternate Track button
you can tap to choose subtitles and
captions ofered by the video you’re watching. Standard subtitles and captions are usually listed,
but if you prefer special accessible captions, such as subtitles for the deaf and hard of hearing
(SDH), you can set iPad to list them instead when they’re available.
Prefer accessible subtitles and closed captions for the hard of hearing in the list of available
subtitles and captions. Turn on Settings > General > Accessibility > Subtitles & Captioning >
Closed Captions + SDH. This also turns on subtitles and captions in the Videos app.
Choose from available subtitles and captions. Tap
while watching a video in Videos.
Customize your subtitles and captions. Go to Settings > General > Accessibility > Subtitles &
Captioning > Style, where you can choose an existing caption style or create a new style based
on your choice of:
•
Font, size, and color
•
Background color and opacity
•
Text opacity, edge style, and highlight
Not all video content includes closed captions.
Appendix A Accessibility
116
Apple Confidential
Mono audio and balance
Mono Audio combines the sound from the left and right channels into a mono signal played on
through both channels. This way you can hear everything with either ear, or through both ears
with one set louder.
Turn Mono Audio on or of and adjust the balance. Go to Settings > General > Accessibility >
Mono Audio.
Assignable tones
You can assign distinctive ringtones to people in your contacts list for audible FaceTime caller
ID. You can also assign distinct tones to alert you of a variety of other events, including new
voicemail, new mail, sent mail, Tweet, Facebook Post, and reminders. See Sounds and silence on
page 28.
Guided Access
ft
You can purchase ringtones from the iTunes Store on iPad. See Chapter 20, iTunes Store, on
page 89.
Guided Access helps someone using iPad to stay focused on a task. Guided Access limits iPad to
a single app, and lets you control which app features are available. Use Guided Access to:
Temporarily restrict iPad to a particular app
•
Disable areas of the screen that aren’t relevant to a task, or areas where an accidental gesture
might cause a distraction
•
Disable the iPad hardware buttons
ra
•
Use Guided Access. Go to Settings > General > Accessibility > Guided Access, where you can:
•
Turn Guided Access on or of
•
Set a passcode that controls the use of Guided Access and prevents someone from leaving an
active session
•
Set whether other accessibility shortcuts are available during a session
Start a Guided Access session. Open the app you want to run, then triple-click the Home button.
Adjust settings for the session, then click Start.
•
Disable app controls and areas of the app screen: Circle any part of the screen you want to
disable. Use the handles to adjust the area.
•
Enable the Sleep/Wake or Volume buttons: Tap Options below Hardware Buttons.
•
Ignore all screen touches: Turn of Touch.
•
Keep iPad from switching from portrait to landscape or from responding to any other motions:
Turn of Motion.
End a Guided Access session. Triple-click the Home button and enter the Guided
Access passcode.
Appendix A Accessibility
117
Apple Confidential
Switch Control
Switch Control lets you control iPad using a single switch, or multiple switches. Use any of several
methods to perform actions such as selecting, tapping, dragging, typing, and even free-hand
drawing. The basic technique is to use a switch to select an item or location on the screen, and
then use the same (or diferent) switch to choose an action to perform on that item or location.
Three basic methods are:
•
Item scanning (default), which highlights diferent items on the screen until you select one.
•
Point scanning, which lets you use scanning crosshairs to pick a screen location.
•
Manual selection, which lets you move from item to item on demand (requires multiple
switches).
Whichever method you use, when you select an individual item (rather than a group), a menu
appears so you can choose how to act on the selected item (tap, drag, or pinch, for example).
If you use multiple switches, you can set up each switch to perform a speciic action and
customize your item selection method. For example, instead of automatically scanning screen
items, you can set up switches to move to the next or previous item on demand.
AssistiveTouch
ft
You can adjust the behavior of Switch Control in a variety of ways, to suit your speciic needs
and style.
ra
AssistiveTouch helps you use iPad if you have diiculty touching the screen or pressing the
buttons. You can use a compatible adaptive accessory (such as a joystick) together with
AssistiveTouch to control iPad. You can also use AssistiveTouch without an accessory to perform
gestures that are diicult for you.
Turn on AssistiveTouch. Go to Settings > General > Accessibility > AssistiveTouch. To set
Triple-click Home to turn AssistiveTouch on or of, go to Settings > General > Accessibility >
Triple-click Home.
Adjust the tracking speed (with accessory attached). Go to Settings > General > Accessibility >
AssistiveTouch > Touch speed.
Show or hide the AssistiveTouch menu. Click the secondary button on your accessory.
Hide the menu button (with accessory attached). Go to Settings > General > Accessibility >
AssistiveTouch > Always Show Menu.
Perform a swipe or drag that uses 2, 3, 4, or 5 ingers. Tap the menu button, tap Gestures, and
then tap the number of digits needed for the gesture. When the corresponding circles appear
on the screen, swipe or drag in the direction required by the gesture. When you inish, tap the
menu button.
Perform a pinch gesture. Tap the menu button, tap Favorites, and then tap Pinch. When the
pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the
pinch circles in or out to perform a pinch gesture. When you inish, tap the menu button.
Create your own gesture. Tap the menu button, tap Favorites, and then tap an empty gesture
placeholder. Or, go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture.
Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad. Tap the menu button,
then tap Device.
Simulate pressing the Home button. Tap the menu button, then tap Home.
Appendix A Accessibility
118
Apple Confidential
Move the menu button. Drag it to any location on the screen.
Exit a menu without performing a gesture. Tap anywhere outside the menu.
Widescreen keyboards
All built-in iPad apps show a larger onscreen keyboard when you rotate iPad to landscape view.
You can also type using an Apple Wireless Keyboard.
Accessibility in OS X
Take advantage of the accessibility features in OS X when you use iTunes to sync information and
content from your iTunes library to iPad. In the Finder, choose Help > Help Center, then search for
“accessibility.”
ra
ft
For more information about iPad and OS X accessibility features, go to
www.apple.com/accessibility.
Appendix A Accessibility
119
B
iPad in Business
iPad in the enterprise
With support for secure access to corporate networks, directories, and Microsoft Exchange,
iPad is ready to go to work. For detailed information about using iPad in business, go to
www.apple.com/ipad/business.
Mail, Contacts, and Calendar
ft
To use iPad with your work accounts, you need to know the settings your organization requires.
If you received your iPad from your organization, the settings and apps you need might already
be installed. If it’s your own iPad, your system administrator may provide you with the settings for
you to enter, or they may have you connect to a mobile device management server that installs
the settings and apps you should have.
ra
Organizational settings and accounts are typically in coniguration proiles. You might be asked
to install a coniguration proile that was sent to you in an email, or one that is downloaded
from a web page. When you open the ile, iPad asks for your permission to install the proile, and
displays information about what it contains.
In most cases, when you install a coniguration proile that sets up an account for you, some iPad
settings can’t be changed. For example, your organization might turn on Auto-Lock and require
you to set a passcode in order to protect the information in the accounts you access.
You can see your proiles in Settings > General > Proiles. If you delete a proile, all of the settings
and accounts associated with the proile are also removed, including any custom apps your
organization provided or had you download. In some cases, you need a passcode to remove
proiles. If so, contact your system administrator.
Network access
A VPN (virtual private network) provides secure access over the Internet to private resources,
such as your organization’s network. You may need to install a VPN app from the App Store
that conigures your iPad to access a particular network. Contact your system administrator for
information about apps and settings you need.
Apps
In addition to the built-in apps and the ones you get from the App Store, your organization may
want you to have certain other apps. They might provide you with a pre-paid redemption code for
the App Store. When you download an app using a redemption code, you own it, even though
your organization purchased it for you.
120
Appendix
Apple Confidential
Apple Confidential
Your organization can also purchase App Store app licenses that they assign to you for a period
of time, but that they retain. You’ll be invited to participate in your organization’s program in
order to access these apps. After you’re enrolled with your iTunes account, you’re prompted to
install these apps as they’re assigned to you. You can also ind them in your Purchased list in the
App Store. An app you receive this way is removed if the organization assigns it to someone else.
ra
ft
Your organization might also have custom apps that they’ve developed. These apps aren’t
in the App Store. You’ll install them from a webpage or, if your organization uses mobile
device management, you’ll receive a notiication asking you to install them over the air. These
apps belong to your organization, and they may be removed or stop working if you delete a
coniguration proile or dissociate iPad from the mobile device management server.
Appendix B iPad in Business
121
International Keyboards
International keyboards let you type text in many diferent languages, including Asian languages
and languages written from right to left.
Use international keyboards
International keyboards let you type text in many diferent languages, including Asian
languages and languages written from right to left. For a list of supported keyboards, go to
www.apple.com/ipad/specs.
Manage keyboards. Go to Settings > General > International > Keyboards.
Add a keyboard: Tap Add New Keyboard, then choose a keyboard from the list. Repeat to add
more keyboards.
•
Remove a keyboard: Tap Edit, tap
tap Delete.
•
Edit your keyboard list: Tap Edit, then drag
ft
•
next to the keyboard you want to remove, then
next to a keyboard to a new place in the list.
ra
To enter text in a diferent language, switch keyboards.
Switch keyboards while typing. Touch and hold the Globe key
to show all your enabled
keyboards. To choose a keyboard, slide your inger to the name of the keyboard, then release. The
Globe key
appears only if you enable more than one keyboard.
You can also just tap . When you tap , the name of the newly activated keyboard appears
briely. Continue tapping to access other enabled keyboards.
Many keyboards provide letters, numbers, and symbols that aren’t visible on the keyboard.
Enter accented letters or other characters. Touch and hold the related letter, number, or symbol,
then slide to choose a variant. For example:
•
On a Thai keyboard: Choose native numbers by touching and holding the related
Arabic number.
•
On a Chinese, Japanese, or Arabic keyboard: Suggested characters or candidates appear at the
top of the keyboard. Tap a candidate to enter it, or swipe left to see more candidates.
Use the extended candidate list. Tap the up arrow on the right to view the full candidate list.
•
Scroll the list: Swipe up or down.
•
Return to the short list: Tap the down arrow.
When using certain Chinese or Japanese keyboards, you can create a shortcut for word and input
pairs. The shortcut is added to your personal dictionary. When you type a shortcut while using a
supported keyboard, the paired word or input is substituted for the shortcut.
Turn shortcuts on or of. Go to Settings > General > Keyboard > Shortcuts. Shortcuts are
available for:
•
Simpliied Chinese: Pinyin
122
Appendix
Apple Confidential
Apple Confidential
•
Traditional Chinese: Pinyin and Zhuyin
•
Japanese: Romaji and 50 Key
Special input methods
You can use keyboards to enter some languages in diferent ways. A few examples are Chinese
Cangjie and Wubihua, Japanese Kana, and Facemarks. You can also use your inger or a stylus to
write Chinese characters on the screen.
Build Chinese characters from the component Cangjie keys. As you type, suggested
characters appear. Tap a character to choose it, or continue typing up to ive components to see
more options.
Build Chinese Wubihua (stroke) characters. Use the keypad to build Chinese characters using
up to ive strokes, in the correct writing sequence: horizontal, vertical, left falling, right falling, and
hook. For example, the Chinese character 圈 (circle) should begin with the vertical stroke 丨.
As you type, suggested Chinese characters appear (the most commonly used characters
appear irst). Tap a character to choose it.
•
If you’re not sure of the correct stroke, enter an asterisk (*). To see more character options, type
another stroke, or scroll through the character list.
•
Tap the match key (匹配) to show only characters that match exactly what you typed.
ft
•
ra
Write Chinese characters. Write Chinese characters directly on the screen with your inger when
Simpliied or Traditional Chinese handwriting input is turned on. As you write character strokes,
iPad recognizes them and shows matching characters in a list, with the closest match irst. When
you choose a character, its likely follow-on characters appear in the list as additional choices.
Touchpad
You can type some complex characters, such as 鱲 (part of the name for the Hong Kong
International Airport), by writing two or more component characters in sequence. Tap the
character to replace the characters you typed. Roman characters are also recognized.
Type Japanese kana. Use the Kana keypad to select syllables. For more syllable options, tap the
arrow key and select another syllable or word from the window.
Type Japanese romaji. Use the Romaji keyboard to type syllables. Alternative choices appear
along the top of the keyboard, tap one to type it. For more syllable options, tap the arrow key
and select another syllable or word from the window.
Appendix C International Keyboards
123
Apple Confidential
Type facemarks or emoticons. Use the Japanese Kana keyboard and tap the
•
, then tap the
Use the Chinese (Simpliied or Traditional) Pinyin or (Traditional) Zhuyin keyboard: Tap
tap the key.
key.
, then
ra
ft
•
Use the Japanese Romaji keyboard (QWERTY-Japanese layout): Tap
key. Or you can:
Appendix C International Keyboards
124
Safety, Handling, & Support
Important safety information
WARNING: Failure to follow these safety instructions could result in ire, electric shock, or other
injuries, or damage to iPad or other property. Read all the safety information below before
using iPad.
ft
Handling Handle iPad with care. It is made of metal, glass, and plastic and has sensitive
electronic components inside. iPad can be damaged if dropped, burned, punctured, or crushed,
or if it comes in contact with liquid. Don’t use a damaged iPad, such as one with a cracked
screen, as it may cause injury. If you’re concerned about scratching, consider using a case
or cover.
Repairing Don’t open iPad and don’t attempt to repair iPad by yourself. Disassembling iPad may
damage it or may cause injury to you. If iPad is damaged, malfunctions, or comes in contact with
liquid, contact Apple or an Apple Authorized Service Provider. You can ind more information
about getting service at www.apple.com/support/ipad/service/faq.
ra
Battery Don’t attempt to replace the iPad battery yourself—you may damage the battery, which
could cause overheating and injury. The lithium-ion battery in iPad should be replaced only by
Apple or an Apple Authorized Service Provider, and must be recycled or disposed of separately
from household waste. Don’t incinerate the battery. For information about battery recycling and
replacement, go to www.apple.com/batteries.
Distraction Using iPad in some circumstances may distract you and might cause a dangerous
situation. Observe rules that prohibit or restrict the use of mobile devices or headphones (for
example, avoid texting while driving a car or using headphones while riding a bicycle).
Navigation Maps, directions, Flyover, and location-based apps depend on data services.
These data services are subject to change and may not be available in all areas, resulting in
maps, directions, Flyover, or location-based information that may be unavailable, inaccurate,
or incomplete. Compare the information provided on iPad to your surroundings. Use common
sense when navigating. Always observe current road conditions and posted signs to resolve any
discrepancies. Some Maps features require Location Services. See Privacy on page 31.
Charging Charge iPad with the included cable and power adapter or other third-party “Made for
iPad” cables and power adapters that are compatible with USB 2.0 or later. Using damaged cables
or chargers, or charging when moisture is present, can cause electric shock. When you use the
Apple USB Power Adapter to charge iPad, make sure that the AC plug or AC power cord is fully
inserted into the adapter before you plug it into a power outlet. Power adapters may become
warm during normal use, and prolonged contact may cause injury. Always allow adequate
ventilation around power adapters when using them.
125
Appendix
Apple Confidential
Apple Confidential
Hearing loss Listening to sound at high volumes may damage your hearing. Background noise,
as well as continued exposure to high volume levels, can make sounds seem quieter than they
actually are. Turn on the audio and check the volume before inserting anything in your ear. For
more information about hearing loss, see www.apple.com/sound. For information about how to
set a maximum volume limit on iPad, see Music settings on page 87.
WARNING: To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Apple headsets The headsets sold with iPhone 4S or later in China (identiiable by dark
insulating rings on the plug) are designed to comply with Chinese standards and are compatible
with iPhone 4S or later, iPad 2 or later, and iPod touch 5th generation. Use only compatible
headsets with your device.
Radio signals iPad uses radio signals to connect to wireless networks. For information about
the amount of power used to transmit these signals, and about steps you can take to minimize
exposure, see Settings > General > About > Legal > RF Exposure.
ft
Radio frequency interference Observe signs and notices that prohibit or restrict the use of
mobile devices (for example, in healthcare facilities or blasting areas). Although iPad is designed,
tested, and manufactured to comply with regulations governing radio frequency emissions, such
emissions from iPad can negatively afect the operation of other electronic equipment, causing
them to malfunction. Turn of iPad or use Airplane Mode to turn of the iPad wireless transmitters
when use is prohibited, such as while traveling in aircraft, or when asked to do so by authorities.
ra
Medical devices iPad contains radios that emit electromagnetic ields. These electromagnetic
ields may interfere with pacemakers or other medical devices. If you wear a pacemaker, maintain
at least 6 inches (approximately 15 cm) of separation between your pacemaker and iPad. If you
suspect iPad is interfering with your pacemaker or any other medical device, stop using iPad and
consult your physician for information speciic to your medical device. iPad has magnets along
the left edge of the device and on the right side of the front glass, which may interfere with
pacemakers, deibrillators, or other medical devices. The iPad Smart Cover and iPad Smart Case
also contain magnets. Maintain at least 6 inches (approximately 15 cm) of separation between
your pacemaker or deibrillator and iPad, the iPad Smart Cover, or the iPad Smart Case.
Medical conditions If you have any medical condition that you believe could be afected by iPad
(for example, seizures, blackouts, eyestrain, or headaches), consult with your physician prior to
using iPad.
Explosive atmospheres Do not charge or use iPad in any area with a potentially explosive
atmosphere, such as at a fueling area, or in areas where the air contains chemicals or particles
(such as grain, dust, or metal powders). Obey all signs and instructions.
Repetitive motion When you perform repetitive activities such as typing or playing games on
iPad, you may experience occasional discomfort in your hands, arms, wrists, shoulders, neck, or
other parts of your body. If you experience discomfort, stop using iPad and consult a physician.
High-consequence activities This device is not intended for use where the failure of the device
could lead to death, personal injury, or severe environmental damage.
Choking hazard Some iPad accessories may present a choking hazard to small children. Keep
these accessories away from small children.
Appendix D Safety, Handling, & Support
126
Apple Confidential
Important handling information
Cleaning Clean iPad immediately if it comes in contact with anything that may cause stains—
such as dirt, ink, makeup, or lotions. To clean:
•
Disconnect all cables and turn iPad of (press and hold the Sleep/Wake button, then slide the
onscreen slider).
•
Use a soft, lint-free cloth.
•
Avoid getting moisture in openings.
•
Don’t use cleaning products or compressed air.
The front of iPad is made of glass with a ingerprint-resistant oleophobic (oil repellant) coating.
This coating wears over time with normal usage. Cleaning products and abrasive materials will
further diminish the coating, and may scratch the glass.
ft
Using connectors, ports, and buttons Never force a connector into a port or apply excessive
pressure to a button, because this may cause damage that is not covered under the warranty. If
the connector and port don’t join with reasonable ease, they probably don’t match. Check for
obstructions and make sure that the connector matches the port and that you have positioned
the connector correctly in relation to the port.
Lightning Discoloration of the Lightning plug after regular use is normal. Dirt, debris, and
exposure to liquids may cause discoloration. To remove the discoloration or if the cable becomes
warm during use or won’t charge or sync your iPad, disconnect the Lightning cable from your
computer or power adapter and clean it with a soft, dry, lint-free cloth. Do not use liquids or
cleaning products when cleaning the Lightning connector.
ra
Operating temperature iPad is designed to work in ambient temperatures between 32° and 95°
F (0° and 35° C) and stored in temperatures between -4° and 113° F (-20° and 45° C). iPad can be
damaged and battery life shortened if stored or operated outside of these temperature ranges.
Avoid exposing iPad to dramatic changes in temperature or humidity. When you’re using iPad or
charging the battery, it is normal for iPad to get warm.
If the interior temperature of iPad exceeds normal operating temperatures (for example, in a hot
car or in direct sunlight for extended periods of time), you may experience the following as it
attempts to regulate its temperature:
iPad stops charging.
•
The screen dims.
•
A temperature warning screen appears.
•
Some apps may close.
•
Important: You may not be able to use iPad while the temperature warning screen is displayed.
If iPad can’t regulate its internal temperature, it goes into deep sleep mode until it cools. Move
iPad to a cooler location out of direct sunlight and wait a few minutes before trying to use
iPad again.
For more information, go to support.apple.com/kb/HT2101.
iPad Support site
Comprehensive support information is available online at
www.apple.com/support/ipad. To contact Apple for personalized support (not available in all
areas), see www.apple.com/support/contact.
Appendix D Safety, Handling, & Support
127
Apple Confidential
Restart or reset iPad
If something isn’t working right, try restarting iPad, forcing an app to quit, or resetting iPad.
Restart iPad. Hold down the Sleep/Wake button until the red slider appears. Slide your inger
across the slider to turn of iPad. To turn iPad back on, hold down the Sleep/Wake button until
the Apple logo appears.
iPad may be low on power. Connect iPad to the USB power adapter to charge. See Charge and
monitor the battery on page 34.
Force an app to quit. Hold down the Sleep/Wake button on top of iPad for a few seconds until a
red slider appears, then hold down the Home button until the app closes.
If you can’t turn of iPad or if the problem continues, you may need to reset iPad. Do this only if
you’re unable to restart iPad.
Reset iPad. Hold down the Sleep/Wake button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Reset iPad settings
ft
You can reset the word dictionary, network settings, home screen layout, and location warnings.
You can also erase all of your content and settings.
Reset iPad settings. Go to Settings > General > Reset, then choose an option:
Reset All Settings: All your preferences and settings are reset.
•
Erase All Content and Settings: Your information, and settings are removed. iPad cannot be used
until it’s set up again.
•
Reset Network Settings: When you reset network settings, previously used networks and VPN
settings that weren’t installed by a coniguration proile are removed. (To remove VPN settings
installed by a coniguration proile, go to Settings > General > Proile, then select the proile
and tap Remove. This also removes other settings or accounts provided by the proile.) Wi-Fi
is turned of and then back on, disconnecting you from any network you’re on. The Wi-Fi and
“Ask to Join Networks” settings remain turned on.
•
Reset Keyboard Dictionary: You add words to the keyboard dictionary by rejecting words iPad
suggests as you type. Resetting the keyboard dictionary erases all words you’ve added.
•
Reset Home Screen Layout: Returns the built-in apps to their original layout on the
Home screen.
•
Reset Location & Privacy: Resets the location services and privacy settings to their
factory defaults.
ra
•
An app doesn’t ill the screen
Most apps for iPhone and iPod touch can be used with iPad, but they might not take advantage
of the large screen. In this case, tap to zoom in on the app. Tap to return to the original size.
Check the App Store to see if there’s a version of the app that’s optimized for iPad, or a universal
version that’s optimized for iPhone, iPod touch, and iPad.
Appendix D Safety, Handling, & Support
128
Apple Confidential
Onscreen keyboard doesn’t appear
If iPad is paired with a Bluetooth keyboard, the onscreen keyboard doesn’t appear. To make the
onscreen keyboard appear, press the Eject key on a Bluetooth keyboard. You can also make the
onscreen keyboard appear by moving the Bluetooth keyboard out of range or turning it of.
Get information about your iPad
See information about iPad. Go to Settings > General > About. The items you can view include:
•
Number of songs, videos, photos, and applications
•
Capacity and available storage space
•
iOS version
•
Model number
•
Serial number
•
Wi-Fi and Bluetooth addresses
Diagnostics & Usage and Legal (including legal notices, license, warranty, regulatory marks and
RF exposure information)
To copy the serial number and other identiiers, touch and hold the identiier until Copy appears.
ft
•
To help Apple improve products and services, iPad sends diagnostic and usage data. This data
does not personally identify you, but may include location information.
ra
View or turn of diagnostic information. Go to Settings > General > About > Diagnostics &
Usage.
Usage information
View usage information. Go to Settings > General > Usage to:
•
View each app’s storage
•
View and manage iCloud storage
•
See the elapsed time since iPad has been charged
Disabled iPad
If iPad is disabled because you forgot your passcode or entered an incorrect passcode too many
times, you can restore iPad from an iTunes or iCloud backup and reset the passcode. For more
information, see Restore iPad on page 131.
If you get a message in iTunes that your iPad is locked and you must enter a passcode, see
support.apple.com/kb/HT1212.
VPN settings
A VPN (virtual private network) provides secure access over the Internet to private networks,
such as the network at your organization. You may need to install a VPN app from the App Store
that conigures your iPad to access a network. Contact your system administrator for information
about the app and settings you need.
Appendix D Safety, Handling, & Support
129
Apple Confidential
Proiles settings
Coniguration proiles deine settings for using iPad with corporate or school networks or
accounts. You might be asked to install a coniguration proile that was sent to you in an email,
or one that is downloaded from a web page. iPad asks for your permission to install the proile,
and displays information about what it contains, when you open the ile. You can see the proiles
you have installed in Settings > General > Proiles. If you delete a proile, all of the settings, apps,
and data associated with the proile are also deleted.
Back up iPad
You can use iCloud or iTunes to automatically back up iPad (in iTunes, use File > Device > Back
Up). If you choose to back up using iCloud, you can’t also use iTunes to automatically back up to
your computer, but you can use iTunes to manually back up to your computer. iCloud backs up
iPad daily over Wi-Fi, when it’s connected to a power source and is locked. The date and time of
the last backup is listed at the bottom of the Storage & Backup screen.
iCloud backs up your:
Purchased music, movies, TV shows, apps, and books
•
Photos and videos in your Camera Roll
•
iPad settings
•
App data
•
Home screen, folders, and app layout
•
Messages
•
Ringtones
ra
ft
•
Note: Purchased content is not backed up in all areas.
Turn on iCloud backups. Go to Settings > iCloud, then log in with your Apple ID and password, if
required. Go to Storage & Backup, then turn on iCloud Backup. To turn on backups in iTunes, go
to File > Device > Back Up.
Back up immediately. Go to Settings > iCloud > Storage & Backup, then tap Back Up Now.
Encrypt your backup. iCloud backups are encrypted automatically so that your data is protected
from unauthorized access both while it’s transmitted to your devices and when it’s stored
in iCloud. If you’re using iTunes for your backup, select “Encrypt iPad backup” in the iTunes
Summary pane.
Manage your backups. Go to Settings > iCloud > Storage & Backup, then tap Manage Storage.
Tap the name of your iPad. You can manage which apps are backed up to iCloud, and remove
existing backups. In iTunes, remove backups in iTunes Preferences.
View the devices being backed up. Go to Settings > iCloud > Storage & Backup >
Manage Storage.
Stop iCloud backups. Go to Settings > iCloud > Storage & Backup, then turn of iCloud Backup.
Music not purchased in iTunes isn’t backed up in iCloud. Use iTunes to back up and restore that
content. See Sync with iTunes on page 16.
Important: Backups for music, movies, or TV show purchases are not available in all countries.
Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or
iBooks Store.
Appendix D Safety, Handling, & Support
130
Apple Confidential
Purchased content and Photo Sharing content don’t count against your 5 GB of free
iCloud storage.
For more information about backing up iPad, see support.apple.com/kb/HT5262.
Update and restore iPad software
You can update iPad software in Settings, or by using iTunes. You can also erase iPad, and then
use iCloud or iTunes to restore a backup.
Deleted data is no longer accessible through the iPad user interface, but it isn’t erased from iPad.
For information about erasing all content and settings, see Restart or reset iPad on page 128.
Update iPad
You can update iPad software in Settings or by using iTunes.
Update wirelessly on iPad. Go to Settings > General > Software Update. iPad checks for available
software updates.
ft
Update software in iTunes. iTunes checks for available software updates each time you sync iPad
using iTunes. See Sync with iTunes on page 16.
For more information about updating iPad software, go to support.apple.com/kb/HT4623.
Restore iPad
You can use iCloud or iTunes to restore iPad from a backup.
ra
Restore from an iCloud backup. Reset iPad to erase all settings and information. Sign in to
iCloud and choose Restore from a Backup in the Setup Assistant. See Restart or reset iPad on
page 128.
Restore from an iTunes backup. Connect iPad to the computer you normally sync with, select
iPad in the iTunes window, and click Restore in the Summary pane.
When the iPad software is restored, you can either set it up as a new iPad, or restore your music,
videos, app data, and other content from a backup.
For more information about restoring iPad software, go to support.apple.com/kb/HT1414.
Cellular settings
Use Cellular settings to turn cellular data and roaming on or of, set which apps and services use
cellular data, see call time and cellular data usage, and set other cellular options.
If iPad is connected to the Internet via the cellular data network, the
appears in the status bar.
, , or
icon
LTE, 4G, and 3G service on GSM cellular networks support simultaneous voice and data
communications. For all other cellular connections, you can’t use Internet services while you’re
talking on the phone unless iPad also has a Wi-Fi connection to the Internet. Depending on
your network connection, you may not be able to receive calls while iPad transfers data over the
cellular network—when downloading a webpage, for example.
GSM networks: On an EDGE or GPRS connection, incoming calls may go directly to voicemail
during data transfers. For incoming calls that you answer, data transfers are paused.
Appendix D Safety, Handling, & Support
131
Apple Confidential
CDMA networks: On EV-DO connections, data transfers are paused when you answer incoming
calls. On 1xRTT connections, incoming calls may go directly to voicemail during data transfers.
For incoming calls that you answer, data transfers are paused.
Data transfer resumes when you end the call.
If Cellular Data is of, all data services use only Wi-Fi—including email, web browsing, push
notiications, and other services. If Cellular Data is on, carrier charges may apply. For example,
using certain features and services that transfer data, such as Siri and Messages, could result in
charges to your data plan.
Turn Cellular Data on or of. Go to Settings > Cellular. The following options may also be
available:
•
•
Turn Voice Roaming on or of (CDMA): Turn Voice Roaming of to avoid charges from using other
carrier’s networks. When your carrier’s network isn’t available, iPad won’t have cellular (data or
voice) service.
Turn Data Roaming on or of: Data Roaming permits Internet access over a cellular data
network when you’re in an area not covered by your carrier’s network. When you’re traveling,
you can turn of Data Roaming to avoid roaming charges. See Cellular settings on page 131.
Enable or disable 3G: Using 3G loads Internet data faster in some cases, but may decrease
battery performance. If you’re making a lot of phone calls, you may want to turn 3G of to
extend battery life. This option is not available in all areas.
ft
•
ra
Set whether cellular data is used for apps and services. Go to Settings > Cellular, then turn
cellular data on or of for any app that can use cellular data. If a setting is of, iPad uses only Wi-Fi
for that service. The iTunes setting includes both iTunes Match and automatic downloads from
the iTunes Store and the App Store.
Sound, music, and video
If iPad doesn’t have sound or if video doesn’t play, try these steps.
No sound
•
Make sure the iPad speaker isn’t covered.
•
Make sure the Side Switch isn’t set to silent. See Volume button and Side Switch on page 10.
If you’re using a headset, unplug it, then plug it in again. Make sure you push the plug all the
way in.
•
Make sure the volume isn’t turned all the way down.
•
Music on iPad might be paused. If you’re using a headset with a play button, try pressing the
play button to resume playback. Or from the Home screen, tap Music, then tap .
•
Check to see if a volume limit is set. In Settings, go to Music > Volume Limit.
•
If you’re using the line out port on the optional iPad Dock, make sure that you turn on the
external speakers or stereo, and that they’re plugged in correctly and working properly. Use
the volume controls on the the external speakers or stereo, not on iPad.
•
If you’re using an app that works with AirPlay, check to see if the AirPlay device you’re sending
the sound to is turned on and the volume is turned up. If you want to hear sound through
iPad’s speaker, tap
and select it from the list.
•
Appendix D Safety, Handling, & Support
132
Apple Confidential
A song, video, or other item won’t play
The song, video, audiobook, or podcast may be encoded in a format that iPad doesn’t
support. For information about the audio and video ile formats iPad supports, go to
www.apple.com/ipad/specs.
If a song or video in your iTunes library isn’t supported by iPad, you may be able to convert it to
a format iPad supports. For example, you can use iTunes for Windows to convert nonprotected
WMA iles to a format iPad supports. For more information, open iTunes and choose Help >
iTunes Help.
No video or sound when using AirPlay
To send video or audio to an AirPlay device such as an Apple TV, iPad and the AirPlay device
must be connected to the same wireless network. If you don’t see the
button, iPad isn’t
connected to the same Wi-Fi network as an AirPlay device, or the app you’re using doesn’t
support AirPlay.
When sound or video is being sent to an AirPlay device, iPad doesn’t display video or play
audio. To direct the content to iPad and disconnect iPad from the AirPlay device, tap
and
select iPad in the list.
•
Some apps play only audio over AirPlay. If video isn’t working, make sure that the app you’re
using supports both audio and video.
•
If the Apple TV has been set up to require a passcode, you must enter it on iPad when asked,
in order to use AirPlay.
•
Make sure the speakers on the AirPlay device are turned on and turned up. If you’re using an
Apple TV, make sure the TV’s input source is set to Apple TV. Make sure the volume control on
iPad is turned up.
•
When iPad is streaming with AirPlay, it must remain connected to the Wi-Fi network. If you
take iPad out of range, playback stops.
•
Depending on the speed of your network, it may take 30 seconds or more for playback to
begin when using AirPlay.
ra
ft
•
For more information about AirPlay, go to support.apple.com/kb/HT4437.
No image on TV or projector connected to iPad
When you connect iPad to a TV or projector using a USB cable, the attached display
automatically mirrors the iPad screen. Some apps may support using the attached display as a
second monitor. Check the app’s settings and documentation.
•
•
To view HD videos in high resolution, use the Apple Digital AV Adapter or a component video
cable.
Make sure the video cable is irmly connected at both ends, and that it’s a supported cable.
If iPad is connected to an A/V switchbox or receiver, try connecting it directly to the TV or
projector instead.
•
Make sure that your TV has the proper video input selected, such as HDMI or
component video.
•
If no video appears, press the Home button, disconnect and reconnect the cable, and
try again.
Appendix D Safety, Handling, & Support
133
Apple Confidential
Sell or give away iPad?
Before you sell or give away your iPad, be sure to erase all content and your personal information.
If you’ve enabled Find My iPad (see Find My iPad on page 33), Activation Lock is on. You need to
turn of Activation Lock before the new owner can activate iPad under his or her own account.
Erase iPad and remove Activation Lock. Go to Settings > General > Reset > Erase All Content
and Settings.
See support.apple.com/kb/HT5661.
Learning more, service, and support
Refer to the following resources to get more iPad-related safety, software, service, and
support information.
Do this
Using iPad safely
See Important safety information on page 125.
iPad service and support, tips, forums, and Apple
software downloads
Go to www.apple.com/support/ipad.
The latest information about iPad
Go to www.apple.com/ipad.
Managing your Apple ID account
ft
To learn about
Go to appleid.apple.com.
Go to help.apple.com/icloud.
Using iCloud
Open iTunes and choose Help > iTunes Help. For an
online iTunes tutorial (not available in all areas), go to
www.apple.com/support/itunes.
ra
Using iTunes
Go to www.apple.com/support/ios.
Obtaining warranty service
First follow the advice in this guide. Then go to
www.apple.com/support/ipad.
Viewing iPad regulatory information
On iPad, go to Settings > General > About > Legal >
Regulatory.
Battery replacement service
Go to www.apple.com/batteries/replacements.html.
Using iPad in an enterprise environment
Go to www.apple.com/ipad/business.
Using other Apple iOS apps
FCC compliance statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment of and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
Appendix D Safety, Handling, & Support
134
Apple Confidential
•
•
•
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit diferent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modiications to this product not authorized by Apple could void
the electromagnetic compatibility (EMC) and wireless compliance and negate your authority
to operate the product. This product has demonstrated EMC compliance under conditions
that included the use of compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral devices and shielded cables
between system components to reduce the possibility of causing interference to radios,
televisions, and other electronic devices.
Canadian regulatory statement
ft
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
the device.
ra
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
CAN ICES-3 (B)/NMB-3(B)
Disposal and recycling information
Your iPad must be disposed of properly according to local laws and regulations. Because it
contains a battery, iPad must be disposed of separately from household waste. When your iPad
reaches its end of life, contact Apple or your local authorities to learn about recycling options.
Battery replacement: The lithium-ion battery in iPad should be replaced only by Apple
or an Apple Authorized Service Provider, and must be recycled or disposed of separately
from household waste. For information about battery recycling and replacement, go
to www.apple.com/batteries/replacements.html.
For information about Apple’s recycling program, go to www.apple.com/recycling.
Battery Charger Eiciency
Türkiye
Appendix D Safety, Handling, & Support
135
Apple Confidential
Türkiye Cumhuriyeti: EEE Yönetmelĭine Uygundur.
European Union—Disposal Information
The symbol above means that according to local laws and regulations your product and/or its
battery shall be disposed of separately from household waste. When this product reaches its
end of life, take it to a collection point designated by local authorities. The separate collection
and recycling of your product and/or its battery at the time of disposal will help conserve
natural resources and ensure that it is recycled in a manner that protects human health and
the environment.
ra
ft
Union Euroṕenne—informations sur l’́limination: Le symbole ci-dessus signiie que,
conformément aux lois et réglementations locales, vous devez jeter votre produit et/
ou sa batterie séparément des ordures ménagères. Lorsque ce produit arrive en in de vie,
apportez-le à un point de collecte désigné par les autorités locales. La collecte séparée et le
recyclage de votre produit et/ou de sa batterie lors de sa mise au rebut aideront à préserver les
ressources naturelles et à s’assurer qu’il est recyclé de manière à protéger la santé humaine et
l’environnement.
Europ̈ische Union—Informationen zur Entsorgung: Das oben aufgeführte Symbol weist darauf
hin, dass dieses Produkt und/oder die damit verwendete Batterie den geltenden gesetzlichen
Vorschriften entsprechend und vom Hausmüll getrennt entsorgt werden muss. Geben Sie dieses
Produkt zur Entsorgung bei einer oiziellen Sammelstelle ab. Durch getrenntes Sammeln und
Recycling werden die Rohstofreserven geschont und es ist sichergestellt, dass beim Recycling
des Produkts und/oder der Batterie alle Bestimmungen zum Schutz von Gesundheit und Umwelt
eingehalten werden.
Unione Europea—informazioni per lo smaltimento: Il simbolo qui sopra signiica che, in base
alle leggi e alle normative locali, il prodotto e/o la sua batteria dovrebbero essere riciclati
separatamente dai riiuti domestici. Quando il prodotto diventa inutilizzabile, portalo nel punto
di raccolta stabilito dalle autorità locali. La raccolta separata e il riciclaggio del prodotto e/o della
sua batteria al momento dello smaltimento aiutano a conservare le risorse naturali e assicurano
che il riciclaggio avvenga nel rispetto della salute umana e dell’ambiente.
Europeiska unionen—information om kassering: Symbolen ovan betyder att produkten
och/eller dess batteri enligt lokala lagar och bestämmelser inte får kastas tillsammans med
hushållsavfallet. När produkten har tjänat ut måste den tas till en återvinningsstation som utsetts
av lokala myndigheter. Genom att låta den uttjänta produkten och/eller dess batteri tas om hand
för återvinning hjälper du till att spara naturresurser och skydda hälsa och miljö.
Brasil—Informações sobre descarte e reciclagem
Appendix D Safety, Handling, & Support
136
Apple Confidential
O símbolo indica que este produto e/ou sua bateria não devem ser descartadas no lixo
doméstico. Quando decidir descartar este produto e/ou sua bateria, faça-o de acordo com as
leis e diretrizes ambientais locais. Para informações sobre o programa de reciclagem da Apple,
pontos de coleta e telefone de informações, visite www.apple.com/br/environment.
Apple and the environment
ra
ft
At Apple, we recognize our responsibility to minimize the environmental impacts of our
operations and products. For more information, go to www.apple.com/environment.
Appendix D Safety, Handling, & Support
137
Apple Confidential
K Apple Inc.
© 2013 Apple Inc. All rights reserved.
Apple, the Apple logo, AirDrop, AirPlay, AirPort, AirPort Express,
AirPort Extreme, Aperture, Apple TV, FaceTime, Finder, iBooks,
iCal, iLife, iMessage, iPad, iPhone, iPhoto, iPod, iPod touch,
iSight, iTunes, Keynote, Mac, Mac OS, Numbers, OS X, Pages,
Passbook, Photo Booth, Safari, Siri, Smart Cover, Spotlight, and
Time Capsule are trademarks of Apple Inc., registered in the
U.S. and other countries.
AirPrint, EarPods, Flyover, Guided Access, Lightning, and MultiTouch are trademarks of Apple Inc.
Other company and product names mentioned herein may be
trademarks of their respective companies.
Some apps are not available in all areas. App availability is
subject to change.
Content available on iTunes. Title availability is subject
to change.
Mention of third-party products is for informational
purposes only and constitutes neither an endorsement nor
a recommendation. Apple assumes no responsibility with
regard to the performance or use of these products. All
understandings, agreements, or warranties, if any, take place
directly between the vendors and the prospective users. Every
efort has been made to ensure that the information in this
manual is accurate. Apple is not responsible for printing or
clerical errors.
ft
Apple Store, Genius, iAd, iCloud, iTunes Extras, iTunes Plus, and
iTunes Store are service marks of Apple Inc., registered in the
U.S. and other countries.
Adobe and Photoshop are trademarks or registered
trademarks of Adobe Systems Incorporated in the U.S. and/or
other countries.
App Store, iBooks Store, and iTunes Match are service marks of
Apple Inc.
IOS is a trademark or registered trademark of Cisco in the U.S.
and other countries and is used under license.
019-2566/2013-09
ra
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Apple Inc. is under license.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Extract
Author                          : Apple Inc.
Create Date                     : 2013:08:20 15:56:36-07:00
Modify Date                     : 2013:08:20 16:04:45-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2013:08:20 16:04:45-07:00
Creator Tool                    : Adobe InDesign Server CS5.5 (7.5.3)
Format                          : application/pdf
Creator                         : Apple Inc.
Document ID                     : uuid:1ff7127c-2d44-b540-aecb-b5e4631cdbde
Instance ID                     : uuid:09071509-0eae-7442-a6cf-b0d56b4a4034
Producer                        : Adobe PDF Library 9.9
Page Count                      : 46

EXIF Metadata provided by EXIF.tools