Apple Power Mac G4 (Mirrored Drive Doors) Setting Up Your User Manual G4Dual SU

Setting Up Your Power Mac G4 (Mirrored Drive Doors) Setting Up Your Power Mac G4 (Mirrored Drive Doors)

User manual PowerMacG4DualSU Apple Mac Server G4 1.0 DP MDD user guide User Manuals and Instruction Guides

2002-08-13

User Manual: Apple Power Mac G4 (Mirrored Drive Doors) Power Mac G4 (Mirrored Drive Doors) - Setting Up

Open the PDF directly: View PDF .
Page Count: 132

Download
Open PDF In Browser	View PDF

Setting Up Your
Power Mac G4
Includes setup and expansion information
for Power Mac G4 computers

LL2044CR Page 2 Friday, July 19, 2002 10:13 AM

K Apple Computer, Inc.
© 2002 Apple Computer, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple.
The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the
“keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may
constitute trademark infringement and unfair competition in violation of federal and state laws.
Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for
printing or clerical errors.
Apple Computer, Inc.
1 Infinite Loop
Cupertino, CA 95014-2084
408-996-1010
www.apple.com
Apple, the Apple logo, AirPort, Apple Store, AppleShare, AppleTalk, Final Cut Pro, FireWire, the FireWire logo,
Keychain, Mac, Macintosh, Power Mac, QuickTime, and Sherlock are trademarks of Apple Computer, Inc., registered
in the U.S. and other countries.
DVD Studio Pro, Finder, iMovie, iPhoto, iPod, iTunes, and SuperDrive are trademarks of Apple Computer, Inc.
AppleCare is a service mark of Apple Computer, Inc.
Digital imagery copyright 2001 Photodisc, Inc.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in
the U.S. and other countries.
PowerPC and the PowerPC logo are trademarks of International Business Machines Corporation, used under
license therefrom.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. © 1992–1997 Dolby Laboratories, Inc. All rights reserved.
This product includes software developed by the University of California, Berkeley, and its contributors.
Other company and product names mentioned herein are trademarks of their respective companies. Mention of
third-party products is for informational purposes only and constitutes neither an endorsement nor a
recommendation. Apple assumes no responsibility with regard to the performance or use of these products.
Simultaneously published in the United States and Canada.
Sherlock’s Yellow Pages channel may be known by a different term outside the United States.

Contents
1

Setting Up

Positioning the Computer and Display 7
Plugging In the Computer 8
Need Help? 12
When You’re Not Using the Computer 13
Adjusting Your Display 13
Getting to Know Your Computer 14
Ports and Connectors—Expanding Your Computer’s Capabilities 16
Inside Your Power Mac—Your Computer’s Internal Expansion Options
What’s Next? 20
2

Getting Started With Your Computer

For the Latest Information 21
About Mac OS X 22
Sherlock—Your Internet Search Detective 24
.Mac—Internet Services for Mac Users 26
Apple.com—Your Starting Place on the World Wide Web 28
QuickTime—Audio and Video on the Internet 30
iPhoto—Import, Organize, Share, and Edit Your Digital Pictures
iMovie—Create and Edit Your Own Digital Movies 34
iDVD—Create and Burn Your Own DVDs 36
iTunes—Digital Music for Your Mac and iPod 38
Software Update—Keep Your Mac on the Cutting Edge 40
Multiple Users—One Mac for Many Users 42
Mac Help—Answers to Your Macintosh Questions 44

Working With Your Operating System

About Mac OS X 45
Using Classic in Mac OS X 46
Switching Between Operating Systems
Need Help? 47
4

Using Your Computer

Using Your Apple Pro Keyboard and Apple Pro Mouse 50
Connecting a Second Display to Your Computer 52
Using USB Devices 53
Using FireWire Devices 55
Using Your Optical Drive 57
Using Your Modem 60
Connecting to an Ethernet Network 60
Using AirPort Wireless Networking 63
Putting the Computer to Sleep to Save Energy 64
Attaching SCSI Devices to Your Computer 65
Transferring Information Between Two Macintosh Computers
Using the Computer as a Server Without a Monitor 66
5

Working Inside Your Computer

Opening the Computer 68
Installing Memory 71
Installing Internal Storage Devices 73
Installing a PCI Expansion Card or Replacing the AGP Card
Installing an AirPort Card 91
Replacing the Battery 92
6

Troubleshooting

Software Problems 97
Problems With Your Display 98
Restoring Your Computer’s Software
Appendix A
Specifications

Contents

101

100

Appendix B
Safety, Maintenance, and Ergonomics

107

Important Safety Information 107
General Maintenance 109
Important Ergonomic and Health-Related Information
Appendix C
Connecting to the Internet

110

113

Dialup (PPP) Connections 114
DSL, Cable Modem, or LAN Internet Connections
Troubleshooting Your Connection 122

117

Contents

C H A P T E R

1
1

Setting Up
Congratulations on purchasing your new Power Mac G4 computer. Your Power Mac G4 is a
full-featured computer that includes the latest in computer technology such as FireWire,
USB, support for AirPort wireless networking, and the latest Macintosh operating system,
Mac OS X. This chapter contains instructions for setting up your computer and display.

Positioning the Computer and Display
You can pick up the computer by any of its handles. If your monitor (or display) is heavy, be
sure to use correct lifting techniques when positioning it. Position the computer and display
so that
m they are on sturdy, flat surfaces
m the power cable connectors don’t press against a wall or other object
m nothing obstructs air flow behind or below the display or computer
m the computer’s optical drive trays have space to open in front
Important The only way to shut off power completely to your computer and display is to
disconnect their power plugs from the power source. Make sure the power cords for your
computer and display are within easy reach.

Plugging In the Computer
1

Plug the power cord firmly and completely into the recessed power socket marked with the
symbol ≤ on the back of the computer and plug the other end into a grounded outlet or
power strip.

Power cord socket

Power cord plug

Chapter 1

Connect your display cables according to the following illustration:
Depending on your monitor, you may have one or more cables to connect.
Check the instructions that came with the monitor for further setup information.
Important

USB ports

Monitor ports

Monitor cable

Your video card has these monitor ports:
m An Apple Display Connector (ADC) port to connect Apple flat-panel displays
m A Digital Visual Interface (DVI) port to connect digital displays that have
DVI connectors

ADC monitor port

DVI monitor port

m To connect a VGA monitor, use a DVI to VGA adapter (supplied with your computer) to
connect the monitor to the DVI port
m To connect a second ADC display, use a DVI to ADC adapter (not included) to connect the
display to the DVI port.
For more information about connecting a second display, see the guidelines in Chapter 4,
“Using Your Computer.”

Setting Up

If required, connect your computer to your Ethernet network or to your DSL or cable
modem; or connect your modem port to a phone line.

Ethernet port

Modem port

Chapter 1

Connect the keyboard cable to one of the USB ports ( ) on the computer or on your display.
Plug the mouse cable into a USB port on the keyboard.
Don’t put anything in the recessed speaker opening except the
optional speaker grille. Touching the
speaker can damage it.

USB ports on keyboard (2)

Keyboard

Mouse

Parts of your computer
may be covered by clear
plastic film that protected
it during shipment. You
can remove the film.

Setting Up

If you wish, raise the keyboard by lifting it and flipping the foot toward the back.

Turn on your computer by pressing the power button (®) on the front of the
computer. With some Apple displays, you can also turn on the computer using the
display’s power button.
m If your display must be turned on separately, turn it on by pressing its power button.

Need Help?
If you don’t see anything on your screen or you think your computer did not start up
properly, check these items:
m Is the computer plugged into a power source? If it is plugged into a power strip, is the
power strip turned on?
m Is the power cord securely plugged into the back of the computer?
m Are the keyboard and display cables connected correctly?
m Is the power button lit on the front panel of the computer and on the display? If not, the
computer or display isn’t receiving power or is off.
m Is the display turned on? Are the brightness and contrast controls on the display adjusted
correctly? If your display has brightness and contrast controls, adjust them.
m Restart your computer. Press and hold the computer’s power button for approximately
5 seconds until the computer turns off. Press it again to turn the computer on.
m If you see a blinking question mark on the screen or hear a series of beeps when you turn
on the computer, see Chapter 6, “Troubleshooting,” on page 95.

Chapter 1

When You’re Not Using the Computer
Your computer is set to go to sleep after a period of inactivity. Sleep is a state in which your
computer is on but uses very little power. To wake your computer from sleep, press any key.
You can also put the computer to sleep whenever you want, or set your computer so it never
goes to sleep. For more information on sleep, see “Putting the Computer to Sleep to Save
Energy” on page 64.
If you’re not going to use the computer for a few days, you should turn it off.
To turn off your computer, choose Shut Down from the Apple (K) menu.
Do not turn off the computer by turning off the switch on a power strip or by
pulling the computer’s power plug (unless you can’t turn off the computer any other way).
Your files or system software could be damaged if your computer is not shut down properly.

Important

Adjusting Your Display
To adjust the settings for your display, choose System Preferences from the Apple (K) menu
and click Displays.
For information about troubleshooting your display, see “Problems With Your Display” on
page 98. For information about maintaining your display, see “Maintaining Your Display” on
page 110. Additional information about using your display is available in Mac Help.

Setting Up

Getting to Know Your Computer

Speaker

Power button /
Status light

Headphone
jack

Optical drive

Optical bay

Media Eject key

Chapter 1

Speaker

Use the recessed internal speaker to hear sound from the computer. Take care not to let
anything touch the fragile speaker mechanism. To protect the speaker from damage, a
speaker grille is included with your computer. However, you’ll receive better sound quality
without the grille.

Power button/Status light

Press this button to turn on the computer or wake it from sleep. When the computer is on,
press the power button to put the computer to sleep. A white light indicates that the
computer is on. A pulsing light indicates the computer is in sleep. To restart your
computer, press and hold this button for approximately 5 seconds until the computer
turns off, then press it again to turn the computer on.
With some Apple displays, you can also touch or press the monitor’s power button to turn
the computer on or put it to sleep.

Headphone jack

Connect headphones to your Macintosh through the headphone jack.
Optical drive

Your computer may have a CD-RW drive, a Combo drive (DVD-ROM/CD-RW), or a
SuperDrive (DVD-R/CD-RW). All three kinds of drives can read CD-ROM discs, Photo CDs,
standard audio discs, and other kinds of media. The DVD-ROM/CD-RW drive and
SuperDrive can also read DVD discs and DVD movies and write music, documents, and
other digital files on CD-R and CD-RW discs. The SuperDrive can also write on blank DVD-R
discs. To open the optical drive, press the Media Eject (C) key on your Apple Pro Keyboard.
Optical bay

Add a second optical drive to store and back up information. To open the second optical
drive, press the Option key, then the Media Eject (C) key on your Apple Pro Keyboard.

Media Eject key

Use the Media Eject key on the Apple Pro Keyboard to open the optical drive and eject CD
and DVD discs.
With Mac OS X, you can also use the F12 key on some third-party keyboards to eject discs
and open the top optical drive. When a second optical drive is installed, use the F12 key
and the Option key to eject discs and open the drive.

Setting Up

Ports and Connectors—Expanding Your Computer’s Capabilities

DVI monitor port

ADC monitor port

Lockable cover latch

Access covers for
expansion slots

≤ Power socket
USB ports (2)

G Ethernet port
FireWire ports (2)

W Internal modem port
(on some models)

Apple speaker mini-jack

F Security lock port

Chapter 1

- Audio line-out port

√ Audio line-in port

Monitor ports

Connect your Macintosh to monitors that use an Apple Display Connector (ADC) or a
Digital Visual Interface (DVI) connector. You can also connect your Macintosh to monitors
that use a video graphics connector ( VGA) with the DVI to VGA adapter that came with
your computer.
USB ports

Connect your Macintosh to USB devices, such as keyboards, mouse devices, printers,
scanners, speakers, USB microphones, and USB hubs. Your display may also have USB
ports for connecting USB devices.
FireWire ports

Connect your Macintosh to FireWire devices, including digital video cameras, scanners, and
hard disk drives. FireWire provides a high-speed method of data transfer between them all.
Apple speaker mini-jack

Connect your Macintosh to high-fidelity Apple Pro speakers to play stereo music and
sound for multimedia, games, audio CDs, and more. See “Adjusting the Sound Volume” on
page 57 for information about using your speakers.

Security lock port and lockable cover latch

Attach a security lock to your Macintosh and to its back panel to secure the internal
components. When the lockable cover latch is pulled out, you can insert a security cable or
lock to prevent the computer cover from opening. See your computer products retailer for
security lock devices that will work with your computer.
Access covers for PCI expansion slots (4)

Expand your Macintosh by installing up to four Peripheral Component Interconnect (PCI)
cards in the covered slots, labeled 2, 3, 4, and 5. In some configurations, an Ultra160 lowvoltage differential (LVD) SCSI card is installed in one of these slots.

≤

Power socket

Connects to the computer’s power cord.

10/100/1000 twisted-pair Ethernet port

Connect your Macintosh to a high-speed Ethernet network to access the Internet or
network resources, such as printers and servers, and share information over the network.

Internal modem port

Connect a phone cord to the internal modem.

Audio line-out port

Connect externally powered speakers or audio devices to your Macintosh through the
audio line-out port.

√

Audio line-in port

Connect self-powered microphones and other audio equipment to your Macintosh
through the audio line-in port.

Setting Up

Inside Your Power Mac—Your Computer’s Internal Expansion Options

Optical drive carrier

Rear hard disk
drive carrier
(for ATA/100 drives)

DDR SDRAM slots (4)

Slot 1: AGP 4X slot
(graphics card installed)
Front hard disk
drive carrier
(for ATA/66 drives)

Battery

AirPort Card connector

Chapter 1

Slots 2–5: 33 MHz
PCI slots (4)
(64-bit, 33 MHz)

Optical drive carrier

Install a second optical drive in the lower section of the optical drive carrier inside your
computer.
Front hard disk drive carrier

Install additional hard disk drives in the front drive carrier inside your computer. You can
install up to two ATA/66 drives or up to two SCSI drives in the front carrier.
Battery

Your computer uses a battery that you rarely replace. If you find that your computer is having
trouble starting up, or that the system date and time are frequently incorrect, you may need
to replace the battery. For more information, see “Replacing the Battery” on page 92.
AirPort Card connector

Connect an AirPort Card, which allows your computer to communicate with a
wireless network.
Rear hard disk drive carrier

Install additional hard disk drives in the rear drive carrier inside your computer. You can
install up to two ATA/100 drives or up to two SCSI drives in the rear carrier.
DDR SDRAM slots

Expand your computer’s memory up to 2 GB. Add additional memory in your computer by
inserting up to 4 DDR SDRAM DIMMs in the memory slots.
AGP 4X graphics slot

Connect your monitor through the advanced graphics port (AGP 4X) card, which provides
fast graphics processing power. You can connect a monitor that has an Apple Display
Connector (ADC) or a Digital Visual Interface (DVI) connector.
PCI expansion slots

Install up to four 64-bit, 33 MHz PCI cards in slots 2 through 5 to expand your computer’s
capabilities.

Setting Up

What’s Next?
m To make connecting your new computer to the Internet easier, have the necessary
information from your Internet service provider handy and run the Setup Assistant when
you first start up your computer. For more information, see Appendix C, “Connecting to
the Internet.”
m For an overview of your computer’s software features, see Chapter 2, “Getting Started
With Your Computer,” on page 21.
m For information about your Macintosh operating systems, including instructions on how
to switch between Mac OS X and Mac OS 9, see Chapter 3, “Working With Your Operating
System,” on page 45.
m For more information about using your modem, connecting to a network, or using the
computer’s other hardware features, see Chapter 4, “Using Your Computer,” on page 49.
m For information about installing additional drives, memory, or PCI cards or changing the
computer’s battery, see Chapter 5, “Working Inside Your Computer,” on page 67.
m To register your new computer with Apple, use the Setup Assistant. You can also
register your computer, Apple display, or Apple software on the Apple website at
www.apple.com/register

Chapter 1

C H A P T E R

2
2

Getting Started With Your Computer
If you’re eager to get started and want to try out a few things, this chapter is for you. It
provides an overview of your computer’s software features along with the unique Internet
services available to Mac owners.
Your computer comes with two Macintosh operating systems installed: Mac OS X and
Mac OS 9. Your computer is set to start up in Mac OS X, but you can set it to start up in the
Mac OS you prefer, and then easily switch between the two. For instructions on how to
switch your startup Mac OS, or for more information about the operating systems on your
computer, see Chapter 3, “Working With Your Operating System,” on page 45.
Mac OS X includes powerful features that you can use to connect to the Internet to watch
video, research information, shop, and even update your software automatically. With your
Power Mac G4, you also get some of the latest Apple software for creating multimedia
masterpieces. Use Mac OS X and iPhoto to import, organize, edit, and share your digital
photos. Connect your digital video camera and create your own desktop movies with iMovie,
create a DVD of several iMovies and digital photos using iDVD (if you have a SuperDrive), or
play music files with iTunes.
Apple also provides Internet services that give you storage space on the Internet, a personal
Mac.com email address, tools to easily create your own website or iMovie theater, and more.
Note: Because Apple frequently releases new versions and updates to its system software,
applications, and Internet site, images shown in this manual may be slightly different from
what you see on your screen.

For the Latest Information
The Apple website links you to technical support, the latest Apple news, free downloads, and
online catalogs of software and hardware for your Mac at www.apple.com
You can also find the manuals for many Apple products on the AppleCare Service and
Support website at www.apple.com/support

About Mac OS X

Apple menu

Status icons

Use this to
change settings,
open recently
used items, and
shut down your
computer.

Check the
status of system
preferences from
the menu bar.
Finder toolbar
Click to open
folders, files, and
shortcuts to
places on your
computer.

Sheet
Sheets for
saving and printing
are attached to
document
windows.

Window with
buttons
Click a button to
close the window,
minimize it in
the Dock, or
enlarge it.

Button
If a button pulses,
you can press the
Enter or Return
key instead of
clicking it.

Dock
Click an icon in the Dock to open
that item or make it active. Some
icons in the Dock indicate the
status of an application.

Chapter 2

What You Can Do

Mac OS X provides a powerful and elegant new user interface for your computer. With
Mac OS X, you don’t need to worry about the amount of memory to allot for an application
to run efficiently, or restarting your computer if something goes wrong with an application.
In addition to using Mac OS X software, you can still run Mac OS 9 versions of software
in Mac OS X using the Classic environment. Chapter 3, “Working With Your Operating
System,” on page 45 explains Classic in more detail. Mac OS X also supports Java and
UNIX-based software.
To Get Started

System Preferences is your command center for all of your computer settings, from changing
the appearance of your desktop to setting up network access information. The Finder and
Dock provide easy access to folders, applications, documents, and other items on your
computer and network.
For details on the features of Mac OS X, see the Welcome to Mac OS X book that came with
your computer or choose Mac Help from the Help menu in Mac OS X.
Tips and Tricks
Personalize the Finder

Select a picture or color for your desktop by choosing System Preferences from the Apple (K)
menu and clicking Desktop. You can drag an image to the well or choose one from the Apple
Background Images collection.
You can also select and rearrange the items that appear in the toolbar in Finder windows.
Choose Customize Toolbar from the View menu and drag items to the toolbar.
Personalize the Dock

You can change the size of the Dock icons and turn on magnification so that the icons under
your pointer become larger than the rest of the Dock. Choose Dock from the Apple (K) menu,
then choose Dock Preferences. You can also open System Preferences from the Apple (K)
menu and click Dock.
Keep your desktop organized

Reduce the clutter on your desktop by minimizing open windows, which puts them in the
Dock. Double-click a window’s title bar or click the middle button in the top-left corner of
the window to put it in the Dock. Click the window’s icon in the Dock to open it again.
To Learn More

For instructions on how to customize your Mac OS X environment and for more information
about using Mac OS X, see the Welcome to Mac OS X book that came with your computer.

Getting Started With Your Computer

Sherlock—Your Internet Search Detective

Sherlock
channels
Use the yellow
pages channel to
search for businesses
in your location.
Directions
Sherlock displays
driving directions
and maps to the
business you choose.

Chapter 2

Search button
After you type what
you are looking for,
click this button to
start the search.

LL2044GS Page 25 Friday, July 19, 2002 10:25 AM

What You Can Do

Sherlock is your search detective and personal shopper on the Internet. It provides an easy
way to find people, news, and just about anything. Shop for books and music, search auction
sites, find the best prices—even check product availability. Use the Movie channel to search
for movies in your local theaters, watch movie trailers, and buy tickets.
To Get Started
1

Connect to the Internet.

Open Sherlock by clicking the Sherlock icon in the Dock.

Select a Sherlock channel.

Type what you are looking for and click the Search button.
Tips and Tricks
Add locations in Sherlock Preferences

Some information in the channels may change based on the location you are searching from.
To add a location to Sherlock:
1

Choose Preferences from the Sherlock menu.

Click Add and give the new location a name and address.
To Learn More

To learn more about what you can do with Sherlock, open Mac Help and search for
“Sherlock.” To download additional search plug-ins and find out how you can create your
own Sherlock plug-in, go to the Sherlock website at www.apple.com/sherlock
Note: Sherlock’s Yellow Pages channel may be known by a different term outside the
United States.

Getting Started With Your Computer

.Mac—Internet Services for Mac Users

Chapter 2

iCards

Get your own Mac.com email address.
It’s easy, and it works with your favorite
email programs.

Send an elegant iCard just right for any
occasion. Choose a ready-made photo
or create a personalized iCard using
photos on your iDisk.

iDisk

HomePage

Your own storage on Apple’s Internet
server. Share photos, movies, and other
files over the Internet. Purchase additional
storage space.

Build a personal website in three easy
steps. Create a photo album, publish an
iMovie, post your résumé, and more.
Now anyone can view your page on the
Internet.

What You Can Do

.Mac is a suite of Internet services from Apple created exclusively for Mac users. With .Mac,
you can send email or greeting cards to your friends, make the Internet safer for your
children, and share photos and movies. You can even create your own website.
To Get Started
1

Connect to the Internet.

Go to www.apple.com

Click the .Mac tab and then click the Sign Up button.
Tips and Tricks
Upload pictures to your iDisk to create custom iCards

You can send iCards with your own custom pictures. Save your images as GIF or JPEG files
and then copy them to the Pictures folder on your iDisk. Your images will appear as picture
choices when you create an iCard in the Create Your Own section.
Start with a HomePage template to create your own web page in minutes

HomePage has web page templates that you can modify with your own text and images.
For example, teachers can use the HomePage education templates to post recent class news,
homework assignments, and other information for parents. You can also use the HomePage
photo album and iMovie templates to share your pictures and movies easily with your friends
and family.
Create an alias of your iDisk for easy access

Instead of using a web browser to open your iDisk, choose iDisk from the Go menu. You can
also add an iDisk icon to the Finder toolbar. Choose Customize Toolbar from the View menu,
then drag the iDisk icon to the Finder toolbar and click Done.
Use .Mac to control access by other users

Set up your computer so that each member of the family can log in. See “Multiple Users—
One Mac for Many Users” on page 42 for information about setting up your computer for
several users.

Getting Started With Your Computer

Apple.com—Your Starting Place on the World Wide Web

Macintosh
Products Guide
www.apple.com/guide
For great hardware and software
products for your Mac, check
this website or look for
the Mac symbol.

Apple Software
www.apple.com/software
Search by category for Apple
software for your Mac.

The Apple Store
store.apple.com
Purchase the latest
Apple hardware, software,
and accessories.

Chapter 2

Mac OS X
www.apple.com/macosx
Get the latest on the world’s most
advanced operating system.

Apple Hot News
www.apple.com/hotnews
Find information on the latest
software updates for your Mac,
third-party software, QuickTime
Hot Picks, and information on
the next big Apple event.

Apple Support
www.apple.com/support
Find information about the
AppleCare Protection Plan,
training programs, and other
product support. Also access
software updates, the
Apple Knowledge Base, and
technical information.

Getting Started With Your Computer

QuickTime—Audio and Video on the Internet

QuickTime
Channels
Click Hot Picks
and then click the
movie screen.

Volume control

Chapter 2

QuickTime
Content Guide
Click the button
to view the
QuickTime topics
you can access.
Click a topic on
the left and then
click the window
on the right.

What You Can Do

In addition to playing video and music files on your Mac, with QuickTime you can watch live
and recorded Internet broadcasts.
To Get Started
1

Connect to the Internet.

Open QuickTime Player by clicking the QuickTime Player icon in the Dock. You can also
double-click QuickTime Player in the Applications folder.

Click the QuickTime button and select a channel to get the latest video, music, and
information over the Internet without having to store files on your hard disk.
You can add QuickTime movies to your QuickTime Favorites by choosing Add Movie As
Favorite from the Favorites menu.
Tips and Tricks
Upgrade to QuickTime Pro to do the following:

m
m
m
m

Play back full-screen video and resize movies.
Create streaming movies.
Work with more than 30 audio, video, and image formats, including Flash.
Create, open, edit, and save movies and audio as easily as copying and pasting.

To Learn More

Internet video is just one of the things you can do with QuickTime. To learn more, start with
QuickTime Help. To download additional channels or find information on setting up your
own Internet streaming server, go to the QuickTime website at www.apple.com/quicktime

Getting Started With Your Computer

iPhoto—Import, Organize, Share, and Edit Your Digital Pictures

Slide show
Watch your
photographs
in a full screen
slideshow with
your favorite
music.
Edit
Crop or rotate
photos. Remove
red-eye or convert
them to black
and white.

New album
Organize your
photos into
digital albums for
easy retrieval.
Import
Import digital photos into
iPhoto directly from your
digital camera.

Chapter 2

Organize

Arrange your
photos by date,
title, or keyword.

Print photos on your
ink jet printer. Order
prints online. Create
and present an
onscreen slideshow.

What You Can Do

iPhoto lets you import pictures from your digital camera, organize them into albums, edit
and enhance them, and share them in a number of different ways. Once you see what iPhoto
can do with digital pictures, you may never go back to using a film camera again.
To Get Started

Plug your camera into the USB port on your Macintosh. iPhoto opens, imports your photos,
and displays them on your screen.
Tips and Tricks
Resize thumbnails

Drag the size control in the iPhoto window, and your photo thumbnails grow or shrink for
easier viewing. You can view individual shots in greater detail, see hundreds of thumbnails at
once, or quickly scroll through your photos to find the one you’re looking for.
Create albums for your favorite photos

iPhoto lets you easily organize your photographs into digital albums—birthday, vacation,
wedding, whatever—for easy retrieval. (If you’re familiar with iTunes, think playlists for
pictures.) Sharing and enjoying them is easy, too: click a button to see them in a full-screen
slideshow, accompanied by your favorite music. Email them to friends. Print them on your
ink jet printer. Or order prints over the Internet.
Create your own books

Create custom books with your own pictures and words. It’s easy to create an album and
select a book theme and a layout you like. Add titles and text to tell your story or describe
your pictures. Print your book pages on your printer. iPhoto makes it simple to turn your
book into a beautiful keepsake.
Built exclusively for Mac OS X

Harnessing the power of the world’s most advanced operating system, Mac OS X, iPhoto lets
you manipulate high-resolution images quickly. Built-in color management ensures
consistent color from photo to web to print. And convenient Internet tools and services
make it easy to share your photos with others.
To Learn More

For more information on using iPhoto, see iPhoto Help or go to the iPhoto website at
www.apple.com/iphoto

Getting Started With Your Computer

iMovie—Create and Edit Your Own Digital Movies

iMovie monitor
Preview your
movie or view
video directly from
a connected DV
camcorder.

Shelf
To make clips part
of your movie after
you import them,
drag them from
the shelf to the
clip viewer.

Mode switch
Use this to
switch between
importing from
a camcorder
and editing.

Editing
buttons

Clip viewer
Timeline
viewer
The clip viewer
and the timeline
viewer are
visual aids for
assembling and
editing your
movie.

Playback controls

Scrubber bar

Use these to play the
movie in the iMovie
monitor.

Use this to select
sections of video.

Video track
Lets you work
with audio
contained in
video clips.

Chapter 2

Audio tracks

Playhead

Lets you work with
recordings, music, and
sound effects.

Represents the
location of the frame
showing in the iMovie
monitor. Move the
playhead to see
where things appear
in a movie.

Click these to
open panels for
adjusting and
selecting sounds,
video effects,
titles (text), and
transitions. Click
the Clips button to
see the shelf.

What You Can Do

iMovie is an easy-to-use digital video editing software application. With iMovie and a digital
video camcorder, you can create and edit your own movies. Import video from the camera;
edit clips; and add transitions, titles, sound effects, and music. Then copy the movie to a
camcorder tape or create a QuickTime movie. You can even share your QuickTime movies by
placing them on the web on your Apple iDisk or HomePage.
Your computer comes with iMovie for Mac OS X and Mac OS 9.
To Get Started
1

Shoot your video, then connect the camera to your computer’s FireWire port.

Open iMovie in the iMovie folder (located in the Applications folder).

Click the Import button to import movie clips to the shelf, then add them to your movie by
dragging them to the clip viewer.

Assemble and edit your movie in the clip viewer and timeline viewer.

Add transitions, titles, sound, and music.

When you are finished, choose Export from the File menu.
Tips and Tricks
Share your desktop iMovie with your friends and family

Export your movie as a QuickTime web movie and copy the movie to your iDisk. Then
use HomePage to create your own iMovie theater so that others can view your movie on
the Internet.
To Learn More

For more information on using iMovie, see the iMovie Tutorial or iMovie Help. For the
latest on iMovie, including iMovie updates, additional plug-ins, and a list of compatible
DV camcorders, go to the iMovie website at www.apple.com/imovie

Getting Started With Your Computer

iDVD—Create and Burn Your Own DVDs

Themes

Movies

Choose a
background
for your DVD
from the
included themes,
or customize
your own theme.

To add a movie,
simply drag it
to iDVD. You can
use movies you
created in iMovie.

Burn
Multiple
menus

Insert a DVD-R
disc and click
Burn. You can
work on your
computer while
the DVD is being
created in the
background.

Click the Folder
button to
add multiple
DVD menus.

Slideshow
Click Slideshow and
drag still pictures to
iDVD. Your DVD can
hold thousands of
pictures.

Chapter 2

Preview
Click Preview to
see what your
DVD will look like.

What You Can Do

If your Power Mac G4 came with a SuperDrive, you can use iDVD to burn DVDs on blank
DVD-R discs. You can turn your iMovies, digital photos, and other QuickTime media files into
DVDs that can be played on most standard DVD players.
To Get Started
1

If you are using iMovie or Final Cut Pro, export your movies as QuickTime movies.
See iDVD Help for instructions on preparing your movies to work with iDVD.

Open the iDVD application in the iDVD folder (located in the Applications folder).

Assemble your DVD. Drag your movie files from the Finder to the iDVD window.

Click Theme and choose a design for your DVD.

Preview your iDVD using the preview remote.

When you are ready to burn your DVD, click the Burn button.
Tips and Tricks
Customize the design of your DVD

You can design the look and feel of your DVD by choosing from the iDVD themes or by
importing your own pictures. You can create a custom button image or background simply by
dragging images onto a button or into the background. Click Theme to further customize
other design elements of your DVD, such as button shapes, title styles, and button label text.
To Learn More

For more information on using iDVD, including where you can buy DVD-R discs, see iDVD
Help or go to the iDVD website at www.apple.com/idvd

Getting Started With Your Computer

iTunes—Digital Music for Your Mac and iPod

Library

Type some text and
iTunes lists songs
that match.

Your collection of
songs, imported
from your own audio
CDs or downloaded
from the Internet.
Easily browse or
search for music.

Playlists
Make personalized
playlists using
songs from your
Library. Arrange
your music by
mood, artist,
genre, or
however you like.

iPod
Sync with your iPod
and automatically
update songs
and playlists.

Eject CD
button

Radio Tuner
Choose from
hundreds
of Internet radio
stations—jazz, rock,
talk, and more.

Chapter 2

Audio CDs
Play an audio CD on your
computer. Import songs to
your library to play them
without the CD.

Equalizer
Adjust the sound
to your tastes using
the 10-band EQ.

Visuals button
Have iTunes display a stunning
light show that changes, throbs,
and pulses to the beat of your
music. Enjoy different colors
and patterns every time you
listen to a song.

What You Can Do

iTunes lets you import songs from music CDs as MP3 files, create playlists, move music to
your iPod portable MP3 player, and listen to hundreds of radio stations on the Internet.
To Get Started
1

Open iTunes (located in the Applications folder on your hard disk).

Insert a music CD into your optical drive.

Click the checkbox next to the songs you want to import.

Click the Import button. Your songs are converted into MP3 files and stored in your iTunes
library.
Tips and Tricks
Create playlists for your favorite sets of songs

iTunes lets you create playlists from songs in your library. A playlist is a list of songs in a
specific order. Use your playlists to program your music for specific moods, artists, or
themes. Click the New Playlist button and drag songs from your library to the playlist.
Resize the iTunes window or access iTunes from the Control Strip

You can collapse the iTunes window to show just the playback controls and status. Click the
zoom button, the right-most button in the upper-left corner. You can also access iTunes
controls from the Dock in Mac OS X or the iTunes Control Strip module in Mac OS 9.
Look up CD information from the CDDB

iTunes automatically connects to the CD database (CDDB) on the Internet to look up the
name of the album, song titles, and other information about your music CD. If you are not
connected to the Internet, you can look up information on songs you imported the next time
you connect. Select the song and choose Get CD Track Names from the Advanced menu.
To Learn More

For more information on using iTunes, see iTunes Help or go to the iTunes website at
www.apple.com/itunes

Getting Started With Your Computer

Software Update—Keep Your Mac on the Cutting Edge

Update software
Set how often your computer
checks for software updates
from Apple.

Check Now
Click to check instantly for
updates available for your Apple
software. Select the Apple
software you want to update
from the list that appears.

Chapter 2

What You Can Do

Use Software Update to automatically download and install the latest system software
updates, drivers, and other enhancements from Apple. Use Software Update to instantly
check Apple’s Internet servers to see if any updates are available for your Apple software. You
can even set your Mac to check the Apple server periodically and download and install
updated software for you.
To Get Started
1

Connect to the Internet.

Open System Preferences and click Software Update.

Click Update Now, then select the software updates you want and click Install.
Tips and Tricks
Adjust your Software Update schedule

If you have an Internet connection that is always on, you can set a schedule for your
computer so that it checks for software updates at a certain time on specific days of the
week. If you have a dialup connection and you are not connected, Software Update will
check the next time you connect.
To Learn More

For more information on using Software Update, search for “Software Update” in
Mac Help. For the latest information on the Mac OS, go to the Mac OS website at
www.apple.com/macos

Getting Started With Your Computer

LL2215GS Page 42 Friday, July 19, 2002 2:22 PM

Multiple Users—One Mac for Many Users

Accounts
Use the Accounts pane
in System Preferences to
add user accounts.

Home
Each user has a home.
Finder, Dock, Mail, and
other preferences are
kept for each user in the
user’s home, so users can
customize Mac OS X
the way they want.

Chapter 2

Shared folder
To give access to the
Shared folder, a user can
turn on file sharing in
Sharing preferences.

What You Can Do

Several people can share a single computer by logging in to their individual user accounts.
Users can select their own customized settings, such as bookmarks and desktop views, and
access a private storage space, called “Home.” Users sharing the computer also have access
to a common Shared folder.
The first user account created on your computer is designated an administrator.
Administrators are users with special privileges: they can give new users access to the
computer, install software, and change general computer settings.
Note: If you forget the administrator password, you can reset it using the Mac OS X CD.
Start up from the Mac OS X CD and choose Reset Password from the Installer menu. Because
a user with the Mac OS X CD can gain unrestricted access to the computer, you should keep
the CD in a safe place.
To Get Started
1

Create a new user by choosing System Preferences from the Apple (K) menu, clicking
Accounts, then clicking New User.

Edit the user’s information. You can give a user administrative privileges.

Close the window.
Tips and Tricks
Keeping your computer secure

You can require a password to access the computer after the screen saver appears in case
users log in and leave the computer unattended. Open System Preferences, click Screen
Effects, and click Activation to select the period of inactivity before the screen saver starts.
Then select “Use my user account password.”
Set up user privileges

In Mac OS X, administrators can specify the documents and applications that users can
access and configure overall settings. Open System Preferences, click Accounts, and click
Capabilities.
To Learn More

For more information on setting up user accounts in Mac OS X, search for “users” in
Mac Help.

Getting Started With Your Computer

LL2215GS Page 44 Friday, July 19, 2002 11:01 AM

Mac Help—Answers to Your Macintosh Questions

Help drawer

Type your question
here and press the
Return key.

Available Help is
displayed in the drawer.

Help Center
Click here to see
the help available
on your computer.

Search results
Topics are
displayed in order
of relevance.

Topic summary
Find out more about a help
topic before viewing it.

Chapter 2

C H A P T E R

3
3

Working With Your Operating System
An operating system, or OS, is your computer’s desktop environment that defines how the
items on your desktop are represented and how you interact with them. Each OS has a
different look and feel.

About Mac OS X
Your computer is set to start up in Mac OS X so you can use its advanced technologies, such
as the elegant user interface, incredible graphics capabilities, and added system stability and
performance. Mac OS X takes care of managing your computer processes so you can
concentrate on what you want to do. You don’t need to worry about restarting your
computer if something goes wrong with one software application. Mac OS X shuts down just
that application so you can keep working without interruption. The Mac OS X virtual
memory manager takes care of allotting the amount of memory your software applications
need to run efficiently.
When you’re ready to learn more about Mac OS X, read the Welcome to Mac OS X book that
came with your computer. Welcome to Mac OS X introduces the features of Mac OS X and
provides tips for Mac OS 9 users on how to use Mac OS X to perform common Mac OS 9
tasks. If you experience any problems while learning about Mac OS X, see the troubleshooting
tips in the back of the Welcome to Mac OS X book or choose Mac Help from the Help menu
in Mac OS X.
Because Mac OS X is already installed on your computer, you don’t need to
follow the installation instructions in Welcome to Mac OS X. Instead, follow the instructions
in Welcome to Mac OS X to log in and begin using Mac OS X.

Important

Information About Software and Mac OS X

For information about the compatibility of software applications with Mac OS X, or to read
more about Mac OS X, check the Apple website: guide.apple.com/macosx/

Using Classic in Mac OS X
In addition to using Mac OS X applications, you can continue to use Mac OS 9 applications in
the special Classic environment. Classic works in the background to access Mac OS 9 features
and software applications. When you start up Classic, Mac OS 9 software works in Mac OS X
just as it does in Mac OS 9, but doesn’t benefit from Mac OS X features such as the look of
the new interface. Simply open a Mac OS 9 application or double-click a document created in
a Mac OS 9 application. If Classic isn’t running, it starts up.
After the Classic environment starts up, Classic continues to run in the background, even if
you quit all Mac OS 9 applications, so Classic applications and documents open faster the
next time. You can set your computer to start up Classic automatically when you log in to
Mac OS X. Choose System Preferences from the Apple (K) menu, click Classic, and select
“Start Classic when you log in.”
To quit the Classic environment, click Stop in the Classic pane of System Preferences. You can
save any unsaved changes to your Classic documents and quit Classic.
Do not remove the Mac OS 9 operating system from your computer. For Classic
to work, Mac OS 9 must be installed.
Important

Switching Between Operating Systems
Some tasks and software applications have not yet been optimized to work with Mac OS X or
Classic and perform best in Mac OS 9. You can set your computer to start up in Mac OS 9 and
change the Mac OS your computer uses when it starts up as often as you like.
To set your computer to start up in Mac OS 9 instead of Mac OS X:

Chapter 3

In Mac OS X, choose System Preferences from the Apple (K) menu and click Startup Disk.

Select the Mac OS 9 folder as your startup System Folder. (If the icons are dimmed, click the
lock icon at the bottom of the pane and type the administrator user name and password that
you created in the Setup Assistant. See Welcome to Mac OS X for more information about
logging in as an administrator.)

Restart your computer.
Note: Because Apple frequently releases new versions and updates to its system software,
the version number of the Mac OS X and Mac OS 9 operating systems in this manual may be
different from those installed on your computer.
To set your computer to start up in Mac OS X instead of Mac OS 9:

In Mac OS 9, choose Control Panels from the Apple (K) menu, then choose Startup Disk.

In the Startup Disk control panel, double-click the hard disk that contains your operating
systems and select the Mac OS X System folder as your startup disk. You can click the triangle
to the left of the hard disk icon to see the System folders installed on it.

Restart your computer.

Note: Because Apple frequently releases new versions and updates to its system software,
the version number of the Mac OS X and Mac OS 9 operating systems in this manual may be
different from those installed on your computer.

Need Help?
For more information about the features of your Macintosh, choose Mac Help from the Help
menu and click any of the blue underlined text. You can also type a question in the Search
field and press Return on the keyboard.

Working With Your Operating System

C H A P T E R

4
4

Using Your Computer
This chapter provides explanations and instructions for using the important features of your
Power Mac G4 computer, including your keyboard and mouse, modem, FireWire ports, USB
ports, and networking.
Explanations are provided for
m “Using Your Apple Pro Keyboard and Apple Pro Mouse” on page 50
m “Connecting a Second Display to Your Computer” on page 52
m “Using USB Devices” on page 53
m “Using FireWire Devices” on page 55
m “Using Your Optical Drive” on page 57
m “Using Your Modem” on page 60
m “Connecting to an Ethernet Network” on page 60
m “Using AirPort Wireless Networking” on page 63
m “Putting the Computer to Sleep to Save Energy” on page 64
m “Attaching SCSI Devices to Your Computer” on page 65
m “Transferring Information Between Two Macintosh Computers” on page 65
m “Using the Computer as a Server Without a Monitor” on page 66

Using Your Apple Pro Keyboard and Apple Pro Mouse
Your Apple Pro Keyboard comes with function keys preset for common tasks. Use the Media
Eject key to eject optical discs from the top optical drive. When a second optical drive is
installed, use the Media Eject key and the Option key to eject media from that drive. Press
the Volume Up or Volume Down keys to adjust the sound level, or press the Mute key to turn
sound off. You can also adjust an Apple display’s level of brightness with the Brightness Up
and Brightness Down keys.
Media Eject key

—
-

Mute key
Volume Up key
Volume Down key
Brightness Up key
Brightness Down key
Function keys

Note: When you’re using a non-Apple keyboard with your computer in Mac OS X, use the
F12 key to eject optical discs from the top optical drive. Use the F12 key and the Option key
to eject media from a second optical drive.
Customizing Function Keys (Mac OS 9)

In Mac OS 9, you can set unassigned function keys (F7–F12) on your Apple Pro Keyboard to
open applications such as your Web browser, email program, or frequently used documents.
Once applications are open, you can use the customized function keys to switch quickly
between them.
The first time you press an unassigned function key, a dialog box appears that lets you assign
any of the function keys to an application or document. You can change the application
assigned to a function key using the Keyboard control panel.
Note: You can’t customize function keys in Mac OS X.

Chapter 4

Using Your Apple Pro Mouse

To position the pointer using your mouse, move the mouse over any suitable surface such as
your desktop, mouse pad, or other textured surface. (Some smooth, glassy surfaces provide
less pointer control than others.) To click an object, press down once on the mouse body
until you feel a click. To double-click an item, press down twice in quick succession.
If you run out of room and want to
keep the mouse clicked while you
lift it, click the mouse, then squeeze
the sides with your thumb and
fingers as you lift.

You can adjust the feel of your mouse by turning the dial underneath. Turning the dial one
direction makes the feel of clicking the mouse stiffer; turning it the other way makes clicking
the mouse easier.
Turn the ring on the bottom of the mouse to “+” for more
tension, “O” for medium tension, and “– ” for less tension.

For More Information About Your Keyboard and Mouse

Additional information on configuring the keyboard controls and customizable function
keys is available in Mac Help. Choose Mac Help from the Help menu and search for
“keyboard” or “mouse.”

Using Your Computer

Connecting a Second Display to Your Computer
You can connect two displays to your graphics card and use both displays at the same time.
When a second display is connected, you can either have the same image appear on both
displays (known as mirroring) or use the second display to extend the size of the Mac OS
desktop (known as extended desktop mode). You need a video cable for each display you
want to connect.
To use multiple displays:
1

Turn off the displays and shut down your computer.

Connect the video cable from each display to the appropriate port on the graphics card.

Turn on the displays and start up your computer.
To adjust the displays, choose System Preferences from the Apple menu and click Displays.
For optimal mirroring performance, set both displays to the same resolution
and color depth.
Important

By default, your computer starts up in extended desktop mode. To work in video mirroring
mode, choose Video Mirroring from the Displays status menu in the menu bar in Mac OS X.
For More Information on Displays

For information about connecting your display, see the setup instructions in Chapter 1,
“Setting Up.”
Additional information on using and configuring an external display is available in Mac Help.
Choose Mac Help from the Help menu and search for “display.”

Chapter 4

Using USB Devices
Your Power Mac G4 comes with two USB ports on the rear panel, and your Apple Pro
Keyboard also has two USB ports. You can use your USB ports to connect many types of
external devices, including printers, digital cameras, microphones, game pads, joysticks,
keyboards, mouse devices, and storage devices. USB makes it easy to connect external
equipment. Once you connect the device, it is ready to use. You don’t need to restart
your computer.

USB ports (2)

To use a USB device with your computer, connect the device to the computer and install its
software or configure your computer to work with the device. From then on, your computer
automatically loads the correct software whenever you attach the device.
Note: Apple has already included software to work with many USB devices. In most cases,
you do not need to install the software that came with the device. If, when you connect a
USB device, your Power Mac G4 cannot find the correct software, install the software that
came with the device or download it from the manufacturer’s website.

Using Your Computer

Connecting Multiple USB Devices

Your Power Mac G4 has two USB ports on the rear panel. Your keyboard or monitor may also
have ports that you can use to connect devices. If you want to connect more devices, you can
purchase a USB hub. The USB hub connects to an open port on your computer and provides
additional USB ports (usually four or seven).

USB hub

For More Information on USB

Additional information on USB is available in Mac Help. Choose Mac Help from the Help
menu and search for “USB.” You can also find information on Apple’s USB website at
www.apple.com/usb
For information on USB devices available for your computer, go to the Macintosh Products
Guide at www.apple.com/guide

Chapter 4

Using FireWire Devices
FireWire is a high-speed data transfer system that lets you easily connect and disconnect
external devices—such as digital video (DV ) cameras, printers, scanners, and hard disk
drives. You can connect and disconnect FireWire devices without restarting your computer.
Your computer includes two external FireWire ports on the rear panel, which support a
maximum data rate of up to 400 megabits per second (Mbps).

FireWire ports (2)

With FireWire you can do the following:
m Connect a digital video camera and capture or transfer high-quality video directly to or
from your computer. Then use video-editing software such as Apple’s iMovie to edit
the video.
m Connect an external FireWire hard disk drive to back up data or transfer files. If you have
installed software for your FireWire hard disk drive, the FireWire disk icon appears on
your desktop after you connect the hard disk drive to your Power Mac G4. Some FireWire
hard disk drives get their power through the FireWire cable, so you don’t need to connect
an external power supply.
m If you have a problem with your computer that prevents you from starting up or you
want to transfer files, you can use FireWire to connect your Power Mac G4 to another
computer so that your Power Mac G4 appears as an external hard disk on the other
computer (a feature known as FireWire target disk mode). See “FireWire Target Disk
Mode” on page 56 for more information.
To use a FireWire device, connect the device to the computer and install any software that
came with the device. Your computer automatically detects when you attach a new device.

Using Your Computer

To start up from a FireWire hard disk that has the Mac OS on it, choose System Preferences
from the Apple (K) menu, click Startup Disk, then select the FireWire hard disk as the
startup disk.
If your FireWire hard disk doesn’t appear or can’t be selected, consult the FireWire hard disk
vendor for updated software drivers.
To disconnect your FireWire hard disk safely, drag its icon to the Trash before disconnecting
the FireWire cable.
FireWire Target Disk Mode

You can use FireWire to connect your Power Mac G4 to another computer and then have it
appear as an external hard disk on that computer. You can then share or transfer files.
Note: If the computer to which you connect your Power Mac G4 is running Mac OS 9, it
must have FireWire version 2.3.3 or later installed. Use Apple System Profiler (located in the
Utilities folder, in your computer’s Applications folder) to check the version of FireWire
installed. If you have an older version, check for an update at the Apple FireWire website at
www.apple.com/firewire
To connect your Power Mac G4 in FireWire target disk mode, follow these steps:
1

Shut down your Power Mac G4.

Use a FireWire cable with the appropriate 6-pin connector on each end to connect your
computer to another FireWire-equipped computer.

Start up your Power Mac G4 and immediately hold down the T key.
Your Power Mac G4 display shows the FireWire disk mode indicator, and the Power Mac G4
internal hard disk icon appears on the desktop of the other computer.

When you are finished transferring files, drag the Power Mac G4 hard disk icon to the Trash
to unmount the drive.

Press the power button on the Power Mac G4 to shut it down and then disconnect the
FireWire cable.
For More Information on FireWire

Additional information on FireWire, including setting up FireWire devices, is available in Mac
Help. Choose Mac Help from the Help menu, and search for “FireWire.” You can also find
information on Apple’s FireWire website at www.apple.com/firewire
For information on the FireWire devices available for your computer, go to the Macintosh
Products Guide at www.apple.com/guide

Chapter 4

Using Your Optical Drive
You can install or run software from CDs using your optical drive. You can play multimedia on
CD discs and music from audio CDs. Your optical drive can also write music, documents, and
other digital files on CD-R and CD-RW discs. If you have a Combo drive (DVD-ROM/CD-RW )
or a SuperDrive (DVD-R/CD-RW ), you can also play DVD movies and use most DVD discs.
SuperDrives can also record information on blank DVD-R (recordable DVD) discs.
Note: If you have older software that comes on floppy disks, contact the software
manufacturer to see if the software is available on a CD or purchase an external USB
floppy disk drive for your Power Mac G4 from your Apple dealer or the Apple Store
(www.apple.com/store).
Inserting a Disc

To install or use programs from a CD or DVD, follow these steps:
1

With the computer turned on, press the Media Eject (C) key on your Apple Pro Keyboard to
open the drive.

Place a disc in the tray, with the label facing up, and make sure the disc is lying flat.

Press the Media Eject (C) key again or gently push the tray in to close it.
When the icon for the disc appears on the screen, the disc is ready to use.
Ejecting a Disc

You can eject a disc by dragging the disc icon to the Trash, or by pressing the Media Eject (C)
key on your Apple Pro Keyboard. When a second optical drive is installed, you can eject a disc
from it by pressing the Option key and the Media Eject (C) key. You can also eject a disc by
holding down the mouse button while restarting your computer.
Adjusting the Sound Volume

To adjust the sound volume, repeatedly press the volume keys (-, –) on your keyboard.
You can also adjust speaker volume and balance from your computer by choosing System
Preferences from the Apple (K) menu and clicking Sound.

Using Your Computer

Recording Information on a CD

Your optical drive can record your favorite music, programs, and files on CD-R and CD-RW
discs. Create your own music CDs and play them on any standard audio player. You can
also record computer files, such as applications, documents, or other digital files, on a
recordable CD.
With a CD-R (CD-Recordable) disc, you can record information on the disc once. Although
you can’t change the recorded information, you may be able to add more information until
the disc is full, depending on the application you use. See the documentation that came
with your application for specific information about recording on your CD-R disc. It is best
to use CD-R discs for recording audio CDs, because your audio CD player may not read
CD-RW discs.
With a CD-RW (CD-Rewritable) disc, you can save and change information on your CD
multiple times. However, some software for recording media files on CDs can record data on
the disc only once.
You can record music on CD-R discs right from your iTunes library.
1

Open iTunes, located in the Dock in Mac OS X.

Select the music you want to record.

Insert a blank CD-R disc.

Click Burn CD at the top of the iTunes window.
You can also record data on CD-R discs with Disc Burner.

Insert a blank CD-R disc in the optical drive.

In the dialog box that appears, enter a name for the disc and select the format you want to
create. An icon for the CD appears on the desktop.

Double-click the CD icon, then drag files and folders to it.

Choose Burn Disc from the File menu or select the disc and drag it to the Burn Disc icon in
the Dock in Mac OS X.
For information about how to use iTunes to record music files on a CD, see the online help
for iTunes in the Help Center.

Chapter 4

Recording Information on a DVD

If you have a SuperDrive, you can author your own digital movies on a blank DVD-R
(DVD-Recordable) disc. In Mac OS X, you can also record other kinds of digital data, such as
backing up files onto DVD-R discs. However, once you record information on a DVD-R disc, it
cannot be overwritten.
With applications like iDVD or DVD Studio Pro, you can create your own customized DVD,
burn it on a blank DVD-R disc, and play it on most standard DVD players.
When you are finished with an iDVD project, you can write it to a blank DVD-R disc.
1

Open iDVD and open your completed DVD project.

Click the Burn button.

Insert a new blank DVD-R disc into the drive when prompted.

Click the Burn button again.
You can also record data on DVD-R discs in Mac OS X with Disc Burner.

Insert a blank DVD-R disc in the drive.

In the dialog box that appears, enter a name for the disc and select the format you want to
create. An icon for the DVD appears on the desktop.

Double-click the DVD icon, then drag files and folders to it.

Choose Burn Disc from the File menu or select the disc and drag it to the Burn Disc icon in
the Dock in Mac OS X.
For more information about how to use iDVD, see the online help for iDVD in the Help Center.

Using Your Computer

Using Your Modem
Your Macintosh may come with an Apple 56K internal modem installed.
To connect the Apple 56K internal modem, plug one end of the modem cord or RJ-11 cable
into the modem port on the back of the computer and the other end into a standard RJ-11
telephone wall jack.
Modem port icon

Modem port

Important Make sure you connect the internal modem to an analog phone line—the kind
used typically in homes. The modem will not work with a digital phone line.

For information on how to establish an Internet connection, see “Connecting to the
Internet” on page 115. More information about the internal modem is also available in
Mac Help.
Warning Disconnect your modem from the phone jack during lightning or thunder
storms. This will prevent a voltage overload from damaging the modem.

Using an External USB Modem

To connect an external USB modem, use a USB cable to connect the modem to an available
USB port on the keyboard, computer, USB monitor, or USB hub.
Check the documentation that came with the modem to see if it needs to be plugged into a
power outlet. Also look for instructions about installing modem software and connecting the
modem to a telephone line.

Connecting to an Ethernet Network
Your computer comes with built-in 10/100/1000 megabit per second (Mbps) twisted-pair
Ethernet networking capability, which you can use to connect to a network or to a cable or
digital subscriber line (DSL) modem. Connecting to a network gives you access to other
computers. You may be able to store and retrieve information; use network printers,
modems, and electronic mail; or connect to the Internet. You can also use Ethernet to share
files between two computers or set up a small network.
If you’re connecting to an existing network, you may be able to get information about the
network and the network software you need from a network administrator who oversees its
operation. Identify your organization’s network administrator before you begin.

Chapter 4

Follow these guidelines when selecting a cable for your network:
Type of twisted-pair Ethernet

Use twisted-pair cable types

10 Mbps

Category 3, 5, or 6

100/1000 Mbps

Category 5 or 6

Connecting to a Twisted-Pair Ethernet Network

You can connect directly to a 10/100/1000 twisted-pair Ethernet network.
Note: You can also connect your computer to an Ethernet network that uses thin coaxial
cables. To do this, you need an RJ-45–to–Thin Coax adapter (available from other
manufacturers). See your Apple-authorized dealer for more information on Ethernet
media adapters.
To connect your Macintosh to a centralized 10/100/1000 twisted-pair Ethernet network,
follow these steps:
1

Plug one end of an RJ-45 twisted-pair cable into the Ethernet port on your Macintosh.

Plug the other end of the cord into an RJ-45 wall outlet or external hub that is connected to a
twisted-pair Ethernet network.
Ethernet port
(Twisted-pair
Ethernet)

RJ-45 wall plate

Ethernet hub
or switch

Twisted-pair Ethernet cable

After you start up the computer, you need to configure the software for your network
connection. Your network administrator can provide the necessary information. You can also
get help configuring your network software using Mac Help (in the Help menu).

Using Your Computer

To configure your network settings:
1

Choose System Preferences from the Apple (K) menu and click Network.

Choose Built-in Ethernet from the Show pop-up menu.

Click the TCP/IP tab and enter information about your network. The default setting is
Configure Using DHCP.

Click Apply Now.

Close System Preferences.
Maximizing Ethernet Performance

Your computer performs best when the Ethernet port to which it is connected is set to autonegotiate. Ask your network administrator to verify this setting.
If you experience connection problems on your network, make sure your
network switch is set to auto-negotiate, if possible. If a switch’s port is not auto-negotiating,
your computer detects the appropriate speed but defaults to half-duplex mode. If the
switch’s port at the other end of the link is configured for full-duplex, a large number of late
events can occur on the link. If it isn’t possible to set the switch to auto-negotiate, then set
the switch’s port to half-duplex. For more information, see the documentation that came
with the Ethernet switch.
Important

Note: If you connect your computer directly to a configurable Ethernet switch, have your
network administrator disable spanning tree on that port. Otherwise your computer may
duplicate the AppleTalk address of another computer on the same network and both
network connections may become unreliable.
For more information on networking your Power Mac G4, go to AppleCare Service and
Support at www.apple.com/support
For More Information on Using Ethernet

Additional information, including setting up an Ethernet network or transferring files using
Ethernet, is available in Mac Help. Choose Mac Help from the Help menu and search for
“Ethernet” or “network.”
For information on networking products you can use with your Power Mac G4, go to the
Macintosh Products Guide at www.apple.com/guide

Chapter 4

Using AirPort Wireless Networking
AirPort offers an easy and affordable way to provide wireless Internet access anywhere at
home, at work, or in the classroom. Instead of using traditional cables, AirPort uses wireless
local area network (LAN) technology to provide wireless communication between multiple
computers. Through a wireless network, you can set up access to the Internet, transfer files,
play multiplayer games, and more.
Your Power Mac G4 is AirPort-ready. The only thing you need to add is an AirPort Card. See
“Installing an AirPort Card” on page 91. You install the AirPort Card in a slot inside the
computer and connect it directly to the end of a built-in antenna cable. For instructions on
using your Airport Card, see the About Your Airport Card booklet that came with your card.
How AirPort Provides Wireless Internet Access

With AirPort, you set up a wireless connection to a device known as a base station, which has
a physical connection to the Internet. AirPort technology works like a cordless telephone.
The handset of the cordless phone makes a wireless connection to the base, which is
connected to the telephone line. Similarly, your computer makes a wireless connection to
the base station, which is connected to the telephone line or your Ethernet network.

Telephone or Ethernet connection

AirPort Base Station

Using Your Computer

Wireless Network Connections

If you install an AirPort Card, you can
m connect your computer to a computer network that has wireless access
m use your computer to provide network access for other computers using wireless cards
m establish a wireless connection and share information with another computer that has an
AirPort Card
Check with your network administrator for more information about reaching the network’s
wireless access point.
Several kinds of objects placed near the computer can cause interference. See
the instructions that come with an AirPort Card or AirPort Base Station to learn about
avoiding interference. For more information, go to AppleCare Service and Support at
www.apple.com/support
Warning

For More Information on AirPort

To purchase an AirPort Card or AirPort Base Station, visit an Apple retail store, contact your
Apple-authorized dealer, or go to the Apple Store at www.apple.com/store
Additional information on AirPort is available in the online help. Choose Help Center from
the Help menu and click AirPort Help. You can also find information on Apple’s AirPort
website at www.apple.com/airport

Putting the Computer to Sleep to Save Energy
Power Mac G4 computers are set to go to sleep after a period of inactivity. Sleep is a state in
which your computer uses very little power. You can also put the computer to sleep
whenever you want.
Note: Power Mac G4 computers are set to sleep automatically after 20 minutes of inactivity;
however, you can change the automatic sleep settings in System Preferences.
When the computer wakes from sleep, your programs, documents, and computer settings
are exactly as you left them. To save more energy, shut down the computer when it’s not
in use.
To put your computer to sleep, you can do any of the following:
m Press the power button on the front of the computer.
m Choose Sleep from the Apple (K) menu.
m Set a sleep timer in your computer’s sleep settings by choosing System Preferences from
the Apple (K) menu and clicking Energy Saver.

Chapter 4

When the computer is in sleep, the front panel power button light pulses.
To wake the computer, press the power button on the front panel of the computer, or press a
key on the keyboard. With some Apple monitors, you can also use the monitor’s power
button to put the computer to sleep and wake it.
Not all PCI cards or replacement AGP cards comply with the computer’s power management
standards. If you install a non-compliant card, the computer can still enter sleep mode, but it
will not achieve maximum energy saving. You can use the Apple System Profiler to find out
whether an installed card is compliant.
For more information about energy-saving options, see Mac Help.

Attaching SCSI Devices to Your Computer
Some Power Mac G4 computer configurations come with an Ultra160 Dual Channel SCSI
card installed in a PCI slot with one or more internal SCSI hard disks connected to it. You
can install additional internal SCSI hard disk drives, up to a maximum of four drives. It’s
recommended that you only connect SCSI Ultra160 LVD hard disk drives to the internal port
of the Dual Channel SCSI card. You can connect external SCSI devices, including older drives
with slower data transfer rates, to the external port of the Ultra160 Dual Channel SCSI card.
Because the card has two channels, one connected to the internal port and another
connected to the external port, connecting older devices to the external port doesn’t slow
down the transfer rate of the internal hard disk drives.
Apple recommends that you use only SCSI Ultra160 LVD devices as internal hard disk drives.
To connect older SCSI devices that use a 25-pin or a 50-pin connector—such as scanners, or
DAT drives—you need to purchase SCSI adapters, or purchase and install a “legacy” SCSI PCI
card (one that supports older devices).
For more information about using different types of SCSI devices with your computer, go to
AppleCare Service and Support at www.apple.com/support

Transferring Information Between Two Macintosh
Computers
If two Macintosh computers are not connected by a network, you can transfer information
between them by connecting them with a standard category 5, 4 wire-pair (8 wires) Ethernet
cable (in effect creating a small network of just two computers), which you can buy from an
Apple-authorized dealer. You connect the cable to each computer’s Ethernet port and then
turn on file sharing on both computers. You can also configure the Ethernet settings on two
computers to create a small network.

Using Your Computer

First, turn on file sharing on both computers:
1

Choose System Preferences from the Apple (K) menu.

Open the Sharing pane and click Start to turn File Sharing on.

Open the Network pane, select AppleTalk, then select “Make AppleTalk Active.”
Next, follow these steps on one computer:

Choose Connect to Server from the Go menu.

Click Local Network.

Select the computer you want to access.
For more information about configuring Ethernet connections, search for “Ethernet” in
Mac Help.
You can also connect two Macintosh computers using a FireWire cable. You can then use
FireWire target disk mode to transfer files from one computer to another. For more information
about using FireWire target disk mode, see “FireWire Target Disk Mode” on page 56.
If you have an Internet connection, you can also transfer files via the Internet to your iDisk
storage area on .Mac, where you or another .Mac user can download them. For more
information about .Mac, see “.Mac—Internet Services for Mac Users” on page 26.

Using the Computer as a Server Without a Monitor
You can set up your computer to run as a server without an attached monitor. Follow
these steps:
1

Follow all the steps described in Chapter 1 to set up your computer, including connecting a
monitor, mouse, and keyboard.

Configure your server software as follows:
m Configure network access.
m Configure the security application so that the server can be controlled remotely.
m Set passwords for access to the server.
m Set network services to start up when the system starts up.

Be sure network services are operating properly.

Disconnect the monitor.
If you’re using remote access software, follow the instructions that came with your software
for logging in to and controlling the server.
Important

Chapter 4

Remember to turn off your computer before you reconnect the monitor.

C H A P T E R

5
5

Working Inside Your Computer
This chapter provides information and instructions for working inside your computer.
Instructions are provided for the following procedures:
m “Opening the Computer” on page 68
m “Installing Memory” on page 71
m “Installing Internal Storage Devices” on page 73
m “Installing a PCI Expansion Card or Replacing the AGP Card” on page 87
m “Installing an AirPort Card” on page 91
m “Replacing the Battery” on page 92
Apple recommends that you have an Apple-certified technician install memory,
PCI expansion cards, and internal storage devices. Consult the service and support
information that came with your computer for instructions on how to contact an Appleauthorized service provider or Apple for service. If you install these items yourself, you
risk damaging your equipment, and such damage is not covered by the limited warranty
on your computer. See an Apple-authorized dealer or service provider for additional
information about this or any other warranty question.

Warning

Opening the Computer
1

Before you open your computer, shut it down:
m In Mac OS X, choose Shut Down from the Apple (K) menu.
m In Mac OS 9, choose Shut Down from the Special menu.
Warning Always shut down your Power Mac G4 before opening it to avoid damaging its
internal components or the components you want to install. Do not open the computer
or attempt to install items inside it while it is turned on.

Wait five to ten minutes to allow the computer’s internal components to cool.
After shutting down your computer, the internal components can be very hot.
Let the computer cool down before continuing.
Warning

Unplug all the cables from the computer except the power cord.

Touch the metal PCI access covers on the back of the computer to discharge any
static charge.

Touch the metal
portion of the PCI
port access covers.

Always do this before you touch any parts, or install any components, inside
the computer. To avoid generating static electricity, do not walk around the room until you
have finished installing the expansion card, memory, or internal storage device and closed
the computer.
Important

Chapter 5

Unplug the power cord.
The power supply in your computer is a high-voltage component and should
not be opened for any reason, even when the computer is off. If the power supply needs
service, contact your Apple-authorized dealer or service provider.
Warning

Lift the latch on the side of the computer.

Lift the latch to unlock
the side panel.

Note: If the latch won’t lift, check that the security lock port and lockable cover latch in the
back of the computer are not locked.

Working Inside Your Computer

Gently lower the side panel onto a clean, flat surface, preferably onto a soft, clean cloth.

Gently lower the side
panel until it lies flat.

Chapter 5

Installing Memory
Your computer uses Double-Data-Rate (DDR) Synchronous Dynamic Random-Access
Memory (SDRAM) in packages called Dual Inline Memory Modules (DIMM). You can install
additional DIMMs in the four DDR SDRAM slots on your computer’s main logic board, up to
a maximum of 2 gigabytes.
Depending on your computer’s bus speed, 133 MHz or 167 MHz, you have one of these
types of memory installed:
m 133 MHz systems use PC 2100 DIMMs.
m 167 MHz systems use PC 2700 DIMMs.
When you install additional memory, make sure you have the correct memory
speed for your computer’s bus speed. To find the bus speed of your computer, use Apple
System Profiler, which is in the Utilities folder in your computer’s Applications folder. Refer to
Hardware Overview section of the System Profile for your computer’s bus speed.
Important

DIMMs must fit these specifications:
m 2.5 volt ( V )
m 64-bit wide, 184-pin module
m Maximum number of memory devices on DDR SDRAM is 16.
m Non parity
m No error correcting codes (ECC)
m Unbuffered; do not use registered or buffered DDR SDRAM.
If you install 512 MB DDR SDRAM, it must have 256 megabit (Mbit) devices. You can also
install 256 MB DDR SDRAM that has 256 Mbit or 128 Mbit devices. You can install different
DDR SDRAM DIMMs in any order in any memory slot. To check the compatibility of your
DDR SDRAM DIMMs, see the Macintosh Products Guide on Apple’s website at
www.apple.com/guide
SDRAM from older Macintosh computers is not compatible with your Power
Mac G4. Do not use older SDRAM, even if it fits into the DDR SDRAM slots.
Important

Note: When purchasing DDR SDRAM for use in Macintosh computers, make sure that the
memory vendor conforms to the JEDEC specification. Check with your memory vendor to
ensure that the DDR SDRAM supports the correct timing modes and that the Serial Presence
Detect (SPD) feature has been programmed properly, as described in the JEDEC
specification. You can purchase Apple-branded memory online from the Apple Store at
store.apple.com

Working Inside Your Computer

Open the ejectors on the DDR SDRAM slots you want to use by pushing down on them.

Align the SDRAM in the slot and push both ends of the SDRAM down until the tabs are
vertical and the ejectors snap into place.
Important

Do not touch the SDRAM connectors. Handle the SDRAM only by the edges.

Close the computer.
SDRAM DIMM (Your DIMM’s shape and components may vary.)
The SDRAM DIMM is designed to fit into
Connectors
the slot only one way. Be sure to align the
notch in the DIMM with the small rib
inside the slot. With the ejectors in the
open position (as shown), push down
on the DIMM until it snaps into place.
The ejectors will automatically close.
Ejectors
(They should be pushed outward and down
to be in the open position, as shown.)

Chapter 5

Notch

SDRAM slot (1 of 4)

Rib (inside slot)

Installing Internal Storage Devices
Your Macintosh has six internal drive bays: Two optical drive bays and two hard drive bays in
the front, and two hard drive bays in the rear. In many configurations, a single hard disk drive
occupies the rear bay. One of the upper front bays contains an optical drive, and you can
purchase and install a second optical drive in the lower bay.
You can add SCSI or ATA disk drives to the empty front and rear drive bays.
The drives must meet these specifications:
m Width: 3.9 inches (102 mm)
m Depth: 5.7 inches (147 mm)
m Height: 1.0 inch
The computer provides support for the following types of internal storage devices:
m Ultra ATA/100 devices (in rear bay only)
m Ultra ATA/66 devices
m Ultra ATA devices
m ATA devices, including ATA, ATA-2, ATA-3, up to ATA-6 devices
m ATAPI drives, including SuperDrive (combination DVD-R and CD-RW drive), Combo drive
(combination DVD-ROM and CD-RW drive), CD-RW, DVD-ROM, and DVD-R drives
m Wide Ultra, Ultra2, and Ultra160 low-voltage differential (LVD) SCSI devices (these devices
require a SCSI PCI card)
Your Macintosh works with ATA and ATAPI internal storage devices that are set
for cable select mode. Because cable select mode forces the drive to set its ID based upon its
position on the cable, hard drives and optical drives are easily configured. Before you install
an additional ATA and ATAPI drive, check the documentation that came with your drive or
with the manufacturer to make sure it is set for cable select mode.
Important

Use the original Apple cables that came with your Macintosh when you install
additional drives. Some non-Apple cables may not correctly support cable select mode.
Important

For more information about requirements and devices supported, see your Apple-authorized
dealer and the support section of Apple’s website: www.apple.com/support

Working Inside Your Computer

Installing Ultra ATA Drives

Your Macintosh can accommodate two internal 1-inch-high ATA devices in each hard drive
carrier, for a total of four drives. If your computer has one Ultra ATA drive installed, it sits in
the rear drive carrier. You can install a second ATA drive in the rear carrier and two additional
ATA drives in the front carrier.

ATA/100 hard
disk drives

ATA/66 hard
disk drives

Note: Contact your drive manufacturer or consult the manufacturer’s website to determine
if your drive is set for cable select mode. Before installation, set the drive to cable select if the
manufacturer hasn’t already done so.

Chapter 5

To install an additional Ultra ATA drive in the rear carrier:
1

Pull the plastic tab on the drive carrier away from the computer’s chassis.

Lift the drive carrier up slightly to access the cables.
Pull this tab away from the
chassis wall to unlock the
drive carrier, and slide the
carrier up a short distance.
Gently pull the drive carrier
away from the chassis so
that you can access the
hard drive cables.
Release the ribbon cable
from the cable clamp.

Release the cable from the clamp.

Working Inside Your Computer

Pull the carrier free and continue to hold it while you remove the power and ribbon cables
from any installed drive.

While holding
the drive carrier
assembly, carefully
remove the ribbon
cable and power
cable from the
hard disk drive.

Chapter 5

Install the second ATA drive in the drive carrier and screw it into position.
There are four extra screws stored on the outside of the drive carrier.
You can use these screws if your second hard disk drive didn’t
come with any. If it did come with
screws, use those.
Attach an additional ATA drive (up to 1" high)
to the open portion of the drive carrier by
screwing it into position on its sides.

Position the hard disk drive on the drive
carrier so that the ribbon cable connector
and the power cord connector are accessible.

Working Inside Your Computer

Attach the power and ribbon cables to the drives.

While holding
the drive carrier
assembly, attach
the ribbon cable
and power cable
to both hard disk
drives.

Chapter 5

Replace the drive carrier on the chassis, pushing gently until it locks into position.
Secure the ribbon cable
with the cable clamp.

Secure the ribbon cable with the cable clamp.

Close the computer.

Reinstall the drive
carrier by aligning
the three pins on
the back of the carrier
with the guides inside the
chassis. Push down
on the carrier until
it locks into position.

Working Inside Your Computer

To install an additional Ultra ATA drive in the front carrier:
1

Release the ribbon cable from the cable clamp.

Remove the power and ribbon cables from any installed drive.

Slide the drive carrier away from the chassis.

Install the ATA drive in the drive carrier and screw it into position.

If necessary, remove
the ribbon and power
cables from any hard
disk drives already
installed in the carrier.
Then press down on the
tab located on the side
of the carrier, and slide
the drive carrier out.

Chapter 5

Replace the drive carrier by aligning the pins on the guide slots and gently pushing
the assembly.

Reinstall the drive carrier
assembly. Align these
pins with the three guide
slots in the chassis and
push the assembly in
until it clicks into place.

Working Inside Your Computer

Attach the ribbon and power cables.

Secure the ribbon cable with the cable clamp.

Close the computer.

Attach the ribbon and
power cord to the hard
disk drive(s).

Secure the ribbon cable
with the cable clamp.

Chapter 5

Installing Ultra160 LVD SCSI Drives

If your Macintosh has an internal Ultra160 LVD SCSI drive, you can connect up to three more
internal Ultra160 LVD SCSI drives to the PCI card and cable inside the computer—for a total
of four SCSI drives. This cable has the required connectors and a built-in terminator, so you
don’t need to add one.
Note: If your computer doesn’t have a SCSI hard disk drive, you need to install a SCSI PCI
card in your computer to connect SCSI hard disk drives. Replace the drive carrier on the
chassis and reinsert the screws.
Make sure all of the power
cord and ribbon cable
connectors are firmly attached
to all of the drives and to the
PCI SCSI card.

SCSI terminator

SCSI ribbon cable
PCI SCSI card
The ribbon cable may attach
to a different position on the PCI SCSI
card, depending on the card you have.

The procedures for disconnecting and connecting a SCSI hard disk drive and for removing
and inserting drive carriers are nearly identical to those presented in the ATA drive
installation instructions on page 74. Follow the ATA drive instructions when installing
a SCSI drive.

Working Inside Your Computer

However, before installing your SCSI drive, note the following difference:
When you configure your SCSI hard disk drive

Assign a unique SCSI ID number to each new device. A single factory-installed drive uses
SCSI ID 0; a second factory-installed drive uses SCSI ID 1; a third factory-installed drive
uses SCSI ID 2; and a fourth factory-installed drive uses SCSI ID 3. The SCSI PCI card has
been assigned ID 7. If you select one of these numbers for a new drive, the drive will not
work properly.
Installing Optical Drives

You can install a second optical drive in the lower optical drive bay.
1

Slide the metal shield away from the optical drive carrier.

Remove the power and ribbon cables.

Slide the metal shield
away from the optical
drive carrier.

Detach the power
cable and ribbon cable
from the optical drive.

Chapter 5

Unscrew the two attachment screws from the optical drive carrier.
Note: The drive carrier screws are located on the back side of the carrier.

Slide the carrier back and remove it from the computer.

Unscrew these two screws from
the optical drive carrier. Depending
on your computer model, the screws
may or may not come out completely,
and they may be either Phillips-head
screws or thumbscrews.

Slide the carrier back a
short distance until it
disengages from the
chassis, then remove
the carrier from the
computer.

Install the second optical drive in the drive carrier and screw it into position.
Slide the optical drive
into the drive carrier.

There are four extra screws stored on the outside of the drive
carrier. You can use these screws if your second optical drive
didn’t come with any. If it did come with screws, use those.

Screw the optical drive in place with four screws.

Working Inside Your Computer

Replace the drive carrier on the chassis and tighten the screws.

Reinstall the optical drive carrier in the computer. Make sure this guide
engages the slot in the chassis. Push the carrier forward until it is firmly
seated, and then tighten the two screws.

Attach the power and ribbon cables to the drives.

Reinstall the metal shield, taking care not to crimp the cables.

Attach the power cables and ribbon
cables to the optical drives. The end
connectors on the cables attach
to the top drive, and the middle
connectors attach to the bottom drive.

Reinstall the metal shield. Make sure it
engages these guides. Be careful not
to crimp or abrade any cables.

Chapter 5

Close the computer.

Installing a PCI Expansion Card or Replacing the AGP Card
You can expand the capabilities of your Power Mac G4 by installing cards in its expansion slots.
The server has five expansion card slots, four of which accommodate Peripheral Component
Interconnect (PCI) cards and one that accepts an advanced graphics port (AGP) card.
AGP cards and PCI cards have different connectors, so you cannot insert a PCI card into the
AGP slot.
About AGP Cards

Your AGP card, installed in slot 1, contains the graphics processor unit (GPU) and provides
the computer’s monitor ports. Slot 1 is designed specifically to accept AGP cards. This 66
megahertz (MHz) slot accommodates 1.5 volt ( V ) AGP cards (see the illustration on
page 89).
You can replace the card that came with the computer with an AGP 4X card. A replacement
AGP card must have a driver compatible with the Mac OS.
About PCI Expansion Cards

Your Macintosh has four expansion slots, labeled 2, 3, 4, and 5, which accept PCI cards up
to 12 inches long. Some models come with a SCSI PCI card installed in one of these slots.
Install only expansion cards that come with Macintosh driver software and that comply with
the PCI 2.1 standard.
The PCI slots can accommodate mixed voltage (5.0 V, 12 V, or 3.3 V ) cards with 32-bit or
64-bit data widths and a 33 MHz frequency. You can add a 66 MHz card to a PCI slot if the
card can operate at the lower 33 MHz rate.
Warning Do not use cards that function only at 66 MHz in the PCI slots. Damage to your
equipment could result. If you have a 66 MHz card, check the card’s manufacturer to see
if it also works at 33 MHz.

Maximum power consumption for all five expansion slots (the four PCI expansion cards and
the AGP card) should not exceed 90 watts ( W ).

Working Inside Your Computer

Installing Your Card

Install an AGP card in slot 1 only. Install PCI cards in the slots labeled PCI 2, 3, 4, and 5.
Cables with large connectors may interfere with the enclosure in the PCI slot
numbered 5, making it difficult to close the door and potentially causing damage to your
PCI card. If this is the case, rearrange the cards in the slots. You may also connect the
cable after the enclosure door is shut, but be sure to remove the cable before opening the
door again. If your PCI cards are connected to each other with cables or jumpers, take
care when closing the door.
Warning

Remove the screw that holds the port access cover in place, pull out the access cover, and set
it aside.
m To remove a card that’s installed in the computer, remove the screw that holds the card in
place and pull the card from the slot.

Remove the screw that
holds the port access
cover in place.
Port access cover

If you need to
remove the card in
the AGP slot, press
this tab to release the catch.

Chapter 5

Remove the card that you want to install from its static-proof bag and hold it by its corners,
taking care not to touch the gold connector or any of the components on the card.

Align the card’s connector with the expansion slot and press down until the connector is
inserted all the way into the slot.
If you’re installing a 12-inch card, make sure the card engages the appropriate guide at the
front of the computer.

Reinstall the screw
to secure the
card in place.

If the PCI card you
are installing is full-length
(12 inches), make sure it fits
in one of these four card guides.

Port access
opening
PCI slot

Working Inside Your Computer

Press the card gently but firmly until the connector is fully inserted.
m Don’t rock the card from side to side; instead, press the card straight into the slot.
m Don’t force the card. If you meet a lot of resistance, pull the card out. Check the
connector and the slot for damage or obstructions, then try inserting the card again.
m Pull the card gently to see if it is properly connected. If it resists and stays in place, and if
its gold connectors are barely visible, the card is connected.
4

Reinsert the port access cover screw and tighten it to hold the card in place.
If you removed a card from your computer and did not install a replacement,
be sure to place a port access cover over the empty slot. Do not leave an empty slot
without a cover. Covers keep foreign objects out of the enclosure. An uncovered slot can
affect the air flow that cools the computer’s internal components and cause damage.
Warning

Chapter 5

Close the computer.

Installing an AirPort Card
1

Position the AirPort Card with the AirPort ID numbers and bar code facing up and insert the
card into the AirPort Card connector.

AirPort Card connector

Plug the antenna wire
into the hole in the end
of the AirPort Card.
Insert the AirPort
Card—bar code side
up—until it is firmly
seated in the connector.

The antenna wire
is stowed here
when not in use.

Tuck the clear plastic tab on the AirPort Card up into the slot in the card guide.

Carefully attach the coaxial antenna wire to the port on the end of the AirPort Card.
Stow the antenna wire on the side of the PCI card guide, taking care not to bend or
crimp the wire tightly.

Close the computer.

Working Inside Your Computer

Replacing the Battery
Your computer has a 3.6 V lithium battery on the main logic board. If your computer has
intermittent problems starting up or random changes in its date and time settings, you may
need to replace the battery. Purchase a replacement battery from an Apple-authorized dealer.
1

Remove the battery from its holder, noting the orientation of the battery’s positive end.
(A plus sign is marked on and near the battery holder.)
Batteries contain chemicals, some of which may be harmful to the environment.
Please dispose of used batteries according to your local environmental laws and guidelines.
Important

Remove the battery by pulling it
up and out of its holder. You may
need to spread these two tabs
slightly apart to release the battery.
Spread the tabs gently so they
don’t break.

Chapter 5

If necessary, carefully spread the tabs holding the battery so you can remove it.
Installing the battery incorrectly may cause an explosion. Be sure the battery’s
positive and negative poles are correctly oriented in the holder. Use only the same type of
battery or an equivalent recommended by the manufacturer of the original.
Warning

Insert the new battery in the holder, making sure the battery’s positive symbol aligns with
the positive symbol on or near the holder.

Close the computer.

Working Inside Your Computer

C H A P T E R

6
6

Troubleshooting
If you have a problem while working with your computer, here are some things you can try
right away.
Note: If you have problems in the Classic environment, troubleshoot them as you would in
Mac OS 9, not Mac OS X.
If the computer won’t respond or the pointer won’t move:

First, make sure the mouse and keyboard are connected.
m Unplug and then plug in the connectors and make sure they are firmly seated.
Then try to cancel what the computer is doing.
m Press the Command (x) and Q keys at the same time to try to quit the current application.
m Press the Command (x) and period keys at the same time and, if a dialog box appears,
click Cancel.
m In Mac OS X, choose Force Quit from the Apple (K) menu and select the application you
would like to quit. Restart the computer by choosing Restart from the Apple (K) menu to
be sure the problem is entirely cleared up. You can also press the Esc, Option, and
Command (x) keys at the same time.
m In Mac OS 9, hold down the Esc, Option, and Command (x) keys to force the application
to quit. Restart the computer by choosing Restart from the Special menu to be sure the
problem is entirely cleared up.
m If that doesn’t work, hold down the power button on the front of the computer for
five seconds. After the computer turns off, press the button again to turn it on.
m If all else fails, unplug the power cord to turn the computer off, then replug the power
cord and use the front panel power button to restart the computer.
m If the problem occurs only when you use a particular program, check with the
program’s manufacturer to see if it is compatible with your computer.

m If the problem occurs frequently, choose Mac Help from the Help menu.
m In Mac OS X, search for “solve problems.”
m In Mac OS 9, look at the section on how to prevent and solve problems. You may also
need to check for extension conflicts or reinstall your computer’s system software.
If the computer freezes during startup or you see a continuous flashing
question mark for more than a minute:

If you are starting up in Mac OS 9, turn off your Mac OS 9 system extensions.
m Start up your computer while holding down the Shift key.
m If your computer is set to start up from another computer on your network, check that
your Ethernet cables are firmly connected, then restart your computer. Your computer
may be having trouble connecting to the network. Check that the startup computer or
server is not down.
m If you are in Mac OS 9, remove any items from the Servers folder in your System Folder.
Your computer may be having trouble connecting to a server over the Internet.
If that does not work, or if you are starting up in Mac OS X, turn off the computer by holding
down the power (®) button. Then start up using the Software Install CD.
m Insert your system software CD and start up while holding down the C key. (Make sure
the Caps Lock key is not engaged.)
m After the computer starts up, see the troubleshooting information in the onscreen help.
Choose Mac Help from the Help menu. Look at the section on how to prevent and solve
problems. You may need to check for extension conflicts or reinstall your computer’s
system software.
If the computer won’t turn on or start up:

First, make sure the power cord is connected to a working power source.
m The plug on the power cord must be completely inserted into the computer’s power
socket and firmly seated for your computer to operate correctly.
Reset the computer’s parameter random-access memory (PRAM).
m Start up the computer and immediately hold down the Command (x), Option, P, and R
keys until you hear the startup sound a second time. Then set your hard disk as the
computer’s startup disk.
m In Mac OS X, choose System Preferences from the Apple (K) menu and click Startup
Disk, then select your hard disk.
m In Mac OS 9, choose Control Panels from the Apple (K) menu, then choose Startup
Disk from the submenu, and select your hard disk.

Chapter 6

If you hear tones during startup:

m If you recently installed additional memory, a PCI expansion card, or another internal
component, make sure that it is correctly installed and that it is compatible with your
computer. See if removing it allows the computer to start up.
m Contact an Apple-authorized service provider.
If you are unable to eject a disc:

A file on the disc may be in use. Quit applications that are open, then try again.
If that doesn’t work:
m In Mac OS X, choose Restart from the Apple (K) menu and hold down either the mouse
button or the Media Eject (C) key on your Apple Pro Keyboard.
m In Mac OS 9, choose Restart from the Special menu and hold down either the mouse
button or the Media Eject (C) key on your Apple Pro Keyboard.
If that doesn’t work:
m Shut down the computer.
m Carefully press down the front panel covering the front of the drive tray and locate the
small hole below the drive tray.
m Carefully insert the end of a large straightened paper clip into the hole.
m Push firmly until the tray opens.
m Pull out the tray, remove the disc, and push the tray to close it.

Software Problems
If you have a problem with a software program:

m Use Software Update to ensure that you have the latest drivers, bug fixes, and other updates.
m For problems with software from a manufacturer other than Apple, contact the
manufacturer.
If you have a problem using your computer or working with the Mac OS:

m Look at the Help Center (in the Help menu) for instructions and troubleshooting
information.
m Go to the Apple Support website on the Internet for the latest troubleshooting
information and software updates: www.apple.com/support

Troubleshooting

If you have trouble using AirPort wireless communication:

m Make sure you have properly configured the software according to the instructions that
came with your AirPort Card or AirPort Base Station.
m Make sure the computer or network you are trying to connect to is running and has a
wireless access point.
m Make sure you are within antenna range of the other computer or the network’s access
point. Nearby electronic devices or metal structures can interfere with wireless
communication and reduce this range. Repositioning or rotating the computer may
improve reception.
m Check the AirPort signal level:
m In Mac OS X, up to four bars in the AirPort status icon in the menu bar.
m In Mac OS 9, up to five green dots in the AirPort portion of the Control Strip.
m See AirPort Help (in the Help Center) and the instructions that came with the wireless
device for more information.

Problems With Your Display
Warning If you have a problem with your Apple display and nothing presented in this
manual solves it, contact an Apple-authorized service provider or Apple for assistance.
If you attempt to repair the display yourself, any damage you may cause to the display
will not be covered by the limited warranty on your display. Contact an Apple-authorized
dealer or service provider for additional information about this or any other warranty
question.
No image appears on the screen.

m Make sure the display and computer are turned on.
m Make sure the cables are connected properly to your computer and the display.
m Make sure your computer is not in sleep. Press the power button or any key to see if the
computer wakes.
m Make sure the display brightness and contrast are set properly. Some monitors have
brightness and contrast controls on or under their front edge.
m Reset the PRAM by restarting the computer while holding down the Command (x),
Option, P, and R keys until you hear the startup sound a second time. Then start up using
the Software Install CD.
m If that doesn’t work but your display is functioning, then it is a software problem. Restart
your computer while pressing the Shift key to restart with your extensions off.

Chapter 6

The screen image appears dim or flickers.

m Adjust the display brightness and contrast settings. Some monitors have brightness and
contrast controls on or under their front edge. Depending on how dim your monitor
appears, you may be able to adjust brightness or contrast using the Displays pane of
System Preferences (in Mac OS X) or the Monitors control panel (in Mac OS 9).
m Calibrate the monitor.
m In Mac OS X, choose System Preferences from the Apple (K) menu, click Displays,
select Color, and click Calibrate.
m In Mac OS 9, choose Control Panels from the Apple (K) menu, then choose Monitors
from the submenu and click Calibrate. The Calibrate option is not available on some
displays.
m The flickering may be caused by interference from a nearby power line, a fluorescent
light, or an electrical device—for example, a radio, a microwave oven, or another
computer. Try relocating nearby electrical devices or moving your computer and display.
No colors appear on the screen or the colors don’t look right.

m Make sure the display is connected firmly to the computer.
m Calibrate your monitor, as described previously. For more information on color and your
display, see Mac Help.
m Use the Displays pane of System Preferences (in Mac OS X) or use the Monitors control
panel (in Mac OS 9) and make sure your monitor is set to display colors. For more
information on color and your display, see Mac Help.
After you change the screen resolution, desktop icons move.

m Changing the screen resolution affects the display of information on your screen.
The operating system may reposition icons after you change the screen resolution.
The screen freezes.

m Force the application that has frozen to quit.
m In Mac OS X, choose Force Quit from the Apple (K) menu and select the application.
m In Mac OS 9, hold down the Esc, Option, and Command (x) keys and click Force Quit
in the dialog box.
m If that doesn’t work, force the computer to restart by pressing the reset button (P) on
the front of your computer.
The light on the front of the monitor is flashing.

On some Apple flat-panel displays, the power light displays a series of short flashes when an
error has been detected.

Troubleshooting

m If you see a repeating sequence of three short flashes, the monitor is detecting input in
the wrong video format. Check that your monitor is compatible with your graphics card
and that you’ve installed the correct monitor software, if your monitor came with
installation software.
m If you see a sequence of two short flashes and a long flash, the monitor is detecting a
problem with a backlighting lamp. Contact an Apple-authorized dealer or service provider.

Restoring Your Computer’s Software
Software Restore restores your computer’s original contents, including the Mac OS 9 system
software, factory settings, and applications that came with your computer.
Software Restore does not restore Mac OS X, iPhoto, iMovie, or iTunes. If you need to
reinstall Mac OS X or these applications, use the Mac OS X installation discs that came with
your computer.
It is highly recommended that you back up the data on your hard disk before
restoring software. Apple is not responsible for any lost data.
Important

After reinstalling Mac OS X, should you need to restore the rest of your computer’s
applications and files, first install the Software Restore application, located on the first
Software Restore CD, and then follow the onscreen instructions.
To restore your computer’s original contents:

100

Chapter 6

Make sure you have all the Software Restore CDs that came with your computer.

Insert the first Apple Software Restore CD. Double-click the “SoftwareRestore.pkg” icon to
install the Software Restore application.

Follow the onscreen instructions.

A P P E N D I X

A
A

Specifications
Processor and Memory Specifications
Processor

m PowerPC™ G4 processor with 256 kilobytes (KB) on-chip cache
m Some configurations have an L3 backside cache per processor.
Random-access memory (RAM)

m Double-Data-Rate (DDR) Synchronous Dynamic Random-Access Memory (SDRAM) up to
a maximum of 2 GB.
m All DDR SDRAM is supplied in removable Dual Inline Memory Modules (DIMMs).
m Four slots are available for either PC 2100 or PC 2700 DDR SDRAM, depending on the
computer’s bus speed.
m For 133 MHz systems, use PC 2100 DIMMs.
m For 167 MHz systems, use PC 2700 DIMMs.
m 128, 256, or 512 MB DIMMs
256 MB DIMMs must have 128 or 256 megabit (Mbit) technology devices; 512 MB DIMMs
must have 256 Mbit technology devices.
m 2.5 volt ( V ) unbuffered, 64-bit wide, 184-pin
m Non error correcting (ECC)
m Non parity
Apple System Profiler, located in the Utilities folder of the computer’s Applications folder,
provides information about your computer, including the type and amount of memory.

101

Dimensions and Operating Environment
Dimensions

m Weight: 19.05 kg, 42 lbs.
Weight depends on configuration. Weight above includes basic configuration: an optical
and one hard disk drive. Weight may be greater if optional devices are installed.
m Height: 432 mm, 17.0 in.
m Width: 227 mm, 8.9 in.
m Depth: 468 mm, 18.4 in.
Operating environment

m
m
m
m

Operating temperature: 10° to 35° C (50° to 95° F)
Storage temperature: –40° to 47° C (–40° to 116.6° F)
Relative humidity: 5% to 95% (noncondensing)
Altitude: 0 to 3048 meters (0 to 10,000 feet)

CD-RW Drive Specifications

m Disc diameters supported: 12 cm (4.7 in.)
Data formats

m
m
m
m
m
m
m
m
m
m
m
m

102

Appendix A

CD-ROM
CD-Audio
CD-R
CD-RW
CDI
CD Bridge
CD Extended
CD Mixed Mode
Photo CD
Video CD
3-inch circular CD (8 cm)
non-circular CDs

Combo Drive (DVD-ROM/CD-RW) Specifications

m Disc diameters supported: 12 cm (4.7 in.)
Data formats

m
m
m
m
m
m
m
m
m
m
m
m
m

CD-ROM
CD-Audio
CD-R
CD-RW
CDI
CD Bridge
CD Extended
CD Mixed Mode
Photo CD
Video CD
DVD-Video
DVD-ROM
DVD-R (read only)

SuperDrive (DVD-R/CD-RW) Specifications

m Disc diameters supported: 12 cm (4.7 in.), 6.75 cm (3 in.)
Data formats

m
m
m
m
m
m
m
m
m
m
m
m
m
m

CD-ROM
CD-Audio
CD-R
CD-RW
CDI
CD Bridge
CD Extended
CD Mixed Mode
Photo CD
Video CD
non-circular CDs
DVD-Video
DVD-ROM
DVD-R

Specifications

103

USB Specifications

m Support for USB 1.1
m Four external Universal Serial Bus (USB) Type A ports, two on the rear panel and two on
the Apple Pro Keyboard.
m Each rear port is on a separate 12 megabit per second (Mbps) USB channel.
m 500 milliamperes (mA) at 5 V are available per port for a total of 1 ampere.
FireWire Specifications

m Data transfer speed: 100, 200, and 400 Mbps
Power

m Output voltage range: Approximately 13 to 30 V
m Output power range: Up to 15 W
Ethernet Specifications

m
m
m
m
m
m
m
m

IEEE 802.3 compliant
Maximum cable length: 100 meters (m)
Protocols: Open Transport, AppleShare, AppleTalk, NetWare for Macintosh, TCP/IP
Connector: RJ-45 for 10Base-T, 100Base-TX, and 1000Base-T
Media, 10Base-T: Category 3 or higher UTP on 2 pairs up to 100 m
Media, 100Base-TX: Category 5 UTP on 2 pairs up to 100 m
Media, 1000Base-T: Category 5 and 6 UTP on 4 pairs up to 100 m
Channel speeds: IEEE Auto Negotiation of 10Base-T, 100Base-TX, and 1000Base-T

Modem Specifications

m Data communications standard: K56Flex and V.90
m Speed: 53 kilobits per second (Kbps)
m Fax standard: ITU V.17

104

Appendix A

Specifications for the AirPort Card (Optional)

m
m
m
m

Wireless data rate: Up to 11 Mbps
Range: Up to 150 feet (data rates may vary depending on environmental conditions)
Frequency band: 2.4 gigahertz (GHz)
Radio output power: 15 dBm (nominal)

Compatibility

m 802.11 Direct Sequence Spread Spectrum (DSSS) 1 and 2 Mbps standard
m 802.11 HR DSSS 11 Mbps standard
Audio Output Specifications

m Data format 24-bit stereo, 44.1 kilohertz (kHz) audio sample rate
Sound out using the Apple speaker mini-jack

m
m
m
m
m

Power: 8 watts per channel
Frequency response: 20 hertz (Hz) to 20 kHz
Signal-to-noise ratio: Greater than 90 decibels (dB)
Total harmonic distortion: Less than 0.1 percent
Load: 8 ohm (Ω)

Sound out using the headphone jack

m
m
m
m

Power: 40 milliwatts (mW )
Frequency response: 40 Hz to 20 kHz
Signal-to-noise ratio: Greater than 96 dB
Load: 32 Ω

Sound output using line-out connector

m
m
m
m

Full-scale amplitude: 1.5 volts (root mean square) ( Vrms) for load greater than 1kOhms
Frequency response: 8 Hz to 20 kHz (load independent)
Signal-to-noise ratio: Greater than 100 decibels (dB)
Total harmonic distortion: Less than 0.004 percent

Audio Input Specifications

m Data format 24 bits stereo, 44.1 kHz audio sample rate
Line-in specification

m Maximum amplitude: 2 volts (root mean square) ( Vrms)

Specifications

105

m Frequency response: 5 Hz to 20 kHz
m Signal-to-noise ratio: Greater than 100 dB
m Total harmonic distortion: Less than 0.005 percent
Graphics Controller

AGP 4X card with an Apple Display Connector (ADC) and Digital Visual Interface (DVI)
connector.
Video Display Modes

For technical specifications for your display:
m Apple displays: Go to the Apple website and check the specifications for your product at
www.apple.com/displays
m Third-party displays: Go to www.apple.com/guide
Power Supply
AC line input

m Line voltage/current: 100–120 V alternating current (AC), 6.5 amperes (A) or 200–240 V
AC, 3.5 A, single phase, set automatically by power supply
m Frequency: 50–60 Hz
DC monitor output

m 4.0 A maximum at nominal 25 V DC from the Apple Display Connector
Power Requirements for Devices You Can Connect
Expansion cards

m Maximum power consumption by the AGP card is 30 W.
m Maximum power consumption by four PCI cards is 60 W.
USB devices

m Each of the computer’s built-in USB ports is allotted 500 mA.
FireWire devices

m The computer can provide up to 15 W total to the FireWire ports.
System Clock and Battery

m CMOS custom circuitry with long-life lithium battery. You can replace the computer’s
battery (see “Replacing the Battery” on page 92) with a new one purchased from an
Apple-authorized dealer.

106

Appendix A

A P P E N D I X

B
B

Safety, Maintenance, and Ergonomics
This appendix provides important information about safety procedures, routine
maintenance, and ergonomic considerations for using your computer and display.

Important Safety Information
The only way to disconnect power completely from your computer is to unplug the power
cord from the main power supply. To disconnect your display completely, you must also
unplug its power cable from the computer or power outlet. Make sure at least one end of the
device’s power cord is within easy reach so that you can unplug the computer or display
when necessary.
For your own safety and that of your equipment, always take the following precautions.
Disconnect the power plug (by pulling the plug, not the cord), from your computer or
display and disconnect the phone cord if any of the following conditions exists:
m The power cord or plug becomes frayed or otherwise damaged
m You spill something into the case
m Your computer or display is exposed to rain or any other excess moisture
m Your computer or display has been dropped or the case has been otherwise damaged
m You suspect that your computer or display needs service or repair
m You want to clean the computer or display case or screen

107

To prevent accidents and damage to your computer or display, be sure that you always follow
these instructions:
m Keep your computer and display away from sources of liquids and moisture.
m Don’t set anything on top of the computer or display.
m Keep the computer and display vents free from obstruction.
m Never remove the case from the monitor or open your computer when it’s running. You
could come in contact with hazardous voltage.
m During lightning storms, disconnect your modem from the phone jack to prevent a
destructive voltage overload from damaging the modem.
Your Macintosh is equipped with a three-wire grounding plug—a plug that has a third
grounding pin. This is a safety feature. Don’t modify the plug to fit into an ungrounded
outlet. Contact a licensed electrician to replace the outlet with a properly grounded
one. Do not defeat the purpose of the grounding plug!
Be careful when lifting or moving your computer or monitor. Be sure to use correct lifting
procedures, lifting with your legs. When carrying the monitor, make sure the monitor is
facing you. Don’t carry the monitor by its stand.
Electrical equipment may be hazardous if misused. Operation of this product
by children must always be supervised by an adult. Do not allow children access to the
interior of any electrical product and do not permit them to handle any cables.
Warning

Apple and the Environment

At Apple, we recognize our responsibility to minimize the environmental impacts of our
operations and products.
For More Information

Go to www.apple.com/about/environment

108

Appendix B

General Maintenance
If you need to clean the computer or display beyond wiping it down with a clean cloth,
follow these instructions:
1

Turn your computer and display off.

Disconnect the computer power cable from the electrical outlet or power strip. If your
display is connected to an outlet, disconnect it as well.

Disconnect the display’s cables from the computer.

Clean the display screen with soft, lint-free paper or cloth dampened with mild soap
and water.
Warning Do not spray liquid directly onto the display screen. Liquid could drip inside
the display and cause electrical shock.

Wipe the computer or display case surfaces lightly with a clean, soft cloth dampened
with water.
Don’t use alcohol, aerosol sprays, solvents, or abrasives that might damage the
finish on the case.

Important

Protecting Your Removable Media Drive

To keep your removable media drive working properly:
m Position your computer so that the drive tray doesn’t bump into anything when it opens.
m Close the drive when you’re not using it.
m Do not put anything on the drive tray when it is open.
m Do not touch the optical drive lens with your fingers. Do not wipe the lens with a paper
towel or other abrasive surface. If you need to clean the lens, see an Apple-authorized
service provider for a lens cleaner.
m Keep your computer away from any source of moisture.

Safety, Maintenance, and Ergonomics

109

Maintaining Your Display

To maintain your display and ensure its long life:
m Do not press on the surface of the display screen.
m Do not write on the screen or touch the screen with a sharp object.
m If you will not be using your display and computer for a day or more, turn off the
computer and display or use Energy Saver.
m Turn off your monitor, turn down the brightness, or use a screen saver program that dims
or varies the image on the screen when the computer is idle for a prolonged time.

Important Ergonomic and Health-Related Information
Here are some guidelines for adjusting the furniture in your office to reduce glare and to
accommodate your physical size and shape.
m An adjustable chair that provides firm, comfortable support is best. Adjust the height of
the chair so your thighs are tilted slightly and your feet are flat on the floor.
The back of the chair should support your lower back (lumbar region). Follow the
manufacturer’s instructions for adjusting the backrest to fit your body properly.
m When you use the computer keyboard, your shoulders should be relaxed. Your upper arm
and forearm should form an approximate right angle, with your wrist and hand in roughly
a straight line.
You may have to raise your chair so your forearms and hands are at the proper angle to
the keyboard. If this makes it impossible to rest your feet flat on the floor, you can use a
footrest with adjustable height and tilt to make up for any gap between the floor and your
feet. Or you can lower the desktop to eliminate the need for a footrest. Another option is
to use a desk with a keyboard tray that’s lower than the regular work surface.
m Position the mouse at the same height as your keyboard. Allow adequate space to use the
mouse comfortably.
m Arrange the monitor so the top of the screen is slightly below your eye level when you’re
sitting at the keyboard. The best distance from your eyes to the screen is up to you,
although most people seem to prefer 18 to 28 inches (45 to 70 cm).

110

Appendix B

m Position the monitor to minimize glare and reflections on the screen from overhead lights
and nearby windows. If possible, use a tiltable monitor stand. The stand lets you set the
monitor at the best angle for viewing, helping to reduce or eliminate glare from lighting
sources you can’t move.
45–70 cm (18–28 in.)

Shoulders relaxed

Forearms and hands
in a straight line

Top of the screen at or slightly
below eye level (You may need
to adjust the height of your
display by placing something
under it or by raising your
work surface.)

Forearms level
or tilted slightly
Screen positioned to avoid
reflected glare
Lower back supported
Clearance under work surface
Thighs tilted slightly
Feet flat on the floor

For more information about health, safety, and maintenance, go to Apple’s World Wide
website: www.apple.com/about/ergonomics

Safety, Maintenance, and Ergonomics

111

A P P E N D I X

C Connecting to the Internet
C

It’s best to configure your network and Internet connection using Setup Assistant when you
first set up Mac OS X. The assistant helps you enter your Internet configuration information,
set up your networking software, and sign up for an Internet service provider (ISP) if you
don’t already have one.
If you did not already use the Setup Assistant to configure your Internet connection, you may
be able to use it now. Open the Utilities folder and double-click the Setup Assistant icon. If
you don’t want to use the Setup Assistant or if there is no Setup Assistant icon in the Utilities
folder, you can use the information in this appendix to set up your connection.
Whether you connect through a dialup modem, cable modem, digital subscriber line (DSL),
or an Ethernet local area network (LAN), you need specific setup information from your ISP
or network administrator before you begin.
Note: For instructions on connecting to the Internet in Mac OS 9, open Mac Help, available
in the Help menu, and click “Internet and Networking.”
If you are connecting for the first time, changing your settings, or adding a new
configuration, follow the steps that correspond to your connection method:
m Dialup modem with Point-to-Point Protocol (PPP) connection
m Cable modem, DSL, or LAN connection using these configurations:
m Manual
m DHCP
m PPPoE
To set up your AirPort Base Station, use the AirPort Setup Assistant, located in
the Utilities folder in your Applications folder.
Important

113

Dialup (PPP) Connections
The most common way to connect to the Internet is through a dialup modem. Your modem
uses Point-to-Point Protocol (PPP) to connect you to an ISP. For instructions on connecting
your modem to a phone line, see “Using Your Modem” on page 60.
If you have an external modem, follow the setup instructions that came with your modem. If
you have an internal modem, gather the following information from your ISP and have it
available as you configure your network:
m Service provider name
m Telephone number
m Alternate number
m Account name
m Your password

114

Appendix C

To set up your network preferences for the Internal Modem port:
1

Choose System Preferences from the Apple menu.

Click the Network icon to open the Network pane.

Choose Network Port Configuration from the Show pop-up menu and click Internal Modem.

Drag Internal Modem to the top of the Port Configurations list to make it the preferred, or
primary, network interface.

Choose Internal Modem from the Show pop-up menu and click the PPP tab.

Connecting to the Internet

115

Enter the information from your ISP and click Apply Now.

To test your Internet configuration, dialup your ISP and establish a connection:
m Open the Internet Connect application in your Applications folder.
m Click Connect.
You can connect automatically when you start a TCP/IP application, such as a Web browser or
email, by setting your PPP Options as follows:
1

116

Appendix C

Click PPP Options in the PPP tab of Network preferences.

Click the “Connect automatically when needed” checkbox.

Click OK and Apply Now and close System Preferences.

DSL, Cable Modem, or LAN Internet Connections
If you connect to the Internet through a DSL, cable modem, or LAN, ask your ISP or network
administrator whether you should
m configure your connection manually. With a manual configuration, your ISP or network
administrator provides a static IP address and other information that you enter in the
Network pane.
m use the Dynamic Host Configuration Protocol (DHCP). With a DHCP configuration, the
DHCP server automatically enters the information for you.
m use Point-to-Point Protocol over Ethernet (PPPoE). If you use a DSL modem and need a
user name and password to connect to the Internet, you may need to configure your
network to use PPPoE.

Connecting to the Internet

117

Obtain the following information and have it available as you configure your network:
m Domain name server (DNS) addresses, if necessary
m DHCP or manual IP address configuration
m IP address
m Router address
m Subnet mask
Note: If your ISP or local network does not provide DNS addresses, they may have a
method of providing this information automatically.
First, set up your network preferences for the built-in Ethernet port:
1

Choose System Preferences from the Apple menu.

Click the Network icon to open the Network pane.

Choose Network Port Configurations from the Show pop-up menu.

Click Built-in Ethernet.

Drag Built-in Ethernet to the top of the Port Configurations list to make it the preferred, or
primary, network interface.
Next, follow the instructions to either configure your network manually, using DHCP, or
using PPPoE, as instructed by your ISP or network administrator.

118

Appendix C

Manual Configuration

For a manual configuration, have your static IP address, router address, and subnet mask
from your ISP ready:
1

Choose System Preferences from the Apple menu.

Click the Network icon to open the Network pane.

Choose Built-in Ethernet from the Show pop-up menu.

Click the TCP/IP tab, if necessary.

Choose Manually from the Configure pop-up menu.

Type the other information into the corresponding fields.

Click Apply Now and close System Preferences.
Once your configure your network, your connection is ready. Open your Web browser or
other TCP/IP application to test your Internet connection.
DHCP Configuration

After you set up a DHCP configuration, the DHCP server automatically provides your
network information:
1

Choose System Preferences from the Apple menu.

Click the Network icon to open the Network pane.

Connecting to the Internet

119

Choose Built-in Ethernet from the Show pop-up menu.

Click the TCP/IP tab, if necessary.

Choose Using DHCP from the Configure pop-up menu.

Click Apply Now and close System Preferences.
Open your Web browser or other TCP/IP application to test your Internet connection.
Note: Unless your ISP instructs you to do otherwise, ignore the DHCP Client ID field and
the Search Domains field.
PPPoE Configuration

Some DSL-based ISPs use Point-to-Point Protocol over Ethernet (PPPoE). Check with your ISP
to determine if you should connect using PPPoE. If you use a DSL modem and need a user
name and password to connect to the Internet, follow these instructions.

120

Appendix C

Gather this information from your ISP:
m User name and password
m Domain name server (DNS) address
Note: Your ISP may not require you to enter a DNS server address.

Choose System Preferences from the Apple menu.

Click the Network icon to open the Network pane.

Choose Built-in Ethernet from the Show pop-up menu.

Click the PPPoE tab and select Connect using PPPoE.

Type your user name in the Account Name field and your password in the Password
field. If you want all users of your computer to use the same connection method,
select “Save password.”
Note: To connect automatically when you start a TCP/IP application, such as a Web browser
or email, click PPPoE Options, then click “Connect automatically when needed.”

Click the TCP/IP tab and choose either PPP or Manually from the Configure pop-up menu, as
instructed by your Internet service provider. If you have a static IP address from your ISP,
choose Manually and type the address in the IP address field.

Connecting to the Internet

121

Type the Domain Name Server (DNS) addresses in the corresponding field.

Click Apply Now and close System Preferences.
Once you configure your network, your Internet connection is ready. You can open your Web
browser or other TCP/IP application to test your connection.
If you did not click the option to automatically connect, then you will need to
open the Internet Connect application, choose the correct configuration, and then click
Connect. See Internet Connect Help in the Help menu for more information.
Important

Troubleshooting Your Connection
Cable Modem, DSL, and LAN Internet Connections

If you are not able to connect to the Internet using your cable modem, DSL, or local area
network (LAN), follow these steps.
Instructions that refer to modems do not apply to LAN users. LAN users may
have hubs, switches, routers, or connection pods that cable and DSL modem users do not.
LAN users should contact their network administrator rather than an ISP.
Important

122

Appendix C

Check the cables and power supplies

Make sure all modem cables are firmly plugged in, including the modem power cord, the
cable from the modem to the computer, and the cable from the modem to the wall jack.
Check the cables and power supplies to Ethernet hubs and routers.
Cycle the power and reset the modem hardware

Cycle the power on your DSL or cable modem by turning it off for a few minutes then
turning it back on. Some ISPs recommend that you unplug the modem’s power cord. If your
modem has a reset button, you can press it either before or after cycling the power.
PPPoE Connections

If you are unable to connect to your Internet service provider using PPPoE, first check the
cables and power supplies, then cycle the power and reset the modem hardware.
Check System Preferences settings

Use System Preferences in the Apple menu to verify that you’ve selected PPPoE and to
verify your
m account information
m TCP/IP settings
m primary network interface is set to “Built-in Ethernet”
Next, follow these steps:
1

Choose System Preferences from the Apple menu.

Click the Network icon to open the Network pane.

Choose Network Port Configurations from the Show pop-up menu.

Select Built-in Ethernet and drag Built-in Ethernet to the top of the Port Configurations list.

Choose Built-in Ethernet from the Show pop-up menu.

Select the PPPoE tab.

Select Connect using PPPoE.

Check the Account Name field to be sure you have entered the correct information from
your ISP.

Retype your password if you chose to save your password, to be sure it is correct.

Select the TCP/IP tab. Follow your ISP’s instructions for setting up this pane.

Click Apply Now if you make any changes and then close System Preferences.

Connecting to the Internet

123

Network Connections

If you have two or more computers attempting to share an Internet connection, be sure that
your network is set up properly. You need to know if your ISP provides only one IP address
or if it provides multiple IP addresses. If only one IP address is used, then you must have a
router capable of sharing the connection, also known as network address translation (NAT)
or “IP masquerading.” Check the documentation provided with your router for setup
information. Check with the person who set up your network. The AirPort Base Station may
be used for this routing function. For information on using the AirPort Base Station, check
the online help. Choose Help Center from the Help menu and click AirPort Help. You can
also find information on Apple’s AirPort website at www.apple.com/airport
Contact your ISP

If you cannot resolve the issue using these steps, contact your ISP.

124

Appendix C

Communications Regulation Information
FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. See instructions if interference to radio or television reception
is suspected.
Radio and Television Interference

This computer equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and used
properly—that is, in strict accordance with Apple’s instructions—it may cause interference with radio and
television reception.
This equipment has been tested and found to comply with the limits for a Class B digital device in accordance
with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee that interference will not
occur in a particular installation.
You can determine whether your computer system is causing interference by turning it off. If the interference
stops, it was probably caused by the computer or one of the peripheral devices.
If your computer system does cause interference to radio or television reception, try to correct the interference
by using one or more of the following measures:
m Turn the television or radio antenna until the interference stops.
m Move the computer to one side or the other of the television or radio.
m Move the computer farther away from the television or radio.
m Plug the computer into an outlet that is on a different circuit from the television or radio. (That is,
make certain the computer and the television or radio are on circuits controlled by different circuit
breakers or fuses.)
If necessary, consult an Apple-authorized service provider or Apple. See the service and support information that
came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions.
Important Changes or modifications to this product not authorized by Apple Computer, Inc., could void the
EMC compliance and negate your authority to operate the product.
This product was tested for EMC compliance under conditions that included the use of Apple peripheral devices
and Apple shielded cables and connectors between system components. It is important that you use Apple
peripheral devices and shielded cables and connectors between system components to reduce the possibility of
causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral
devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple
peripheral devices, contact the manufacturer or dealer for assistance.
Responsible party (contact for FCC matters only): Apple Computer, Inc. Product Compliance, 1 Infinite Loop M/
S 26-A, Cupertino, CA 95014-2084, 408-974-2000.
Industry Canada Statement

Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
VCCI Class B Statement

Communications Regulation Information

125

European Community

Complies with European Directives 72/23/EEC and 89/336/EEC.
Laser Information

Making adjustments or performing procedures other than those specified in your equipment’s
manual may result in hazardous radiation exposure.
Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to
the eyes. The use of optical instruments, such as magnifying lenses, with this product increases the potential
hazard to your eyes. For your safety, have this equipment serviced only by an Apple-authorized service provider.
If you have an internal Apple CD-ROM, DVD-ROM, or DVD-RAM drive in your computer, your computer is a Class
1 laser product. The Class 1 label, located in a user-accessible area, indicates that the drive meets minimum safety
requirements. A service warning label is located in a service-accessible area. The labels on your product may differ
slightly from the ones shown here.

Warning

Class 1 label

Service warning label

Laser Specifications

Laser on pickup unit (when reading a CD):
m Type: Semiconductor GaAlAs laser
m Wavelength: 790 nm
m Power out of objective lens: 3.3 mW
m Beam divergence: horizontal 12º vertical 35º
Exposure to Radio Frequency Energy

The radiated output power of the optional AirPort Card is far below the FCC radio frequency exposure limits.
Nevertheless, it is advised to use the wireless equipment in such a manner that the potential for human contact
during normal operation is minimized.
Mouse and Keyboard Information

The Apple optical mouse is a Class 1 LED product. This product complies with the requirements of European
Directives 72/23/EEC and 89/336/EEC.
It also complies with the Canadian ICES-003 Class B Specification.
High-Risk Activities Warning

This computer system is not intended for use in the operation of nuclear facilities, aircraft navigation or
communications systems, or air traffic control machines, or for any other uses where the failure of the computer
system could lead to death, personal injury or severe environmental damage.
ENERGY STAR® Compliance

As an ENERGY STAR® partner, Apple has determined that standard configurations of this product using the Mac OS X
and Mac OS 9 operating systems meet the ENERGY STAR® guidelines for energy efficiency. The ENERGY STAR®
program is a partnership with office product equipment manufacturers to promote energy-efficiency. Reducing
energy consumption of office products saves money and reduces pollution by eliminating wasted energy.

126

Laser Information

Telephone and Apple 56K Modem Information
Notify Your Telephone Company

Some telephone companies require that you notify the local business office when you hook up a modem to their
lines.
Information You Need in the United States

The internal modem complies with Part 68 of the FCC rules. On the back of this equipment is a label that
contains, among other information, the FCC registration number and ringer equivalence number (REN). If
requested, provide this information to your telephone company.
m Ringer equivalence number (REN): 0.8 The REN is useful for determining the quantity of devices you may
connect to your telephone lines and still have all those devices ring when your telephone number is called. In
most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0).
To be certain of the number of devices you may connect to your line, as determined by the REN, you should
contact your local telephone company to determine the maximum REN for your calling area.
m Telephone jack type: USOC, RJ-11 An FCC-compliant telephone cord and modular plug are provided with this
equipment. This equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack that complies with Part 68 rules. See the installation instructions for details.
Telephone Line Problems

If your telephone doesn’t work, there may be a problem with your telephone line. Disconnect the modem to see
if the problem goes away. If it doesn’t, report the problem either to your local telephone company or to your
company’s telecommunications department.
If disconnecting the modem eliminates the problem, the modem itself may need service. See the service and
support information that came with your Apple product for instructions on how to contact Apple or an Appleauthorized service provider for assistance.
If you do not disconnect your modem when it is adversely affecting the telephone line, the telephone company
has the right to disconnect your service temporarily until you correct the problem. The telephone company will
notify you as soon as possible. Also, you will be informed of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of your equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modifications to maintain uninterrupted service.
The internal modem will not work with party lines, cannot be connected to a coin-operated telephone, and may
not work with a private branch exchange (PBX).
Telephone Consumer Protection Act

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device to send any message via a telephone fax machine unless such message clearly contains, in a
margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it
was sent and an identification of the business, other entity, or individual sending the message and the telephone
number of the sending machine of such business, entity, or individual.
Information You Need in Canada

The Industry Canada (IC) label identifies certified equipment. This certification means that the equipment meets
certain telecommunications network protective, operational, and safety requirements. The Department does not
guarantee the equipment will operate to a user’s satisfaction.
Before installing this equipment, make sure that you are permitted to connect to the facilities of the local
telecommunications company. Be sure you use an acceptable method of connection to install the equipment. In
some cases, you may extend the company’s internal wiring for single-line individual service by means of a certified
telephone extension cord. Be aware, however, that compliance with these conditions may not prevent
degradation of service in some situations.

Telephone and Apple 56K Modem Information

127

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the
supplier. Any equipment malfunctions or repairs or alterations that you make to this equipment may cause the
telecommunications company to request that you disconnect the equipment.
In Canada, contact Apple at: 7495 Birchmount Road, Markham, Ontario, L3R 5G2, 800-263-3394
Warning Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
Users should not attempt to make such connections themselves, but should contact the appropriate electric
inspection authority or electrician.
m Load number: 0.3 The load number (LN) assigned to each terminal device denotes the percentage of the total
load to be connected to the telephone loop that is used by the device, to prevent overloading. The termination
of a loop may consist of any combination of devices, subject only to the requirement that the sum of the load
numbers of all devices does not exceed 100.
m Telephone jack type: CA-11
Informations Destinées aux Utilisateurs Canadiens

L’étiquette d’Industrie Canada identifie un matériel homologué. Cette étiquette certifie que le matériel est
conforme à certaines normes de protection, d’exploitation et de sécurité des réseaux de télécommunications. Le
Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de la raccorder au réseau de l’enterprise
locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de
raccordement. Dans certains cas, le câblage appartenant à l’enterprise utilisé pour un service individuel à ligne
unique peut être prolongé au moyen d’un dispositif homologué de raccordement (cordon prolongateur
téléphonique).
L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empêche
pas la dégradation du service dans certaines situations. De fait, les enterprises de télécommunication ne
permettent pas que l’on raccorde un matériel aux prises d’abonnés, sauf dans les cas précis prévus par les terifs
particuliers de ces enterprises.
Les réparations de matériel homologué doivent être effectuées par un centre d’entretien canadien autorisé
désigné par la fournisseur. La compagnie de télécommunications peut demander à l’utilisateur de débrancher un
appareil suite à des réparations ou à des modifications effectuées par l’utilisateur ou en raison d’un mauvais
fonctionnement.
Veuillez contacter Apple pour des informations supplémentaires:
Apple Canada, Inc.
7495 Birchmount Road
Markham, Ontario
Canada L3R 5G2
Service à la clientèle d’Apple Canada : 800-263-3394
Pour sa propre protection, l’utilisateur doit s’assurer que tout les fils de mise à la terre du secteur, des lignes
téléphoniques et les canalisations d’eau métalliques, s’il y en a, soient raccordés ensemble. Cette précaution est
particulièrement importante dans les régions rurales.
Avertissement L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à une
service d’inspection des installations électriques ou à un électricien, selon le cas.
m Numéro de charge : 0.3 L’indice de charge (IC) assigné à chaque dispositif terminal indique, pour éviter toute
surcharge, le pourcentage de la charge totale qui sera raccordée à un circuit téléphonique bouclé utilisé par ce
dispositif. La terminaison du circuit bouclé peut être constituée de n’importe quelle combinaison de dispositifs
pourvu que la somme des indices de charge de l’ensemble des dispositifs ne dépasse pas 100.
m Type de prise téléphonique : CA-11

128

Telephone and Apple 56K Modem Information

Information You Need in the United Kingdom

This terminal equipment is intended for direct connection to the analogue Public Switched Telecommunications
Network and is approved for use within the United Kingdom with the following features:
m Modem facility
m Autocalling facility
m Autoanswer facility
m DTMF signaling
Operation in the absence of proceed indication or upon detection of proceed indication
This product is in conformity with relevant regulatory standards following the provisions of European Council
Directives 73/23/EEC (Low Voltage Directive) and 89/336/EEC amended by 92/31/EEC (EMC Directive).
Informationen fur Deutschland

Diese Modem-Karte ist als Endeinrichtung vorgesehen und muss an ein TAE mit F-Kodierung angeschlossen
werden. Diese Endeinrichtung ist in Konformität gemäss Niederspannungsrichtlinie 73 / 23 / EWG sowie EMCRichtlinien 89 / 336 / EWG und 92 / 31 / EWG.
Informations pour la France

Ce matériel est conforme aux normes applicables de sécurité éléctrique d’après la directive 73 / 23 / CEE et aux
normes applicables de comptabilité éléctromagnétique d’après la directive 89 / 336 / CEE, modifié par la directive
92 / 31 / CEE.
Information You Need in Australia

All telecommunications devices are required to be labelled as complying to the Australian telecommunications
standards, ensuring the health and safety of the operator and the integrity of the Australian telecommunications
network. To provide compliance with the Australian Communications Authority’s technical standards, please
ensure that the following AT commands are maintained:
m ATB0 (ITU/CCITT operation)
m AT&G0 (no guard tone)
m AT&P1 (33/66 pulse dial make/break ratio)
m ATS0 = 0 or ATS0 = 1 (no answer or answer greater than one ring)
m ATS6 = 95 (DTMF period between 70–255 ms)
m ATS11 = 95 (DTMF period between 70–255 ms)
For calls that are automatically generated, a total of three call attempts are allowed to a telephone number, with a
minimum period between calls of 2 seconds. If the call does not connect after three attempts, 30 minutes must
expire before automatic redialing may be initiated. Failure to set the modem (and any associated communications
software) to the above settings may result in the modem being non-compliant with Australian
telecommunications standards. Under these circumstances a user could be subject to significant penalties under
the Telecommunications Act 1997.
This modem must be properly secured in order for you to use it. Telecommunications network voltages exist
inside the computer and the telecommunications line connection must be removed before opening the
computer.
Information You Need in New Zealand

This modem is fully approved to operate on the New Zealand telecommunications network under Telepermit
number PTC 211/99/077. All telecommunications devices are required to hold a Telepermit and be labelled
accordingly with the approved Telepermit number to comply with the New Zealand telecommunications
standards, ensuring the health and safety of the operator and the integrity of the New Zealand
telecommunications network. To ensure compliance, all calls that are automatically generated should not make
more than 10 call attempts to the same number within any 30 minute period with a minimum period between
calls of 30 seconds. Failure to adhere to these standards may result in the modem being non-compliant with New
Zealand Telecom standards. Under these circumstances a user could be subject to significant penalties.

Telephone and Apple 56K Modem Information

129

The grant of a Telepermit for any item of terminal equipment indicates that only Telecom has
accepted that the item complies with minimum conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a
different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.

Important

130

Telephone and Apple 56K Modem Information

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2002:07:18 19:39:02
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : Instructional Products
Title                           : Setting Up Your Power Mac G4
Creator                         : FrameMaker 5.5.3
Modify Date                     : 2002:07:19 14:25:43-07:00
Subject                         : Includes setup and expansion information for Power Mac G4 computers
Keywords                        : 034-2215-A
Page Count                      : 132
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools

Apple Power Mac G4 (Mirrored Drive Doors) Setting Up Your User Manual G4Dual SU

Setting Up Your Power Mac G4 (Mirrored Drive Doors) Setting Up Your Power Mac G4 (Mirrored Drive Doors)

User manual PowerMacG4DualSU Apple Mac Server G4 1.0 DP MDD user guide User Manuals and Instruction Guides

Navigation menu

Versions of this User Manual:

Views

Navigation