Applied Wireless Identifications Group R32EA031 RFID Reader User Manual users manual
Applied Wireless Identifications Group Inc. RFID Reader users manual
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 691729 |
| Application ID | dtzJL47Plzi/lYIe3NTuHw== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 26.55kB (331883 bits) |
| Date Submitted | 2006-08-09 00:00:00 |
| Date Available | 2006-08-09 00:00:00 |
| Creation Date | 2006-07-28 19:26:01 |
| Producing Software | PDFXC Library (version 2.5). |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | users manual |
MPR-3014WF-xM -1- Doc# 041314 SENTINEL-SENSE MPR-3014 MPR-3014WF-xM Installation & Operation Manual AWID PROPRIETARY MPR-3014WF-xM -2- Doc# 041314 COPYRIGHT ACKNOWLEDGEMENTS The contents of this document are the property of Applied Wireless Identifications Group, Inc. (AWID) and are copyrighted. All rights reserved. Any reproduction, in whole or in part, is strictly prohibited. For additional copies of this document please contact: AWID 18300 Sutter Blvd Morgan Hill, CA 95037 http://www.AWID.com The information contained herein has been carefully checked and is believed to be accurate, no responsibility is assumed for inaccuracies. AWID reserves the right to make changes without prior notice. This document is not covered by any warranty either expressed or implied. Any comments, corrections or additions to the contents of this document should be directed to AWID at the above address. Copyright 2006 AWID, Printed in USA. All other trademarks are the property of their respective owners. FCC COMPLIANCE This equipment has been tested and found to be in compliance with the limits for FCC Part 15, Class A digital device. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The users are prohibited from making any change or modification to this product, any modification to this product shall void the user s authority to operate under FCC Part 15 Subpart A Section 15.21 regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and, (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. INDUSTRY C ANADA COMPLIANCE Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. AWID PROPRIETARY MPR-3014WF-xM -3- Doc# 041314 This device has been designed to operate with antennas described below, and having a maximum gain of 6 dBi. Antennas not as described or having a gain greater than 6 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. AWID, model ANT-915CPS-A; 5.7 dBi Circular polarized antenna (Patch). To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. C AUTION: Antenna should be positioned so that personnel in the area for prolonged periods may safely remain at least 23 cm (9 in) in an uncontrolled environment from the antenna s surface. Observe FCC OET Bulletin 56 Hazards of radio frequency and electromagnetic fields and Bulletin 65 Human exposure to radio frequency electromagnetic fields. AWID PROPRIETARY MPR-3014WF-xM -4- Doc# 041314 Table of Content 1. INTRODUCTION ............................................................................................................. 5 1.1. 1.2. 2. SPECIAL FEATURES ....................................................................................................... 5 MODEL NUMBER ASSIGNMENT ..................................................................................... 6 SPECIFICATIONS ........................................................................................................... 7 2.1. CHANNEL FREQUENCY TABLE ...................................................................................... 7 2.2. INPUT AND OUTPUT INTERFACES & CONNECTOR PIN ASSIGNMENT ................................ 7 2.2.1. General Purpose Input/Output ............................................................................. 8 2.2.2. RS-232 ................................................................................................................. 8 2.3. MEASURING READ DISTANCE ....................................................................................... 8 3. INSTALLATION PROCEDURE ..................................................................................... 8 3.1. PARTS LIST ................................................................................................................... 8 3.2. PREPARATION FOR INSTALLATION ................................................................................. 9 3.2.1. Bench Top Verification ........................................................................................ 9 3.2.2. Aiming of Antenna................................................................................................ 9 3.3. INSTALLATION STEPS .................................................................................................. 10 4. NOTES ON SOFTWARE PROGRAMMING AND SYSTEM OPERATION............. 11 4.1. SET UP AND SYSTEM OPERATION .............................................................................. 11 4.1.1. Setting Up MPR-3014WF-xM ............................................................................ 11 4.1.2. Running a Custom Software Application or the AWID Demo Program............... 11 4.1.3. Operating Modes ............................................................................................... 11 4.2. USERS NOTE ................................................................................................................ 11 FOR SYSTEM INTEGRATORS AND/OR SOFTWARE DEVELOPERS........................................... 11 FOR CUSTOM SYSTEM USERS......................................................................................... 11 FOR DEMO SOFTWARE USERS ........................................................................................ 12 5. APPENDIX ...................................................................................................................... 12 5.1. SAMPLE GPIO APPLICATION....................................................................................... 12 ................................................................................................................................................................................................................................ NOTE: READ AND USE THIS MANUAL. FAILURE TO FOLLOW THE INSTALLATION (SET UP) GUIDE MAY RESULT IN POOR PERFORMANCE OR EVEN CAUSE PERMANENT DAMAGE TO THE READER, THUS VOIDS THE PRODUCT WARRANTY. AWID PROPRIETARY MPR-3014WF-xM -5- Doc# 041314 1. INTRODUCTION AWID's Sentinel-Sense MPR-3014 WinCE mono-static reader family MPR-3014WF-xM consists of two versions of multi-antenna Radio Frequency IDentification (RFID) readers each with an on-board WinCE. Reader Versions MPR-3014WF-QM-NA (WinCE, Fixed, Quad-Ant, Mono-static & North America) MPR-3014WF-OM-NA (WinCE, Fixed, Octal-Ant, Mono-static & North America) I/O Interface One unique configuration for the MPR-3014WF-xM readers is the possibility of having RS-232 interface and Ethernet interface simultaneously present at the reader data input ports. To arbitrate possible data collision, the reader determines that local entry always dominates. Therefore, when both Ethernet commands and serial commands are present, serial command will dominate. This arbitration process is automatic and transparent to the user. MPR-3014WF-xM are long-range (12 to 25 feet, tag dependent) readers with general purpose digital I/O (GP I/O four (4) inputs four (4) outputs) that work with all leading passive UHF passive tags. Each of these readers comes with a unique combination of long read range, small size, and low power consumption. Its primary applications are asset management & tracking, and fleet management applications. The MPR-3014WF-QM-NA reader is delivered with the following components and accessories: MPR reader MPR-3014WF-QM-NA , firmware Ver. 5.XXN Antenna 4 EA ANT-915-CPS-A Cable 4 EA RTC08/16/24 (coax cable 8/16/24 feet, Reverse TNC) The MPR-3014WF-OM-NA reader is delivered with the following components and accessories: MPR reader MPR-3014WF-OM-NA, firmware Ver. 5.XXN Antenna 8 EA ANT-915-CPS-A Cable 8 EA RTC08/16/24 (coax cable 8/16/24 feet, Reverse TNC) In order to control the MPR-3014WF-xM readers you will need the following: · · · PC running Windows1 98 or higher, CD-ROM drive, Network connection Host software (AWID s demo software or your own custom software). RFID Tags (EPC C0, C1 Gen 1 & 2, ISO Type B, EPC V1.19 Rev.2) 1.1. SPECIAL FEATURES Though MPR-3014WF-xM can also be controlled from a non-Windows programming platform, AWID demo and FW upgrade programs are applications to run in Windows. AWID PROPRIETARY MPR-3014WF-xM · · · · · -6- Doc# 041314 Multi-Protocol: EPC C0, C1 Gen 1 & 2, ISO Type B, EPC V1.19 Rev.2 Thin passive tags with long-range performance High performance circular polarized antenna TCP/IP and four each optically isolated GP I/O Splash proof design for indoor or outdoor applications 1.2. MODEL NUMBER ASSIGNMENT Multi-Antenna Readers: MPR-3014WF-xM-YZ MPR Multiple-protocol RFID WF WinCE, Fixed-location x Number of antenna M Mono-static YZ Two letter web address for country/regional code EXAMPLES: MPR-3014WF-QM-TW for WinCE, fixed, 4-monostatic ant, Taiwan MPR-3014WF-OM-SG for WinCE, fixed, 8-monostatic ant, Singapore AWID PROPRIETARY MPR-3014WF-xM -7- Doc# 041314 2. SPECIFICATIONS Common RF Specifications (North America Versions only) Transmit frequency................................................. 902-928 MHz (ASK) Receiver frequency................................................. 902-928 MHz (ASK) Hopping channels................................................... 50 Channels Channel spacing..................................................... 500 kHz or 200kHz Hopping sequence.................................................. Pseudo random Protocol language EPC C0, C1 Gen 1 & 2, ISO Type B, EPC V1.19 Rev.2 Read range ............................................................ Depends on type & size of labels used Output power .......................................................... 1.0 Watt into 6 dBi antenna Antenna configuration ..1 to 8 antennas Stationary Reader (MPR-3014WF-xM-NA) Operating temperature range ................................. -20° C to +65° C (-4° F to 149° F) Color ....................................................................... Black Output data formats ................................................ TCP/IP or Serial GP I/O .................................................................... 4-input, 4-output Peripheral Interface ................................................ Ethernet, Serial, USB Dimension............................................................... 11 x 7.4 x 2.75 inches (28 x 19 x 7 cm) Weight .................................................................... 2,172 g (4.78 lb) Input voltage ........................................................... 12 VDC Input current ........................................................... 12VDC 3.3 amp 2.1. CHANNEL FREQUENCY TABLE Frequency range: 902 ~ 928 MHz Minimum number of frequency channels: 50 CH 902~928 902.75 903.25 903.75 904.25 904.75 905.25 905.75 906.25 906.75 907.25 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz CH 10 11 12 13 14 15 16 17 18 19 902~928 907.75 908.25 908.75 909.25 909.75 910.25 910.75 911.25 911.75 912.25 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz CH 20 21 22 23 24 25 26 27 28 29 902~928 912.75 913.25 913.75 914.25 914.75 915.25 915.75 916.25 916.75 917.25 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz CH 30 31 32 33 34 35 36 37 38 39 902~928 917.75 918.25 918.75 919.25 919.75 920.25 920.75 921.25 921.75 922.25 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz CH 40 41 42 43 44 45 46 47 48 49 902~928 922.75 923.25 923.75 924.25 924.75 925.25 925.75 926.25 926.75 927.25 2.2. INPUT AND OUTPUT INTERFACES & CONNECTOR PIN ASSIGNMENT AWID PROPRIETARY MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MPR-3014WF-xM -8- Doc# 041314 2.2.1. General Purpose Input/Output Terminal block MPR-3014WF-xM 4 inputs & 4 outputs (optically isolated) Pin # Function description Output 1 Output 2 Output 3 Output 4 Output Common Pin # 10 Function description Input Common Input 4 Input 3 Input 2 Input 1 The four general-purpose inputs that use photo diodes are used to accept TTL input commands. Each input requires 15 mA and 5V to activate. The four outputs are solid state relays, with 0.03 uA off-state leakage current and the ability to sink 120 mA at a breakdown voltage of 400V DC. All four outputs are protected with reverse clamping diodes, and ready to drive inductive loads. The floating arrangement eliminates any ground loop considerations. 2.2.2. RS-232 Pin# Function description DCD RXD TXD DTR Pin # Function description GND DSR RTS CTS 2.3. MEASURING READ DISTANCE Make sure you know the tag types. For instance, EPC tags must be pre-programmed to be read. In certain readers and tags, the user must also be mindful of the tag s orientation and the reader s antenna orientation, what mounting surface the tags are designed for and how the tags are supposed to be mounted. Any departure from its intended purpose will drastically affect the reader s ability to energize the tag and its read range. When measuring the reader s read range, make sure that the tag is properly oriented to the reader antenna, and for optimum performance, be sure the operator s finger is not within three (3) inches of the tag s antenna surface. 3. INSTALLATION PROCEDURE This section provides installation and operation information for MPR-3014WF-xM readers. 3.1. PARTS LIST AWID PROPRIETARY MPR-3014WF-xM -9- Doc# 041314 Verify that all items listed below are present before starting the installation. a. Sentinel-Sense MPR-3014WF-xM b. ANT-915-CPS-A c. RTC08/16/24 d. Documentation & Demo Program CD e. 827-06W Reader mounting bracket (Optional) f. 12 VDC wall plug power supply unit (AWID P/N PS12-3.3AR) Qty=1 Qty=1~4 or 8 Qty=1~4 or 8 Qty=1 Qty=1 3.2. PREPARATION FOR INSTALLATION 3.2.1. Bench Top Verification It is always a good idea to verify system operation before committing to a full-scale installation. The following are the necessary steps to test reader s operation in a static environment. · · · Connect reader to Network with a network cable at the TCP/IP port Connect the power jack from the wall plug power supply to reader Load the demo program CD onto (installation) PC and launch the demo program. Try Connect after filling in the IP address of reader and then some commands. 3.2.2. Aiming of Antenna Antenna Pattern for MPR-3014WF-xM MPR-3014WF-xM comes with a set of (up to 4 or 8) antennas each circular polarized to ensure reading tag with random orientation. Most circular polarized antenna has a horizontal to vertical differential of up to 3 dB, this will cause the antenna pattern to deviate from a true circle. AWID s antenna has a horizontal to vertical differential of typically less than 0.5 dB, making the antenna pattern as near to a circle as possible. Width ( W) W (0.72R) 0.15 0.25 0.5 Distance (R) 0.75 Figure 1 MPR-3014WF Antenna Pattern AWID PROPRIETARY MPR-3014WF-xM - 10 - Doc# 041314 · Antenna pattern measurements represent both horizontal and vertical polarized planes of the read area transmitted by the reader. · In the drawing above, R = approximately 12 feet to 15 feet for MPR-3014WF-xM antenna with Alien free space tags. · Antenna pattern can be affected by RFI and other environmental conditions. 3.3. INSTALLATION STEPS · · · Check to ensure that all connections are secure. Make sure all wires through the cable clamps are anchored properly; avoid dangling wires that may become safety hazard. Mount the Reader using the four threaded mounting holes to fasten the reader on the desired mounting surface. Connect antenna(s) to reader with antenna cable(s). Mount or place antenna(s) at desired location(s). In cases where antenna aiming is critical, please order antenna-mounting bracket (P/N 827-06W) from AWID. This mounting bracket provides pan/tilt adjustment for the reader. AWID PROPRIETARY MPR-3014WF-xM - 11 - Doc# 041314 4. Notes on Software Programming and System Operation 4.1. SET UP AND SYSTEM OPERATION 4.1.1. Setting Up MPR-3014WF-xM Power up with the 12-V power supply unit, connect to Network through the Ethernet port with an RJ-45 cable. 4.1.2. Running a Custom Software Application or the AWID Demo Program If AWID Demo Program is not used, it is expected user will launch a Custom Software Application developed using the MPR 3014 Protocol and/or RFID Anywhere API to send to reader the commands as specified. 4.1.3. Operating Modes Typical operating modes for MPR-3014WF-xM can be grouped into the following modes: Search Mode This mode is used when operator or user is not certain which family of tags is placed on the items to be tracked. Since most tags are deterministic in nature, the reader must cycle through each and every protocol, issue a protocol specific inquiry, to hail and to wait for a response from tags of that specific protocol. Therefore, if there are many different protocols, for an untrained observer, the reader response will become sluggish. Mixed Mode This mode assumes the user is aware of the types of protocol in use, and furthermore, the user made a determined effort to operate the reader in a mixed protocol mode. In this mode, the user can decide how many and which specific protocols to be selected. Once Mix Protocol Mode is selected, the reader will routinely cycle through each protocol, dwell long enough for the reader to wait for a response and then move onto the next protocol. It should be noted that in a mixed protocol mode, the tag must have sufficient time to respond to the reader, and therefore, it can only be used on a conveyor belt arrangement, with specific speed restrictions. Single Protocol Mode Single protocol is the normal mode of operation, where the protocol type is known and many tags are expected to pass through the readers. 4.2. USERS NOTE O FOR SYSTEM INTEGRATORS AND/OR SOFTWARE DEVELOPERS System Integrators and/or Software developers should get familiar with RFID Anywhere API and/or the MPR-3014 Protocol specifications for developing applications that control MPR-3014 readers. O FOR CUSTOM SYSTEM USERS For custom system user, please refer to your host software user guide for information regarding system and software operations AWID PROPRIETARY MPR-3014WF-xM - 12 - Doc# 041314 O FOR DEMO SOFTWARE USERS If you are using the AWID demonstration software application which is .NET based with easy-to-follow GUI operations, simply fill in the IP address of MPR-3014WF-xM installed then click Connect should get you started. 5. Appendix 5.1. SAMPLE GPIO APPLICATION Shown in diagram below is an example of applying such external devices as stack lights, photo eyes, etc. to GPIO ports. AWID PROPRIETARY
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Producer : PDFXC Library (version 2.5). OS Info : vis: 148; ver: 5.1; bn: 00000a28; platf: 2; CDS: Service Pack 2 Create Date : 2006:07:28 19:26:01-08:00 Page Count : 12EXIF Metadata provided by EXIF.tools