Apply Mobile IDT00201 Wireless security token User Manual iDENtear Token User Guide

Download:
Mirror Download [FCC.gov]
Document ID	3139914
Application ID	OsFyDJCjQGx9xTj4CeX0hQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.83kB (172882 bits)
Date Submitted	2016-09-20 00:00:00
Date Available	2016-09-20 00:00:00
Creation Date	2016-09-19 14:16:34
Producing Software	Microsoft® Word 2010
Document Lastmod	2016-09-19 14:16:34
Document Title	iDENtear Token User Guide
Document Creator	Microsoft® Word 2010
Document Author:	Henri Sundelin

iDENtear Token User Guide
The iDENtear token is a compact authentication device that is used to authenticate the token
owner. When the token is taken into use in a process called provisioning, its owner's
identification details are stored on a backend iDENtear provisioning server and can then be
verified later with the iDENtear token upon request.
In a typical authentication scenario, the iDENtear user needs to prove his identity to access a
service or authorize a payment. To do this, the token connects locally over Bluetooth to a client
application, which in turn creates an Ethernet connection to the provisioning server. The client
software only forms the connection, it has no access to the data sent between the token and the
server.
The token contains an internal cryptographic keystore that stores all certificates required for
identifying the token and communicating with the provisioning server.
The token can store Bluetooth pairing information from 4 separate external devices.
Operation
The iDENtear token is designed for simple and durable everyday use. It has a single button and 2
LEDs housed inside a dust- and waterproof (IP66) casing.
From a user's point view, the iDENtear token is only used as one end-point of a paired Bluetooth
connection. The other end-point of the connection is an external client application that relays all
communication from the token to the iDENtear provisioning server for identification and
authentication purposes, and vice versa.
The token is operated with the button. In its default state, the token is in sleep mode and does not
advertise its own Bluetooth presence or accept external connection requests.


To establish a Bluetooth connection, press the button.
o Button press switches Bluetooth Smart advertising on/off. If there is no suitable
Bluetooth device in range to form a connection with, nothing happens.
o Advertising turns off automatically after 20 seconds if no Bluetooth connection
has been established.
To terminate an established connection, press the button.
o Connection terminates automatically after 60 seconds if no data has been
transferred.
The current status of the token is indicated by the LEDs below the button.
Green LED
Off
Off
Blinking 1x /s
Blinking 2x /s
Blinking 3x /s
Blinking
rapidly
Off
Blinking
Off
Off
Off
Description
Token is in sleep more, and can be activated by pressing the
button
Token is advertising and ready to connect
Token is connected in normal mode
Token is connected in FIPS approved Crypto Officer mode
Off
Token is communicating
Blinking
Blinking
On
constantly
Internal error. Return token to helpdesk.
Battery low. Return token to helpdesk.
On constantly
Red LED
Battery empty. Return token to helpdesk.
Maintenance
Clearing Bluetooth Pairings
To clear all Bluetooth pairings from the device:



Make sure the token is in sleep mode (both LEDs off)
Push the button and keep it pressed
After a moment, the red LED starts to blink rapidly. Release the button.
After the operation, all Bluetooth pairings from the token have been cleared.
Hard Reset
A hard reset can be performed to restore the device to its factory default state. A hard reset
flushes the token's keystore, which means that you cannot use the token before re-provisioning it.
To do a hard reset:





Make sure the token is in sleep mode (both LEDs off)
Push the button once so that the green LED starts blinking
Push the button again and keep it pressed.
After a moment the red LED starts to blink rapidly. Keep button pressed
When the red LED stays on and stops blinking, release the button
After a hard reset, the token's keystore has been flushed, and the provisioning process has to be
started again.
Battery and Safety Information
General Precautions




Normal operating temperature of the device is 0 - 35 °C (32 - 95 °F)
Do not use or store the device in temperatures above 60 °C (140 °F), even temporarily
Do not heat the device or leave it under direct sunlight
Do not puncture, bend or twist the device
Disposal instructions

Device contains a lithium battery. Dispose of this product in accordance with local and
national disposal regulations.
Regulatory Information
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Apply Mobile Ltd of 3-4 Wharfside The Boatyard, Worsley, Manchester, England, M28
2WN, UNITED KINGDOM, declare under our sole responsibility that the product, iDENtear
CC1 to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area may cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
Modifications
The FCC requires the user to be notified that any changes or modifications to this device that are
not expressly approved by Apply Mobile may void the users authority to operate the equipment.
EUROPEAN UNION NOTICE
Radio products with the CE alert marking comply with the R&TTE Directive (1995/5/EC) issued
by the Commission of the European Community .
Compliance with this directive implies conformity to the following European Norms
(in brackets are the equivalent international standards).
• EN 60950 (IEC60950) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label on your Apply Mobile
product.
Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low
Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms (in
brackets are the equivalent international standards).
• EN 55022 (CISPR 22) – Electromagnetic Interference
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity
• EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics
• EN 61000-3-3 (IEC610000) – Power Line Flicker
• EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled with the CE alert marking and may also
carry the CE logo.
Warranty
Apply Mobile Limited One-Year Product Warranty
Apply Mobile warrants this product against defects in materials and workmanship for its
warranty period. If a defect is discovered, Apply Mobile will, at its option, repair or replace the
product at no charge provided it is returned during the warranty period, with transportation
charges prepaid, to the authorized Apply Mobile dealer from whom you purchased the product.
Proof of purchase may be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse, or
misapplication; if the product has been modified without the written permission of Apply
Mobile; or if any Apply Mobile serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF
ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. APPLY
MOBILE SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
No Apply Mobile dealer, agent, or employee is authorized to make any modification, extension,
or addition to this warranty.
APPLY MOBILE IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR
UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST
PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING OR
REPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, APPLY
MOBILE PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
exclusions of implied warranties, so the above limitations of exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from
state to state.
Copyright 2016 Apply Mobile Ltd. All rights reserved.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
Language                        : en-US
Tagged PDF                      : Yes
Title                           : iDENtear Token User Guide
Author                          : Henri Sundelin
Creator                         : Microsoft® Word 2010
Create Date                     : 2016:09:19 14:16:34-04:00
Modify Date                     : 2016:09:19 14:16:34-04:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools