Aputure Imaging 2N-BLK Aputure Pro Coworker Wireless Remote User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2065404
Application ID	OcmsbR06TrQMQL19qd5b6A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.98kB (212227 bits)
Date Submitted	2013-09-08 00:00:00
Date Available	2013-09-08 00:00:00
Creation Date	2013-08-30 16:52:28
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2013-08-30 16:52:28
Document Title	Microsoft Word - User manual FCC ID 2AABZ2N-BLK V1.0.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Information for your safety
Do not disassemble or modify failure to observe this precaution could result in electric
shock or product malfunction. should the product break open as the result of a fall or other
accident, remove the batteries
Keep dry do not handle with wet hands or immerse in or expose to water or rain. Failure to
observe this precaution could result in fire or electric shock
Do not use in the presence of flammable gas failure to observe this precaution could result in
explosion or fire
keep out of reach of children this device contains small parts which may pose a choking
hazard. consult a physician immediately if a child swallows any part of this device
Do not expose to high temperatures Do not leave the device in a closed vehicle under the
sun or in other areas subject to extremely high temperatures. Failure to observe this precaution
could result in fire or in damage to the casing or internal parts.
Observe precaution when handling batteries Batteries may leak or explode if improperly
handled. Observe the following precautions when handling batteries for use in this device:
● Read and follow all warnings and instructions provided by the manufacturer.
● Do not mix old and new batteries or batteries of different types.
● Do not short or disassemble.
● Do not expose to flame or excessive heat.
● Do not attempt to insert batteries upside down or backwards.
● Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure
to remove the batteries when leaving the product unattended for prolonged periods or when no
charge remains.
● Should liquid from the batteries come into contact with skin or clothing, rinse immediately
with fresh water.
Introduction
Thank you for your purchase of Aputure Pro Coworker remote shutter, the product suits a wide
variety of tasks. It offers complete control of camera shutter without cumbersome cable
connection between the hand control units and the camera. see page 8 for a list of compatible
cameras.
Main features as follows
The world first cable exchangeable wireless remote release
Effective remote distance at open area: 10m
wired and wireless two operation methods free to choose.
Full function camera shutter control fits various tasks
16-unquie-channel supports multiple user environment
Ultra low-power consumption benefits a longer period of use
Power exhausting prompt design
Inserting Batteries
Transmitter:
Slide the battery-chamber cover from the back
of the transmitter and insert one 12V/23A
battery
(enclosed in package).
Receiver:
Slide the battery-chamber cover
from the back of the receiver and
insert two AAA 1.5v alkaline
batteries
(enclosed in package).
Replacing Batteries
When replacing batteries on transmitter or receiver:
1. Check the receiver is on the (off ) position
2. Turn the camera off and disconnect the receiver
3. Remove the batteries.
The Low Battery Indicator:
LED indicator on receiver blinking fast when the batteries are low, ready change batteries.
Operation
1、Turn off the camera and set the switch(5) of the receiver to ｀off＇.
2、Insert the cable end camera plugin (13) into camera remote socket, cable end receiver plugin
(12) into receiver plugin socket (3).
3、Adjust radio channel (2) on receiver and transmitter to the same position, e.g. the channel on the
receiver set to ｀1234 ＇and the transmitter must use the same channel.
4、Set the receiver switch (5) to ｀on＇, and turn on the camera.
5、Extend the transmitter antenna (11) fully.
Wireless modes:
A. Single shutter (camera in single shoot)
Half press the release button on transmitter for activating camera’s auto focus and light metering
system. Full press release button for picture shooting. LED indicator turns from green to red.
B. Continuous shutter (camera in continuous shoot) Same step as single, but keep the release
button for taking picture continually.
C. Bulb shutter (camera in bulb)
same step as single shutter while hold release button over 3 seconds, free to loose release button
after see the red light on transmitter off and red light on receiver constant on ,re-press the release
button to remove long exposure.
D. Delay /self
Switch the transmitter mode to clock (
), full press release button, camera automatic focus
and shutter after 5 seconds, LED indicator in receiver will start blinking from slow to fast.
Cable mode
Press release button on the receiver side, user can focus and release camera shutter without use
transmitter, even without battery.
Specification
Compatible Sheet:
Precautions for Use:
1. Use only the prescribed battery.
2. Check the camera battery level and number of exposures remaining before using the Wireless
remoteshutter. (See the camera manual ford etails).
3. Some cameras have an AF activation option that determines whether the camera will focus
when the release button is pressed halfway (see the camera manual for details)
4. Please do not connect or disassemble the receiver under the state of camera power-on.
5. Please do make the connector connected firmly to avoid problems in Operation.
Company: Aputure Imaging Industries Co., Ltd
Name: Aputure Pro Coworker Wireless Remote
Model Number: 2N-blk
FCC ID: 2AABZ2N-BLK
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment。

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:08:30 16:52:28+08:00
Create Date                     : 2013:08:30 16:52:28+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User manual FCC ID 2AABZ2N-BLK V1.0.doc
Creator                         : Administrator
Document ID                     : uuid:c4e34fea-374d-4c29-8e91-747cf57ac5d0
Instance ID                     : uuid:a6d7c95a-fa69-4018-89ed-b4dcce987848
Page Count                      : 4
Author                          : Administrator

EXIF Metadata provided by EXIF.tools