Arcade Whack N Win 11Ft Manual User
2015-03-30
User Manual: Arcade Whack N Win 11Ft Manual
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Whack N Win Service Manual Innovative Concepts in Entertainment, INC 10123 Main Street Clarence, NY 14031 WWW.ICEGAME.COM (716) 759-0360 I.C.E. Tech Support 1 Table of Contents Safety and Warnings 3 Game Assembly 4-8 Programming 9 Tower Score Charts 10 Sensitivity Calibration 11 Service Upper Marquee Access 12 Changing Tower Score Values 13 Power Supply 14 Piezo Assembly replacement Tower Lighting 15 Spare Parts List 16 Warranty 17 Revision G 8/19/2014 2 SAFETY AND WARNINGS BEFORE YOU BEGIN WARNING: WHEN INSTALLING THIS GAME, A GROUNDED A.C. RECEPTACLE MUST BE USED. FAILURE TO DO SO COULD RESULT IN INJURY TO YOURSELF OR OTHERS. FAILURE TO USE A GROUNDED RECEPTACLE COULD ALSO CAUSE IMPROPER GAME OPERATION, OR DAMAGE TO THE ELECTRONICS. NOTE: THIS GAME IS INTENDED FOR INDOOR USE ONLY. DO NOT DEFEAT OR REMOVE THE GROUNDING PRONG ON THE POWER CORD FOR THE SAME REASON AS GIVEN ABOVE. USING AN IMPROPERLY GROUNDED GAME COULD VOID YOUR WARRANTY. HAVE A QUALIFIED ELECTRICIAN CHECK YOUR A.C. RECEPTACLE TO BE SURE THE GROUND IS FUNCTIONING PROPERLY. THIS GAME IS DESIGNED TO DISSIPATE STATIC ELECTRICITY THROUGH THE GROUNDING PLANE OF THE GAME. IF THE A.C. GROUND DOES NOT WORK, THE GAME COULD DISCHARGE STATIC ELECTRICITY THROUGH THE GAME CIRCUITRY, WHICH COULD CAUSE DAMAGE. THE POWER SUPPLY IS NOT VOLTAGE ADJUSTABLE. TO OPERATE THE GAME AT VOLTAGES OTHER THAN THOSE IT WAS DESIGNED FOR. PLEASE CONTACT OUR SERVICE DEPARTMENT FOR VOLTAGE CONVERSION INFORMATION. WARNING DO NOT remove any of the components on the main board (e.g. compact flash and EPROMS) while the game is powered on. This may cause permanent damage to the parts and the main board. Removing any main board component part while powered on will void the warranty. ALWAYS REMOVE POWER TO THE GAME, BEFORE ATTEMPTING ANY SERVICE, UNLESS NEEDED FOR SPECIFIC TESTING. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN SERIOUS INJURY TO YOURSELF OR OTHERS. THIS GAME IS NOT SUITABLE FOR INSTALLATION IN AN AREA WHERE A WATER JET COULD BE USED. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. The game’s foot print is 42.5” w x 48” d x 136” h AC Power Information The games main fuse is accessed through the back of the game at the power mod. Above the power cord is a small panel that contains the main fuse. The value of the fuse for 120 volt users is 3 AMPS at 250Volt type slow blow. The value of the fuse for 230 users is 1.5 AMPS at 250Volt type slow blow. 3 Step 1: Open bottom access panel to expose main board. Remove lower light housing panel to access wiring. Remove the upper light housing panel. ICE part 6004 QTY 5 8-32 x 1/2 PPHMS (Black) Step 2: Install 2 1/4—20 x 1 1/4 bolts half way in the light housing’s guide tabs as shown with short arrows. Slide the light housing onto the base and stop and rest the tower on the 1/4-20 bolts. This will allow a space for you to work in running the wiring through to the cabinet base. Don’t worry about the wiring at this time, just be careful not to pinch the harness. 4 Step 3: Cut the wire tie shown and all the other below. This will allow you to take one connector harness at a time and insert it through to the bottom where the main board is located. Be careful not to snag and disconnect any other of the other wire harnesses while doing so. Step 4: Connect the five harnesses shown below that connects the middle section to the base section. They are color coded. 5 Step 5: While holding the upper light housing remove the two 1/4-20 x 1-1/4 screws using a # 3 Phillips screw driver on each side and slide the light housing down being careful not to pinch any of the wire harnesses. Attach the light housing using four flat screws on each side (only one side is shown in the diagram). Step 6: Before lifting the bonus marquee up to the top, open the access door using a 45 key. Put the door aside. Slide the marquee assembly onto the top of the light housing and connect the harness shown below. 6 Step 7: Step 8: Attach the Bonus Marquee using four Allen bolts. Replace the access panel door. From the back of the game, attach the right side balloons using three Allen bolts and washers. 6211 1/4-20 x 1 1/4(3) black bolts 6212 1/4 x 3/4 flat washer black 6799 1/4 x 7/8 (4) black bolts 6212 1/4 x 3/4 flat washer black Step 9: From the back of the game install the right side balloon. Before lifting onto the cabinet, remove the bottom wire channel to access the harness. Attach with three Allen bolts and washers. Connect the wire harness from the balloon to the base. 7 Step 10: Connect the light housing harnesses to J23, J24, and J25. The harnesses are labeled. J25 J24 J23 Final: Align the Playfield score graphic and Clear protective shield together and attach using 18 Phillip screws. You will need to remove the protective film from the plastic before you install. Start at the top and continue down in pairs. Do not tighten any screws until all of the screws have been installed. 6663 6/32 x 5/8 (18) Silver Phillips 8 Now that your game is assembled it is time to set the game options. The game’s scoring is shown on the Tower Score Chart and it is based on price per play. See the next page for available Tower Score Charts which can be replaced by calling service. You cannot change the values used in the Tower Score Charts. You can change the bonus amount and how much to charge per play. To determine which Tower Score Chart the game is using, when the power is applied to the game, the balloon to the right will display which Tower Score Chart being used. The display at the top shows the software version. If you want to change the cost of the game, then contact ICE Service Department to order a new Score Chart Tower. Open the cabinet’s lower drawer and at the back you will find the user control panel. Pressing the “PROG” button will enter the programming mode. The lower right balloon shows which option you are adjusting while the upper display shows the value for that option. Pressing the “SELECT” button will advance to the next option. The “UP” and “DOWN” buttons will change the option’s value. Programming Options for Whack N Win Revision 1.06 Option 0 Game Volume Min Max Inc 0 7 1 This option adjusts the general sounds and voices in the game. 1 Music Volume 0 7 1 0 10 1 This option adjusts the music only. 2 Coin 1 line How many “coin clicks” or pulses from coin 1 coin line to start a game. This line would be the switch with the white/brown wire attached to it. 3 Coin Multiplier 0 10 1 How many pulses each coin is worth on coin line 2. This line would be the switch with the white/red wire attached to it. This option should be set to 1 unless you are using different coins that have different values. For example if the coin you are using in coin 1 is a quarter and coin line 2 is accepting $1.00 coins, then this would be set to 4, not 1. If coin line 2 is accepting the same coin as coin line 1, then this would be set to 1. 4 DBV line 0 10 1 How many pulses is each coin worth on coin line 2. This line would be the switch with the white/orange wire attached to it (or DBV). This option depends on how you have configured your DBV for what currency your wish to accept. For example, if your coin 1 line accepts quarters and you have configured your DBV to pulse 4 times per dollar, then you would set this to 1. If your DBV pulses only once per dollar, then you would set this to 4. 5 Discount 0 10 1 This option allows you to give additional games, based on the amount of money inserted for credits purchased. So if you wanted to give 3 games per $1.00 and each game cost was .50¢, then this would be set to 2. You would also have to set option 6 to 1. Now when two games are purchased in a row without hitting the “Hit Pad” then the player will receive three games instead of two. 6 Games Discounted 0 20 1 This option works when a value is set in option 5 other than 0. This option determines how many games to give when using the discount option. See option 5 for further explanation. 7 Attract Time 0 90 1 Attract time This option sets the time between attract cycles. 9 Option 8 Sensitivity Min Max Inc 1 15 1 Do not alter this option unless you review the section titled “How to Calibrate the Hit Pad sensitivity”. Decreasing this value increases the sensitivity of the hit pad. Increasing this value will decrease the sensitivity of the hit pad. PAYOUT OPTIONS: 9 Bonus Window 1 6 1 Picture a garage door open and how easy it would be to throw a ball into the garage. As you decrease this value the garage door begins to close making it harder to throw a ball into the garage. The lower the value, the more closed the door. 10 Bonus Tickets 25 5000 25 This value tells the game how many tickets to pay when a bonus is achieved. 11 Scoring Table 1 9 1 Tells the game which tower score chart to use. See “WN Score Chart “ for options. Your game has the Score Tower Chart that is based on your cost of play. 12 Ticket Divider 0 2 1 This option allow s you to disable tickets or use two cent tickets. A setting of 0 disables tickets. A setting of 1 pays out all ticket owed. A setting of 2 pays out half the tickets owed. Any odd value of tickets owed will be truncated. So if 33 tickets are won and you have a setting of 2 only 16 tickets would be paid (it would subtract 1 ticket from 33 to 32 then it would divided by ½ giving you 16 tickets). PROGRESSIVE OPTIONS: 13 Games lost to Increment 0 10 1 This option tells the game when to increment the bonus when no bonus is won at the end of the game. So if you wanted to increase the bonus every other game, setting this to 2 would increase the bonus every two games lost. The next option sets how much to increase the bonus by. Setting of 0 turns off this feature. 14 Increment bonus amount 0 100 1 When 13 is on, adds these many tickets to the bonus. This option tells the game how much to add in tickets to the bonus when using option 13. 15 Bonus Cap 0 2500 25 This option limits the bonus from exceeding this value. 16 Factory Reset 0 1 1 Factory Reset ** Note for Option 11 ** Refer to the next page for option number. This must match your score table! ** Note for Option 13 ** When the bonus has been won, the bonus will reset back to the value stored in option 10. NOTE: If a marquee is attached then the stand alone progressive is disabled and the MQ will take its place. If the game becomes disconnected after that point a reboot will be required to re-implement the stand alone progressive. The next page shows the Tower Score Charts and shows both their coin values and recommended bonus values. 10 11 How to Check if your game is in Calibration. Step 1: Coin up the game. Step 2: Using the Mallet to strike the “Hit Pad” as hard as you can! (See Illustration). Marquee Display (Change Value) Increasing Value = Less Rebound Decreasing Value = More Rebound Step 3: If the lights travel to the top of the tower, rebound back down and land in the “Sensitivity Target Zone” then your game is Calibrated. (see Illustration) NOT CALIBRATED Step 4 : If the lights do not land in the “Sensitivity Target Zone” then you will need to adjust OPTION 8 in programming. See A-E below: A) Open the cabinets front drawer and inside you will find the User Control Panel. B) Press the “PROG” button once and the “Right Balloon” will Display the option you are adjusting. IF you accidentally hit a wrong button and the game is not responding normally… then turn off/on the game. (cycle power and start over) Increase the Value of Option 8 if the lights rebound off of the top of the tower and travel past the “Sensitivity Target Zone” (Increase Marquee Value Display by pressing “UP” button) E) Once you have Increased or Decreased the Marquee value in option 8 you must press the “PROG” ** Note ** The “Sensitivity Target Zone” button to exit. is between the two highest numbers on F) Repeat Steps 1—4 until your game is Calibrated. the Tower’s Score Chart. Your Tower’s Score Chart might differ from the picture shown. STEP 2: Whack the “Hit Pad” as hard as you can with the Mallet! (Do this after you “coin up” the game.) IMPORTANT: RECORD ALL SETTINGS ON THE CERTIFICATE LOCATED ON THE SIDE OF THE FRONT DRAWER - OR— USE THE REVERSE SIDE OF THIS PAPER IF IT CONTAINS A CALIBRATION CERTIFICATE. 12 NOT CALIBRATED Decrease the Value of Option 8 if the lights do not rebound off of the top of the tower. (Degrease Marquee Value Display by pressing “Down” button) “Sensitivity D) Press the “UP” or “Down” button to change the “SENSITIVITY VALUE” ( The Marquee BONUS DISPLAY on top of the tower will indicate the new “SENSITIVITY VALUE”. The “Balloon Display” should remain at 08) Target Zone” C) Press the “SELECT” button until the “Balloon Display” reads 08. (You will need to press “SELECT” 8 times) Balloon Display Option 08 Sensitivity Setting Accessing Upper LED light strips and Display Board To gain access to the electronics found inside the upper marquee, you will need to remove the upper marquee. Remove the four 1/4-20 x 7/8 bolts and washers holding the marquee in place (1). Open the back access door and unplug the harness (2 + 3). Lift the marquee up and place the marquee face down onto a table (4). Remove the Square bit screws around the outside of the marquee (5). Using a wrench on the inside, remove the two lower 1/4-20 Allen bolts (6). Now separate the back assembly from the front (7). 1 2 4 7 3 5 6 13 Changing the Tower Score Card’s Values 2 To change the Tower Score Card, remove the plastic shield and old Tower Score Card. Starting from the top, reinstall the silver Phillips screws. Power the game on and press the program button. Cycle through the options until option 11 is displayed. Enter the value for your tower score card. Refer to page 11 for score table value which is shown between () for option 11 of the game. 1 14 GAME POWER SUPPLIES There are two power supplies located at the back of the game. The IA2010 power supply provides the +12 DC volts to the game board, lights, and outer Fun lights. The WN2010 power supply provides the +5 DC voltage for the game logic and center LEDs. IA2010 WN201 WN1052X Piezo Sensor Assembly Replacement Open the bottom drawer and from underneath the barrel’s top remove the three bolts labeled as A,B, and C (1). Unplug the harness and lift the assembly out. When replacing, use the upper hole to feed the wire harness through. 3 A B C 2 1 15 E00869WNX +5 volt LED Lights are mounted with the red w/brown wire loop at the top, over the mounting screw. HAND TIGHT PLASTIC NUTS! DO NOT USE POWER TOOLS TO INSTALL!! E00843 +12 volt LED Fun Lights. To access the bulb, unscrew the plastic cover. 16 Spare Parts List Harnesses: Electronics: WN2051HX HARNESS (MAIN) E00418WNAX ASY (WHITE 27 LED TAPE STRIP) WN2052HX HARNESS (COIN DOOR) E00724WNAX ASY (RGB 81 LED TAPE STRIP) WN2060LX HARNESS (DC POWER) E00724WNBX ASY (RGB 54 LED TAPE STRIP) WN2063LX HARNESS (5V DC POWER) E00724WNX ASY (RGB 27 LED TAPE STRIP) WN2064LX HARNESS (POWER SUPPLY AC) E00788WNBX ASY (WHITE LRG 60 LED STRIP) WN2080LX HARNESS (RGB EXTENSION 1-5) E00843 "LED, E10, CLUSTER OF 12 (MEDIUM)" WN2081LX HARNESS (RGB EXTENSION 6-15) E00869WNX "ASY (5V RGB LED, PCB CONN)" WN2082HX HARNESS (RGB EXTENSION CABLES) E2034XX PCBA (BRAIN BOARD W/ 8716 FLAS WN2085HX HARNESS (FUN LIGHTS EXTENSION A) IA2010 POWER SUPPLY +12VDC 10A (ROHS) WN2086MX HARNESS (FUN LIGHTS EXTENSION B) IA4004 ROPE 6mm Blue WN2087HX HARNESS (FUN LIGHTS) PW2007PG GREEN NEON MINI FUNLIGHT BULB WN2097ELX HARNESS (MARQUEE EXTENSION) TA2032X PCBA (DISPLAY) WN2097ILX HARNESS (MARQUEE INTERFACE) TX2007X ASY (POWER MODULE 5 AMP) WN2098LX HARNESS (BALLOON LEDS/BONUS DISP WN2010 "POWER SUPPLY (5VDC, 40A)" VW2053HX HARNESS (TICKET DRAWER) WN2034X PCBA (I/O) WN2035X PCBA (RESISTOR) Decals: WN7000 DECAL (FRONT DOOR) COUPONS WN3002 CONTROL LED PANEL WN7002 DECAL (SIDE LEFT) WN7028X ASY MARQUEE WN7003 DECAL (SIDE RIGHT) MISC: WN7005 DECAL (REAR CABINET SIDE) WN4010 MALLET WN7007 CONTROL PANEL (MAT/PRINT) MA3006 T MOLDING (25/32 YELLOW) 105-2 WN7008 DECAL (REAR CABINET TOP LEFT) PE1350 DRAWER SLIDE 18 WN7009 DECAL (REAR CABINET TOP RIGHT) WN7010 DECAL (CARNIE BACKGROUND LEFT) WN7011 DECAL (CARNIE BACKGROUND RIGHT) WN7029 BALLOON GREEN (MAT/PRINT) WN7013 SPEAKER COVER (MAT/PRINT) WN7014 PLAYFIELD (MAT/PRINT) $.50 WN7025 BALLOON RED (MAT/PRINT) WN7026 BALLOON BLUE (MAT/PRINT) WN7027 BALLOON PURPLE TICKET (MAT/PRINT 17 WARRANTY POLICY I.C.E. Inc warrants all components in new machines to be free of defects in materials and workmanship for the period listed below: ■ 180 days on Main PCB’s, Computers & Motors ■ 1 year on all LCD monitor panels ■ 90 days on all other electronic and mechanical components ■ 30 days on all I.C.E. repairs and parts purchases I.C.E. Inc shall not be obligated to furnish a warranty request under the following conditions: ■ Equipment or parts have failed through normal wear and tear ■ Equipment has been subjected to unwarranted stress, abuse or neglect ■ Equipment has been damaged as a result of arbitrary repair/modification Products will only be covered under warranty by obtaining an I.C.E. authorized RMA #. To obtain an RMA # please provide I.C.E. tech support with the game serial # or original I.C.E. invoice # and a detailed description of the failure or fault symptoms. I.C.E. Inc will assume no liability whatsoever for costs associated with labor or travel time to replace defective parts. All defective warranty covered components will be replaced with new or factory refurbished components equal to OEM specifications. I.C.E. Inc will cover domestic UPS ground, or comparable shipping costs during the warranty period. International or expedited shipments are available for an additional charge. To obtain credit defective parts must be returned to I.C.E. Inc, at the customer’s expense, within 30 days. After 30 days a 15% re-stocking fee will apply to all returns. ICE distributors are independent, privately owned and operated. In their judgment, they may sell parts and/or accessories other than those manufactured by I.C.E. Inc. We cannot be responsible for the quality, suitability or safety of any non-I.C.E. part or modification (including labor) that is performed by such a distributor. Innovative Concepts in Entertainment 10123 Main St. Clarence, NY 14031 Phone #: (716) - 759 – 0360 Fax #: (716) – 759 – 0884 www.icegame.com 18 4 3 2 WN orange/black brown/red STA R LED orange black 1 2 LS 1 2 1 2 1 2 + + + + + + - - - - - - red x 2 black x 2 1 #E00788WNA X DUAL WHI TE LE D TAPE S TRI P + + + + + + - - - - - - orange/black x 2 blue/whi te orange/whi te green/whi te RS 1 2 STA R LED 1 2 orange black #E00418WNX WHI TE LE D TAPE ST RI P #E00418WNX WHI TE LE D TAPE ST RI P red black 1 2 R1 1 orange/whi te x 2 2 red red black 1 2 R2 1 orange/whi te x 2 2 red/black red black 1 2 R3 1 orange/whi te x 2 2 red/whi te orange black 1 2 #E00439WNX RED LED TA PE STRIP #E00439WNX RED LED TA PE STRIP #E00439WNX RED LED TA PE STRIP D + + + + + + - - - - - - B 1 2 D orange/whi te x 2 brown/green #E00788WNCX WHITE LED TA PE STRIP WN2097HX 1 2 orange x 2 black/red BONUS DISPLAY “BONUS” A RROW J1 1 2 3 4 5 6 BA - #E00788WNCX WHITE LED TA PE STRIP WHI TE BLACK orange x 2 whi te/red J6 1 2 3 4 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 red/black red green light blue J10 1 2 3 4 45 J1 1 2 3 4 orange red green blue J2 1 2 3 4 orange/black red/black green/black blue/black J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te J4 1 2 3 4 orange/red black/red whi te/red blue/red J5 1 2 3 4 black red/green whi te whi te/black 1 2 3 4 WHI TE/ORANGE* 42 WHI TE/RED* 41 WHI TE/BROWN* WN2035X – RESISTOR PCB C red/black red green light blue J6 1 2 3 4 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 red/black red green light blue J10 1 2 3 4 40 orange red green blue J2 1 2 3 4 orange/black red/black green/black blue/black 39 J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te 38 J4 1 2 3 4 orange/red black/red whi te/red blue/red 37 J5 1 2 3 4 black red/green whi te whi te/black WN2087HX WN2035X – RESISTOR PCB red/black red green light blue J6 1 2 3 4 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 red/black red green light blue J10 1 2 3 4 35 J1 1 2 3 4 orange red green blue J2 1 2 3 4 orange/black red/black green/black blue/black J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te J4 1 2 3 4 orange/red black/red whi te/red blue/red J5 1 2 3 4 black red/green whi te whi te/black WHI TE/BLUE WN2087HX 36 WN2082HX WHI TE/VI OLE T WHI TE/BLUE WHI TE/GREEN WHI TE/GREEN 34 WHI TE/YE LLOW WHI TE/YE LLOW 33 WHI TE/ORANGE WHI TE/ORANGE 32 WHI TE/RED WHI TE/BROWN* WHI TE/RED* WHI TE/ORANGE* WHI TE/YE LLOW* WHI TE/GREEN* 1 2 3 4 5 black/tan x 2 black/red x 2 black/orange x 2 black/yell ow x 2 black/green x 2 WN2035X – RESISTOR PCB red/black red green light blue J6 1 2 3 4 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 red/black red green light blue J10 1 2 3 4 30 WHI TE/BROWN BLACK J1 1 2 3 4 orange red green blue J2 1 2 3 4 orange/black red/black green/black blue/black J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te J4 1 2 3 4 orange/red black/red whi te/red blue/red J5 1 2 3 4 black red/green whi te whi te/black WHI TE/GREEN* 29 1 2 3 4 5 6 7 8 9 10 11 12 WHI TE/GREEN* 1 2 3 4 5 BLACK WHI TE/BROWN WHI TE/RED WHI TE/ORANGE WHI TE/YE LLOW WHI TE/GREEN WHI TE/BLUE WHI TE/VI OLE T WHI TE/GRAY WHI TE WHI TE/BLACK 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 orange viol et/brown x 2 viol et/red x 2 viol et/orange x 2 viol et/yell ow x 2 viol et/green x 2 viol et/blue x 2 viol et x 2 viol et/gray x 2 viol et/whi te x 2 viol et/black x 2 VENDOR 31 WHI TE/YE LLOW* WHI TE/YE LLOW* 28 WHI TE/ORANGE* WHI TE/ORANGE* 27 WHI TE/RED* 1 OF 2 WHI TE/RED* 26 WN2035X – RESISTOR PCB PAGE WHI TE/BROWN* red/black red green light blue J6 1 2 3 4 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 red/black red green light blue J10 1 2 3 4 25 WHI TE/BROWN* J1 1 2 3 4 orange red green blue J2 1 2 3 4 orange/black red/black green/black blue/black J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te 5/21/14 WHI TE/BLACK WHI TE/BLACK 24 REVISED WHI TE WHI TE 23 A WHI TE/GRAY WHI TE/GRAY 22 J4 1 2 3 4 orange/red black/red whi te/red blue/red J5 1 2 3 4 black red/green whi te whi te/black WHI TE/VI OLE T 21 WHI TE/BLUE WN2082HX WN2035X – RESISTOR PCB WN2087HX WN2086MX WHI TE/BLUE 3 WN2097ILX 3/31/14 WHI TE/VI OLE T DATE NICHOLAS BRANCATO DRAWN BY MANAGER ENGINEER DESCRIPTION SYSTEM SCHEMATIC WN1000X SCHEMATIC.VSDX FILENAME REQUIRED SIGNATURES B WHI TE/RED WHI TE/BROWN BLACK WHACK N WIN - WHI TE/GRAY WHI TE/VI OLE T TITLE - WHI TE WHI TE/GRAY WN1000X (1 OF 2) - WHI TE/BLACK WHI TE PART NO. + - C J1 1 2 3 4 WHI TE/BLACK 4 + - WHI TE/RED* WHI TE/BROWN* A + - WHI TE/ORANGE* E00869WNX – AS Y RGB LE D B + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 WHI TE/YE LLOW* 43 + orange/red red red/black red/whi te red/green green/black green/whi te orange/black blue/black blue/whi te blue/red whi te/black whi te/red WHI TE/YE LLOW* E00843 – LED BULB PW2007BP G – FUN LI GHT MINI BAS E NEON GREEN PW2007CPG – FUN LI GHT MINI CA P NEON GREEN PW2007S – FUN LI GHT MINI SOCKET PW2006W – FUN LI GHT WI RE CAP red/black red green light blue WHI TE/GREEN* 44 + WHI TE BLACK WHI TE/GREEN* TOWER LIGHT PART NUMBERS 1 orange 2 black #E00788WNCX WHITE LED TA PE STRIP black SG2032X DISPLAY red/black red green light blue BA 1 2 WHI TE/BROWN* WHI TE/RED* WHI TE/ORANGE* WHI TE/YE LLOW* WHI TE/GREEN* - “BONUS” A RROW orange whi te green light blue 1 2 3 4 5 - orange x 2 whi te/black 1 2 3 4 5 - 1 2 black/tan black/red black/orange black/yell ow black/green - 1 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 - orange black WN2097ILX + 1 2 3 4 5 6 7 8 9 10 11 12 + BLACK WHI TE/BROWN WHI TE/RED WHI TE/ORANGE WHI TE/YE LLOW WHI TE/GREEN WHI TE/BLUE WHI TE/VI OLE T WHI TE/GRAY WHI TE WHI TE/BLACK + orange/black viol et/brown viol et/red viol et/orange viol et/yell ow viol et/green viol et/blue viol et viol et/gray viol et/whi te viol et/black + WN2086MX + WN2087HX + black/red orange whi te green blue black 1 2 black/red orange whi te green blue black BLACK WHI TE orange/whi te red red/black red/whi te brown/green green/black green/whi te orange/black blue/black blue/whi te brown/red whi te/black whi te/red WN2088LX 2 1 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 red/black red green light blue J10 1 2 3 4 20 J1 1 2 3 4 orange red green blue J2 1 2 3 4 orange/black red/black green/black blue/black J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te J4 1 2 3 4 orange/red black/red whi te/red blue/red J5 1 2 3 4 black red/green whi te whi te/black WN2087HX J6 1 2 3 4 WHI TE/GREEN WHI TE/GREEN 19 WHI TE/YE LLOW TOP TOWER 1 WN2097ILX red/black red green light blue WN2082HX 2 WN2087HX 3 WN2086MX 4 WHI TE/YE LLOW 18 WHI TE/ORANGE WHI TE/ORANGE 17 WHI TE/RED WHI TE/RED D 16 D WN2035X – RESISTOR PCB WHI TE/BROWN BLACK WHI TE/BROWN BLACK WN2035X – RESISTOR PCB red/black red green light blue J6 1 2 3 4 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 red/black red green light blue J10 1 2 3 4 10 tan orange red green blue J2 1 2 3 4 orange/black red/black green/black blue/black J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te 8 yell ow/blue black x 2 yell ow/whi te orange 1 2 3 4 J4 1 2 3 4 orange/red black/red whi te/red blue/red viol et viol et/green black viol et orange/black TICKE T red black 0000 SE LE CT whi te/blue black x 2 V W2053HX red/black red green light blue J6 1 2 3 4 red/black red green light blue J7 1 2 3 4 red/black red green light blue J8 1 2 3 4 red/black red green light blue J9 1 2 3 4 BLACK WHI TE/BROWN WHI TE/RED WHI TE/ORANGE WHI TE/YE LLOW WHI TE/GREEN WHI TE/BLUE WHI TE/VI OLE T WHI TE/GRAY WHI TE WHI TE/BLACK WHI TE/BROWN* WHI TE/RED* WHI TE/ORANGE* WHI TE/YE LLOW* WHI TE/GREEN* 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 black/red orange whi te green blue black orange/red red red/black red/whi te red/green green/black green/whi te orange/black blue/black blue/whi te blue/red whi te/black whi te/red black/red orange whi te green blue black 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 + - - + - 1 orange 2 black 1 2 + + + + + - - - - - + + + + + + - - - - - - orange x 2 yell ow/brown yell ow/red yell ow/orange yell ow green orange black whi te tan red/black red green light blue J10 1 2 3 4 J1 1 2 3 4 5 WN1052X – HIT PA D ASS EMB LY WHI TE/BLUE red black 4 3 2 J2 1 2 3 4 orange/black red/black green/black blue/black J3 1 2 3 4 black/whi te red/whi te green/whi te blue/whi te J4 1 2 3 4 orange/red black/red whi te/red blue/red J5 1 2 3 4 black red/green whi te whi te/black + G R B + G R B 1 2 3 4 5 1 2 1 2 orange/black yell ow/green + G R B + G R B orange red green light blue 1 2 3 4 1 2 3 4 orange/black x 2 brown/red brown/green brown/blue + G R B + G R B + G R B + G R B + G R B orange red green light blue 1 2 3 4 1 2 3 4 orange red/whi te green/whi te blue/whi te orange red green light blue 1 2 3 4 1 2 3 4 orange red/black green/black blue/black #E00724WNB X RGB LE D TAPE S TRI P + G R B + G R B + G R B + G R B WHI TE/BROWN BLACK WN2081LX WN2097E LX WN2085HX + G R B + G R B #E00724WNA X RGB LE D TAPE S TRI P WN2087HX WN2080LX whi te/brown x 2 whi te/red x 2 whi te/orange x 2 whi te/yell ow x 2 whi te/green x 2 red black #E00724WNX RGB LED TA PE STRIP + G R B WN2035X – RESISTOR PCB 1 2 3 4 5 6 7 8 9 10 red black + G R B WHI TE/RED 1 1 2 1 2 3 4 5 6 7 8 9 10 C orange yell ow/brown yell ow/red yell ow/orange yell ow green orange black whi te tan #E00418WNA X WHITE LED TAP E S TRI P + G R B WHI TE/RED WHI TE/BROWN BLACK 1 2 orange red green blue WHI TE/ORANGE WN2087HX 1 2 3 4 5 6 7 8 9 10 11 12 BROWN GRN/YLW BLUE whi te/brown whi te/red whi te/orange black/whi te x 2 orange/black tan x 2 1 2 3 4 5 6 7 8 9 orange yell ow black red/green whi te whi te/black WHI TE/ORANGE orange gray/brown x 2 gray/red x 2 gray/orange x 2 gray/yell ow x 2 gray/green x 2 gray/blue x 2 gray/viol et x 2 gray x 2 gray/whi te x 2 gray/black x 2 1 2 3 4 5 6 7 8 9 DOWN WN2052HX BROWN GRN/YLW x 2 BLUE whi te/brown whi te/red whi te/orange black/whi te orange/black tan whi te/orange whi te/yell ow whi te/green whi te/blue whi te/viol et orange/black black/red black/yell ow yell ow/blue yell ow/whi te black x 2 orange x 2 viol et/blue viol et/whi te GRN/YLW 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + - J1 1 2 3 black 4 whi te 5 tan 6 WHI TE/YE LLOW whi te/viol et black x 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 WHI TE/YE LLOW UP whi te/yell ow whi te/green whi te/blue whi te/viol et orange/black black/red black/yell ow yell ow/blue yell ow/whi te BLACK ORANGE viol et/blue viol et/whi te GRN/YLW 1 orange 2 black 1 2 WHI TE/GREEN whi te/green black x 2 black/yell ow + - green orange red/gray brown/gray 1 2 3 4 5 6 7 8 9 10 11 12 0000 J5 1 2 3 4 WHI TE/GREEN PROG + - WN2098LX WN2035X – RESISTOR PCB whi te/yell ow black black/red + - WHI TE/VI OLE T PROGRAMMING BUTTONS black red 7 LOW TICKE T SWI TCH COIN + #E00788WNB X WHITE LED TAP E S TRI P WHI TE/VI OLE T HH5005 TICKET DISPENSER WHI TE/BLUE LOW TICKE T SWI TCH 1 orange 2 black 1 2 TA2032X DISPLAY WN2081LX viol et/blue 1 black x 2 2 viol et/whi te 3 orange x 2 4 - #E00788WNB X WHITE LED TAP E S TRI P WHI TE/GRAY FLAS HI NG LOW TI CK ET LE D RIGHT + - #E00788WNB X WHITE LED TAP E S TRI P WHI TE/GRAY LEFT + - WHI TE WN2052HX HH5005 TICKET DISPENSER orange x 2 yell ow/orange WHI TE/BLACK LOCK OUT COIL C + - #E00788WNB X WHITE LED TAP E S TRI P orange x 2 yell ow/red J1 1 2 3 4 WHI TE COIN SWITCHES + - WHI TE/BROWN* WHI TE/BLACK 9 + - WN2051HX black/whi te x 2 black red/green whi te whi te/black + WHI TE/BROWN* WHI TE/RED* WHI TE/ORANGE* WHI TE/YE LLOW* WHI TE/GREEN* whi te/red 11 1 orange 2 black 1 2 1 2 3 4 5 black/whi te x 2 J5 1 2 3 4 WN2097E LX WHI TE/RED* WN2087HX FOR DOLLA R BI LL VA LIDATOR WN2085HX WHI TE/RED* orange/black x 2 whi te/brown orange yell ow/brown 1 2 3 4 5 tan x 2 12 whi te/brown whi te/red whi te/orange whi te/yell ow whi te/green orange/black x 2 black/whi te x 2 BROWN whi te/orange black/whi te tan 1 2 3 4 5 6 7 8 9 10 11 12 WHI TE/ORANGE* 1 2 3 4 5 6 7 8 9 10 11 12 BLUE LOCK OUT COIL orange/red black/red whi te/red blue/red WN2087HX COIN LIGHTS 13 WHI TE/ORANGE* WN2085HX orange/black black/whi te orange/black x 2 1 2 3 4 5 6 7 8 9 J4 1 2 3 4 WHI TE/YE LLOW* WHI TE/BROWN* GRN/YLW black/whi te red/whi te green/whi te blue/whi te WHI TE/YE LLOW* orange/red red red/black red/whi te red/green green/black green/whi te orange/black blue/black blue/whi te blue/red whi te/black whi te/red red/black red green light blue J10 1 2 3 4 14 WHI TE/BROWN* WHI TE/RED* WHI TE/ORANGE* WHI TE/YE LLOW* WHI TE/GREEN* J9 1 2 3 4 J3 1 2 3 4 WHI TE/GREEN* 1 2 3 4 5 red/black red green light blue orange/black red/black green/black blue/black WHI TE/GREEN* WN2097ILX 1 2 3 4 5 J8 1 2 3 4 J2 1 2 3 4 WN2087HX brown brown/red brown/green brown/blue brown/gray red/black red green light blue orange red green blue BLACK WHI TE/BROWN WHI TE/RED WHI TE/ORANGE WHI TE/YE LLOW WHI TE/GREEN WHI TE/BLUE WHI TE/VI OLE T WHI TE/GRAY WHI TE WHI TE/BLACK J7 1 2 3 4 J1 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 red/black red green light blue 15 orange/black yell ow/brown yell ow/red yell ow/orange yell ow yell ow/green yell ow/blue yell ow/viol et yell ow/gray yell ow/whi te yell ow/black J6 1 2 3 4 BLACK WHI TE/BROWN WHI TE/RED WHI TE/ORANGE WHI TE/YE LLOW WHI TE/GREEN WHI TE/BLUE WHI TE/VI OLE T WHI TE/GRAY WHI TE WHI TE/BLACK WHI TE/BROWN* WHI TE/RED* WHI TE/ORANGE* WHI TE/YE LLOW* WHI TE/GREEN* 1 2 3 4 5 1 2 3 4 5 brown x 2 brown/red x 2 brown/green x 2 brown/blue x 2 brown/gray x 2 BLACK WHI TE/BROWN WHI TE/RED WHI TE/ORANGE WHI TE/YE LLOW WHI TE/GREEN WHI TE/BLUE WHI TE/VI OLE T WHI TE/GRAY WHI TE WHI TE/BLACK 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 orange yell ow/brown x 2 yell ow/red x 2 yell ow/orange x 2 yell ow x 2 yell ow/green x 2 yell ow/blue x 2 yell ow/viol et x 2 yell ow/gray x 2 yell ow/whi te x 2 yell ow/black x 2 black/tan black/red black/orange black/yell ow black/green 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 orange orange/black viol et/brown viol et/red viol et/orange viol et/yell ow viol et/green viol et/blue viol et viol et/gray viol et/whi te viol et/black red/black red green light blue orange/black gray/brown gray/red gray/orange gray/yell ow gray/green gray/blue gray/viol et gray gray/whi te gray/black black/tan black/red black/orange black/yell ow black/green WN2087HX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 orange orange/black viol et/brown viol et/red viol et/orange viol et/yell ow viol et/green viol et/blue viol et viol et/gray viol et/whi te viol et/black WN2086MX red/whi te brown/whi te AR2007 SP EA KER AR2007 SP EA KER WN2063LX B B 21 31 41 G -- 12 22 32 42 H -- 13 23 33 43 I -- 14 24 34 44 J -- 15 25 35 45 3 1 whi te/brown whi te/red whi te/orange whi te/yell ow whi te/green yell ow/brown yell ow/red yell ow/orange orange orange/black yell ow yell ow/green yell ow/blue yell ow/viol et yell ow/gray +5VDC +5VDC ground ground coin 1 in coin 2 in +12VDC lockout DBV in +12VDC latch data clock ground 1 2 3 4 5 J6 J36 1 2 3 RED RED BLACK 11 left ti cket run -- viol et/whi te 40 F 16 30 14 20 15 10 13 5 left ti cket notch 39 E J1 1 2 3 4 5 6 29 viol et/blue 19 11 9 9 4 right t icket run +12VDC ground 38 D 7 28 J8 18 yell ow/blue 8 yell ow/whi te ORANGE BLACK 3 5 37 C fun li ght 1 2 fun li ght 2 fun li ght 3 4 fun li ght 4 fun li ght 5 6 fun li ght 6 fun li ght 7 8 fun li ght 8 +12VDC 10 +12VDC fun li ght 9 12 fun li ght 10 27 J12 17 3 7 1 2 gray/brown gray/red gray/orange gray/yell ow gray/green gray/blue gray/viol et gray orange orange/black gray/whi te gray/black 36 B fun li ght 11 2 fun li ght 12 fun li ght 13 4 fun li ght 14 fun li ght 15 5 6 fun li ght 16 fun li ght 17 7 8 fun li ght 18 +12VDC 9 10 +12VDC fun li ght 19 11 12 fun li ght 20 fun li ght 21 13 14 fun li ght 22 fun li ght 23 15 16 26 J13 16 1 2 3 4 5 6 right t icket notch J23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 J37 1 RED 2 RED 3 BLACK +5VDC +5VDC ground +5VDC +5VDC ground J38 1 2 3 J24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 RED RED BLACK J CONN J23 6 fun li ght 24 2 fun li ght 25 fun li ght 26 4 fun li ght 27 fun li ght 28 5 6 fun li ght 29 fun li ght 30 7 8 fun li ght 31 +12VDC 9 10 +12VDC fun li ght 32 11 12 fun li ght 33 fun li ght 34 13 14 fun li ght 35 fun li ght 36 15 16 I CONN J26 3 H CONN J24 1 1 G CONN J25 A yell ow/whi te yell ow/black brown brown/red brown/green brown/blue brown/gray viol et/brown orange orange/black viol et/red viol et/orange viol et/yell ow viol et/green viol et/blue 1 J15 F CONN J22 orange whi te green blue black +12VDC latch data clock ground J5 orange whi te green tan black 1 2 3 4 5 +12VDC ticket counter coin count er program button select butt on up button down butt on 1 2 3 4 5 6 7 8 J2 WN2034X orange/black black/yell ow black/red whi te/yell ow whi te/green whi te/blue whi te/viol et A TOP BONUS DISP LA Y BA LLOON DISP LA Y CONN. POS. viol et viol et/gray viol et/whi te viol et/black black/tan black/red black/orange black/yell ow E2034X red green blue +5VDC red green blue +5VDC red green blue +5VDC red green blue +5VDC red green blue +5VDC J3 1 2 3 4 5 6 7 8 9 E WN2080LX red green blue orange red/black green/black blue/black orange/black red/whi te green/whi te blue/whi te black/whi te black/red whi te/red blue/red orange/red red/green whi te whi te/black black black/whi te whi te/brown whi te/red orange/black tan whi te/orange D 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 J14 C 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 fun li ght 37 2 fun li ght 38 fun li ght 39 4 fun li ght 40 fun li ght 41 5 6 fun li ght 42 fun li ght 43 7 8 fun li ght 44 +12VDC 9 10 +12VDC black/green 11 fun li ght 45 12 13 14 15 16 J32 1 sensor i n 2 ground B red green blue orange red/black green/black blue/black orange/black red/whi te green/whi te blue/whi te black/whi te black/red whi te/red blue/red orange/red red/green whi te whi te/black black 3 J30 R. speaker + 1 red/whi te R. speaker 2 brown/whi te +5VDC +5VDC ground ground (audio) ground ground +12VDC (audio) J25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 RED RED BLACK A red green blue +5VDC red green blue +5VDC red green blue +5VDC red green blue +5VDC red green blue +5VDC J22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 red black J31 1 red/gray 2 brown/gray RED RED/BLACK BLACK BLACK/WHI TE BLACK BLACK ORANGE/WHI TE +12VDC L. speaker + L. speaker - ORANGE J39 1 2 3 RGB LIGHT IN TOWER (1 AT BOTTOM) WN2051HX J9 1 2 3 4 5 6 7 8 9 +5VDC +5VDC ground J26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 top spring led 1 middle spring led bottom spring led 3 bumper led “TICKETS ” arrow led 5 red 2 red/black red/whi te 4 red/green green/black 6 right star led 7 green/whi te “WI N” arrow led 8 blue/black +12VDC 9 orange/red +12VDC 10 orange/black 11 left star led 12 blue/whi te “WHACK N’ WI N” led 13 blue/red left “BONUS ” arrow l ed 14 whi te/black right “BONUS ” arrow led 15 whi te/red bonus slot f un light s 16 black/red 17 18 19 20 J10 19 17 15 13 11 yell ow/green 8 red/black orange 10 orange green/black 12 blue/black red/whi te 14 green/whi te blue/whi te 16 brown/red brown/green 18 brown/blue orange 20 orange/black 6 7 inst ruction led outer ri ng red led +12VDC +12VDC outer ri ng green led outer ri ng blue led middle ring red l ed middle ring green led middle ring blue led inner ring red led inner ring green l ed inner ring blue led +12VDC +12VDC 9 yell ow/brown 2 yell ow/red yell ow/orange 4 yell ow WN2082HX red balloon led 1 green balloon led purple balloon led 3 blue bal loon led 5 J11 WN2051HX WN2051HX WN2051HX WN2060LX WN2063LX PO WER ENTRY MODULE DD2007X 3A MDL I O BROWN x 2 G/Y BLUE x 2 BROWN G/Y BLUE 1 2 3 1 2 3 1 2 3 1 2 3 BROWN G/Y BLUE BROWN G/Y BLUE 5VDC POWER SUPPLY #WN2010 RED x 3, RED x 3, RED x 2 BLACK x 2, BLACK x 2 RED & RED/BLACK BLACK x 2 BROWN x 2 G/Y x 2 BLUE x 2 ORANGE/WHI TE ORANGE x 2 BLACK BLACK/WHI TE BROWN GRN/YLW BLUE 12VDC POWER SUPPLY #IA2010 WN2064LX FOR 23 0V OPER ATION: SWITCH POWER SUPPLY FROM 11 5V TO 23 0V SWITCH FUSE FROM 3A TO 1.5A POWER CORD 4 3 PART NO. WN1000X (2 OF 2) WHACK N WIN 3/31/14 2 REVISED 5/21/14 REQUIRED SIGNATURES FILENAME WN1000X SCHEMATIC.VSDX ENGINEER DRAWN BY NICHOLAS BRANCATO MANAGER SYSTEM SCHEMATIC DESCRIPTION DATE TITLE PAGE 2 OF 2 1 VENDOR A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : David M. Bartel Create Date : 2015:03:23 12:29:38Z Modify Date : 2015:03:23 12:29:38Z Title : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:03:23 12:29:38Z Creator Tool : Adobe Acrobat Pro 10.1.13 Format : application/pdf Creator : David M. Bartel Document ID : uuid:f204562e-f0f2-420a-93de-84a9bfb75585 Instance ID : uuid:ac326890-1823-4d90-ba53-2c103389c950 Producer : Adobe Acrobat Pro 10.1.13 Page Count : 20EXIF Metadata provided by EXIF.tools