Arcadyan Technology WN6301D 802.11a/b/g Wireless Notebook Adapter User Manual SNN6500 English

Arcadyan Technology Corporation 802.11a/b/g Wireless Notebook Adapter SNN6500 English

Contents

Users Manual Revised

SNN6500User manual 1EN
2B✔DK ✔E✔GR ✘F✔IRL ✔I✔L✔NL ✔A✔P✘SU ✔S✔UK ✘N✔D✔CH ✔☎HelplineBelgië/Belgique/Belgien/02 275 0701Luxemburg/Luxembourg26 84 3000Danmark 35 25 87 61Deutschland 0696 698 4712España 09 17 45 62 46France03 8717 0033 00800 3122 1223Ireland01 601 1161Italia 02 48 27 11 53Cyprus 800 92256Nederland 053 482 9800Norge 22 70 82 50Österreich 01 546 575 603Portugal0800 831 363Schweiz/ Suisse/ Svizzera02 23 10 21 16Suomi 09 2290 1908Sverige08 632 0016UK (United Kingdom)0207 949 0069European RegulationsThis product has been designed, tested and manufactured according to the European R&TTE Directive 1999/5/EC.Following this Directive, this product can be brought into service in the following states:
4 Important safety information4 Safety Precautions4 Environmental information4 Disclaimer5 What’s in the box6 Introduction6 What are wireless network connections?6 Factors determining your network range and network speed6 Securing your wireless network7 Your Wireless Notebook Adapter 11g True Turbo 108 Mbps8 Install8 Install the drivers9 Install hardware for Windows10 Connect12 Advanced12 Securing your wireless network13 Setup of an Ad Hoc computer network14 Accessing your wireless network setting.14 What do the settings mean17 Network terminology19 Glossary of terms20 Technical specifications20 Troubleshooting23 FCC complicanceContents EN3
EN4• Please install and connect the product in the order as described in the “QuickStart Guide” booklet only. This assures best installation results with the leasttechnical hassles.• Please read this manual and the “Quick Start Guide” booklet carefully beforeusing the Wireless Notebook Adapter 11g True Turbo 108 Mbps; and keep thesedocuments for future reference.• The most recent downloads and information on this product will be availablethrough our web site www.philips.com/support• During set-up and installation, it may be helpful to have the instructions for yourPC and other network components at hand.Safety Precautions• Radio equipment for wireless applications is not protected against disturbancefrom other radio services.• Do not expose the system to excessive moisture, rain, sand or heat sources.• The product should not be exposed to dripping or splashing. No object filled withliquids, such as vases, should be placed on the product.• Keep the product away from domestic heating equipment and direct sunlight.• Allow a sufficient amount of free space all around the product for adequateventilation.• Do not open this product. Contact your Philips retailer if you experiencetechnical difficulties.Environmental informationAll redundant packing material has been omitted. We have done our utmost to makethe packaging easily separable into two mono materials: cardboard (box) andpolyethylene (bags, protective foam sheet).Your set consists of materials that can berecycled if disassembled by a specialised company. Please observe the local regulationsregarding the disposal of packing materials and old equipment.DisclaimerThis product is provided by “Philips”  “as is” and without any express or impliedwarranty of any kind of warranties, including, but not limited to, the impliedwarranties of merchantability and fitness for a particular purpose are disclaimed.In no event shall Philips be liable for any direct, indirect, incidental, special, exemplary,or consequential damages (including, but not limited to, procurement of substitutegoods or services; loss of information, data, or profits; or business interruption)howsoever caused and on any theory of liability, whether in contract, strict liability,or tort (including negligence or otherwise) arising in any way out of the use ofinability to use this product, even if advised of the possibility of such damages.Philips further does not warrant the accuracy or completeness of the information,text, graphics, links or other items transmitted by this product.Important safety information
EN5What’s in the boxWireless Notebook Adapter 11g Trueturbo 108 MbpsQuick Start GuideInstallation CDWhat else you’ll need orNotebook  Wireless Basestation Other wireless devicesPCMCIA portWindows 2000/XP
SNN6500Thank you for purchasing the Philips Wireless Notebook Adapter 11g True Turbo108 Mbps. This Wireless Notebook Adapter 11g True Turbo 108 Mbps is a WiFi(IEEE 802.11a/g) compatible device. It fully supports high data rates up to 108 Mbpswith automatic fallback to lower speeds for secure operation at lower data rates ineven the most difficult of wireless environments.In this manual we will expand on how to install, configure, and use your WirelessNotebook Adapter 11g True Turbo 108 Mbps.This chapter will give you background information on wireless networks and theirsecurity in general.What are wireless network connections?Your wireless network adapter uses a wireless protocol(called IEEE 802.11a/g or WiFi) to communicate with other network computers bymeans of radio transmissions.WiFi radio waves travel outwards from the antenna inall directions, and can transmit through walls and floors.Wireless transmissions cantheoretically reach up to 450 meters in an open environment and reach speeds of upto 108 megabits per second (Mbps) at close range. However, the actual networkrange and data throughput rate will be less, depending on the wireless link quality.Factors determining your network range and networkspeed• The environment: Radio signals can travel farther outside of buildings, and if thewireless components are in direct line of sight to one another. Putting wirelesscomponents in high places helps avoid physical obstacles and provides bettercoverage.• Building construction such as metal framing and concrete or masonry walls andfloors will reduce radio signal strength. Avoid putting wireless components nextto walls and other large, solid objects; or next to large metal objects such ascomputers, monitors, and appliances.• Wireless signal range, speed, and strength can be affected by interference fromneighbouring wireless networks and devices. Electro-magnetic devices such astelevisions, radios, microwave ovens, and cordless phones, especially those withfrequencies in the 2.4 GHz range, may also interfere with wireless transmission.• Standing or sitting too close to wireless equipment can also affect radio signalquality.• Adjusting the antenna: Do not place antennas next to large pieces of metal,because this might cause interference.Securing your wireless networkAs wireless computer networks use radio signals, it is possible for other wirelessnetwork devices outside your immediate area to pick up the wireless signals andeither connect to your network or to capture the network traffic.Therefore, youshould always enable the Wired Equivalent Privacy (WEP) or WiFi Protected Access(WPA) network encryption key to help prevent unauthorised connections or thepossibility of eavesdroppers listening in on your network traffic.For an example of how to secure your network, please see the chapter on “Anexample of how to secure your wireless network”.EN6Introduction
Your Wireless Notebook Adapter 11g True Turbo 108 Mbps EN71 Connector to notebookFor connecting the Wireless Notebook Adapter 11g True Turbo 108 Mbps into aPC Card slot your laptop.2 Integrated antennaBuilt-in antenna for establishing wireless connections.3 Indicator LEDDisplays the network status.LED Colour MeaningLink Blue, Off • Not connected to Notebook switched offBlue, On • Connected to networkBlue, blinking • Scanning for wireless networksActivity Blue, Flashing • Transmitting data4 Label with MAC addressThe designation consisting of 12 characters (e.g. 00:30:F1:A1:F4:A5 or, in general,xx:xx:xx:xx:xx:xx) is the unique MAC address of this network device. Some safetyfeatures or network identification purposes need this MAC address.
EN8InstallInstall the driversPlace the Installation CD in the CD-driveSelect AgreeIf this screen does not appear, start the CD manually1 Open My Computer2 Open CD-drive3 Open Setup.exeClick on the Wireless Notebook Adapter 11g True Turbo 108 Mbps photoClick on Install softwareChoose your situation:Either: Infrastructure (a) Or: Ad-Hoc (b)Click   Click
EN9Wait until you see this windowPlug the Wireless Notebook Adapter 11g True Turbo 108 Mbps into the PCMCIAslot.Install hardware for WindowsEither: Windows 2000• No Additional actions neededOr: Windows XP / Windows XP Service Pack 11 Select Next2 Select FinishOr: Windows XP Service Pack 21 Select No, not this time2 Select Next
EN103 Select Next4 Select FinishClick on finish> Your Wireless Notebook Adapter 11g True Turbo 108 Mbps is ready foruse after the rebootConnectConnect to your networkStart Philips Wireless Network Manager programDouble click on the tray iconIf the Philips Wireless Network Manager does not start, double-click this icon.
EN11View the available wireless networks1 Select Site Survey2 Click on Scan3Double click on your wireless Network NamWhen asked:Input Security credentials1 Select your Authentication Type2 Select your Key Type3 Select Use Passphrase if applicable4 Enter your encryption KeySee the user manual of your basestation on how to identify these securitycredentials.TIP for more information on encryption see “Configuration – sub-tab Security“ onpage 15.Store your profile detailsSelect SaveActivate the current profileSelect Apply Changes
EN12Securing your wireless network.Start Philips Wireless Network Manager programDouble click on the tray iconIf the Philips Wireless Network Manager does not start, double-click this icon.Go to security settings1 Select Configuration tab2 Select Security tab3 Click on Security off, to switch it onInput Security credentials1 Select your Authentication Type2 Select your Key Type if applicable3 Select Use Passphrase if applicable4  Enter your encryption KeySee the user manual of your basestation on how to identify these securitycredentials.TIP for more information on encryption see “Configuration – sub-tab Security“ onpage 15.Store your profile detailsSelect SaveActivate the current profileSelect Apply ChangesConfigure other devicesMake sure other networked devices use the same Network Name (SSID), Ad-Hocwireless mode and Security credentials.Advanced
EN13Setup of an Ad Hoc computer networkStart Philips Wireless Network Manager programDouble click on the tray iconIf the Philips Wireless Network Manager does not start, double-click this icon.Create an Ad-Hoc wireless network1 Click on Configuration2 Click on Common3  Enter the wireless Network Name (SSID)4 Select Ad-Hoc as operating mode5 Select the Network TypeGo to the Security settings1 Select Security tab2 Click on Security off, to switch it onSetup the encryption1 Select your Authentication Type2 Select your Key Type3 Select Use Passphrase if applicable4  Enter your encryption KeyTIP for more information on encryption see “Configuration – sub-tab Security“ onpage 15.Saving the profile settings1 Click on New2 Enter the profile name3 Click OKActivating the new Profile’s settings4 Click on ApplyConfigure other devicesMake sure other networked devices use the same Network Name (SSID), Ad-Hocwireless mode and Security credentials.
EN14Accessing your wireless network setting.Start Philips Wireless Network Manager programDouble click on the tray iconIf the Philips Wireless Network Manager does not start, double-click this icon.What do the settings meanThe Philips Wireless Network Manager program has five main tabs with informationand settings.Note: The Wireless On/Off button appears on the bottom of every tab to give youcontrol over enabling and disabling the wireless link.•ConfigurationThe Configuration tab lets you manage your profiles, and gives you access to yourwireless network and encryption settings.Select profile – A profile is a set of all settings needed for a particular wirelessconnection. If you want to change between wireless networks, you can simply switchfrom one saved profile to the other.Use the New, Save and Delete buttons for managing your profiles.Auto Profile On/OffWhen Auto Profile is On, the New profile and Save profile buttons will bedisabled. After your Apply Changes a profile will automatically be created with yournetwork settings.The Configuration tab contains two sub-tabs:  Common and Security. See belowfor an explanation of the settings of these sub-tabs.•Configuration – sub-tab CommonNetwork Name – Input a wireless network name for the wireless network towhich you want to connect. Alternatively, use the Site Survey tab to choose from thelist of available Network Names. (Default: philips.)Operating Mode – Set the operation mode to Ad Hoc (Peer-to-Peer) for networkconfigurations that do not have a Wireless Base Station, and to Infrastructure forconfigurations with a wireless base station. (Infrastructure is the default setting.)Transmit Rate – Auto will automatically negotiate the highest possible wirelessnetwork speed. Or set a lower speed manually. Lower speeds will give better range.Channel – If you are setting up an Ad Hoc wireless network, set the channelnumber to the same radio channel as that used by the other wireless devices in yourgroup. However, if you are connecting to a network via a base station, then thechannel is automatically set to the channel of the base station to which the adapterconnects. The Channel can only be set when the Operating Mode is set to Ad Hoc(Peer-to-Peer).Power Save – Click the box if you want to use power management to reduce yourportable computer's consumption of battery power and still keep the computeravailable for immediate use.IMPORTANT: All computers and wireless network devices in the same networkshould have the same Network Name (SSID) and the same encryption key forwireless security. In Ad Hoc mode, you must also specify the same radio channel forall wireless devices.
EN15•Configuration – sub-tab SecurityFirst, click the Security ON/OFF button to enable or disable wireless security.Authentication Type – Choose WEP or WPA-PSK depending on the type ofwireless security in the rest of your wireless network.Wired Equivalent Privacy (WEP) and WiFi Protected Access (WPA) areimplemented in the adapter to prevent unauthorized access to your wirelessnetwork.Key Type – For more secure data transmissions, set encryption to the highestnumber of bits. E.g. a 128-bit setting gives you a higher level of security than 64-bit.IMPORTANT: The setting must be the same for all clients in your wirelessnetwork.Use Passphrase –  If Passphrase is selected, security keys for WEP encryption aregenerated from your passphrase string. If encryption is set to 128 bit, only Key 1 isgenerated. If encryption is set to 64 bit, Keys 1-4 are generated.You must use thesame Passphrase and Default Key settings on all the other stations in your network.Note: A passphrase string can consist of up to 32 alphanumeric characters. The WPA (WiFi Protected Access) implemented in this Wireless NotebookAdapter11g True Turbo 108 Mpbs uses an alphanumeric password between 8 and 63characters long. This password may include symbols and spaces. IMPORTANT: Youmust use the same encryption key throughout your network.Apply changes – Click on “Apply changes” to activate the changes you made.Key 1-4 – If the Key Type is set to Hex, the security keys are four 10 digit keys forthe 64-bit WEP setting and four 26-digit keys for the 128-bit WEP setting.(The hexadecimal digits can be 0~9 & A~F, e.g. D7 0A 9C 7F E5.)Default Key – Choose the Key ID that has the encryption string you prefer. If youare using a key generated from the passphrase, you must use the same passphraseand key on each wireless device.•Link informationThe Link information tab displays information on the wireless network name(SSID) to which there is a wireless connection: the signal strength, Throughputhistory, current connection speed, channel and Basestation Name ID (MAC).•IP informationThe IP information tab displays information on the Host Name, IP Address, IP Netmask, and Gateway.This window also contains buttons for releasing and renewing the IP address. Thisis done to bring a computer back onto the network after moving it to a differentlocation, or after experiencing an unexpected outage. First release, then renew the IP address. Computers on DHCP networks often (butnot always) re-establish network connectivity automatically.
EN16•Site SurveySelecting the Site Survey tab displays a list of available wireless network access points.Next, click Scan to update the list.It shows you the following information:• Network type shows the network setup• The name of the wireless connection (Network Name, or SSID)• Network mode shows which WIFI standard is used• An icon reflecting if encryption is enabled• Signal strength• Channel that is used by the network• MAC address of the deviceDouble-click one of the network names to open the Profile Wizard for establishing awireless connection with that network.•Version informationSelecting this tab displays vendor and version information.
EN17Read this chapter if you want to know how to interpret the terminology used in thismanual.A network provides a means of communication between two or more computers(and other devices) that are connected to each other through wired or wirelessmeans.At each computer, you will need a network adapter or Network Interface Card(NIC) to be able to connect the computer to the network cable. Examples are:Ethernet cableEthernet notebook adapterAlready built-inAt each computer, you will need to install a WiFi wireless adapter to be able toconnect to another wireless enabled device. Examples are:Wireless USB AdapterWireless notebook adapter 11gAlready built-inNetwork terminologyWIREDETHERNETWIRELESS
EN18In a network, the computers need to be able to connect to each other physically.Therefore, another important network property is how the computers connect toeach other, either directly or through a central device. ONE-ON-ONE WIRED NETWORKalso known as: Direct connection (max. 2 PCs)NOTE: Use a crossover Ethernet cable to connect two computers directly to eachother.WIRED NETWORK WITH MORE THAN 2 PCsUse a hub or switch to connect more than 2 PCs to each other.NOTE: Use straight-through Ethernet cables to connect the computers to thecentral device (hub/switch).HOW TO INTERCONNECT WIRED NETWORKSUse a gateway router to connect one network to another (e.g. to the Internet, alsoknown as WAN).ONE-ON-ONE WIRELESS NETWORKalso known as: Ad Hoc / Peer-to-Peer WIRELESS NETWORK WITH MORE THAN 2 PCsalso known as: Ad Hoc / Peer-to-PeerThe wireless medium forms a hub in and of itself. No hardware hub is needed.CONNECTING WIRELESS TO WIRED NETWORKSalso known as: Infrastructure / Access PointUse a wireless base station.Central devices, like a hub, switch, router or wireless access point may be stand-alone devices or built into a computer.•A hub has multiple ports and serves as a central connection point forcommunication lines from all computers on a wired network. It copies all dataarriving at one port to the other ports. A switch is similar to a hub, but is able tohandle different network speeds at each port.•Gateway routers and wireless access points route network traffic from onenetwork to another (e.g. from a wired network to the Internet, or from awireless network to a wired network or to the Internet).
EN19Glossary of termsDHCP Dynamic Host Configuration Protocol. This protocol automaticallyconfigures the TCP/IP settings of every computer on your home network. DNS Server Address DNS stands for Domain Name System, which allows Internethost computers to have a domain name and one or more IP addresses . A DNSserver keeps a database of host computers and their respective domain names and IPaddresses, so that when a domain name is requested , the user is sent to the properIP address. The DNS server address used by the computers on your home networkis the location of the DNS server your ISP has assigned.DSL Modem DSL stands for Digital Subscriber Line. A DSL modem uses yourexisting phone lines to transmit data at high speeds.Ethernet A standard for computer networks. Ethernet networks are connected byspecial cables and hubs, and move data around at up to 10 million bits per second(Mbps).HPNA Home Phone line Networking Alliance, which is an association ofcorporations (including ) working to ensure the adoption of a single, unified phoneline networking standard. Your Home Connect home network gateway is compliantwith HPNA Specification 2.0, which allows networking speeds of up to 1 million bitsper second (Mbps) using your existing home phone lines.IP Address IP stands for Internet Protocol. An IP address consists of a series of fournumbers separated by periods, that identifies an single, unique Internet computerhost. Example: 192.34.45.8.ISP Gateway Address(see ISP for definition). The ISP Gateway Address is anIP address for the Internet router located at the ISP's office. This address is requiredonly when using a cable or DSL modem.ISP Internet Service Provider. An ISP is a business that provides connectivity tothe Internet for individuals and other businesses or organizations.LAN Local Area Network. A LAN is a group of computers and devices connectedtogether in a relatively small area (such as a house or an office). Your home networkis considered a LAN.MAC Address MAC stands for Media Access Control. A MAC address is thehardware address of a device connected to a network.NAT Network Address Translation. This process allows all of the computers onyour home network to use one IP address. Using the NAT capability of the HomeConnect home network gateway, you can access the Internet from any computer onyour home network without having to purchase more IP addresses from your ISP.PPPoE Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a methodof secure data transmission originally created for dial-up connections; PPPoE is forEthernet connections.Secondary Dial-Up A secondary dial-up phone number is used by your ISP in caseyour primary dial-up number has too many other customers accessing it. Thesecondary dial-up phone number will be used if your primary dial-up phone numbercannot be accessed. SPI Stateful Packet Inspection. SPI is the type of corporate-grade Internet securityprovided by your Home Connect home network gateway. Using SPI, the gateway actsas a "firewall," protecting your network from computer hackers.Subnet Mask A subnet mask, which may be a part of the TCP/IP informationprovided by your ISP, is a set of four numbers configured like an IP address. It is usedto create IP address numbers used only within a particular network (as opposed tovalid IP address numbers recognized by the Internet, which must assigned byInterNIC).TCP/IP Transmission Control Protocol/Internet Protocol. This is the standardprotocol for data transmission over the Internet.WAN Wide Area Network. A network that connects computers located ingeographically separate areas, (i.e., different buildings, cities, countries). The Internetis a wide area network.
EN20Technical specificationsRadio IEEE 802.11a/gRadio Technology Direct Sequence Spread Spectrum(DSSS)Orthogonal Frequency DivisionMultiplexing (OFDM)Antenna Type Built-in antennaData Rate 1 / 2 / 5.5 / 6 / 9 / 11 /12 / 18 / 24 / 36 /48 / 54 / 72 / 96 / 108 MbpsHost interface Cardbus PC Card type IIPower consumption send / receive Approx. 650 mA / 360 mADimensions(h x w x d)  7 x 47 x 104 mmWeight Approx. 35 gOperating Temperature 0 ~ 55°CStorage Temperature –20 ~ 75°CHumidity 5 ~ 90% non-condensingTroubleshootingPlease, check the following troubleshooting items and our web sitewww.philips.com/support before contacting our technical support.Problem Possible cause SolutionADAPTER INSTALLATION PROBLEMSYour PC cannot find Notebook Adapter  Make sure the Notebook Adapter  the Wireless Notebook not connected. is securelyconnected to the USB  Adapter or the net- connectors of both the adapter and work driver does of your PC.not install correctly. Notebook Adapter  Check for any hardware problems,damaged such as physical damage to theadapter's connector.Notebook Adapter   Try to connect the adapter to or port defective.  another PC Card slot or port. If this also fails, test your laptop withanother Wireless Notebook Adapter11a/g that is known to operatecorrectly.Conflicting network If there are other network adapters adapters. in the laptop, they may be causingconflicts. Remove all other adaptersfrom the laptop and test the wirelessadapter separately.If it still does not work, try re-installing the Wireless Notebook Adapter 11g fromthe original Installation CD. Restart your PC.
EN21Problem Possible cause SolutionNETWORK CONNECTION PROBLEMSIf the Link LED on  PC or other network Make sure the computer and other the Wireless Notebook devices switched off. network devices are receiving power.Adapter 11g True Turbo 108 Mbps does not light, or if you cannot access any network resources from the computer.No access to a Service unavailable. Check that you have enabled and Windows or Net- configured the service correctly.Ware service on the If you cannot connect to a particular network. server, be sure that you have accessrights and a valid ID and password.If you cannot access the Internet, besure you have configured your systemfor TCP/IP.If your wireless Base Station / Access  Make sure the access point that the adapter cannot Point is switched off. station is associated with is powered communicate with a on.computer in the Range too long  Reposition your Wireless Adapter.network when (weak radio signal).configured forInfrastructure mode. Wrong settings Make sure the SSID and the networkencryption key are the same as thoseused by the wireless access point.Network speed  Other network  Make sure all network components does not  components are  are suitable for high network speeds.exceed 11 Mbps. unsuitable for higher network speeds.
EN22English  Hereby, Philips Consumer Electronics, BLC P&A CC, declares that this SNN6500 isin compliance with the essential requirements and other relevant provisions ofDirective 1999/5/EC.Finnish Philips Consumer Electronics, BLC P&A CC vakuuttaa täten että SNN6500 tyyppinenlaite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivinmuiden ehtojen mukainen.DutchHierbij verklaart, Philips Consumer Electronics, BLC P&A CC dat het toestelSNN6500 in overeenstemming is met de essentiële eisen en de andere relevantebepalingen van richtlijn 1999/5/EG.French Par la présente, Philips Consumer Electronics, BLC P&A CC, déclare que l'appareilSNN6500 est conforme aux exigences essentielles et aux autres dispositionspertinentes de la directive 1999/5/CESwedish Härmed intygar, Philips Consumer Electronics, BLC P&A CC, att denna SNN6500står I överensstämmelse med de väsentliga egenskapskrav och övriga relevantabestämmelser som framgår av direktiv 1999/5/EG.Danish Undertegnede Philips Consumer Electronics, BLC P&A CC erklærer herved, atfølgende udstyr SNN6500 overholder de væsentlige krav og øvrige relevante krav idirektiv 1999/5/EFGerman Hiermit erklärt Philips Consumer Electronics, BLC P&A CC die Übereinstimmung desGerätes SNN6500 mit den grundlegenden Anforderungen und den anderenrelevanten Festlegungen der Richtlinie 1999/5/EG.Greek  O Philips Consumer Electronics, B.U. Peripherals Accessories   O SNN6500 O  O  O    O    O 1999/5/Italian Con la presente Philips Consumer Electronics, BLC P&A CC dichiara che questoSNN6500 è conforme ai requisiti essenziali ed alle altre disposizioni pertinentistabilite dalla direttiva 1999/5/CE.Spanish Por medio de la presente, Philips Consumer Electronics, BLC P&A CC, declara que elSNN6500 cumple con los requisitos esenciales y cualesquiera otras disposicionesaplicables o exigibles de la Directiva 1999/5/CEPortuguese Philips Consumer Electronics, BLC P&A CC declara que este SNN6500 estáconforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
23FCC compliance This device complies with Part 15 of the FCC Rules (U.S.A.). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment to an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.IMPORTANTAny changes or modifications to the equipment by the user not expressly approvedby the guarantee or manufacturer could void the user's authority to operate suchequipment.EN
Guarantee certificateCertificat de garantieGarantiescheinGarantiebewijsCertificado de garantiaCertificato di garanziaCertificado de garantiaGarantibevisGaranticertifikatGarantibevisTakuutodistus220682Type:  SNN6500Serial nr:  _____________________________________________________________________Date of purchase - Date de la vente - Verkaufsdatum - Aankoopdatum - Fecha de compra - Date d’acquisito - Data da adquirição - Gía a - Inköpsdatum - Anskaffelsesdato - Kjøpedato - Oatopäivä - year warrantyannée garantieJahr Garantiejaar garantieaño garantiaanno garanzia år garantiår garantiår garantivuosi takuuaño garantiaDealer’s name, address and signatureNom, adresse et signature du revendeurName, Anschrift und Unterschrift des HändlersNaam, adres en handtekening v.d. handelaarNombre, direccion y firma del distribudorNome, indirizzo e firma del fornitore!a"#$, %&'( )a& (#a* "( #. #'("Återförsäljarens namn, adress och signaturForhandlerens navn, adresse og unterskriftForhandlerens navn, adresse og unterskriftJälleenmyyjän nimi, osoite ja allekirjoitusNome, morada e assinature da loja
26Specifications are subject to change without notice.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.2005 © Koninklijke Philips Electronics N.V. All rights reserved.www.philips.com3122-377-0241.1FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Navigation menu