Ardi Technology S04A01 Wireless Electronic Tracker(2.4GHz) User Manual 401

Download:
Mirror Download [FCC.gov]
Document ID	1119141
Application ID	3mT9rrHpVAVMwU7TQVUF7A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	208.62kB (2607804 bits)
Date Submitted	2009-06-04 00:00:00
Date Available	2009-06-04 00:00:00
Creation Date	2009-03-03 09:14:22
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-06-03 15:30:38
Document Title	401 User Manual (转曲).cdr
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Getting Started
Pet-Tra c ker U se r M 3 I1 u al 1. For the first time use. please take ollthe plastic isolation piece in the Masterwhich set between the battery
cover and battery And. please set the battery into Slave according to the drawmg otbattery installment
2. Clip the Daring into the hanging hole olthe Slave then set on collar.
3 Place the Masterand Slave no more than 10cm apart
4 Switch the power button of Master and Slave to “ON" at the same time
5. Make sure the signal indication LED on Master and Slave Hashes every second and synchronously
uanging hale a Set the Slave coming with collar orthe valued goods togetherwhat you wantto guard orlind it out. such as
dog. luggage. Notebook. bike etc And, put the Masterwilh you or clip on your belt clip
[Suggested setting place]
Master slave
Flam Enk
signal lndlnatlun
LED WWW 7signalindieaiion
a Distanceindicatien
(Sllenlsearcmflg
undelnurmal
sczmhlhq model
searen button
power on
w r " Master Sh“
v —Pawcrnm5llcntmnflbl P0 ¢ °
— Master /
7 llyou heara high beep alarm irom the Master. it means thatdistance between the Masterand slave has
been averthe sale stage Please check where is the Slave which you set it With your valued goods already
important: Masterwill keep high alarm till the distance between Masterand Slave is re-linking within 50cm
again
5. Farms searching to Slave. please make a short press on “Search/Distance button“ or Master. IHhe distance
between Master a Slave is more closer, the number olLED Will light more and the melody lrom the Master
6 Removelhesmewlmmme battery covert” b Pul3pcs ballerieslnw vvill be more rapid Contrarivvise. itthe distance between Master&$laveislarther. the number otLElell
masterflfld‘fike OW"? COW “Make memelflstallmenwwefim" Of lightless andthe meladytrom the Materwill be slower you maytollow up LED and melddyindioatidntatind
positive (a) & negative (-) or battery are lollowed m We Slave
“P We “WWW “W“ °" “9 WW“ °f ”New important: a )While you are searching. please take the Master to make a turn to leereM directions ler
“hm“- compare the poweralsignals. lritgoes rightdirectibn, the MasterWill show more number
oi LED lights with more rapid melody
a. Take oltthe battery coverand set the battery b Set back the battery cover
into b.) When the distance between Masterand Slave are closer but search to wrong direction, whole
"Make we the V‘Sfa'mle'“ Memo" 0’ green LED on MasterWill put out suddenly and only light by red LED For this moment, you
905m“ (‘1 & "398mm H 0' “New we may make a turn to ditterentdirections ltyou go back to right dlrection, the green LED will
“MW” “P "W “WWW “we“ °“ “9 light up again and shawthe distance immediately.
b°“°"‘ “WNW “WML c ) ll you want to step seaching, please make a short press on "Search/Dlslance button" on
Master again
Mastersets ec slave sets ec
" p d.)Underthe searching stage,the SlaveWill make high beepeach second ltalsocan assist
size '53x42x17mm size -dim 45x12mm _
you to lind out ll's pasiton by your sense oi hearing when Masterand Slave are very close
Frequency .2.AGHz ISM Frequency .2.AGHz ISM
(Suggesllcn You can make along press to the distance button on Masterlorturning ottthe
Battery . 303/AG13/LR44 X apes Battery .CR2032x l pc
search melody an Master temporarily. Once you stop pressing the button ol LED light, the
SWitch (l) :Puwer cn/olf SWitch :Puwer an/olf searching maladywm mums agaln)
Button (1) - Distance Detection status Status LED '1 LED
9. Forlne sllerll mode, please much the power button at Masterto OFF when you dan't need the guard servtce
B“"°”(2) 'LED “WWW" or searching stagetemporarily. Once you need this kitto resumethe standby mode.justturn the power
S‘EWS/ DVECUD" LED “5 LEDS button at Master to ON The Masterwlll auto link to Stave
LED Light .lWhile LED
important: a ) Please keep the Slave at ON stage ityou want (a turn the Master inte silent mode.
b )Alteryou svvitcn this klt from silent mode to normal work stage and hear high alarm sound. it
rneansthatdistance between the Masterand Slave has been oyerthe safe stage but under
detective range. You can press the button the distance (search bottonlto asslstyuu find out
the slave soon
to. it you hear short high beeps everysecond continuously when it is understandbyarunrstlentoralarm mode.
it means that Slave has been out oldetective range D~120m.
11 When the battery is low. you wlll hearthe low beep sound every second continuously. please change the
battery snort.
important: lfthis kit is under low battery stage it may cause abnormal display to alarm. beeps or
nnnerrktng to confuse actual wDrktng stage
Button Function 8. LED indication
Function Operation LEDtndication soundlndication
pawerorr UllttelStalldbylllude sivitcn ’wael'buttoll melt x x
Under Close mode. switch Power signal indictation LED liashs
PM” 0" button to On RED light every second. x
Under Standby mode. when distacne signal indictation LED llashs High beeps every second
Alarm between Masteratslave is outof
REDl hte er second
0~3o meter ‘9 V y
When Master is alarm. shorten the
Stop Alarm distance between Master and Slave
Within 50 cm
signal indictation LED llashs No beeps
RED light every second
Distance between Master& slave is more closer
More LEDIlghtuD. Modety is more rapld.
Distance between Master 8 Slave is farther
LE D lights decreaslngly. Modely is slowerand dininuendo
u n d e y m n d by mad 6‘ press me Distance between Master sslive is closerbutsearch to wrong dl'lectiait
Search
“Distance“ [Moan contingaiiy WholegieenLEDputsoutsuddenly Short beep every second
Out oldetecfinri range
Modely is slower and short
beep every second
signal indictation LED llashs
RED lightevery second.
Turn off the search melody oftfasterflong press to LED bultnn)
Keep showing the distance indication Mute temporarily
lent understandbynode suitcn the pnwelbutln’ltnOFF x x
u".suem UnderSilentniode.swttchthepowerbuttontoou signalindictationLEDflasthEDlight ngnbeepsdurlngreallnklng
Masterandslaveareoutoldetectivelangemlmrn signalindictation Lnglasns
Disconnect The connect iagne depends on the leiiain 5 times every saw“,
environment because at radio wave elliciency
Ahigh Beep alter RED signal
indication LED flash 6tlnles
every second
Bamry |°w signal indictation LED llashs Short beep every second
RED light every second.
Care and maintenance
(a) Keepthedevice dry. Precipitation. humidity. and alltypes ofliguids orrnoisture can contain mineralsthat
Wlll corrode electronic circuits lfyour device does getwet. remove the battery. and allowthe deVice to dry
completely before replacing it
(b) Do not use or store the device in dusty. dirty areas. lls moving partsand electroniccomponents can be
damaged
to) Do not store the device in hot areas ngh temperatures can shorten the life ofelectronicdevices. damage
batteries. andwarp or melt certain plastics
(d) Do not store the device in cold areas When the device returnsto its normal temperature. moisture can form
inside the device and damage electronic circuit boards
(e) Do not attemptto open the deVice otherthan instructed in this guide.
(f) Do notdrop. knack. Drshake the device Rough handling can breaklnlernal circuit boards and fine mechanics
(9) Do not use harsh chemicals. cleaning solvents or strong detergents to clean the device.
(h) Do not paint the device. Palnt can clog the movlng parts and prevent proper operation.
(l) Do not put Masterand Slave atsame place in case ofthis set is unable playing functions to guard your
valued goods.
(1) Tnewolklnglange.alarmrange.searchinganddetectlonaredependstheterralnenvernmentbecause
cfradiowave efficiency
(K) tlthe beeps sound are not loud enough. itmay meansthe battery law. Change new battery rorlouder
alarm sound
(l) This productonlyassistas to providethewarning alarm forremindingthe user ltdoes notguarantee to
preventstealorrobby personalsaletyand property ilany urgentneed This productdoes notguarantee
any damage of personal safety. property. material orthe information loss. or other related loss
(m) Ityou wanttoapptythis productduringthe flight trip. please comply with the ilightsafety lawaccordingto
each country.
(it) Wereservetherightinchangingthespecification ofthe hardware and software designsto manualsatany
timeand Withoutpriornotice informationinthis documentissubiecttochangewdhoutnotice
(o) This product operational temperature is between 0”C ~ l55‘C storage temperature is between
-10'C~ tent.
Recycle: The Battery provlded in this product should be recycled to protectthe local enirironment Please
contact With local recycle department for detail
Warning: Do not put the battery into the fire or heat resource. it will be cause dangerous or even explusmn
FCC Certifications
Federal communitarian Cammisslan Interlerence Statement
This equipment has been tested and improved to comply With the limits of a Class B digital
devlce. pursuant to F'art 15 ottne FCC Rules These llntlts are destgned to pravlde reasonable
protection against harmful interference in a residential installation. This equipment generates.
uses and can radiate radio frequency energy. if installed and used not in accordance With the instructions. may
cause harmlul lnterlerence In radio communlcatlons However. there is no guarantee that lnterlerence WlII not
occur in a particular installation ll this equipment does cause harmful interference to radio ortelevision
reception. which can be determined byturning the equlpntentofland on. the useris encouraged to tryto correct
the interference by one ofthe following measures
I Reorient or relocate the receiVing antenna
I increase the separation between the equipment and receiver
I Connect the equlpment lnlo an outlet on a etrcutt different from that to wnlcn the receiver ls cunnected
I Consult the dealer or an experienced radlo/TV tecnntctan for help.
This deVlCe complies with Part 15 ofthe FCC Rules Operation is subject to the folloiiving two conditions
(1) This device may not cause harmful interference. and (z) thisdevicmus acceptan interference received.
including interterence that may causeundesired operation.
FCC Caution Any changes or modifications are notexpressly approved bythe party responsible for compliance
which could void the user‘s authorityto operate this equipment
Eu Declaration Conformity
This product is carrying the CErMark in accordance With the related European Directives.
91E702A97u50600

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2009:03:03 09:14:22+08:00
Modify Date                     : 2009:06:03 15:30:38+08:00
Producer                        : Acrobat Distiller 7.0 (Windows)
Creation Date                   : 2009:03:03 09:14:22+08:00
Mod Date                        : 2009:06:03 15:30:38+08:00
Author                          : Administrator
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2009:06:03 15:30:38+08:00
Document ID                     : uuid:44f26e38-a967-442f-9ca9-a6c7ad4cb020
Instance ID                     : uuid:be16032c-96b7-4327-ab24-b6e9861b01f5
Format                          : application/pdf
Creator                         : Administrator
Title                           : 401 User Manual (转曲).cdr
Page Count                      : 2
Has XFA                         : No

EXIF Metadata provided by EXIF.tools