Ariens Snow Blower 921013 Users Manual 03882700G_921_DOM
921013 to the manual 42d57ba7-e281-40ea-94f4-43536565e4d5
2015-01-24
: Ariens Ariens-Snow-Blower-921013-Users-Manual-232580 ariens-snow-blower-921013-users-manual-232580 ariens pdf
Open the PDF directly: View PDF
Page Count: 42
- TABLE OF CONTENTS
- INTRODUCTION
- SAFETY
- ASSEMBLY
- CONTROLS and FEATURES
- OPERATION
- MAINTENANCE
- MAINTENANCE SCHEDULE
- SERVICE AND ADJUSTMENTS
- a. Start unit.
- b. Shift speed selector into the first forward speed.
- c. Engage the traction clutch. Unit should move forward.
- d. Stop unit.
- e. Shift speed selector into first reverse speed.
- f. Engage the traction clutch. Unit should move backward.
- g. Shut off unit.
- a. Loosen jam nut on cable.
- b. To increase spring extension adjust barrel down the cable and tighten jam nut.
- c. To decrease spring extension adjust barrel up the cable and tighten jam nut.
- a. To increase brake pad gap, loosen idler adjustment nut, and move idler away from belt. Position idler to achieve a 1/16 in. (1.6 mm) minimum brake pad gap and a 1/2 in. (12.7 mm) minimum gap between the plastic roller and the frame.
- b. Check the clutch cable spring extension and adjust as necessary to achieve a 1/2 – 9/16 in. (12.7 – 14.3 mm) spring extension.
- c. If the cable needed adjustment, recheck gaps described in step 2a. Repeat steps as necessary until brake clearance, roller gap and spring extension are within specified ranges.
- a. With the traction drive clutch lever disengaged, loosen the jam nut on the cable adjuster.
- b. Turn the adjuster body up the cable to decrease the distance between the clutch lever and handlebar.
- c. Turn the adjuster body down the cable to increase the distance between the clutch lever and handlebar.
- STORAGE
- SERVICE PARTS
- ACCESSORIES
- TROUBLESHOOTING
- SPECIFICATIONS
- SPECIFICATIONS
- Three-Year Limited Sno-Thro® Warranty