Aroot LK-P31 Mobile Printer User Manual manual

SEWOO TECH CO., LTD. Mobile Printer manual

manual

Download: Aroot LK-P31 Mobile Printer User Manual manual
Mirror Download [FCC.gov]Aroot LK-P31 Mobile Printer User Manual manual
Document ID1494609
Application IDO9RO9xzeo98obi+7+P7jAQ==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize90.25kB (1128115 bits)
Date Submitted2011-07-05 00:00:00
Date Available2011-07-05 00:00:00
Creation Date2011-07-01 08:57:23
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2011-07-01 08:57:38
Document Titlemanual
Document CreatorAdobe InDesign CS4 (6.0.6)

SEWOO TECH CO.,LTD.
Doosung BD, 689-20, Geumjung-dong, Gunpo-si, Gyeonggi-do, 435-862 South Korea
TEL : +82-31-459-8200 FAX : +82-31-459-8880
www.miniprinter.com
MODEL : LK-P31
MOBILE PRINTER
Rev. 1.0
All specifications are subject to change without notice
Table of Contents
1. Unpacking
2. Product overview
3. Usage and Installation
3-1. Control panel usage
3-2. Battery Installation
3-3. Battery removal
3-4. Battery charging
3-5. Battery charger usage
3-7. Roll paper installation
38. Self test
10
4. Peripherals connection
12
4-1. Bluetooth connectiontion
12
4-2. Interface cable connection
13
5. Printer specification
5-1. Specification
6. Certification
14
14
16
2. Product overview
1. Unpacking
Standard
Front
Power
switch
Control
Panel
Printer
Open
Button
Paper feed
button
Battery
Charger
USB Cable Shielded
Rear
USB
Roll paper
CD
Quick Manual
Optional
Battery
Battery Holder (Cradle)
Shoulder strip
3. Usage and Installation
3-1 Control panel usage
3-2 Battery Installation
Hook
Button
Name
Power
button
This button is used to turn the printer on and off.
When the printer is off, press this button for approximately 3 seconds
and it will turn on the power. When you press this button in a state
that the printer is on, the printer will turn off.
Paper
Feed
Button
Paper output can be done manually by pressing this button.
Additionally, self-testing and Hexadecimal Dumping can be
processed..
1. Refer to “3-10” for self test information.
2. Refer to the service manual regarding Hexadecimal Dumping.
Battery
Status
Lamp
1. If the Batt, LED are Lit, the battery is fully charged.
2. If you can hear beeping sound and LED light is turned off, it means
that the battery is at the lowest level.
3. If the battery is not charged at all, the printer turns off
automatically.
Error
Lamp
function
1. Align battery hook as shown in the picture
2. Push the battery into the printer until it locks in place.
NOTE
As the battery is not charged at the time of your purchase, charge the
battery prior to using the printer
(Battery charger or Cradle can be used to charge)
☞CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions
If the red light is turned on, it means there is no paper roll or the
paper cover is open.
3-3 Battery removal
3-4 Battery charging
Lamp
After putting up the belt clip, remove the battery holding it up as shown above.
1. Be sure that the printer is turned off
2. After open the DC JACK cover, insert DC JACK into the printer.
3. Plug the power code to electrical outlet.
3-4-1 The status of lamp in charging
Status
charging
charging complete
Charging Lamp
Red
Green
NOTE
1. Unless the exclusive charger is used provided by the manufacturer, the printer
can be damaged, and the manufacturer is not liable for the consequential damage.
2. Before removing the battery, make sure that power is turned off.
3. Printer does not work in the status of being connected with charger only.
4. The battery should be installed to operate printer.
5. While charging, do not turn on the power.
6. Do not operate the print while charging the battery.
7. Do not connect the charger while the printer is operated.
3-5 Battery charger usage
3-6 Roll paper installation
Optional
Lamp
DC Jack
1. Insert the battery into the battery holder as shown above
2. Connect the DC JACK to the power electrical outlet.
Press the PUSH button to open
the paper cover
Insert the paper in the right
direction
1 2
3 4
3. Plug the power code into the electrical outlet.
4. Once the charging is completed, remove the battery from the holder.
3-5-1 The status of lamp in charging
Status
charging
charging complete
Charging Lamp
Red
Green
NOTE
In the case the battery is not fixed properly in the holder, the red lamp will be
blinking, Then, extract and reinsert the battery.
Pull a short length of paper out of
the printer and close the cover.
Tear off the additional paper using
tear bar.
3-7 Self Test
The sample of self test printout
Turn off the power pressing the
power button for approximately
3 seconds.
While you are pressing the FEED
button, press the power button
1 2
NOTE
1. To print ASCII pattern additionally,
press the Feed button once more
2. After printing ASCII pattern, the
self test will be finished automatically.
3. If the Feed button is not pressed
to print ASCII pattern, self test will be
finished automatically after 30 seconds.
When the printer is installed initially or when you face a problem, you can run the
self test and check the information about
-Control Circuit, Mechanism, Print Quality, ROM Version
After checking with self-test and no issues are found, you can examine other
devices and software. This function is working independent of devices and software.
● Motor protection from being overheated
The motor should be stopped and cooled about more than 30 seconds after
continuous printing 1.5 meter
The printout is produced.
10
11
4. Peripherals connection
This printer can communicate with Peripherals device via Bluetooth
and cables.
4-2 Interface Cable Connection
4-1 Bluetooth Connection
USB
1. Printer can be connected to the PDA and PC which can do wireless
communication.
2. By using Bluetooth function supported in PC, printer can be connected.
NOTE
Refer to the Bluetooth Manual for more details on connection.
12
1. Connect USB into the cable connector on the printer.
NOTE
Use the cable offered by the manufacturer (USB)
2. Connect the interface cable into the USB port of the device
(PDA, PC, etc.)
13
5. Pritner Specification
5-1 Specification
Size
Printing Method
Direct Thermal
Printing Speed
60mm/sec
Resolution
203 DPI X 203 DPI
Character
Font A (12X24), Font B (9X17)
Character per line
Font A : 48pt , Font B : 64pt
Character set
ALPHA NUMERIC Character, Extension
Character
Barcode
EAN-8, EAN-13, Code39, ITF, UPC-A,
Codabar, Code93, Code128
110 X 105 X 30
W X D X H”
4.3 X 4.1 X 1.2
310g
Weight
Environmental sealing
IP42
Temperature
operation
-10 ~ 50℃
storage
-20 ~ 60℃
operation
35 ~ 95%
storage
10 ~ 95%
Frequency
2402 ~2480 MHz
Humidity
BT
Emulation
ESC/POS
Number of Channels
79
Driver
Window CE 4.2&5.0, Window Mobile 5.0
Channel Spacing
1 MHz
Sensor
Paper End Sensor , Cover Open Sensor ,
Black Mark Sensor
Type of Modulation
GFSK (1Mbps)
Paper
Reliability
paper type
Thermal Paper / Label
width
80mm
thickness
0.065mm
External Diameter
Max. Φ25mm+/-0.5mm
Internal Diameter
8.5mm +/-0.5mm
TPH
50km
Battery
Continuous Printing 40~50min
Standby: 11hour
USB, Bluetooth Class2
Communications
Battery Charger
Battery
14
W X D X H(mm)
input
AC100~240V, 50/60Hz
output
8.4V , 800~1400mA
Battery type
Li-ion
output
7.4V, 1130mAh
Charging time
2~3hours
15
6. Certification
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to
the following two conditions:
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe [B] est conforme a la norme NMB-003
du Canada.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation of the
device.
NOTE
This equipment has been tested and found to comply with the limits for CLASS B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instuctions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try correct the interference by one
or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from
that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
16
17

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e64b0548-2ee7-4028-8457-b681a1a019dc
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Create Date                     : 2011:07:01 08:57:23+09:00
Metadata Date                   : 2011:07:01 08:57:38+09:00
Modify Date                     : 2011:07:01 08:57:38+09:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 3626 bytes, use -b option to extract)
Instance ID                     : uuid:06203b8e-64e1-42b3-93d2-2f50b4d7bcb8
Document ID                     : xmp.did:1C2A1C110D93E011AE72AAF81CDE2A14
Rendition Class                 : proof:pdf
Original Document ID            : adobe:docid:indd:195918eb-e9e2-11de-95ca-97eea34a3199
Derived From Instance ID        : xmp.iid:1B2A1C110D93E011AE72AAF81CDE2A14
Derived From Document ID        : xmp.did:6033FC5CEE80E0118F92C555CC27DC28
Derived From Original Document ID: adobe:docid:indd:195918eb-e9e2-11de-95ca-97eea34a3199
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:5F33FC5CEE80E0118F92C555CC27DC28, xmp.iid:6033FC5CEE80E0118F92C555CC27DC28, xmp.iid:6133FC5CEE80E0118F92C555CC27DC28, xmp.iid:6233FC5CEE80E0118F92C555CC27DC28, xmp.iid:6533FC5CEE80E0118F92C555CC27DC28, xmp.iid:7714B863F581E011A773E28348DECBC0, xmp.iid:1B2A1C110D93E011AE72AAF81CDE2A14, xmp.iid:1C2A1C110D93E011AE72AAF81CDE2A14, xmp.iid:AF8054C35595E0118987A373C41BFAEF, xmp.iid:B08054C35595E0118987A373C41BFAEF, xmp.iid:2F85E61174A3E0119CC593702C28B578, xmp.iid:3085E61174A3E0119CC593702C28B578
History When                    : 2011:05:18 10:30:07+09:00, 2011:05:18 10:30:07+09:00, 2011:05:18 10:52:06+09:00, 2011:05:18 10:53:41+09:00, 2011:05:18 14:30:13+09:00, 2011:05:19 17:52:56+09:00, 2011:06:10 15:36:42+09:00, 2011:06:10 15:36:42+09:00, 2011:06:13 09:40:40+09:00, 2011:06:13 11:42:25+09:00, 2011:07:01 08:52:53+09:00, 2011:07:01 08:55:54+09:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /metadata, /, /, /, /, /, /metadata, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 300.00
Manifest Placed Y Resolution    : 72.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches
Manifest Reference Instance ID  : uuid:3C56D3258F82E011AAECF5F31F12E166, uuid:555E43B00F81E0118EB6A5FDAC682736
Manifest Reference Document ID  : uuid:3B56D3258F82E011AAECF5F31F12E166, uuid:545E43B00F81E0118EB6A5FDAC682736
Doc Change Count                : 296
Format                          : application/pdf
Tagged PDF                      : Yes
Creator                         : Adobe InDesign CS4 (6.0.6)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: WF5LK-P31

Navigation menu