User manual
MODEL : LK-P41B 02%,/(35,17(5 All specifications are subject to change without notice 1. Unpacking Table of Contents Standard 1. Product overview 2. Unpacking 3. Usage and Installation 3-1. Control panel usage 3-2. Battery Installation 3-3. Battery charging 3-4. Battery charger usage 3-5. Roll paper installation 3-6. Leather case usage 10 3-7. Self test 11 4. Peripherals connection 13 4-1. Bluetooth connectiontion 13 4-2. Interface cable connection 14 5. Printer specification 15 5-1. Specification 15 6. CPCL Command Compatibility 17 7. Setting up the software 20 Printer Charger CD USB Cable Shielded Roll paper Serial Cable Quick Manual Option Battery Holder (Cradle) Battery Leather case Shoulder strip 2. Product overview 3. Usage and Installation 3-1 Control panel usage Open Button Paper feed button Power switch USB SERIAL Battery DC Power Button Name function Power button This button is used to turn the printer on and off. When the printer is off, press this button for approximately 3 seconds and it will turn on the power. When you press this button in a state that the printer is on, the printer will turn off. Paper Feed Button Paper output can be done manually by pressing this button. Additionally, self-testing and Hexadecimal Dumping can be processed.. 1. Refer to “3-10” for self test information. 2. Refer to the service manual regarding Hexadecimal Dumping. Battery Status Lamp 1. If the Batt, LED are Lit, the battery is fully charged. 2. If you can hear beeping sound and LED light is turned off, it means that the battery is at the lowest level. 3. If the battery is not charged at all, the printer turns off automatically. Error Lamp If the red light is turned on, it means there is no paper roll or the paper cover is open. 3-2 Battery Installation 3-3 Battery charging Hook 1. Be sure that the printer is turned off 2. After open the DC JACK cover, insert DC JACK into the printer. 3. Plug the power code to electrical outlet. 1. Align battery hook as shown in the picture 2. Push the battery into the printer until it locks in place. NOTE As the battery is not charged at the time of your purchase, charge the battery prior to using the printer (Battery charger or Cradle can be used to charge) ⷍCAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions NOTE 1. Unless the exclusive charger is used provided by the manufacturer, the printer can be damaged, and the manufacturer is not liable for the consequential damage. 2. Before removing the battery, make sure that power is turned off. 3. Printer does not work in the status of being connected with charger only. 4. The battery should be installed to operate printer. 5. While charging, do not turn on the power. 6. Do not operate the print while charging the battery. 7. Do not connect the charger while the printer is operated. 3-5 Roll Paper installation 3-4 Battery charger usage Optional DC Jack lamp 1. Insert the battery into the battery holder as shown above 2. Connect the DC JACK to the power electrical outlet. 3. Plug the power code into the electrical outlet. 4. Once the charging is completed, remove the battery from the holder. Press the PUSH button to open the paper cover Insert the paper in the right direction 1 2 3 4 3-5-1 The status of lamp in charging Status charging charging complete Charging Lamp Red Green NOTE In the case the battery is not fixed properly in the holder, the red lamp will be blinking, Then, extract and reinsert the battery. Pull a short length of paper out of the printer and close the cover. Tear off the additional paper using tear bar. 3-6 Leather case usage 3-7 Self Test Optional Open the leather case Place the printer into the leather case 1 2 Turn off the power pressing the power button for approximately 3 seconds. While you are pressing the FEED button, press the power button 1 2 NOTE 1. To print ASCII pattern additionally, press the Feed button once more 2. After printing ASCII pattern, the self test will be finished automatically. 3. If the Feed button is not pressed to print ASCII pattern, self test will be finished automatically after 30 seconds. Close the Velcro and stick the cover. 10 The printout is produced. 11 4. Peripherals connectionThis printer can communicate with Peripherals device via Bluetooth and cables. 4-1 Bluetooth Connection 1. Printer can be connected to the PDA and PC which can do wireless communication. 2. By using Bluetooth function supported in PC, printer can be connected. When the printer is installed initially or when you face a problem, you can run the self test and check the information about -Control Circuit, Mechanism, Print Quality, ROM Version After checking with self-test and no issues are found, you can examine other devices and software. This function is working independent of devices and software. مMotor protection from being overheated The motor should be stopped and cooled about more than 30 seconds after continuous printing 1.5 meter 12 13 5. Pritner Specification 4-2 Interface Cable Connection 5-1 Specification Printing Method Direct Thermal Printing Speed 80mm/sec Resolution 203 DPI X 203 DPI Character CPCL 7 Different Font Size (12~48pt) ESC/POS Font A (12X24), Font B (9X17) Character per line Font A : 48pt, Font B : 64pt Character set ALPHA NUMERIC Character, Extension Character Barcode EAN-8, EAN-13, Code39, ITF, UPC-A, UPC-E, Codabar, Code93, Code128, PDF417(2D), MAXICode (2D) Emulation ESC/POS, CPCL, Commanl Compatible Driver Window CE 4.2&5.0, Window Mobile 5.0 Sensor Paper End Sensor , Gap Sensor , Cover Open Sensor , Black Mark Sensor Serial USB 1. Connect USB or Serial cable into the cable connector on the printer. Paper paper type Thermal Paper / Label NOTE width 25.4mm ~112mm Use the cable offered by the manufacturer (USB, Serial) thickness 0.06mm ~ 0.09mm External Diameter Max. ⱒ56mm Internal Diameter 12.5mm +/-0.5mm TPH 50km Battery Continuous printing operation: 1hr and 30min Standby: 24hrs Printing length: 162m 2. Connect the interface cable into the USB or Serial port of the device (PDA, PC, etc.) Reliability Communications Battery Charger 14 Serial(RS-232C), USB, Bluetooth Class2 input AC100~240V, 50/60 Hz 15 6. CPCL Command Compatibility /05& Battery Charger Size Battery type Li-ion output 7.4V, 2200mAh Charging time 3 hour 40 minute W X D X H(mm) 149 X 161 X 69 W X D X H” 5.8 X 6.3 X 2.7 Weight Temperature Humidity 16 0.53kg (With Battery) operation -10 ~ 50Ⳅ storage -20 ~ 60Ⳅ operation 35 ~ 95% Compatible with only Partially Compatible commanders provided Compatible by the manufacturer. ⷃ ⷅ Not Compatible ⶹ Printer Commands Compatibility PRINT ⷃ FORM ⷃ JOURNAL ⷃ UNITS ⷃ Comments ⷃ TEXT Compatibility TEXT ⷃ FONT-GROUP(FG) ⷃ TEXT CONCATENATION ⷃ MULTILINE(ML) ⷃ COUNT ⷃ SETMAG ⷃ SCALABLE TEXT 9 Linear Bar Codes Compatibility BARCODE ⷃ BARCODE-TEXT ⷃ Two-Dimensional Bar Codes Compatibility PDF417 (PORTABLE DATA FILE) ⷃ MAXICODE ⷃ QRCODE ⷅ DATAMATRIX ⷅ GS1(RSS) ⷅ 17 18 Graphics Compatibility BOX ⷃ LINE ⷃ INVERSE-LINE ⷃ PATTERN ⷃ GRAPHICS ⷃ PCX ⷃ Advanced Commands Compatibility CONTRAST ⷃ TONE ⷃ JUSTIFICATION ⷃ PAGE-WIDTH ⷃ PACE ⷃ NO-PACE ⷃ WAIT ⷃ REWIND 9 TENSION 9 SPEED ⷃ SETSP ⷃ ON-OUT-OF-PAPER 9 ON-FEED ⷃ PREFEED ⷃ POSTFEED ⷃ PRESENT-AT 9 COUNTRY/CODE PAGE ⷃ FORMAT FILES ⷃ BEEP ⷃ CUT 9 PATIAL-CUT 9 MCR ⷅ Line Print Mode Compatibility SETLP ⷃ SETLF ⷃ Moving With X and Y Coordinates ⷃ LMARGIN ⷃ SETBOLD ⷃ SETSP ⷃ Special ASCII Characters ⷃ SETFF ⷃ SET-TOF ⷃ SETLP-TIMEOUT ⷃ 19 7. Setting up the software Please refer to the programming manual included in CD. ǁCertification FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions: (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. Note This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instuctions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. 20 21 SEWOO TECH CO.,LTD. ADDRESS Doosung Bd, 689-20, Kumjung-dong, Kunpo-si, Kyunggi-do, Korea TEL 82-31-459-8200 FAX 82-31-459-8880 URL http://www.miniprinter.com Rev. 1.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2009:08:17 14:08:41+09:00 Modify Date : 2009:08:26 18:22:25-07:00 Producer : Acrobat Distiller 7.0.5 (Windows) Creation Date : 2009:08:17 14:08:41+09:00 Mod Date : 2009:08:26 18:22:25-07:00 Metadata Date : 2009:08:26 18:22:25-07:00 Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 5408 bytes, use -b option to extract) Document ID : uuid:55E41FFBEB8ADE11BB83DBE481F96DA1 Instance ID : uuid:b02735f4-6390-4e36-9b30-322226547de5 Derived From Instance ID : uuid:9817c0d6-a4f5-473c-b795-6875f864be65 Derived From Document ID : adobe:docid:indd:9af84bb3-2282-11de-b934-a651ad89df04 Derived From Rendition Class : proof:pdf Format : application/postscript Title : untitled Page Count : 13EXIF Metadata provided by EXIF.tools