Art Finex AMI2450-AT09H RFID reader writer User Manual 05

Download:
Mirror Download [FCC.gov]
Document ID	3616595
Application ID	8pe3/Dm8WGXUY0HaS9kZrQ==
Document Description	05 User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.24kB (590516 bits)
Date Submitted	2017-10-25 00:00:00
Date Available	2017-10-25 00:00:00
Creation Date	2017-10-25 15:11:22
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2017-10-25 15:11:22
Document Title	05 User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	PC-XP-SP3

RFID reader writer
AMI2450-AT09/H
Users Manual
Ver1.00
ART Finex Co.,Ltd.
■
About Attention receive matters
For regulations and standards
This product has built-in inductive read / write communication equipment.
Ask of the time of your use
The quality level of this product is limited to general applications (computer , OA
equipment , FA equipment , communication equipment , measuring equipment , AV
equipment, etc.) are limited to:
Applications related to human life ( or example , medical equipment , space equipment ,
aircraft , what is required of the submarine relay equipment such as extremely high
reliability ) Please avoid use in:
If it is used in the specification in situations or environments not specifically noted or ,
transport equipment ( train , car , ship , etc.) , such as control of , when you intend to use
to those involved in the safety , rated , to function with your consideration get the safety
measures , such as how to use or fail-safe with a margin for, thank you in advance for
contacting our sales representative
In addition, with regard to quality by the circuit diagram described in this book , so you
do not have to guarantee , please understand .
Ask of the time of your use
Provisions for product warranty of this product are as follows.
① The warranty period is one year from the product shipment
In addition, please forgive me for the responsibility of incidental damages resulting from
the failure or malfunction of the body .
②If you fail in normal use state during the warranty period , please contact a sales
representative so you do the repair and replacement free of charge .
③Even within the warranty period , the following cases will demanda fee for repair or
replacement.
１)Usage error, failure received from the other product
２)Move after the purchase , transport , fall , failure and damage due to contamination
of the liquid / foreign body
3)Fire / earthquake / wind and flood damage / lightning / other natural disasters ,
pollution , smoke damage , failure or damage due to abnormal voltage
④Even within the warranty period, in the following cases repair and replacement will be
refused.
１)Failure and damage caused by improper repair / disassembly / remodeling
⑤holding period of repair performance parts
In our company, after the end of production of the repair for the performance part of this
product, we held three years as a general rule.
However, if you are unable to receive parts when they are difficult to obtain, please
forgive us.
※The performance parts are parts necessary to maintain the functionality of the
product
⑥Regardless of the presence or absence of the guarantee period , please return the
product through the sales representative if you ask for repair. Repair exchange on-site
The specifications of the product
This product is for improvement , please understand that there is a possibility of change
of without notice specifications .
Page 2 of 6
ART Finex Co., Ltd.
Copyright
Software of this product , including the Convention on the copyright laws and , if the law
on other intellectual property rights
①This product software reverse engineering , you will not be able to decompile or
disassemble , .
② It is not possible to modify the whole or any part of the product of the software .
Precautions for Safe Use
This product has been designed with safety in full consideration .
However, all electrical products , and in the wrong hands , there is the danger that it that the injury
occurs due to fire or electric shock . In order to prevent accidents
Please be sure to observe the following things .
(If the following items are ignored, and there is incorrect handling,
there may be imminent risk of death or injury）
flammable , explosive , please do not use in the environment of corrosive gas .
this product , disassemble , do not repair and remodeling .
Do not insert a finger or object in such a hole or gap .
Do not use anything other than the predetermined power and voltage .
Danger
●
●
●
●
（ If the following items are ignored, and there is incorrect
handling, there may be imminent risk of death or injury）
● When making the connection of the power supply to this product, Make sure
that the power supply device is off.
● Do not touch the board of this product in the state in which the power is turned
on.
● Do not disassemble or connect desorption of the product in the state in which
the power is turned on.
● Do not stare at the light-emitting part of this product at close range .
● Do not damage the power cord connection code , break or process or , forcibly
bend, pull , twist , or bundled , or place heavy objects , do not pinch .
● Do not place tatami , carpet ,or items such as a table cloth on top of the ones
sensitive to heat .
●
This product has a built-in communication device using radio waves .
Depending on the application and place to be used for that purpose , it may affect
medical equipment . In order to reduce this effect , we should take measures that
do not close within 22cm from the mounting site of implantable shaped medical
equipment this product .
●This product is communication equipment using the radio wave of 13.56MHz
which is generally available in ISM band . Depending on the use and location where
you want to use this , interference might occur. In order to minimize the effects of
this interference, please pre- confirm upon introduction. In addition , there is also
a fear that the radio astronomy and medical equipment , etc. , may be affected, so
you should be especially careful about the use in such cases.
●When you connect this product , make sure that the polarity of the power supply
connection terminal to the product is properly connected . If you connect the power
supply to the wrong terminal , there is a risk of causing a failure of the circuit ,
burnout and firing .
warning
Page 3 of 6
ART Finex Co., Ltd.
（ If the following matters are ignored, and there is
incorrect handling , it may cause a malfunction）
●Do not store or use at the location ( environment ) , such as the following .
●outdoors or in direct sunlight
●locations subject to vibration and shock
●moisture and dust in many places
●violent place or places where condensation occurs of location or temperature,
and there is a humidity difference between high-temperature and high- humidity
●close to the ones generated by the heat ( stove , heater , etc.)
●strong magnetic radio waves near the generation to those of ( magnet , display ,
speaker , radio , radio , etc.)
●wet locations
●strong place of the influence of static electricity
●When you connect this product , make sure that the polarity of the power supply
connection terminal to the product is properly connected .
●connector and screws attached to this product should be securely tightened.
prohibition
Regulations and Standards
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Properly shielded and grounded cables and connectors must be used for connection to host
computers and / or peripherals in order to meet FCC emission limits.
Please use the enclosed USB cable with core. (Items listed below)
※USB cable：
Manufacture name : ELECOM Item name:USC-MF20BK (Or equivalent)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
FCC ID：2AM8PAMI2450-AT09H
Page 4 of 6
ART Finex Co., Ltd.
1. Overview
This document describes the hardware specifications and the function outline of the RFID
reader / writer "AMI2450-AT09/H".
AMI2450-AT09/H is an RFID reader / writer with a USB interface.
Since it is possible to operate the RFID reader / writer by autonomous control with the
microcomputer function, control by dedicated command is unnecessary, so you can
cooperate with the host device readily.
The installed RFID reader / writer is compatible with IC tags with I-CODE-SLI, I-CODE-SLIX
chips conforming to ISO 15693, and scanning conditions can be set and registered in
advance.
Keyboard emulation operation can be performed by software attached to this product,
application software for data input on PC is unnecessary.
1-1．Feature
(1) Hardware
① It implements the USB interface.
② It incorporates a reader / writer compatible with ISO 15693, and it supports IC tags
equipped with ISO 15693 compliant I-CODE-SLI and I-CODE-SLIX chips.
(2) Installed software
① Automatically read IC tag by autonomous control.
② Memory area for IC tag detection can be set / registered arbitrarily by dedicated tool.
③ The read information is automatically transmitted to the host device via USB.
④ Prefix data such as PLC commands can be inserted into the data to be output.
⑤ IC tag can be written by special tool.
(3) Attached software
The following Windows PC software is available.
① Setting tool that arbitrarily sets IC tag reading / output conditions.
②Keyboard emulation software that processes data received from AMI2450-AT09/H as
keyboard input data.
Page 5 of 6
ART Finex Co., Ltd.
2.Hardware Specifications
2-1．Body specification
№
10
11
12
13
Item
Name of product
Communication
system
Carrier frequency
Radio Law division
Host interface
Power supply
Consumption current
Operation temperature
Storage temperature
Storage and operating
humidity
Housing size
(D × W × H)
Weight
Dustproof and
splashproof
specification
Specification
AMI2450-AT09/H
ISO/IEC 15693、Felica(ISO/IEC18092)
13.56MHz±50ppm
Inductive read / write communication equipment that has
received the type designation
Mini USB(USB2.0)
5 Vdc (USB Bus power)
200mA or less
0℃ ~ 50℃
-20℃ ~ 70℃
30%RI ~ 90%RH(No condensation)
135mm × 76mm × 27mm
(Fixed M4 tap for 4 places)
About 150 g or less
No conformity standard
2-2．Body Photo
Mini USB port
Power LED
(Front view)
Label seal
Display LED
(2pcs)
(TOP view)
(Bottom view)
Page 6 of 6
ART Finex Co., Ltd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
Language                        : ja-JP
Tagged PDF                      : Yes
Title                           : 
Author                          : PC-XP-SP3
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2017:10:25 15:11:22+09:00
Modify Date                     : 2017:10:25 15:11:22+09:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools