Arts Digital Technology KS780BT Bluetooth Professional Karaoke System User Manual KS780 BT IM English EU Version 20160912 Preview
Arts Digital Technology (HK) Limited Bluetooth Professional Karaoke System KS780 BT IM English EU Version 20160912 Preview
User Manual rev.1.pdf
INSTRUCTION MANUAL
Thank you for purchasing this Karaoke System. Please read this instruction manual carefully before
using this product to ensure proper use. Keep this manual in a safe place for future reference.
KS780-BT
Bluetooth Professional Karaoke System
BEFORE WE BEGIN
WHAT’S IN THE BOX
IMPORTANT SAFETY INSTRUCTION
EN - 1
ATTENTION
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
This compact disc player is classified as a CLASS 1 LASER PRODUCT.
The CLASS 1 LASER PRODUCT label is located inside the CD compartment.
CLASS 1
LASER PRODUCT
The CAUTION marking is located at the bottom of the unit.
Below markings are located inside CD compartment.
DANGEROUS VOLTAGE
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated dangerous voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
DANGER:
Invisible and hazardous laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
LASER SAFETY: This unit employs a laser.
Only qualified service personnel should
attempt to service this device due to possible
eye injury.
CAUTION: USE OF CONTROLS,
ADJUSTMENTS OR PERFORMANCE,
PROCEDURE HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
KARAOKE MACHINE TABLET
CRADLE PRE-RECORDED
KARAOKE CD+G DISC AV CABLE
AC POWER
ADAPTOR DYNAMIC MICROPHONE INSTRUCTION
MANUAL
Thank you for purchasing the KS780-BT Karaoke Machine. This is your assurance of quality,
performance and value. This product was manufactured using the highest quality components
and standards of workmanship. Our engineers have included many useful and convenient
features in this product. Please be sure to read this instruction manual completely to make sure
you are getting the maximum benefit from each feature.
• This unit is designed to operate on an AC 100-240V~50/60Hz supply only. Connecting it to other power sources
may damage it. Ensure that the supply corresponds to the information on the rating label on the bottom of the unit.
• Under the environment with electrostatic discharge the sample may malfunction and need user reset to recover
sometimes.
EN - 2
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference recieved,
including interference that may cause
undesired operation.
compliance could void the user’s authority to
operate the equipment.
To comply with FCC’s RF radiation exposure limits
for general population/uncontrolled exposure, this
device must be installed to provide a separation
distance of at least 20cm from all persons.
FCC RADIATION EXPOSURE
STATEMENT
FCC ID : OWT-KS780BT
This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC AND CANADIAN ICES
This device must not be collocated or
operating in conjunction with any other
antenna or transmitter.
IMPORTANT SAFETY INSTRUCTION
POWER CONNECTION & OPERATION
EN - 3
1. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
2. The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, tablecloth, curtains, etc.
3. No naked flame sources, such as lighted candles, should be placed on the apparatus.
4. It shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
5. Do not place the product in closed bookcases or racks without proper ventilation.
6. Where the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
1. The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
2. The AC/DC adaptor and apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the AC/DC adaptor and
apparatus.
3. The AC/DC adaptor is used as disconnect device.
The AC/DC adaptor of apparatus should not be obstructed OR should be easily accessed
during intended used. To be completely disconnect the power input, the AC/DC adaptor of
apparatus shall be disconnected from the mains.
4. An appliance with a protective earth terminal should be connected to a mains outlet with
a protective earth connection.
Plug the supplied power adaptor small end into DC jack located on the rear panel, plug the
adaptor into the standard AC wall socket.
CAUTION: The unit is designed to operate from
a mains supply of AC 100-240V~50/60Hz.
If the adaptor does not fit properly,
turn it over and try again. Do not force it.
NOTES: When the unit is not operated by the
AC power or unused for long periods of time.
Please remove the power adaptor from the
wall outlet and unplug from the main unit.
Over time your hearing will adapt to continuous loud sounds and will give the impression that
the volume has in fact been reduced. What seems normal to you may in fact be harmful. To
guard against this before your hearing adapts, set the volume to a low level.
Slowly increase the level until you can hear comfortably and clearly and without distortion.
Damage to your hearing is accumulative and is irreversible. Any ringing or discomfort in the
ears indicates that the volume is too loud. Once you have established a comfortable listening
level, do not increase the sound level.
Turn the VOLUME Control knob to increase / decrease the volume.
ESTABLISH A SAFE SOUND LEVEL
ADJUSTING THE VOLUME
CONNECTING AC POWER
SAFETY CONSIDERATIONS
WARNINGS
EN - 4
CONTROL LOCATION
TOP VIEW
FRONT VIEW
BACK VIEW
CD DOOR
ON/ OFF
BUTTON
POWER
INDICATOR
MIC VOLUME
TFT SCREEN
MASTER
VOLUME
DISCO LIGHT
VIDEO
JACK
FUNCTION
BUTTON
SCREEN ON / OFF
BUTTON PROGRAM / REPEAT
BUTTON
SKIP FORWARD /
BACKWARD
BUTTON
CRADLE
PLAY / PAUSE /
PAIR BUTTON
RECORD BUTTON
ECHO CONTROL
LINE IN JACK
STOP / LIGHT ON /
OFF BUTTON
KEY / PAGE +/-
BUTTON
BALANCE CONTROL
AVC CONTROL
SPEAKERS
AUDIO OUT
(R) JACK
AUDIO OUT
(L) JACK
USB SOCKET
MIC 2
MIC 1
DC JACK
EN - 5
TFT DISPLAY ICON
CDG TRK 10/10 PROG 00:16:04
PLAYING TIME
REPEAT MODE
PROGRAM MODE
PLAY / PAUSE / STOP INDICATOR
PLAYING MODE
PAUSE MODE
STOP MODE
PLAYING TRACK NUMBER AND TOTAL TRACK NUMBER
CDG=CD+G DISC PLAYING
PLAYING CD/ CDR/ USB
Snap the tablet cradle via two mounting holes
at the back of the unit till the cradle is locked
in place on both ends securely.
Put yout tablet in landscape position (Do not
encourage to put in portrait position)
TABLET OPERATION
Tablet cradle
MAKING THE CONNECTIONS
CONNECTING TO YOUR TV OR VCR / HOME THEATER
Your Karaoke machine is designed to connect to your TV the same way you would connect
most video cameras, VCR / Home theater or video games consoles. We have provided
RCA cables to connect your unit to a TV, VCR / Home theater, video device or an external
audio / sound system. The RCA cables have three connections at each end (white and red
are for left and right audio connections and the yellow is for video connections).
VIDEO CONNECTION
Please follow the steps below to display CD+G lyrics on the TV screen:
1. Locate the multi-colored RCA cables
2. Connect video cable (yellow) to the Video Out of the back of the Karaoke Machine
3. Connect the other end of the video cable (yellow) to the video input on your TV or VCR /
Home theater.
SELECTING YOUR KARAOKE MACHINE AS YOUR SOURCE/INPUT
Selecting your Karaoke Machine as a source / input on your TV is very similar to connecting
a VCR/DVD or Satellite system.
We’ve listed below the most common ways of selecting the source from your TV or VCR /
Home Theater:
1. In the set up menu of the TV or VCR / Home theater there may be an option for “Input
Select” where you can choose between “Cable/Ant., Video 1, Video 2, etc” as the input
source.
2. Look for a TV channel between the highest and lowest on your TV or VCR / Home
theater (i.e AUX, EXT, LINE 1 or LINE IN)
3. Your remote control for your TV or VCR / Home Theater may have source input
selections as well as detailed below: “Video, Video 1, Game, AUX, EXT or LINE-IN.”
Choosing one of those sources in most cases should display the lyrics from your
Karaoke Machine as well.
EN - 6
MAKING THE CONNECTIONS
AUDIO CONNECTION
Please follow the steps below to connect audio signal from the unit to your TV, VCR/Home
Theater or home audio system.
RCA connection
1. Locate the multi-colored RCA cables (White and Red)
2. Connect audio cables to the Audio Out of the back of your Karaoke Machine.
3. Connect the other end of the audio cables to the Audio/Auxiliary input on your TV or
VCR/Home Theater or home audio system.
EN - 7
SETTING UP LINE IN CONNECTION
The Line-in mode allows you to connect external music player or external sound source to
your Karaoke Machine speakers
1. Plug a 3.5mm audio cable (not included) into your external music player and connect the
other end (3.5mm jack) into the LINE IN jack on the front of your Karaoke Machine.
2. Make sure your external music is turned on.
3. Start music playback on your external music player.
4. Adjust MASTER VOLUME to control the sound level of music playback from the speakers
on the Karaoke machine.
NOTE:
If the unit is in CDG / USB / Bluetooth
mode, when you connect an external
audio device to the LINE IN jack by an
LINE-IN cable, this unit will automatically
be switched to LINE IN mode. If you
remove the LINE-IN cable from the LINE
IN jack, the unit will resume to the previous
mode.
MAKING THE CONNECTIONS
EN - 8
SETTING UP YOUR MICROPHONE
1. Plug a microphone into the MIC1
or MIC2 jack at the rear of your
Karaoke Machine. Their output is
mixed with playback from
CD/CD+G.
2. Located on the microphone,
there is an ON/OFF switch.
3. Ensure you set the ON/OFF
switch on the microphone to ON
when required for use.
Warning:
Please do not point the microphone head directly to the front of the speaker(s) on the unit
when you are singing, it would cause unwanted feedback sound that may affect the
performance of your unit.
Tapping or dropping the microphone while it is on can permanently damage your
microphone. Resist the urge to swing the microphone around by the cord!
VHF wireless microphones are not recommended to work with this Karaoke system. Some
VHF wireless microphones may cause unwanted noise and interference.
CD OR CD+G / MP3+G OPERATION
This unit is designed to play CDs/CD+G/MP3/MP3+G
disc bearing the identification logo respectively. If the
disc does not conform to the standard, it may not play
properly.
NOTE: The unit may not be able to read CDR or CDRW disc correctly. The readability
depends on the quality of recording produced by CD recorder or CD writer.
LOADING A DISC
1.
2. Gently close the CD Door to the CD compartment. The Karaoke
Machine begins to read the disc and “READ” will be displayed.
After that, the operation icon will appear on the top of the TFT
screen.
3. Press PLAY/PAUSE to play the disc. (If no disc is loaded, it will
display “NO DISC”)
STOP
If the STOP button is pressed in the course of playing, the disc will cease to play.
SKIP PLAY (For both CD and CD+G/MP3+G discs)
In stop or playback mode, you can skip up or down to a specific track by
pressing the forward or back SKIP Button.
PLAY/PAUSE
1. To start playing, press the PLAY/PAUSE button once, the currently track number and
PLAY indicator will appear on the screen.
2. To temporarily stop playing, press the PLAY/PAUSE button, the PAUSE indicator will be
shown on the screen.
3. To resume play, press the PLAY/PAUSE button again, the PLAY indicator will be shown on
the screen.
NOTE: - Pressing pause when a CD+G/MP3+G is playing may cause distorted lyrics
on the screen, any distortion will remain until the whole screen is
refreshed during an instrumental break or you stop the song and start it
from the beginning
- Never place anything except a compact disc on the disc compartment.
Foreign objects can damage the unit.
- Do not apply excessive force to disc cover.
- Only place one disc on the disc compartment at a time.
- Do not open the disc cover of the CD compartment while it’s playing.
EN - 9
TURNING POWER ON/OFF
1. To turn on the Karaoke Machine, press the POWER button
once, the POWER indicator will light up to full brightness and TFT
2. To turn off the system, press the POWER button again. The
power indicator and TFT screen will turn off.
screen will display the OPENING SCREEN and start to read CD.
(If no disc is loaded, it will display “NO DISC”)
Open the CD door, place a disc in the CD compartment with the
printed side facing down.
CD OR CD+G / MP3+G OPERATION
SEARCH (For CD disc /MP3 disc only)
When playing a CD disc or MP3 disc, you can press and hold the SKIP
buttons ( or ) to locate a specific point on a track. The system will
search at high speed in the forward or reverse direction. By releasing the
button, normal play will be resumed.
REPEAT PLAY (For both CD and CD+G/MP3+G discs)
1. During playback, press PROGRAM/REPEAT button once, the REP ONE
indicator will appear on the TFT screen, it can keep repeat the current track.
2. To repeat the Directory/Folder, press PROGRAM/REPEAT button twice, the
REP FOLDER indicator will appear on the TFT screen.
3. To repeat all tracks in disc, press PROGRAM/REPEAT button again,
the REP ALL indicator will appear on the TFT screen.
4. To clear the REPEAT function, press PROGRAM/REPEAT button again,
the NO REP indicator will appear on the TFT screen.
PROGRAMMING CD PLAYBACK
This unit can be programmed to play up to 20 tracks/files in CD mode. Load the
music CD/CD+G or MP3/MP3+G disc onto the CD compartment (without pressing
the PLAY/PAUSE button).
1) Press PROGRAM/REPEAT button once in stop mode. “PRG SET 01:XX” will be
shown on the screen.
2) Press the SKIP buttons to select the desired track to be programmed.
3) Press PROGRAM/REPEAT button again to save the selected track/files.
4) Repeat steps 2–3 to program up to 20 tracks/files.
5) Press the PLAY/PAUSE button to play the programmed tracks after
is completed. The “PROG” indicator will appear on screen during the
programmed playback.
6) To clear program and resume normal playback, press the STOP button twice
during playback, or open the CD door to clear the programmed tracks.
REMARK:
The unit can store up to 20 tracks/files in the programmable memories. During the
programmed playback, user can still select the “repeat one/repeat all” function.
PAGE+ / PAGE-
During the STOP mode, press PAGE+/PAGE- to advance song selection by 10
tracks or to go to the next page of song list.
KEY+ / KEY-
Your system includes a digital key controller to adjust the audio tone (pitch) of the
music. Key control should be done in the PLAY MODE only.
Press the KEY+ button to raise the key of the music, and press the KEY- button
to lower the key. (max. 6 times)
programming
EN - 10
CD OR CD+G / MP3+G OPERATION
ECHO
Adjust the ECHO control to enhance your voice for a concert hall effect.
BALANCE
Adjust the BALANCE control between the pre-recorded singer’s voice and the
music when using a multiplex karaoke disc.
AUTO VOICE CONTROL
AUTO VOICE CONTROL can be activated and adjusted by the AVC control knob.
The vocals on the Multiplex recording will be muted when the singer starts to sing
through the microphone. When the singer stops singing, the vocals will resume to
normal.
MASTER VOLUME
Rotate to the MASTER VOLUME control to obtain the desired sound level.
MIC VOLUME
Adjust the MIC VOLUME control to a desired level and obtain the best
performance.
SCREEN ON/OFF
Press the SCREEN ON/OFF button to turn the TFT screen ON/OFF.
SELECTING THE AUDIO SOURCE
Press FUNCTION button to toggle between CD, USB, Bluetooth modes.
Note: Selecting the audio source should be done in the stop mode only.
RECORDING AUDIO
You can record CD+G video and audio together with the singer’s voice to a USB
flash drive. The recording will be in MP3 format. The stored file name after recording
will be “TRKXX.MP3”.
• Plug a USB flash drive to USB socket.
• Start the desired track to play on CD/CD+G disc by pressing the
SKIP or
SKIP
button.
• Press RECORD button to record the CD/CD+G playback together with your voice.
(The percentage of completion will be
displayed.)
• Press RECORD button again to stop recording.
• To playback the recording, it is the same as
playing back the MP3 or MP3+G
USB flash drive, please follow instructions in
USB OPERATION.
NOTE: This Karaoke system can only record tracks on CD / CD+G disc.
EN - 11
file on the
LIGHT EFFECT
Press LIGHT ON/OFF button once to switch on LED light effect. Press the button again to
switch off.
PAGE+ / PAGE-
During the STOP mode, press PAGE+/PAGE- to advance song selection by 10
tracks or to go to the next page of song list.
EN - 12
REPEAT PLAY
1. During playback, press PROGRAM/REPEAT button once,the REP ONE indicator
will appear on the TFT screen, it can keep repeat the current track.
2. To repeat the Directory/Folder, press PROGRAM/REPEAT button twice,
the REP FOLDER indicator will appear on the TFT screen.
3. To repeat all tracks in disc, press PROGRAM/REPEAT button again,
the REP ALL indicator will appear on the TFT screen.
4. To clear the REPEAT function, press PROGRAM/REPEAT button again,
the NO REP indicator will appear on the TFT screen.
USB OPERATION
INSERTING USB FLASH DRIVE
1. Insert a USB flash driver into the USB socket on the back of your karaoke system.
2. Make sure that USB is selected as the audio source.
See "SELECTING THE AUDIO SOURCE”
3. Press PLAY/PAUSE to start playback.
PLAY/PAUSE
1. To start playing, press the PLAY/PAUSE button once, the currently track number and
PLAY indicator will appear on the screen. (“USB” will be shown on the screen).
2. To temporarily stop playing, press the PLAY/PAUSE button, the PAUSE indicator will be
shown on the screen.
3. To resume play, press the PLAY/PAUSE button again, the PLAY indicator will be shown
on the screen.
STOP
If the STOP button is pressed in the course of playing, the MP3+G playback will cease to play.
SKIP PLAY
In stop or playback mode, you can skip up or down to a specific track by pressing the
forward or back SKIP Button.
NOTE: - Pressing pause when playing on the MP3+G, it may cause distorted lyrics on
the screen, any distortion will remain until the whole screen is refreshed during an
instrumental break or you stop the song and start it from the beginning
SEARCH (For MP3 file only)
When playing a MP3 file on the USB, you can press and hold the SKIP buttons
( SKIP ) to locate a specific point on a track. The system will search at high speed in
the forward or reverse direction. By releasing the button, normal play will be resumed.
USB OPERATION
PROGRAMMING USB PLAYBACK
This unit can be programmed to play up to 20 tracks/files in USB mode. Plug the USB flash
drive and select USB mode. (without pressing the PLAY/PAUSE button).
1) Press PROGRAM/REPEAT button once in stop mode. “PRG SET 01:XXX” will be shown
on the screen.
2) Press the SKIP buttons to select the desired track to be programmed.
3) Press PROGRAM/REPEAT button again to save the selected track/files.
4) Repeat steps 2–3 to program up to 20 tracks/file.
5) Press the PLAY/PAUSE button to play the programmed tracks after programming is
completed. The “PROG” indicator will appear on screen during the programmed
6) To clear program and resume normal playback, press the STOP button twice during
playback to clear the programmed tracks.
REMARK:
The unit can store up to 20 tracks/files in the programmable memories. During the
programmed playback, user can still select the “repeat one/repeat all” function.
EN - 13
playback.
2. The Bluetooth indicator will flash quickly.
3. Using the native controls on your Bluetooth Device, select the " KS780BT" in your Bluetooth
setting to pair.
4. When successfully paired, the Bluetooth indicator will stop flashing.
5. To unpair, press & hold the PAIR button. To pair the same device again, press & hold the
PAIR button again.
BLUETOOTH SETUP
1. Follow the instructions for Pairing a Bluetooth Device.
2. Use the native controls on the connected Bluetooth Device to select a track.
3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth
Device or press the button of unit.
4. Audio playback from the connected Bluetooth device can now be heard through the speaker.
PLAYING MUSIC VIA BLUETOOTH
Pairing is the term used when two Bluetooth devices are connected wirelessly.
BLUETOOH OPERATION
1 Press
FUNCTION button to toggle to Bluetooth mode.
PAIR
EN - 14
CARE AND MAINTENANCE
*Carrying for Compact Discs
1. Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come
in contact with the shiny, unprinted side of the disc.
2. Do not attach adhesive tape, stickers, etc. to the disc label.
3. Clean the discs periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive
cleaners to clean the disc. If necessary, use a CD cleaning kit. If a disc skips or gets stuck
on a section of the disc, it is probably dirty or damaged (scratched). When cleaning the disc,
wipe in straight lines from the center of the disc to the outer edge of the disc. Never wipe in
circular motions.
4. This unit is designed to play discs bearing the identification logo as shown here or MP3
format Disc. Other discs may not conform to the CD standard and may not play properly.
5. Discs should be stored in their cases after each use to avoid damage.
6. Do not expose discs to direct sunlight, high humidity, high temperatures, or dust, etc.
Prolonged exposure or extreme temperatures can warp the disc.
7. Do not stick or write anything on either side of the disc. Sharp writing instruments or the
ink may damage the surface.
*Care of the Cabinet
1. To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
2. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture.
Use caution when cleaning and wiping the plastic parts.
3. Mild soap and a damp cloth may be used on the front panel.
*To Clean the Lens
If the lens get dirty, your player may skip or may not play a CD
1. Open the CD door.
2. Use a camera lens blower/brush to blow on the lens once or twice, brush the dust or
particles off the lens then blow again.
3. To remove fingerprints, use a dry cotton swab to wipe from the middle to outer edge of
the lens.
TROUBLE SHOOTING
No power when POWER
is on.
AC adaptor is not plugged
into a wall outlet or the
connector is not plugged
into the power supply jack
on the back of the unit.
Plug the AC adaptor into a
wall outlet and plug the
connector into the supply
jack on the unit.
The AC outlet may not have
power.
Check the outlet with a
working lamp or other
electrical appliance.
TV system is set to
minimum
TV system is powered Off
RCA cords are not
connected securely.
Turn up the volume on
the TV system
Power the TV system on.
Ensure white and red RCA
cords are securely inserted
into into the karaoke system
and the TV system.
CD Player does not work
normally
Disc is inserted upside
down
Disc is dirty
Disc is scratched
Disc is warped
A non standard disc is
inserted
Moisture has formed
inside the CD deck
Karaoke system needs to
be reset
Insert the disc correctly
Wipe clean with a soft cloth
Use a new disc
Use a new disc
Only use discs bearing
correct identification logo
Wait about 20 - 30 mins to
let it dry out.
Disconnect the machine
from the power source for
30 seconds then reconnect
No sound - If audio is going
through TV or VCR.
Source Selection on TV or
VCR is not correct.
RCA cords are not
connected securely
Follow directions “Making
the connections”
Ensure white and red RCA
cords are securely inserted
into both the karaoke
system and the home
stereo system.
PROBLEM POSSIBLE CAUSE SOLUTION
EN - 15
No power when plugged in.
No sound from TV.
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
No song lyrics appear on
the TV screen
Video cable is not
connected properly to the
TV
Source selector on TV is
not set to VIDEO
TV does not have video
line input
A CDG is loaded but the
CD+G icon is not lit
Mic volume control is set to
minimum
Connect the video cable to
the karaoke system’s VIDEO
OUT and to the TV VIDEO
IN.
Using your TV remote to
select VIDEO input or select
the proper VIDEO input on
the TV itself.
Connect from VIDEO OUT
of the system to the VIDEO
IN on your VCR/Home
theater. Refer to “Making
the Connections. Check
the disc to be sure it is a
CD+G
Check the disc to be sure it
is clean.
Mic is off
Adjust mic volume to max,
and then re-adjust to a
comfortable level
No Video is displayed on
the TFT Screen.
No sound from mic
Set Screen button to turn
ON.
Ensure you are playing a
CD+Graphics or CD+G
Karaoke disc.
The TFT Screen is turned
OFF.
The disc being played is a
regular music CD,in which
case no image will be
displayed.
Turn on mic with the
ON/OFF switch located on
the microphone
EN - 16
No sound when playing
audio via Bluetooth.
Your Bluetooth device
hasn’t been paired
properly.
Pairing your Bluetooth
device according to the
“Bluetooth setup” section.
The volume control of your
Bluetooth device is set too
low.
The volume control of your
Bluetooth device is set too
low.
Increase the volume of your
Bluetooth device.
Increase the volume of the
unit by VOLUME control.
SPECIFICATION
Specifications are typical, individual units might vary. They are subject to continuous
improvement without notice and without incurring any obligation.
Audio Section
Output power
Output impedance
CD OR CD+G player
Frequency response
Signal - to - noise ratio
Number of programs
Microphone
3 watt + 3 watt RMS
3 Ohms
100 Hz - 20 kHz
50 dB
20 STEPS RANDOM ACCESS PROGRAMMING
-73 dB 600 OHMS IMPEDANCE WITH
Ø 6.3mm DYNAMIC MICROPHONE
EN - 17
DC voltage
Caution
Please refer for further information to the user manual
RECYCLING
This product bears the selective sorting symbol for
Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant
to European directive 2012/19/EU in order to be
recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent
recycling organization or to the retailer when he buys
an new electrical or electronic equipment.
Polarity of d.c. power connector
THE KARAOKE MACHINE (GLOSSARY OF TERMS)
Following are some brief descriptions of karaoke terms you may need:
Echo:
By adding some minor feedback to your voice the Echo feature adds depth and
resonance to a singer's voice. Echo affects only your voice and not the music. It
will make you sound like you are singing in a big concert hall.
Multiplex:
This karaoke system is capable of playing Multiplex CD+G Karaoke discs.
Multiplex Karaoke discs feature two mono versions of the same recording on left
and right channels. The right channel features a mono version of the song with the
lead vocals pre-recorded. The left channel features the same song, without the
lead vocals recorded.
Auto Voice Control (A.V.C.):
This is short for “Automatic Vocal Control”. When the AVC knob on the front panel
of the player is turned clockwise, the AVC function is activated. AVC is used to
eliminate the singer's vocals from specially made Multiplex CD+G karaoke discs.
Once the AVC is activated, as you sing into the microphone, the pre-recorded
vocals are eliminated and replaced with your singing voice. Set the AVC to a lower
setting, and you'll be able to hear the pre-recorded vocals in low volume as well as
your own singing voice. Set the AVC to maximum and as you sing into the
microphone, the pre-recorded lead vocals will be completely eliminated, and only
your own singing voice will be heard.
NOTE: The AVC controls is only functional with specific Multiplex CD+G Karaoke
Discs. AVC will not eliminate the vocals from standard music CDs, and will not
function when playing standard Karaoke CD+G discs, such as the disc included
with this system.
CD+G:
This is short for Compact Disc plus Graphics. This is a regular audio CD with the
lyrics stored in a data track. While your karaoke player will play regular audio CDs
they will not have the background data track that will allow the lyrics to be
displayed.
EN - 18
END OF LIFE DISPOSAL
Warning! This logo set on the product means that the recycling of this apparatus
comes within the framework of the Directive 2002/96/CE of January 27, 2003
concerning the Waste of Electrical and Electronic Equipment (WEEE).
This symbol means that used electrical and electronic products should not be mixed
with general household wste. There is a separate collection system for these
products.
- The presence of dangerous substances in the electrical and electronic equipments can have
potential consequences on the environment and human health in the cycle of reprocessing this
product.
- Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled
waste. Used electrical and electronic equipment must be treated separately and in accordance
with legislation that requires proper treatment, recovery and recycling of used electrical and
electronic equipment.
- Local authorities and resellers have set special procedures for the purpose of collecting and
recycling this product (please contact your local authority for further details). You have the
obligation to use the selective waste collection systems put in place by your local authority.
- If your used electrical or electronic equipment has batteries or accumulators, please dispose of
these separately beforehand according to local requirements.
- By disposing.of this product correctly you will help ensure that the waste undergoes the
necessary treatment, recovery and recycling and thus prevent potential negative effects on the
environment and human health which could otherwise arise due to inappropriate waste handling.
If you want to dispose of this equipment, please do not use the ordinary dust bin!
This appliance complies with the following EEC directives: 2006 / 95 / EEC /
Low voltage directives / EMC directive
EN - 19