Arts Electronics BOP85579X Bop Wireless Speaker 2.0 User Manual 840042 46 INS Bop Wireless Speaker revised ai

Arts Electronics Co., Ltd Bop Wireless Speaker 2.0 840042 46 INS Bop Wireless Speaker revised ai

UserMan

LOCATION OF PARTS AND CONTROLSLITHIUM-ION BATTERY WARNINGSThis device contains a non-removable lithium-ion battery. The battery must berecycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.FCC INFORMATIONThis equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the distance between the equipment and receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This equipment may not cause harmful interference.2. This equipment must accept any interference received, including interference that may cause undesired operation.Modifications not authorized by the manufacturer may void the user’s authority to operate this device.1. Dust Cover2. Power Switch3. Micro USB Port4. Volume Up Button5. Volume Down Button6. Play/Pause Button7. Mic8. Suction Cup9. LED indicator10. Micro USB Charging Cable (not shown) Bop Wireless Speaker 2.0WIRELESS SPEAKER THAT STICKS Fold Fold Fold Fold FoldMerrimack, New Hampshire, USA 03054 800-846-3000 • Brookstone.com
Fold Fold Fold Fold Foldpair, select “Bop 2.0”. If prompted, use 0000 as a PIN for the pairing code. Once thespeaker is selected, the LEDIndicator will flash slowly andbeeps will sound to confirmpairing complete. 1. Play your audio device as you normally would, 2. Volume may be adjusted on your audio device or by pressing the '+' or '-' buttons. 3. Press and hold the '+' or '-' button will advance to the next track or go back to the previous track. 4. To pause audio, press the '>' button on the Bop Speaker. To resume audio playback press the '>' button again. 5. Slide the Power Switch to OFF. The LED will go out.LISTENING TO YOURAUDIO DEVICE SPECIFICATIONSPower Supply: 5V, 500mATotal Output: 3WRange: Class 2, up to 33 ft (10 m)Li-ion Rechargeable Battery: 400mAhSpeaker: 1.50 inch, 4 OhmCharging Time: Approx. 2.5 hoursBattery Life: Approx. 9.5 hoursCompatibility: Bluetooth® 2.0 or above device with A2DP/AVRCP/HFP/HSPThe Bluetooth® word mark and logosare registered trademarks owned ofBluetooth SIG, Inc. and any use of such marks by Brookstone is under license.CARE AND STORAGE 1. Store the speaker in its compact form in a cool, dry place.BASIC CELLPHONE OPERATION1.2.3.4.5. When you have an incoming call,the speaker sounds an incomingcall tone. Both the speaker and your cellphone may ring, dependingon your cellphone settings. To answer an incoming call, short press Play/Pause Button to answer the call.To reject an incoming call, long press Play/Pause Button to reject the call.To end a call, short press Play/Pause Button once. If, while you are listening to music,your phone rings and you answer the call, the music selection will then continue from where it had stopped.CHARGING THE SPEAKER1. Connect the USB Cable (included) to the Micro USB Port on the speaker.2. With the speaker’s Power Switch off, plug the other end of the USB Cable into a USB Port on your computer.3. The LED Indicator will illuminate red while charging, and the light will go out when the speaker is fully charged. Charges in approximately 2.5 hours for up to 9.5 hours of listening enjoyment.PAIRING YOUR DEVICE1. Prepare your device to pair using Bluetooth®, making sure you are within 33 feet of the speaker. Refer to your device’s owners manual for details if necessary. 2. Slide the Power Switch to ON. The LED Indicator light will flash quickly and the speaker will sound beeps to enter auto-pairing mode. .3 The speaker will wait for a connection in pairing mode for 4 minutes. If it does not pair with a device, it goes into sleep mode. To enter pairing mode again, power the speaker off and then on. 4. Once the speaker is in pairing mode and your device is ready to

Navigation menu