Arts Electronics PU83848X Mobile Mini BT Speaker User Manual 801161 801162 INS0211 PopUp Speaker Rev ai

Arts Electronics Co., Ltd Mobile Mini BT Speaker 801161 801162 INS0211 PopUp Speaker Rev ai

User Manual

801162_INS_Mobile Mini SpeakerInstructions Doc. Size: 250mm W x 115mm H Folded Size: 50mmW x 115mmH Output at 100% Prints 1/1 Black Finishing: Trim to Crops; Accordian Fold: 4 foldsFoldFoldFoldFoldBATTERY PRECAUTIONPlease dispose of this unit in the same manner as you would an exhausted battery. FCC INFORMATIONThis equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna. • Increase the distance between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This equipment may not cause harmful interference.2. This equipment must accept anyinterference received, including interference that may cause undesired operation.Modifications not authorized by themanufacturer may void the user’sauthority to operate this device.FCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Canada Statement:This device complies with RSS-210 ofthe IC Rules; Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause CHARGING THE SPEAKER1. Connect the USB Cable (included) to the micro USB Port on the speaker.2. With the speaker’s On/Off Switch off, plug the other end of the USB Cable into a USB Port on your computer.3. The LED Indicator will illuminate red while charging, and the light will go out when the speaker is fully charged. Charges in approximately 2.5 hours for up to 11 hours of listening enjoyment.LISTENING TO YOUR AUDIO DEVICE (AUX MODE)1. Connect 3.5mm audio cable to Aux-in jack of the speaker. Plug the other end of the cable into an MP3, CD player or otheraudio device directly. 2. Slide the On/Off Switch on the side of the speaker to on. The LED Indicator light will illuminate blue.3. Play your audio device as you normally would, and adjust the volume on your audio device and with the Volume Rocker Button on the speaker to enjoy your music at the desired volume.Mobile Mini BT SpeakerFOR TABLETS, LAPTOPS OR SMARTPHONES12345674. For more bass, simply twist the Bass-Boost Cap on the top of the speaker counter-clockwise to pop the bass-boost up!5. To close the Bass-Boost Cap, push it down and twist clockwise until it sits securely on the base of the speaker.6. To disconnect the speaker from the audio source, remove the 3.5mm audio cable from your audio device.7. Slide the On/Off Switch on the side of the speaker to off. The LED Indicator light will go out.PAIRING TO YOUR DEVICE1. Prepare your device to pair using Bluetooth, making sure you are within 33 feet of Mobile Mini BT Speaker. Refer to your device’s owner’s manual for details if necessary. 2. Slide the On/Off Switch on the speaker to on. The LED indicator light will illuminate blue.3. Press and hold the Pairing button until the LED indicator light starts flashing. 4. The Mobile Mini BT Speaker is in pairing mode when the LEDLOCATION OF PARTSAND CONTROLS1. Bass-Boost Cap2. Micro USB Port3. AUX-In Port4. Pairing Button5. Volume Rocker Button6. On/Off Switch7. LED Indicator8. Micro USB cable (not shown)9. 3.5mm audio cable (not shown) undesired operation.Cet appareil est conforme à la norme RSS-210 de la règlementation d'Industrie Canada ; son utilisation est soumise aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.IC Radiation Exposure Statement The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
FoldFoldFoldFoldFoldFold838481 838482 838438Merrimack, New Hampshire, USA 03054 800-846-3000 • Brookstone.comONE (1) YEAR LIMITED WARRANTYBrookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone’s property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone’s property. Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at 1-800-292-9819. Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center for replacement, per our instructions. Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the “Brookstone” trademark, trade name, or logo affixed to them or their packaging. The Limited Warranty does not apply to any non-Brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is.” This warranty does not apply to: a) damage caused by failure to follow instructions relating to product’s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold “as is” including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose. BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.CARE AND STORAGE1. Dust the speaker with a soft, dry cloth.2. Store the speaker in its compact form in a cool, dry place.CAUTION• Do not stretch the Bass-Boost expandable resonator spring too far. This may damage the mechanism in the speaker.SPECIFICATIONSPower Supply: 5V, 500mATotal Output: 3WBluetooth Chip: Class 2, range 33 feetBluetooth Compability: Support A2DP 1.2 and AVRCP1.0 ProfilesLi-ion RechargeableBattery: 900mAhSpeaker: 1.75 inch, 4 OhmCharging Time: Approx. 2.5 hours Usage Time: Approx. 11 hours 801162_INS_Mobile Mini SpeakerInstructions Doc. Size: 250mm W x 115mm H Folded Size: 50mmW x 115mmH Output at 100% Prints 1/1 Black Finishing: Trim to Crops; Accordian Fold: 4 folds indicator is flashing. It will wait for a connection in pairing mode for up to 60 seconds.5. Once Mobile Mini BT Speaker is in pairing mode and your device is ready to pair, select “Mobile Mini”. If prompted, use 0000. as a PIN for the pairing code. 6. Once the Mobile Mini BT speaker is selected, the LED indicator will change to solid blue and one beep will sound to confirm pairing is completed. Note: To cancel the pairing mode either with the speaker’s On/Off switch off or wait 60 seconds for Mobile Mini BT Speaker to cancel pairing automatically. The LED indicator will return to solid blue and the unit will remain on.USING MOBILE MINI BT SPEAKER AFTER PAIRING1. Slide the On/Off Switch of the speaker to on. 2. The Mobile Mini BT Speaker should automatically remember your device. Depending upon your device, you may have to select “Mobile Mini” in your device’s menu.3. Play your audio device as you normally would, and adjust the volume on your device with the Volume Rocker Button on the speaker to enjoy your music at the desired volume.4. For more bass, simply twist the Bass-Boost Cap on the top of the speaker counter-clockwise to pop the bass-boost up!5. To close the Bass-Boost Cap, push it down and twist clockwise until it sits securely on the base of the speaker.6. To turn Mobile Mini BT Speaker off, slide the speaker’s On/Off switch on the side of the speaker to off. The LED indicator light will go out. SWTICHING BETWEEN BLUETOOTH MODE AND AUX-IN MODE1. Connect the Mobile Mini BT Speaker to your audio source using the 3.5mm audio cable (included). 2. Plug one end of cable jack into an MP3, CD player or other audio device directly. 3. Plug another end of cable jack into Mobile Mini BT Speaker AUX IN. (The AUX will take priority when plugged in with Bluetooth® of the Mobile Mini Speaker disabled and the speaker Bluetooth® will disconnect with any device)4. Play your audio device as you normally would, and adjust the volume on your device with the Volume Rocker Button on the speaker to enjoy your music at the desired volume. (The volume adjustment of Mobile Mini Speaker at Bluetooth mode and AUX-IN mode is separate and not synchronized)5. When the 3.5mm cable is unplugged from Mobile Mini BT Speaker, the Bluetooth® will turn active automatically and will auto- connect with last paired devices. (If the speaker kept playing in Bluetooth® when plugging in the 3.5mm cable, it will play automatically when unplugged and re-connected)NOTE: Only the volume of AUX-IN mode will return to default level every time the speaker restarts.Bluetooth is a registered trademark ofBluetooth SIG, Inc.

Navigation menu