Aruba Networks APIN0304305 Wireless Access Point User Manual
Aruba Networks, Inc. Wireless Access Point
Contents
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3146845 |
| Application ID | mFjpWdZvm0MjXeza3rRY/w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 12.37kB (154569 bits) |
| Date Submitted | 2016-09-26 00:00:00 |
| Date Available | 2017-03-25 00:00:00 |
| Creation Date | 2017-12-15 04:58:01 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-15 04:58:01 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
DATA SHEET ARUBA 300 SERIES ACCESS POINTS Entry-level 802.11ac Wave 2 Access Points The entry-level Aruba 300 Series Wave 2 access points deliver high performance and superb user experience for medium density environments. Featuring 3x3:3SS MU-MIMO capability, Aruba advanced ClientMatch radio management, and integrated Aruba Beacons, the 300 Series enables an all wireless digital work environment in a costefective manner. With a maximum concurrent data rate of 1,300 Mbps in the 5GHz band and 400 Mbps in the 2.4GHz band (for an aggregate peak data rate of 1.7Gbps), the entry-level 300 Series brings an always-on wireless network experience with the performance required for enterprises. It is ideal for costsensitive medium density environments across verticals. mobility context to develop applications that will deliver an enhanced user experience and increase the value of the wireless network for organizations. UNIQUE BENEFITS • Dual Radio 802.11ac Access Point with Multi-User MIMO - Supports up to 1,300 Mbps in the 5GHz band (with The high performance 802.11ac 300 Series supports multi- 3SS/VHT80 clients) and up to 400 Mbps in the 2.4GHz user MIMO (MU-MIMO) and 3 spatial streams (3SS). It band (with 2SS/VHT40 clients). provides simultaneous data transmission to multiple devices (up to two), maximizing data throughput and improving network eiciency. The 300 Series includes the enhanced ClientMatch technology that extends the client steering technology with MU-MIMO client awareness. It automatically identiies MU-MIMO capable mobile devices and steers those devices to the closest MU-MIMO capable Aruba access point. By grouping MU-MIMO capable mobile devices together, the network starts taking advantage of the simultaneous transmission to these devices, increasing its overall capacity. These dynamic roaming policies that are based on device types, help customers achieve the best WLAN performance in a mixed device environment during the technology transition period. The 300 Series also has an integrated Bluetooth Aruba Beacon that simpliies the remote management of a network of large- • Built-in Bluetooth Low-Energy (BLE) radio - Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time. - Enables management of your deployment of batterypowered Aruba Beacons. • Advanced Cellular Coexistence (ACC) - Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment. Quality of service for uniied communication apps. • Quality of service for Uniied Communication apps - Supports priority handling and policy enforcement for uniied communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing. • RF Management - Adaptive Radio Management (ARM) technology automatically scale battery-powered Aruba Beacons while also providing assigns channel and power settings, provides airtime advanced location and indoor wayinding, and proximity-based fairness, and ensures that APs stay clear of all sources of RF push notiication capabilities. It enables businesses to leverage interference to deliver reliable, high-performance WLANs. DATA SHEET ARUBA 300 SERIES ACCESS POINTS - The Aruba 300 Series APs can be conigured to provide part-time or dedicated air monitoring for spectrum analysis and wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available. • Intelligent app visibility and control - AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 2,500 enterprise apps or groups of apps. • Security - Integrated wireless intrusion protection ofers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances. - IP reputation and security services identify, classify, and block malicious iles, URLs and IPs, providing comprehensive protection against advanced online threats. - Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys. • Intelligent Power Monitoring (IPM): - Enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities. - For the 300 Series APs, the IPM power-save feature applies when the unit is powered by an 802.3af PoE source. By default, the USB interface will be the irst feature to turn of if AP power consumption exceeds the available power budget. In rare cases it may be necessary to take additional power saving measures, but in most cases, the 300 Series APs will operate in unrestricted mode. CHOOSE YOUR OPERATING MODE Aruba 300 Series APs ofer a choice of operating modes to meet your unique management and deployment requirements. • Controller-managed mode – When managed by Aruba Mobility Controllers, Aruba 300 Series APs ofer centralized coniguration, data encryption, policy • Remote AP (RAP) for branch deployments. • Air monitor (AM) for wireless IDS, rogue detection and containment. • Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference. • Secure enterprise mesh. For large installations across multiple sites, the Aruba Activate service signiicantly reduces deployment time by automating device provisioning, irmware upgrades, and inventory management. With Aruba Activate, Instant APs are factoryshipped to any site and conigure themselves when powered up. AP-300 SERIES SPECIFICATIONS • AP-304 (controller-managed) and IAP-304 (Instant): - 802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a total of three dual-band RP-SMA connectors for external antennas • AP-305 (controller-managed) and IAP-305 (Instant): - 802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a total of three integrated omni-directional downtilt dualband antennas WI-FI RADIO SPECIFICATIONS • AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO • Software-conigurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1) • 5GHz: Three spatial stream Single User (SU) MIMO for up to 1,300 Mbps wireless data rate to individual 3x3 VHT80 client devices • 5GHz: Two spatial stream Multi User (MU) MIMO for up to 867 Mbps wireless data rate to up to two (1x1 VHT80) MU-MIMO capable client devices simultaneously • 2.4GHz: Two spatial stream Single User (SU) MIMO for up enforcement and network services, as well as distributed to 400 Mbps wireless data rate to individual 2x2 VHT40 and centralized traic forwarding. client devices (300 Mbps for HT40 802.11n client devices) • Aruba Instant mode – In Aruba Instant mode, a single AP automatically distributes the network coniguration to other Instant APs in the WLAN. Simply power-up one • Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio • Supported frequency bands (country-speciic Instant AP, conigure it over the air, and plug in the other restrictions apply): APs – the entire process takes about ive minutes. If WLAN - 2.400 to 2.4835GHz requirements change, a built-in migration path allows - 5.150 to 5.250GHz 300 Series Instant APs to become part of a WLAN that is - 5.250 to 5.350GHz managed by a Mobility Controller. - 5.470 to 5.725GHz - 5.725 to 5.850GHz DATA SHEET ARUBA 300 SERIES ACCESS POINTS • Available channels: Dependent on conigured regulatory domain • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum • Supported radio technologies: - 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) WI-FI ANTENNAS • AP-304/IAP-304: Three RP-SMA connectors for external dual band antennas. Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz. • AP-305/IAP-305: Three integrated dual-band downtilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz. • Supported modulation types: Built-in antennas are optimized for horizontal ceiling - 802.11b: BPSK, QPSK, CCK mounted orientation of the AP. The downtilt angle for - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM maximum gain is roughly 30 degrees. • Transmit power: Conigurable in increments of 0.5 dBm - The maximum gain of the combined (summed) antenna • Maximum (conducted) transmit power (limited by local patterns for all elements operating in the same band is regulatory requirements): 5.4dBi in 2.4GHz and 7.6dBi in 5GHz. - 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) - 5GHz band: +18 dBm per chain, +23 dBm aggregate (3x3) - Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks • Maximum ratio combining (MRC) for improved receiver performance • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance • Short guard interval for 20MHz, 40MHz and 80MHz channels • Space-time block coding (STBC) for increased range and improved reception • Low-density parity check (LDPC) for high-eiciency error correction and increased throughput OTHER INTERFACES • One 10/100/1000BASE-T Ethernet network interface (RJ-45) - Auto-sensing link speed and MDI/MDX - 802.3az Energy Eicient Ethernet (EEE) • USB 2.0 host interface (Type A connector) • Bluetooth Low Energy (BLE) radio - Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity - Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi (AP-305/IAP-305) • Visual indicators (multi-color LEDs): for System and Radio status • Reset button: factory reset (during device power up) • Serial console interface (proprietary; optional adapter cable available) • Kensington security slot • Transmit beam-forming (TxBF) for increased signal reliability and range • Supported data rates (Mbps): - 802.11b: 1, 2, 5.5, 11 - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 - 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15) POWER SOURCES AND CONSUMPTION • The AP supports direct DC power and Power over Ethernet (PoE) • When both power sources are available, DC power takes priority over PoE - 802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23) • Power sources are sold separately - 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3 for • Direct DC source: 12Vdc nominal, +/- 5% VHT20/40/80 • 802.11n high-throughput (HT) support: HT 20/40 • 802.11ac very high throughput (VHT) support: VHT 20/40/80 • 802.11n/ac packet aggregation: A-MPDU, A-MSDU - Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source - Unrestricted functionality with 802.3at PoE DATA SHEET ARUBA 300 SERIES ACCESS POINTS - When using IPM, the AP may enter power-save mode with reduced functionality when powered by an 802.3af RELIABILITY MTBF: 1,116,000hrs (127yrs) at +25C operating temperature PoE source (see details on Intelligent Power Monitoring elsewhere in this datasheet) - Without IPM, the USB port is disabled when the AP is powered by and 802.3af PoE source REGULATORY MODEL NUMBERS • AP-304 and IAP-304: APIN0304 • AP-305 and IAP-305: APIN0305 • Maximum (worst-case) power consumption: 13W (PoE) or 11W (DC) - Excludes power consumed by external USB device (and CERTIFICATIONS • CB Scheme Safety, cTUVus internal overhead); this could add up to 6.5W (PoE) or • UL2043 plenum rating 5.5W (DC) for a 5W/1A USB device • Wi-Fi Alliance (WFA) certiied 802.11a/b/g/n/ac • Maximum (worst-case) power consumption in idle mode: 3.7W (PoE) or 2.6W (DC) MOUNTING • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch lat T-bar drop-tile ceiling • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details MECHANICAL • Dimensions/weight (unit, excluding mount accessories): - 165mm x 165mm x 38mm - 460g • Dimensions/weight (shipping): - 205mm x 205mm x 52mm - 620g ENVIRONMENTAL • Operating: - Temperature: 0° C to +50° C (+32° F to +122° F) - Humidity: 5% to 95% non-condensing • Storage and transportation: - Temperature: -40° C to +70° C (-40° F to +158° F) REGULATORY • FCC/Industry of Canada • CE Marked • R&TTE Directive 1995/5/EC • Low Voltage Directive 72/23/EEC • EN 300 328 • EN 301 489 • EN 301 893 • UL/IEC/EN 60950 • EN 60601-1-1, EN60601-1-2 For more country-speciic regulatory information and approvals, please see your Aruba representative. WARRANTY • Aruba limited lifetime warranty MINIMUM OPERATING SYSTEM SOFTWARE VERSIONS • ArubaOS 6.5.1.0 • Aruba InstantOS 4.3.1.0 DATA SHEET ARUBA 300 SERIES ACCESS POINTS RF PERFORMANCE TABLE Maximum transmit power (dBm) per transmit chain Receiver sensitivity (dBm) per receive chain 1 Mbps 18.0 -95.0 11 Mbps 18.0 -88.0 6 Mbps 18.0 -92.0 54 Mbps 18.0 -74.0 MCS0/8 18.0 -91.0 MCS7/15 18.0 -71.0 MCS0/8 18.0 -88.0 MCS7/15 18.0 -68.0 6 Mbps 18.0 -92.0 54 Mbps 18.0 -74.0 MCS0/8/16 18.0 -91.0 MCS7/15/23 18.0 -71.0 MCS0/8/16 18.0 -88.0 MCS7/15/23 17.0 -68.0 MCS0 18.0 -91.0 MCS8 18.0 -67.0 MCS0 18.0 -88.0 MCS9 17.0 -63.0 MCS0 18.0 -85.0 MCS9 17.0 -58.0 802.11b 2.4GHz 802.11g 2.4GHz 802.11n HT20 2.4GHz 802.11n HT40 2.4GHz 802.11a 5GHz 802.11n HT20 5GHz 802.11n HT40 5GHz 802.11ac VHT20 5GHz (SU-MIMO) 802.11ac VHT40 5GHz (SU-MIMO) 802.11ac VHT80 5GHz (SU-MIMO) Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings. DATA SHEET ARUBA 300 SERIES ACCESS POINTS ORDERING INFORMATION Part Number Description AP-300 Series Access Points AP-304 Aruba AP-304 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio Antenna Connectors AP AP-305 Aruba AP-304 FIPS/TAA-compliant 802.11n/ac Dual 2x2:2/3x3:3 MU-MIMO Dual Radio Antenna Connectors AP Mounting Spares Indoor Access Point suspended ceiling rail mount kit (for lat rails only, black). Spare for the clips provided with the AP. AP-220-MNT-C1 Mounting Accessories AP-220-MNT-C2 Indoor Access Point suspended ceiling rail mount kit (for Interlude and Silhouette rail styles only, black). Alternate to standard clips provided with AP. AP-MNT-CM1 Indoor Access Point suspended ceiling rail mount kit (industrial grade, metal). Fits most rail types AP-220-MNT-W1 Indoor Access Point lat-surface mount kit (basic, black) AP-220-MNT-W1W Indoor Access Point lat-surface mount kit (basic, white). Mechanically identical to AP-220-MNT-W1 AP-220-MNT-W3 Indoor Access Point lat surface mount kit (box style, secure, low-proile, large). Color: white Other Accessories AP-305-CVR-20 Kit of 20 snap-on covers for AP-305. Plain white, non-glossy, with holes for LED indicators. Color: white Generic Indoor AP Accessories AP-AC-12V30B 12V/30W AC-to-DC Desktop Style Power Adapter with Type B DC plug (2.1/5.5/9.5mm circular, 90-degree angled). Note: does not include country speciic AC power cord (PC-AC-xx). PD-3501G-AC 15.4W 802.3af PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country speciic AC power cord (PC-AC-xx) PD-9001GR-AC 30W 802.3at PoE midspan injector, 10/100/1000BASE-T Ethernet. Note: does not include country speciic AC power cord (PC-AC-xx) Antennas See info on Aruba website for antenna part numbers 1344 CROSSMAN AVE | SUNNYVALE, CA 94089 1.844.473.2782 | T: 1.408.227.4500 | FAX: 1.408.227.4550 | INFO@ARUBANETWORKS.COM www.arubanetworks.com DS_AP300Series_081516
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Annotate, Fill forms, Extract Create Date : 2016:08:22 10:39:48-07:00 Creator : Adobe InDesign CC 2015 (Macintosh) Modify Date : 2016:09:21 21:32:28+08:00 Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Metadata Date : 2016:09:21 21:32:28+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:bbd320ea-5171-4ba1-8094-d1d77ca64091 Original Document ID : xmp.did:90BC2A4F152168118C14F46247E01B1B Document ID : xmp.id:fadcc14b-ca5e-4828-a81f-8df340126e6d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:acfd63f7-aeaf-42f9-9d06-ed1911eec821 Derived From Document ID : xmp.did:E0B11DBB38206811822ABD53D1A74790 Derived From Original Document ID: xmp.did:90BC2A4F152168118C14F46247E01B1B Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:08:22 10:39:48-07:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 6EXIF Metadata provided by EXIF.tools