Ascalade Technologies DT19R51H 1.9GHZ CORDLESS PHONE User Manual B255OMR00 002

Ascalade Technologies, Inc. 1.9GHZ CORDLESS PHONE B255OMR00 002

Contents

USERS MANUAL 1

CD450/455User Guide PCE DRAFT 1.8/1.9GHZDECT TELEPHONEDIGITAL ANSWERING MACHINE LOW RADIATION CALLER IDHANDS-FREE
3Important Safety InstructionsImportant Safety InstructionsSome of the following information may not apply to your particular product; however, when using telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.4. Telephones should not be used while you are in a bathtub, shower or pool. Immersion of the telephone or handset in water could cause an electrical shock.5. Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation unless proper ventilation is provided.6. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.7. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.8. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.10. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.11. Do not expose the product to extreme temperatures such as areas near a hot radiator or stove or in a hot car.12. Do not place lighted candles, cigarettes, cigars, etc., on the telephone.13. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.14. Never install or modify telephone wiring during a lightning storm.15. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.16. Use caution when installing or modifying telephone lines to prevent electrical shock and/or fire.17. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:A. When the power supply cord or plug is damaged or frayed.B. If the product has been exposed to rain or water.C. If the product does not operate normally by following the operating instructions.D. If the product’s cabinet has been damaged.E. If the product exhibits a distinct change in performance.18. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.19. Do not use the telephone to report a gas leak in the vicinity of the leak.20. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.
4Important Safety InstructionsIF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED:1. Use only the type and size of battery(ies) specified in the user manual.2. Do not dispose of the battery(ies) in fire. They may explode. Check with local codes for possible special disposal instructions.3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.4. Exercise care in handling battery(ies) in order not to short out the battery(ies) with conducting materials such as rings, bracelets, and keys. The battery(ies) or conductor may overheat and cause burns.5. Do not attempt to recharge the battery(ies) provided with or identified for use with this product that are not intended to be charged. The battery(ies) may leak corrosive electrolyte or explode.6. Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery(ies) electrolyte may occur causing burns or irritation to eyes or skin.7. When replacing battery(ies), all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged battery(ies). (Applies to products employing more than one separately replaceable primary battery.)8. When inserting battery(ies) into this product, the proper polarity or direction must be observed. Reverse insertion of battery(ies) can cause charging, and that may result in leakage or explosion.9. Remove battery(ies) from this product if storing over 30 days because the battery(ies) could leak and damage the product.10. Discard “dead” battery(ies) as soon as possible since “dead“ batteries are more likely to leak in a product.11. Do not store this product, or the battery(ies) provided with or identified for use with this product, in high-temperature areas.Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage.12. If your product uses rechargeable battery(ies), charge the battery(ies) only in accordance with the instructions and limitation specified in the User Manual.SAVE THESE INSTRUCTIONS
- 1 - Table of Contents 1111EnvironmentEnvironmentEnvironmentEnvironment ............................................................................................................................................................................................................................................................................................................................................................................................................22222222SafetySafetySafetySafety ....................................................................................................................................................................................................................................................................................................................................................................................................................................................33333333 What’s in the Box?What’s in the Box?What’s in the Box?What’s in the Box?........................................................................................................................................................................................................................................................................................................................................................................55554444WelcomeWelcomeWelcomeWelcome................................................................................................................................................................................................................................................................................................................................................................................................................................66665555About your phoneAbout your phoneAbout your phoneAbout your phone............................................................................................................................................................................................................................................................................................................................................................................77776666 Getting StartedGetting StartedGetting StartedGetting Started .................................................................................................................................................................................................................................................................................................................................................................................... 111111117777CallCallCallCall ............................................................................................................................................................................................................................................................................................................................................................................................................................................................ 171717178888 Intercom and Conference CallsIntercom and Conference CallsIntercom and Conference CallsIntercom and Conference Calls................................................................................................................................................................................................................................................................................ 222222229999Text and NumbersText and NumbersText and NumbersText and Numbers................................................................................................................................................................................................................................................................................................................................................................ 2424242410101010 PhonebookPhonebookPhonebookPhonebook............................................................................................................................................................................................................................................................................................................................................................................................................ 2525252511111111 Call LoCall LoCall LoCall Log and Redial Listg and Redial Listg and Redial Listg and Redial List................................................................................................................................................................................................................................................................................................................................ 2929292912121212 Custom OptionsCustom OptionsCustom OptionsCustom Options............................................................................................................................................................................................................................................................................................................................................................................ 3131313113131313 Calling FeaturesCalling FeaturesCalling FeaturesCalling Features ............................................................................................................................................................................................................................................................................................................................................................................ 3333333314141414 Network ServicesNetwork ServicesNetwork ServicesNetwork Services........................................................................................................................................................................................................................................................................................................................................................................ 3838383815151515 Extra FeaturesExtra FeaturesExtra FeaturesExtra Features ........................................................................................................................................................................................................................................................................................................................................................................................ 4242424216161616 The SystemThe SystemThe SystemThe System ........................................................................................................................................................................................................................................................................................................................................................................................................ 4545454517171717 The Answering MachineThe Answering MachineThe Answering MachineThe Answering Machine............................................................................................................................................................................................................................................................................................................................ 4848484818181818 AppendixAppendixAppendixAppendix........................................................................................................................................................................................................................................................................................................................................................................................................................ 56565656 - 2 - Environment Environmental Remember to observe local regulations regarding the disposal of your packaging materials, exhausted batteries and old equipment. Promote their recycling where possible. Recycling & disposal Disposal instructions for old products: The purpose of the WEEE directive (Waste Electrical and Electronic Equipment; 2002/96/EC) is to ensure that products are recycled using the best available treatment, recovery and recycling techniques to ensure human health and high environmental protection. Your product is designed and manufactured with high quality materials and components which can be recycled and reused. •Do not dispose of your old product in your general household waste bin. •Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol. Use one of the following disposal options: •Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities. •If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive. Disposal instructions for batteries: Batteries should not be disposed of with general household waste.
- 3 - Safety IMPORTANT This product is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. Power requirements This product requires an electrical supply of 100-240 volts, single-phase alternating current, excluding IT installations defined in standard EN 60950. Handset Charger Adapter Input: 100-240VAC 50/60Hz Output: 7.5VDC 200mA Base Unit Adapter Input: 100-240VAC 50/60Hz Output: 7.5VDC 500mA Battery requirements The handset requires a power source of two rechargeable NiMH batteries, size AAA 1.2V 750mAh (HR10/44). CAUTION: Use only the mains adapter supplied with this equipment. Incorrect adapter polarity or voltage can seriously damage the unit. CAUTION: The electrical network is classified as dangerous according to criteria in the standard EN 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use the recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations. Safety - 4 - Telephone connections The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard EN 60950). Following a power cut, the call in progress as well as the date and time settings is lost. Hearing aid Please note that this telephone works by sending radio signals between the base unit and the handset. These signals may interfere with some hearing aids, causing a humming noise. Safety precautions •Do not allow the handset to come into contact with liquids or moisture. •Do not open the handset, base unit or charger. This could expose you to high voltages. •Do not allow the charging contacts or the battery to come into contact with conductive materials. •There is a slight chance that your product could be damaged by an electrical storm. We recommend that you unplug the product from the power supply and telephone socket during a storm. •Do not use the handset in an explosive hazard area such as where there is gas leaking. •It is recommended that this product is not used near intensive care medical equipment or by persons with pacemakers. •This product can interfere with electrical equipment such as answering machines, television, radio, and computers if placed too close. We recommend that you position the base unit at least one meter from such appliances. The marking certifies compliance with technical regulations in accordance with Directive 1999/5/EC for the safety of the user, electromagnetic perturbations and for radio spectrum.
- 5 - What’s in the Box? Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. This product comes with the following items. For missing item(s), contact your dealer. Base Unit with bracket Handset x1 Handset Battery Cover x1 Base Power Adapter NiMH AAA Rechargeable Battery x2 Telephone Line Cord x1 This User Guide Quick Start Guide Warranty Leaflet Charger Charger Power Adapter Jack Adapter - 6 - Welcome This user guide provides you with the information and instructions you need to get the most from your phone. HOW TO USE THIS USER GUIDE? The following symbols are used to alert you to important information. Warning:::: Critical information for preventing personal injury. Caution:Caution:Caution:Caution: Critical information for preventing damage to the product. Tip:Tip:Tip:Tip: Information for easier operation. Note:Note:Note:Note: Explanatory or critical information for carrying out an operation correctly. NEED MORE HELP? •See the Frequently asked questions section in this user guide on page 58. •Visit our online help www.philips.com/support
- 7 - About your phone THE HANDSET 1111 Up Navigation & Call Log keyUp Navigation & Call Log keyUp Navigation & Call Log keyUp Navigation & Call Log key Scroll up menu Increase earpiece volume Enter call log 2222 Left soft keyLeft soft keyLeft soft keyLeft soft key Confirm selection Enter options menu 3333 Right sRight sRight sRight soft key 2oft key 2oft key 2oft key 2 Delete text or digit(s) Cancel operation View more record information 4444 Talk & Recall keyTalk & Recall keyTalk & Recall keyTalk & Recall key Make and receive calls Send flash signal 5555 End & On / Off keyEnd & On / Off keyEnd & On / Off keyEnd & On / Off key End call Exit menu / operation Turn handset on/off 6666 Menu keyMenu keyMenu keyMenu key Access main menu 7777 Down Navigation & Phonebook keyDown Navigation & Phonebook keyDown Navigation & Phonebook keyDown Navigation & Phonebook key Scroll down menu Decrease earpiece volume Enter phonebook 8888 Speaker keySpeaker keySpeaker keySpeaker key Turn speaker on / off 9999 Redial keyRedial keyRedial keyRedial key Enter redial list & dial last number 12121212 Ringer Off & Pause keyRinger Off & Pause keyRinger Off & Pause keyRinger Off & Pause key Dial # and enter pause Turn ringer on / off Change input letter case 10101010 Digit keysDigit keysDigit keysDigit keys Dial digit and enter text Use as shortcut key for quick dial 13131313 Mute keyMute keyMute keyMute key Mute / unmute microphone 11111111 StarStarStarStar & Keylock key & Keylock key & Keylock key & Keylock key Dial * & send temp DTMF signal Lock / unlock keypad 14141414 IntercomIntercomIntercomIntercom & Conference key & Conference key & Conference key & Conference key Make intercom call Make conference call About Your Phone - 8 - THE BASE AND ANSWERING MACHINE 1111 Answering Machine OnAnswering Machine OnAnswering Machine OnAnswering Machine On //// Off keyOff keyOff keyOff key Turn the answering machine on / off 5555 Rewind keyRewind keyRewind keyRewind key Skip backward during playback 2222 Volume downVolume downVolume downVolume down Decrease speaker volume 6666 Play &Play &Play &Play & Stop Stop Stop Stop key key key key Play messages Stop message playback 3333 Delete keyDelete keyDelete keyDelete key Delete messages 7777 Forward keyForward keyForward keyForward key Skip forward during playback 4444 Volume upVolume upVolume upVolume up Increase speaker volume 8888 Page keyPage keyPage keyPage key Find handset(s) Enter registration mode 9999 7777----segment displaysegment displaysegment displaysegment display Display message number Display answering machine operation
About Your Phone - 9 - THE ICONS Each icon gives you a visual message of what is happening on your handset. Battery level Signal strength Call in progress Alarm on Speaker on Ringer off Call log Phonebook Answering machine Voicemail indicator More options upward More options downward THE MENUS Your phone offers a variety of features and functions grouped in the menus. Browsing the menus The main menu includes the Phonebook, Clock & Alarm, Personal Set, Advanced Set, Network Service and Answering Machine menus. From standby mode, you can, •Press to enter the main menu. •Press to enter the incoming call log. •Press to enter the phonebook. •Press to enter the redial list. TIP: Use or to navigate the menus. TIP: Quick Exit.Quick Exit.Quick Exit.Quick Exit. Press and hold to exit from any menu instantly. All unconfirmed changes will not be saved. About Your Phone - 10 - Taking a glance at the menus Main menuMain menuMain menuMain menu OtheOtheOtheOther menusr menusr menusr menus PhonebookPhonebookPhonebookPhonebook Advanced setAdvanced setAdvanced setAdvanced set Answer machineAnswer machineAnswer machineAnswer machine Call logCall logCall logCall log New entry List entry Edit entry Select melody Delete entry Delete all Direct memory Play Delete all Answer on/off Record OGM Answer mode* Ans settings Call list Copy to phbk Delete Delete all TAM* Redial listRedial listRedial listRedial list Clock & alarmClock & alarmClock & alarmClock & alarm Set date & time Set format* Alarm Alarm tone Easy call* Conference* Call barring* Russian CID* XHD sound* Change PIN Registration Unregister Country* Reset Area code* Carrier code* Auto prefix* Recall time Dial mode* First ring* Redial list Copy to phbk Delete Delete all Personal setPersonal setPersonal setPersonal set Net services*Net services*Net services*Net services* Handset name Handset tones Language* Contrast* Auto hang up* Backlight* Call forward Callfwd busy Callfwd unans Voicemail 1 Voicemail 2 Info 1 Info 2 Call return Cancel call back Withhold ID * This menu item is * This menu item is * This menu item is * This menu item is countrycountrycountrycountry----dependent.dependent.dependent.dependent.
- 11 - Getting Started CONNECTING YOUR PHONE 1. Connect the output plug of the mains adapter to the bottom of the base unit. 2. Connect the mains adapter to a standard wall outlet. 3. Connect the telephone line cord to the phone socket at the bottom of the base unit and the wall phone socket. CONNECTING YOUR CHARGER * For multi* For multi* For multi* For multi----pack pack pack pack models models models models onlyonlyonlyonly 1. Connect the output plug of the mains adapter to the bottom of the charger. 2. Connect the mains adapter to a standard wall outlet. Getting Started - 12 - WALL MOUNTING THE BASE The charger is designed to support wall mounting. If you prefer to wall mount the charger, follow the instructions below. 1. Remove the bracket from the back of the base unit by pressing down the two latches on the top of the bracket. 2. Turn the bracket upside down and then re-insert the bracket to the back of the base unit. [Image to be added][Image to be added][Image to be added][Image to be added] 3. Insert screws (not included) into the wall. The recommended mounting screws are Philips Pan Head Self-Tapping Screws with diameter 4mm and length 20mm. [Image to be added][Image to be added][Image to be added][Image to be added] 4. Align the mounting holes on the back of the base with the screws on the wall. 5. Slide the base down into place. CAUTION: Other wall mounting methods are not recommended and may damage the product.
Getting Started - 13 - CHARGING YOUR HANDSET 1. Place the 2 rechargeable batteries (included) into the battery compartment. 2. Slide the battery door firmly into place. 3. Place the handset on the base unit or charger for charging. WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use recommended type supplied with this product. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations. NOTE: Charge the handset(s) for 24 hours before initial use!NOTE: Handset may get warm during initial charging. This is normal. The handset may take a few seconds to power up. CAUTION: Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product. Getting Started - 14 - CHECKING THE BATTERY LEVEL The battery icon displays the current battery level. = Battery full = Battery empty. Require charging. Your handset may power down shortly if it is not charged after the battery is empty. If you are on the phone when the battery is nearly empty, you will hear warning tones. Your call may be cut off shortly after the warning. GREETING YOU WITH “WELCOME” This feature only applies to model(s) with multipleThis feature only applies to model(s) with multipleThis feature only applies to model(s) with multipleThis feature only applies to model(s) with multiple----country or language support.country or language support.country or language support.country or language support. At first startup, your handset greets you with a “Welcome” message. After the welcome message, you can set the country or language to start using the phone. Setting your country/language It is necessary to set the correct country for the phone for it to work properly according to your country’s standards. After the welcome message, 1. Select your country or language. 2. Press OK to confirm. The country/language setting is saved. After setting the country/language, you can set the date and time. Your phone is now ready to use. To re-configure your country or language setting, see Changing the country setting on page 46 or Setting the display language on page 31. NOTE: Date/Time.Date/Time.Date/Time.Date/Time. Press BACKto skip date/time setting.NOTE: Press OKto skip the welcome message.
Getting Started - 15 - SETTING THE CLOCK Your phone has a digital clock. Set the clock before initial use of the phone. Setting the date and time 1. Press . 2. Select CCCClock & lock & lock & lock & alarmalarmalarmalarm  SSSSet date et date et date et date &&&& time time time time. Press OK. 3. Use the digit keys to enter the date. 4. Press OK. The handset displays the time editing screen. 5. Use digit keys to enter the time. 6. Press OK. The setting is saved. Setting the date and time format This feature only applies to model(s) with date/time format support. This feature only applies to model(s) with date/time format support. This feature only applies to model(s) with date/time format support. This feature only applies to model(s) with date/time format support. You can choose how your phone displays the date (DD/MM or MM/DD) and time (12-hour or 24-hour). 1. Press . 2. Select CCCClock & lock & lock & lock & alarmalarmalarmalarm  SSSSet et et et formatformatformatformat. Press OK. 3. Select DDDDate formatate formatate formatate format or TTTTime formatime formatime formatime format. . . . 4. Select the setting you want. 5. Press OK. The setting is saved. WHAT IS STANDBY MODE? Your phone is in standby mode when it is idle. The standby screen displays the handset name, the handset number, the date and time, the signal icon, and the battery icon. Getting Started - 16 - CHECKING THE SIGNAL STRENGTH The signal icon displays the link status between your handset and the base unit. A steady icon means your handset and the base unit are linked. A flashing icon means your handset and the base unit are not linked. If you move too far away from the base unit while you are on the phone, you will hear warning tones notifying you that your handset is almost out of range – lost link. Take your handset closer to the base unit or your call may be cut off shortly after the warning. SWITCHING YOUR HANDSET ON/OFF Switching on your handset 1. Press . The handset may take a few seconds to power up. Switching off your handset 1. Press and hold . The handset’s screen turns off. NOTE: If your handset has lost link, you will not be able to make or receive any calls. You will also not be able to carry out many of the phone’s functions and features. NOTE: Your handset cannot receive any calls if the power is switched off.
- 17 - Call MAKING A CALL This section describes the different ways to make a call. 1. Press . 2. Dial the phone number. The number displays on the screen and is dialed out. Pre-dialing Pre-dialing lets you view and edit the number before making the call. 1. Enter the phone number. The number displays on the screen. You can make changes before dialing out. 2. Press to dial out the call. NOTE: Low Battery.Low Battery.Low Battery.Low Battery. During a call, you will hear warning tones if your handset is almost out of battery. Charge your handset or your call may soon be cut off. For details, see Checking the battery level on page 14. TIP: Press BACKto erase a digit. Press and hold to enter a pause. P displays on the screen.NOTE: Signal StrengthSignal StrengthSignal StrengthSignal Strength. Check the signal strength before making a call and during a call. For details, see Checking the signal strength on page 16. NOTE: Emergency Call.Emergency Call.Emergency Call.Emergency Call. This telephone is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. NOTE: Call Timer.Call Timer.Call Timer.Call Timer. The call timer displays the talk time of your current call.Call - 18 - Redialing the last number 1. Press . 2. Press . The last number displays on screen and is dialed out. Calling from the redial list 1. Press . 2. Select the record you want to call. 3. Press . The number is dialed out. Calling from the phonebook For details on the phonebook, see Phonebook on page 25. 1. Press to access the phonebook. 2. Select the phonebook record you want to call. 3. Press to dial out the call. Calling from the call log You can return a call from the incoming (received or missed) call log. For details, see Call Log on page 29. 1. Enter the call log. 2. Select the record you want to call. 3. Press to dial out the call. ENDING A CALL 1. Press . TIP: Auto hang upAuto hang upAuto hang upAuto hang up. Place the handset on the base or charging cradle to end the call automatically. See Auto hang up on page 33.
Call - 19 - ANSWERING A CALL If you have a Russia model phone, refer to the If you have a Russia model phone, refer to the If you have a Russia model phone, refer to the If you have a Russia model phone, refer to the AnsweringAnsweringAnsweringAnswering aaaa callcallcallcall (For(For(For(For RussiaRussiaRussiaRussia----model)model)model)model) section. section. section. section. When you receive a call, your phone rings. Press or to answer the call. Turning off the ringer You can turn off the ringer for all incoming calls. 1. Press and hold during standby. displays on the screen. For details on the ringer setting, see Personalizing your phone’s sounds on page 32. ANSWERING A CALL (FOR RUSSIA-MODEL) If you have a Russia-model phone, the tips and notes mentioned in the Answering a call section still applies to you. However, in your country, there are 2 ways to answer a call depending on your Caller ID setting. NOTE: RingerRingerRingerRinger. When the handset rings during an incoming call, do not put the handset too close to your ear as the ringer volume may damage your hearing. TIP: Silent RingerSilent RingerSilent RingerSilent Ringer. When the phone is ringing, press to turn off the ringer for the current call. NOTE: HandsfreeHandsfreeHandsfreeHandsfree. Handsfree activation can suddenly increase the earpiece volume to a very high level. Make sure the handset is not too close to your ear. NOTE: Caller ID Service. Caller ID Service. Caller ID Service. Caller ID Service. Subscribe from your service provider. TIP: Missed Call AlertMissed Call AlertMissed Call AlertMissed Call Alert. When a call is missed, your handset displays a notification message. The handset’s LED and icon also flash. Call - 20 - Caller ID service enabled, 1. Press OK to view the Caller ID when your phone is ringing. 2. Press or to answer the call. Caller ID service disabled, 1. Press or to answer the call when your phone is ringing. Russian CID setting This feature changes the caller ID setting. 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced set set set set  Russian CID Russian CID Russian CID Russian CID. Press OK. 3. Select the new setting. Press OK. The setting is saved. DURING A CALL This section describes the features that are available during a call. Adjusting the earpiece volume 1. Press or to adjust the volume during a call. Press OK to confirm. Muting the microphone The mute feature allows you to speak to someone in the house privately. 1. Press during a call. Your handset displays Mute onMute onMute onMute on. The caller cannot hear you, but you can still hear his voice. Press again to un-mute the microphone. You can now communicate with the caller. USING THE SPEAKER OR HANDSFREE 1. Press to turn on/off the speaker.
Call - 21 - MAKING A SECOND CALL During a call, 1. Press OROROROR Press OK. Select Init Init Init Init 2nd2nd2nd2nd callcallcallcall. Press OK again. Your first call will be put on hold. 2. Dial the number you want. The number displays on the screen and is dialed out. Answering a second call During a call, your phone sounds a short beep periodically to notify you of an incoming call. 1. Press to answer the call. The first call is put on hold, and you are now connected to the second call. Toggling between two external calls 1. Press OROROROR Press OK and select Switch callSwitch callSwitch callSwitch call. Press OK. The current call is put on hold, and you are now connected to the other call. NOTE: 2nd Call Service2nd Call Service2nd Call Service2nd Call Service. Subscribe from your service provider.NOTE: 2nd Call Service2nd Call Service2nd Call Service2nd Call Service. Subscribe from your service provider.TIP: ConferenceConferenceConferenceConference. The conference feature may require additional charges from your service provider. To start a conference call, while connected to two external calls, you can press OK, select ConferenceConferenceConferenceConference, and then press OK again. You can now talk to both parties at once. - 22 - Intercom and Conference Calls An intercom call is a call to another handset that shares the same base unit. A conference call involves a conversation between another handset and outside caller(s). CALLING ANOTHER HANDSET 1. Press . 2. Select or press the target handset number. Press OK. 3. Wait for the other party to answer your call. 4. Press to cancel or end the intercom call. While you are on the phone While talking on the phone, you can call another handset. 1. Press during the call. The external caller is automatically being put on hold. 2. Select or press the target handset number. Press OK. 3. Wait for the other party to answer your call. To toggle between the calls 1. Press to switch between the outside call and the intercom call. TRANSFERRING A CALL 1. Press during a call. 2. Select or press the target handset number. Press OK. 3. Press after the other party answers your call. The outside call is now transferred to the other handset. NOTE: If the base unit only has 2 handsets (yours and another handset)registered to it, you can press to call the other handset instantly.
Call - 23 - MAKING A CONFERENCE CALL A 3-way conference call is a call between you, outside caller(s), and another handset user in your house. You are talking on the phone with an outside caller and you want to involve another handset user in the conversation. During your call with the outside caller, 1. Press . The external caller is automatically being placed on hold. 2. Select or press the target handset number. Wait for the other party to answer your call. 3. Press and hold . You are now on a 3-way conference call. 4. Press to end the conference call. TIP: Auto ConferenceAuto ConferenceAuto ConferenceAuto Conference. You can join an ongoing external call with another handset by pressing . See Activating/Deactivating auto conference on page 33. NOTE:A 3-way conference call requires 2 handsets that share the same base unit. - 24 - Text and Numbers You can enter text and numbers for handset name, phonebook records, and others menu items. ENTERING TEXT AND NUMBERS 1. Find the key with the character you want. 2. Press it as many times as needed for the character you want. I I I Input nput nput nput tabletabletabletable KeyKeyKeyKey Characters (Upper case)Characters (Upper case)Characters (Upper case)Characters (Upper case) KeyKeyKeyKey Characters (Lower case)Characters (Lower case)Characters (Lower case)Characters (Lower case) 0 . 0 , / : ; “ ; ! ¡ ? ¿ * + - % \ ^ ~ | 0 . 0 , / : ; “ ; ! ¡ ? ¿ * + - % \ ^ ~ | 1 [Sp] 1 @ _ # = < > ( ) & ¤ £ $ ¥ [ ] { } ° § … 1 [Sp] 1 @ _ # = < > ( ) & ¤ £ $ ¥ [ ] { } ° § …2 A B C 2 À Â Æ Á Ã Ă Ä Å Ą Ç ĆČ 2 a b c 2 à â Æ á ã ă ä å ą ç ćč3 D E F 3 ĎĐĖĚ È É Ê Ë Ę∆Φ 3 d e f 3 ďđėě è é ê ë ę∆Φ4 G H I 4 Ğ Í Ì Î Ï İΓ 4 g h i 4 ğ í ì î ï I Γ5 J K L 5 Λ Ł ĹĽ 5 j k l 5 Λ ł ĺľ6 M N O 6 Ñ ŇŃ Ó Ô Õ Ö Ő 6 m n o 6 ñ ňń ó ô õ ö ő7 P Q R S 7 ŘŞ Š ŚβΠΘΣ 7 p q r s 7 řş š śβΠΘΣ8 T U V 8 ŢŤ Ù Ú Û Ü ŮǙŰ 8 t u v 8 ţť ù ú û ü ůǚűµ9 W X Y Z 9 Ý Ž ŹŻſ Ø ΩΞΨ 9 w x y z 9 ý ž źż ƒ ø ΩΞΨ TIP: Change CaseChange CaseChange CaseChange Case. Press during editing, and the next letter you enter will be in the alternate case. TIP: EditingEditingEditingEditing. Use BACK to delete and or to move the cursor.
- 25 - Phonebook Your phone has a phonebook that can store up to 100 records. You can access the phonebook from your handset. Each record can have a name up to 14 characters long and a number up to 24 digits long. VIEWING THE PHONEBOOK 1. Press . 2. Select the contact you want to view. 3. Press to view the details of a record (name, number, VIP melody). Searching a record You can search the phonebook by scrolling or by searching the first character. Searching by scrolling 1. While in the phonebook, press or to scroll. Searching by the first character 1. While in the phonebook, press the digit key that contains the character you want to search by. During a call You can access the phonebook and use the number during a call. 1. Press and hold during a call OROROROR Press OK. Select PhonebookPhonebookPhonebookPhonebook. Press OK. 2. Select the contact you want. 3. Press OK. The number displays on the screen and is sent out. TIP: Use or to navigate the menus. TIP: Options Options Options Options MMMMenu.enu.enu.enu. While viewing the phonebook, you can press OKto access the phonebook options menu. Phonebook - 26 - CALLING FROM THE PHONEBOOK See Calling from the phonebook on page 18. ADDING A RECORD 1. Press . 2. Select Phonebook Phonebook Phonebook Phonebook  New entryNew entryNew entryNew entry. Press OK. 3. Enter the name. Press OK. 4. Enter the number. 5. Press OK to confirm. Your new record is saved. EDITING A RECORD 1. Press . 2. Select Phonebook Phonebook Phonebook Phonebook  E E E Edit entrydit entrydit entrydit entry. Press OK. 3. Select the contact you want to edit. Press OK. 4. Edit the name if necessary. Press OK. 5. Edit the number if necessary. Press OK to confirm. The record is saved. TIP: EditingEditingEditingEditing. Use BACK to delete and or to move the cursor. NOTE: Memory FullMemory FullMemory FullMemory Full. If your phonebook is full, the handset displays anotification message. Delete some records before adding new ones. NOTE: Text and Number EditingText and Number EditingText and Number EditingText and Number Editing. See Text and Numbers on page 24. NOTE: Duplicate Duplicate Duplicate Duplicate RecordRecordRecordRecord. Contacts with identical number cannot be saved. TIP: PausePausePausePause. Press and hold to insert a pause.
Phonebook - 27 - SETTING VIP MELODIES You can assign different ringer melodies for each phonebook contacts. Your phone will ring the selected melody when the caller ID matches the number in your phonebook. 1. Press . 2. Select PhonebookPhonebookPhonebookPhonebook  Select melodySelect melodySelect melodySelect melody. Press OK. 3. Select the contact you want. Press OK. The current melody is displayed. 4. Select a ring melody using and . Press OK. The setting is saved. DELETING A RECORD 1. Press .... 2. Select Phonebook Phonebook Phonebook Phonebook  DeleteDeleteDeleteDelete. Press OK. 3. Select the contact you want to delete. Press OK. The handset displays a confirmation request. 4. Press OK to confirm. The record is deleted. DELETING ALL RECORDS 1. Press . 2. Select Phonebook Phonebook Phonebook Phonebook  DDDDelete elete elete elete aaaallllllll. Press OK. The handset displays a confirmation request. 3. Press OK to confirm. All records are deleted. USING QUICK DIAL Phonebook records can be programmed to a quick dial key (digit keys 1- 9). NOTE: If network service shortcuts are enabled, keys 1 and 2 cannot be used as quick dial shortcut keys. See Network Services on page 38. Phonebook - 28 - Assigning a quick dial key 1. Press . 2. Select Phonebook Phonebook Phonebook Phonebook  Direct memorDirect memorDirect memorDirect memoryyyy. Press OK. 3. Select an available key from the list. Press OK. 4. Select the contact you want. Press OK. The setting is saved. Making a call 1. Press and hold an assigned quick dial key during standby. The programmed number is dialed out. Editing a quick dial key 1. Press . 2. Select Phonebook Phonebook Phonebook Phonebook  Direct memory Direct memory Direct memory Direct memory. Press OK. 3. Select the quick dial key you want to change. Press OK. 4. Select CCCChangehangehangehange. Press OK. 5. Select a new contact. Press OK. The setting is saved Cancelling a quick dial key 1. Press . 2. Select Phonebook Phonebook Phonebook Phonebook  DDDDirect memoirect memoirect memoirect memoryryryry. Press OK. 3. Select the quick dial key you want to cancel. Press OK. 4. Select DDDDeleteeleteeleteelete to cancel the quick dial key. Press OK. The handset displays a confirmation request. 5. Press OK to confirm. The quick dial key is cancelled.
- 29 - Call Log and Redial List The call log stores the call history of all incoming (missed or received), and the redial list stores call history of dialed calls. CallsCallsCallsCalls What is this?What is this?What is this?What is this? Stored recordsStored recordsStored recordsStored records Incoming Calls that you received. 50 Dialed Calls that you have made. 10 The incoming call history includes the caller name, number, call time and date. The dialed call history includes the name and number called. VIEWING THE CALL RECORDS 1. Press . (For CID model) Press . Select Call ListCall ListCall ListCall List, and then press OK to enter the incoming call log. (For ANSWERING MACHINE model) OROROROR Press to enter the dialed call log. 2. Select the record you want to view. Press for more information. MAKING A CALL Returning a call To call from the incoming call log, see Calling from the call log on page 18. Redialing a call To call from the redial list, see Calling from the redial list on page 18. TIP: Use or to navigate the menus. Call Log and Redial List - 30 - SAVING A CALL RECORD TO YOUR PHONEBOOK 1. Enter the call log or redial list. 2. Select the record you want while browsing the log. Press OK. 3. Select CCCCopy to phbkopy to phbkopy to phbkopy to phbk. Press OK. 4. Enter and edit the name if necessary. Press OK. 5. Enter and edit the number if necessary. Press OK. The record is saved. DELETING A CALL RECORD 1. Enter the call log or redial list. 2. Select the record you want while browsing the log. Press OK. 3. Select DeleteDeleteDeleteDelete. Press OK. The handset displays a confirmation request. 4. Press OK to confirm. The record is deleted. DELETING ALL CALL RECORDS 1. Enter the call log or redial list. 2. Press OK to enter the options menu while browsing the log. 3. Select Delete Delete Delete Delete aaaallllllll. Press OK. The handset displays a confirmation request. 4. Press OK to confirm. All records are deleted.
- 31 - Custom Options Make this your phone – change the look and sound of the handset to suit your needs and tastes. PERSONALIZING YOUR PHONE’S DISPLAY Naming your handset Each handset can have its own name. It is displayed on the screen in standby. 1. Press . 2. Select PPPPersonal setersonal setersonal setersonal set  H H H Handsetandsetandsetandset nnnnameameameame. Press OK. 3. Enter or edit the name. Use BACK to make corrections. 4. Press OK to confirm. The setting is saved. Setting the display language This This This This feature feature feature feature only only only only applies to model(s) with multipleapplies to model(s) with multipleapplies to model(s) with multipleapplies to model(s) with multiple----language support.language support.language support.language support. 1. Press . 2. Select PPPPersonal setersonal setersonal setersonal set  Language Language Language Language. Press OK. 3. Select the new setting. Press OK. The setting is saved. Setting the screen contrast level 1. Press . 2. Select PPPPersonal set ersonal set ersonal set ersonal set  CCCContrastontrastontrastontrast. Press OK. 3. Select the new setting. Press OK. The setting is saved. Custom Options - 32 - PERSONALIZING YOUR PHONE’S SOUNDS Setting your handset’s ringer melody You can choose from 12 different ringer melodies. 1. Press . 2. Select PPPPersonal setersonal setersonal setersonal set  Handset Handset Handset Handset tones tones tones tones  RRRRing ing ing ing melodymelodymelodymelody. Press OK. 3. Select the new setting. Press OK. The setting is saved. Setting your handset’s ringer volume There are 6 ringer volume levels (including ringer off) and a progressive setting. 1. Press . 2. Select PPPPersonal setersonal setersonal setersonal set  Handset tones Handset tones Handset tones Handset tones  RRRRing ing ing ing vvvvolumeolumeolumeolume. Press OK. 3. Select the new setting. Press OK. The setting is saved. Setting the key tone Key tone is the sound you hear when you press a key on your handset. 1. Press . 2. Select PPPPersonal setersonal setersonal setersonal set  Handset tones Handset tones Handset tones Handset tones  Key Key Key Key beepbeepbeepbeep. Press OK. 3. Select the new setting. Press OK. The setting is saved. Enhancing the audio quality Your phone has an equalizer just like your home stereo system. The equalizer improves the earpiece’s sound quality. 1. Press . 2. Select AAAAdvanced setdvanced setdvanced setdvanced set  XHD soundXHD soundXHD soundXHD sound. . . . Press OK. 3. Select the new setting. Press OK. The setting is saved. During a call 1. Press OK to enter the options menu. The handset displays the XHD setting you can change to. 2. Press OK to change the setting. The setting is saved.
- 33 - Calling Features Your phone supports a number of call-related features to help you handle and manage your calls. AUTO HANG UP Auto hang up allows you to end a call by placing the handset on the base or charging cradle without pressing any key. Activating/Deactivating auto hang up 1. Press . 2. Select PPPPersonal set ersonal set ersonal set ersonal set  Auto hang up Auto hang up Auto hang up Auto hang up. Press OK. 3. Select the new setting. Press OK. The setting is saved. AUTO CONFERENCE Auto conference lets you join an external call with another handset by simply pressing . Activating/Deactivating auto conference 1. Press . 2. Select AAAAdvanced setdvanced setdvanced setdvanced set  CCCConference. onference. onference. onference. Press OK. 3. Select the new setting. Press OK. The setting is saved. DIAL MODE Dial mode is the telephone signal used in your country. Your phone supports tone (DTMF) and pulse (rotary) dialing. Your phone shall already be set up for use in your country. For details, consult your service provider. Setting the dial mode 1. Press . 2. Select AAAAdvanced setdvanced setdvanced setdvanced set  Dial Dial Dial Dial mmmmodeodeodeode. Press OK. 3. Select the new setting. Press OK. The setting is saved. Calling Features - 34 - RECALL SELECTION Recall is a signal that needs to be sent to the network when making or answering a second call. Your phone shall already be set up for use in your country. For details, consult your service provider. Setting the recall duration 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced setsetsetset  Recall Recall Recall Recall time time time time. Press OK. 3. Select the new setting. Press OK. The setting is saved. CALL BARRING Call barring allows you to block selected numbers from dialing out. Activating/deactivating call barring 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced set set set set  Call barri Call barri Call barri Call barringngngng. Press OK. 3. Enter the system PIN. Press OK. 4. Select MMMModeodeodeode. Press OK. 5. Select the new setting. Go to step 6 if you selected OnOnOnOn or step 7 if you selected OffOffOffOff. 6. Enter the barred number (if it is not set previously). 7. Press OK. The setting is saved. TIP: Temporary ToneTemporary ToneTemporary ToneTemporary Tone. If your phone is in pulse dialing, press and hold during a call for temporary tone mode. ‘d’ displays. Digits entered after ‘d’ are sent out as tone signal (for this call only).
Calling Features - 35 - Setting barred numbers You can set up to 4 numbers of 1 – 4 digits long. Outgoing calls starting with one of the 4 programmed numbers will be blocked from dialing out. 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced set set set set  Call barring Call barring Call barring Call barring. Press OK. 3. Enter the system PIN. Press OK. 4. Select NumbNumbNumbNumber er er er  Number 1 (2, 3, 4) Number 1 (2, 3, 4) Number 1 (2, 3, 4) Number 1 (2, 3, 4). Press OK. 5. Enter the number you want to block. Press OK. The setting is saved. AREA CODE MANAGEMENT This This This This featurefeaturefeaturefeature only applies to model(s) with area code support. only applies to model(s) with area code support. only applies to model(s) with area code support. only applies to model(s) with area code support. This feature automatically removes the area code of an incoming call. You can define an area code (up to 6 digits) you want to remove. The phone number will be saved in the call log without the area code. Activating area code removal 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced setsetsetset  Area Area Area Area ccccodeodeodeode. Press OK. 3. Enter the area code. Press OK. The setting is saved. Deactivating area code removal 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced setsetsetset  Area Area Area Area ccccodeodeodeode. Press OK. 3. Use BACK to delete all the digits. Press OK. The setting is saved. Calling Features - 36 - CARRIER CODE This This This This featurefeaturefeaturefeature only applies to model(s) with carrier code support. only applies to model(s) with carrier code support. only applies to model(s) with carrier code support. only applies to model(s) with carrier code support. For some telephone service providers, you may need to add the carrier code when making a call outside of your local area. The area code feature automatically helps you decide if the carrier code is needed when you are returning a call from the incoming call log. You only have to program the carrier code of your service provider, and your phone will do the rest for you. 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced setsetsetset  CCCCarrier arrier arrier arrier ccccodeodeodeode. Press OK. 3. Enter the carrier code number. Press OK. The setting is saved. AUTO PREFIX TTTThis his his his featurefeaturefeaturefeature only applies to model(s) with auto prefix support. only applies to model(s) with auto prefix support. only applies to model(s) with auto prefix support. only applies to model(s) with auto prefix support. The auto prefix feature checks and formats your outgoing call number before it is dialed out. If the first few digits of the number match the detect number you set in the menu, they will be replaced by the prefix number you set in the menu. For example, you set the detect numberdetect numberdetect numberdetect number as 604604604604 and prefix numberprefix numberprefix numberprefix number as 1250125012501250. When you have dialed out a number such as 6043338888604333888860433388886043338888, your phone will change the number to 12503338888125033388881250333888812503338888 when it dials out. NOTE: Area Code. Area Code. Area Code. Area Code. Remember to program your local area code in the area code menu. NOTE: Carrier Code. Carrier Code. Carrier Code. Carrier Code. It is a 2 or 3-digit code that represents a service provider. Consult your service provider to find out its code. NOTE: The detect number can be up to 5 digits; the prefix number can be up to 10 digits.
Calling Features - 37 - 1. Press . 2. Select AAAAdvanced dvanced dvanced dvanced setsetsetset  AAAAuto prefixuto prefixuto prefixuto prefix. Press OK. 3. Enter the Detect number. Press OK. 4. Enter the Prefix number. (To enter a pause, press and hold .) Press OK. The setting is saved. FIRST RING This feature only applies to model(s) with first ring support. This feature only applies to model(s) with first ring support. This feature only applies to model(s) with first ring support. This feature only applies to model(s) with first ring support. This feature controls the first ring sent before the caller ID. Your phone automatically detects for CID service. If CID service is detected, the phone will change the first ring status to off. Therefore, you will not hear the first ring that is sent before the caller ID. This status will not change even if you have unsubscribed for caller ID service. Activating/deactivating first ring You can manually change the first ring setting. After changing it manually, your phone will not update the first ring status automatically based on your subscription to caller ID service (until you reset the system). 1. Press . 2. Select Advanced setAdvanced setAdvanced setAdvanced set  First ring. First ring. First ring. First ring. Press OK. 3. Select the new setting. Press OK. The setting is saved. NOTE: Reset First Ring Status.Reset First Ring Status.Reset First Ring Status.Reset First Ring Status. To reset the first ring status, you can reset the system from the Reset menu. See Restoring default settings on page 48. NOTE: Dialed Number.Dialed Number.Dialed Number.Dialed Number. If the dialed number starts with , # or P, the handset will not do any reformatting. NOTE: Empty Detect Number.Empty Detect Number.Empty Detect Number.Empty Detect Number. If the user only sets the prefix number and leaves the detect number empty, the prefix number will be added to all outgoing calls. - 38 - Network Services All network services are provided by your service provider. Consult from your service provide about the subscription and the activation/deactivation codes for each service. CALL FORWARD This feature lets you forward your calls to another number. There are a few options: CCCCall forwardall forwardall forwardall forward:::: forward all incoming calls. CCCCallfwd busyallfwd busyallfwd busyallfwd busy: : : : forward calls only when the line is busy.... CCCCallfwd unansallfwd unansallfwd unansallfwd unans: : : : forward calls only when they are not answered. Activating call forward 1. Press . 2. Select NNNNet serviceet serviceet serviceet service.... Press OK. 3. Select the call forward options you want. Press OK to confirm. 4. Select ActivateActivateActivateActivate. Press OK. 5. Enter the number you want to forward your calls to. Press OK. A call is made to the service centre. Deactivating call forward 1. Press . 2. Select NNNNet serviceet serviceet serviceet service.... Press OK. 3. Select the call forward options you want. Press OK to confirm. 4. Select DeactivateDeactivateDeactivateDeactivate. Press OK. A call is made to the service centre. Editing the activation/deactivation codes You can make changes to the prefix and suffix to the call forward codes. TIP: Incorrect codesIncorrect codesIncorrect codesIncorrect codes. Network services may not work if the incorrect activation and/or deactivation codes are entered.
Network Services - 39 - 1. Press . 2. Select NNNNet serviceet serviceet serviceet service.... Press OK. 3. Select the call forward options you want. Press OK to confirm. 4. Select Change codesChange codesChange codesChange codes. Press OK. 5. Select Activation Activation Activation Activation  Prefix (Suffix) Prefix (Suffix) Prefix (Suffix) Prefix (Suffix). Press OK OR Select DeactiDeactiDeactiDeactivationvationvationvation. Press OK. 6. Enter or edit the code. Press OK. The setting is saved. VOICEMAIL You will see an envelope icon on your handset when there is a voicemail waiting in your mailbox. When all the voicemail record is cleared from the call log, the envelope icon will turn off. Retrieving voicemail(s) You can make a call to the voicemail service centre to retrieve your voicemail(s). Your phone supports 2 voicemail service numbers. 1. Press . 2. Select NNNNet serviceet serviceet serviceet service. Press OK. 3. Select the voicemail service you want. Press OK. 4. Select CallCallCallCall. Press OK. A call is made to the service centre. Editing the voicemail service numbers 1. Press . 2. Select NNNNet serviceet serviceet serviceet service. Press OK. 3. Select the voicemail service you want. Press OK. 4. Select SettingSettingSettingSettingssss. Press OK. 5. Enter or edit the voicemail number. Press OK. The setting is saved. TIP: VoicemailVoicemailVoicemailVoicemail 11 11 ShortcutShortcut ShortcutShortcut. Press and hold 1 during standby to make a call to the voicemail 1 service centre directly. Network Services - 40 - INFO CENTRE Your phone supports 2 info centre numbers. Calling the info centre 1. Press . 2. Select Net servNet servNet servNet serviceiceiceice. Press OK. 3. Select the info centre you want. Press OK. 4. Select CallCallCallCall. Press OK. A call is made to the info centre. Editing the info centre numbers 1. Press . 2. Select NNNNet serviceet serviceet serviceet service. Press OK. 3. Select the info centre you want. Press OK. 4. Select SettingSettingSettingSettingssss. Press OK. 5. Enter or edit the number. Press OK. The setting is saved. CALL RETURN The call return service allows you to check who called you last. Calling the call return service centre 1. Press . 2. Select Net service Net service Net service Net service  Call return Call return Call return Call return  Call Call Call Call. Press OK. A call is made to the service centre. Editing the service centre number 1. Press . 2. Select Net service Net service Net service Net service  Call return Call return Call return Call return  Setting Setting Setting Settingssss. Press OK. 3. Enter or edit the number. Press OK. The setting is saved. TIP: Info 1 ShortcutInfo 1 ShortcutInfo 1 ShortcutInfo 1 Shortcut. Press and hold 2 during standby to make a call to the info 1 centre directly.
Network Services - 41 - CANCEL CALL BACK The call back service notifies you when a party you have tried to call becomes available. After activating this service from your service provider, you can choose to cancel it from the menu. Cancelling call back 1. Press . 2. Select Net service Net service Net service Net service  Cancel callback Cancel callback Cancel callback Cancel callback  Call Call Call Call. Press OK. A call is made to the service centre to cancel the call back option. Editing the cancel call back service number 1. Press . 2. Select Net service Net service Net service Net service  Cancel callback Cancel callback Cancel callback Cancel callback  Setting Setting Setting Settingssss. Press OK. 3. Enter or edit the number. Press OK. The setting is saved. WITHHOLDING ID This feature enables you to suppress your Caller ID to the caller. Activating withhold ID 1. Press . 2. Select Net service Net service Net service Net service  Withhold ID Withhold ID Withhold ID Withhold ID  Activate Activate Activate Activate. Press OK. The withhold ID code is dialed out. 3. Enter the number you want to call. The number is dialed out and your information is withheld from the other party. Editing the withhold ID code 1. Press . 2. Select Net service Net service Net service Net service  Withhold ID Withhold ID Withhold ID Withhold ID  Setting Setting Setting Settingssss. Press OK. 3. Enter or edit the number. Press OK. The setting is saved. - 42 - Extra Features Discover and explore the additional features your phone offers! Find out how these features can benefit you and help you make the most of your phone. ALARM CLOCK You can use your phone as an alarm clock to wake you up. You can set the alarm to ring once or daily. Setting the alarm 1. Press . 2. Select CCCClock & lock & lock & lock & alarmalarmalarmalarm  AAAAlarm. larm. larm. larm. Press OK. 3. Select OOOOnnnn onceonceonceonce or OOOOn dailyn dailyn dailyn daily. Press OK. 4. Enter the alarm time. 5. Press OK. The alarm is set and the icon displays. Turning off the alarm When the alarm rings 1. Press or OK to turn off the alarm. Pressing other keys cannot stop the alarm. Before the alarm rings 1. Press . 2. Select CCCClock & lock & lock & lock & alarmalarmalarmalarm  AAAAlarm. larm. larm. larm. Press OK. 3. Select OOOOffffffff. Press OK. The setting is saved. NOTE: If you do not press any key after the alarm clock rings for 1 minute, it will turn off automatically. TIP: You can set the time format to 12-hour or 24-hour. See Setting thedate and time format on page 15.
Extra Features - 43 - Setting the alarm melody 1. Press . 2. Select CCCClock lock lock lock & & & & alarmalarmalarmalarm  AAAAlarm tone. larm tone. larm tone. larm tone. Press OK. 3. Select the new setting. Press OK. The setting is saved. EASY CALL Easy call allows you to dial out a programmed number by pressing any handset key (except BACK.) Activating easy call 1. Press . 2. Select Advanced Advanced Advanced Advanced setsetsetset  EEEEasy callasy callasy callasy call  Mode Mode Mode Mode. . . . Press OK. 3. Select OOOOnnnn. Press OK. 4. Enter the easy call number (if it is not set previously). Press OK. The setting is saved. Setting the easy call number 1. Press . 2. Select Advanced setAdvanced setAdvanced setAdvanced set  Easy call Easy call Easy call Easy call  Number. Number. Number. Number. Press OK. 3. Enter the easy call number. Press OK. The setting is saved. Deactivating easy call 1. Press BACK during standby. The easy call menu displays. 2. Select OOOOffffffff. Press OK. The setting is saved. NOTE: Alarm Volume. Alarm Volume. Alarm Volume. Alarm Volume. The alarm volume is set to the same level as the ringer volume. If the ringer is off, the alarm volume is set to level 1. Extra Features - 44 - KEYPAD LOCK You can lock the keypad to prevent accidental presses on the handset while you are carrying it around. Locking the keypad 1. Press and hold during standby. The keypad is locked. Key Key Key Key llllockedockedockedocked is displayed. Unlocking the keypad 1. Press and hold . The keypad is unlocked. MISSING HANDSET(S) 1. Press on the base unit. All the handsets connected to this base unit ring. 2. Press on the base unit again to stop paging. All the handsets stop ringing OROROROR Press any key on the handset to stop the paging for that handset. NOTE: CallsCallsCallsCalls. You will notwill notwill notwill not be able to make any calls including emergency callsemergency callsemergency callsemergency calls when the keypad is locked. You can still answer incoming calls. The keypad will be unlocked during the call, and then it will be re-locked automatically after you finish the call.
- 45 - The System REGISTERING ADDITIONAL HANDSET(S) Registration allows communication between your base unit and handset(s). If your handset is not registered, you will not be able to make a call or use some of the functions and features on the phone. 1. Press on the base unit for 3 seconds. 2. Press on the handset. 3. Select Advanced set Advanced set Advanced set Advanced set  Regist Regist Regist Registrationrationrationration. Press OK. 4. Enter the system PIN (Pre-set: 0000). Use BACK to make corrections. 5. Press OK. Your handset starts searching for the base. Registration shall be completed within 60 seconds. The base automatically assigns a handset number to the handset. DELETING A HANDSET Use one handset to de-register another handset that shares the same base unit. 1. Press . 2. Select AAAAdvanced setdvanced setdvanced setdvanced set  UUUUnregisternregisternregisternregister. Press OK. 3. Enter the system PIN. Use BACK to make corrections. 4. Press OK. Select the handset (number) you want to delete. 5. Press OK. The handset is deleted. NOTE: Your base can register up to 5 handsets. After registering 5handsets, your base unit registration memory is full. If you attempt to register an additional handset, registration will not be successful. TIP: Handset NumberHandset NumberHandset NumberHandset Number. The handset number displays beside the handset name during standby. The System - 46 - CHANGING YOUR PIN The system PIN is used for registration and protecting access rights to some of the menus and remote access to the ANSWERING MACHINE. The pre-set PIN is 0000. You can personalize your PIN for greater security. 1. Press . 2. Select AAAAdvanced setdvanced setdvanced setdvanced set  Change PIN Change PIN Change PIN Change PIN. Press OK. 3. Enter the system PIN. Use BACK to make corrections. 4. Press OK to confirm the system PIN. 5. Enter the new system PIN. Press OK. 6. Enter the new system PIN again for verification. Press OK. The setting is saved. CHANGING THE COUNTRY SETTING This feature This feature This feature This feature only appliesonly appliesonly appliesonly applies to model(s) with multiple to model(s) with multiple to model(s) with multiple to model(s) with multiple----country support.country support.country support.country support. You can change the country setting of your phone when you are using it in another country. If your handset displays WWWWelcomeelcomeelcomeelcome, refer to Greeting you with “Welcome” on page 14. 1. Press . 2. Select AAAAdvanced set dvanced set dvanced set dvanced set  CCCCountryountryountryountry. Press OK. 3. Select the new setting. Press OK. The setting is saved. NOTE: Forgotten PINForgotten PINForgotten PINForgotten PIN. Write down your PIN and save it for future use. If you have forgotten the PIN, reset your phone and your PIN code will be restored to the factory pre-set PIN (0000). To reset your phone, see Restoring default settings on page 47.
The System - 47 - RESTORING DEFAULT SETTINGS You can reset your phone settings to the original factory settings. 1. Press . 2. Select AAAAdvanced setdvanced setdvanced setdvanced set  Reset Reset Reset Reset. Press OK. The handset displays a confirmation request. 3. Press OK to confirm. All settings have been reset. To see a list of default setting, see Default (pre-programmed) settings on page 56. NOTE: After reset, your handset’s power switches off. It will switch back on in a few seconds after updating all the settings. All handsets return to the Welcome screen after reset. - 48 - The Answering Machine Once switched on, your answering machine is ready to be used. By default, your answering machine is set to Answer and Record mode. You can also access the machine remotely. 7-SEGMENT DISPLAY Your answering machine comes with a 7-segment display to show you the number of messages you have and other visual messages about its operation. -- Memory full 00AA Remote access Recording The 2-digit number shows: - The volume level, or - The message number (blink for new messages) SWITCHING THE ANSWERING MACHINE ON/OFF From the base 1. Press during standby. From the handset 1. Press . 2. Select AAAAns machinens machinens machinens machine  AAAAnsnsnsnswerwerwerwer on/off on/off on/off on/off. Press OK. 3. Select the new setting. Press OK. The setting is saved. Once switched on, your answering machine will answer incoming calls after a certain number of rings depending on the ring delay setting. See Setting the ring delay on page 54.
The Answering Machine - 49 - SETTING THE ANSWERING MACHINE LANGUAGE This This This This featurefeaturefeaturefeature only appl only appl only appl only applies to model(s) with multipleies to model(s) with multipleies to model(s) with multipleies to model(s) with multiple----language support.language support.language support.language support. The answering machine language is the language for the pre-recorded OGM and voice prompt instructions (for models that support voice prompts) announced by the answering machine. 1. Press . 2. Select AAAAnsnsnsns machine machine machine machine  AAAAnsnsnsns settingssettingssettingssettings  VVVVoiceoiceoiceoice llllanganganganguageuageuageuage. Press OK. 3. Select the new setting. Press OK. The setting is saved. SETTING THE ANSWER MODE Your answering machine has 2 answer modes. Answer and Record mode allows the caller to leave a message for you. Answer Only mode does not allow the caller to leave a message. 1. Press . 2. Select AAAAns machinens machinens machinens machine  AAAAnswer modenswer modenswer modenswer mode. Press OK. 3. Select the new setting. Press OK. The setting is saved. OUTGOING MESSAGES (OGM) The OGM is the message your caller hears when the answering machine picks up the call. Your answering machine comes with 2 pre-recorded OGM: Answer and Record mode and Answer Only mode. NOTE: Memory Full.Memory Full.Memory Full.Memory Full. Answer and Record mode cannot be used if your answering machine’s memory is full. The Answering Machine - 50 - Recording an OGM The maximum length of the OGM is 60 seconds. After recording, your new OGM will replace the old one. 1. Press . 2. Select AAAAns machine ns machine ns machine ns machine  RRRRecord OGMecord OGMecord OGMecord OGM. Press OK. 3. Select AAAAnswer&record (nswer&record (nswer&record (nswer&record (AAAAnswer only)nswer only)nswer only)nswer only). Press OK. 4. Select RRRRecord OGMecord OGMecord OGMecord OGM. Press OK. 5. Start recording after the beep. 6. Press OK to stop recording or recording will stop after 60 seconds. The recorded OGM will play back automatically for review. Listening to the current OGM 1. Press . 2. Select AAAAns machinens machinens machinens machine  RRRRecord OGM ecord OGM ecord OGM ecord OGM Press OK. 3. Select AAAAnswer&record (nswer&record (nswer&record (nswer&record (AAAAnswer only)nswer only)nswer only)nswer only). Press OK. 4. Select PPPPlaylaylaylay. Press OK. The handset plays the current OGM. Deleting an OGM 1. Press . 2. Select AAAAns machinens machinens machinens machine  RRRRecord OGM ecord OGM ecord OGM ecord OGM Press OK. 3. Select AAAAnswer&record (nswer&record (nswer&record (nswer&record (AAAAnswer only)nswer only)nswer only)nswer only). Press OK. 4. Select DDDDeleteeleteeleteelete. Press OK. The handset displays a confirmation request. 5. Press OK to confirm. The pre-recorded OGM is restored. NOTE: The pre-recorded OGM cannot be deleted.TIP: Restore Restore Restore Restore PrePrePrePre----recorded recorded recorded recorded OGM.OGM.OGM.OGM. If you want to restore the pre-recorded OGM, simply delete your current OGM.
The Answering Machine - 51 - INCOMING MESSAGES (ICM) Each message can be up to 2 minutes long. When you have received new messages on your answering machine, the answering machine display will keep flashing the number of new messages received and the handset will display a notification message. If you pick up the phone when the caller is leaving a message, the recording will stop and you can talk to the caller directly. Playing ICM ICM will be played back in the sequence they were recorded. From the base 1. Press . New messages start playing. •Adjust the volume.Adjust the volume.Adjust the volume.Adjust the volume. Press to increase or to decrease the speaker’s volume. •Skip backward.Skip backward.Skip backward.Skip backward. • During message playback, press to replay the message from the beginning. • During the first second of the current message, press to play the previous message. •Skip forward.Skip forward.Skip forward.Skip forward. Press to skip to the next message. •Stop playback.Stop playback.Stop playback.Stop playback. Press . •Delete current message.Delete current message.Delete current message.Delete current message. Press . NOTE: Deleted message(s) cannot be recovered. NOTE: Memory FullMemory FullMemory FullMemory Full. The answering machine automatically switches to answer only mode. Delete some messages to allow room for new messages. The Answering Machine - 52 - From the handset 1. Press . 2. Select AAAAns machinens machinens machinens machine  PPPPlaylaylaylay.... Press OK. New messages start playing. •Stop playback.Stop playback.Stop playback.Stop playback. Press BACK. •Enter options menu.Enter options menu.Enter options menu.Enter options menu. Press OK. •Adjust the volumeAdjust the volumeAdjust the volumeAdjust the volume.... Press to increase or decrease the volume. Deleting an ICM From the base 1. Press during message playback. The current message is deleted. From the handset 1. During message playback, press OK to enter the options menu. 2. Select DDDDeleteeleteeleteelete. Press OK. The current message is deleted. Deleting all old ICM From the base 1. Press and hold during standby. All old messages are permanently deleted. From the handset 1. Press . 2. Select AAAAnnnnssss machinemachinemachinemachine  DDDDelete allelete allelete allelete all. Press OK. The handset displays a confirmation request. 3. Press OK to confirm. All old messages are permanently deleted. NOTE: Deleted message(s) cannot be recovered.
The Answering Machine - 53 - CALL SCREENING Call screening allows you to hear the caller while he is leaving a message. You can then decide if you want to talk to the caller directly. From the base You can use and to adjust the speaker’s volume during call screening. The lowest volume level turns call screening off. From the handset The call screening feature on the handset can be changed from the handset menu. 1. Press on the handset. 2. Select AAAAnnnnssss machinemachinemachinemachine  AAAAns settingsns settingsns settingsns settings  HSHSHSHS screening screening screening screening. Press OK. 3. Select the new setting. Go to step 4 if you selected OnOnOnOn or step 5 if you selected OffOffOffOff. 4. Select the handset you want for screening. 5. Press OK. The setting is saved. During call screening, use and to adjust the screening volume. TIP: HandsetHandsetHandsetHandset Call Screening.Call Screening. Call Screening.Call Screening. Your handset automatically turns on the speaker for handset screening. To listen from the earpiece, press to turn off the speaker. NOTE: The call screening on/off setting cannot be changed during ICM recording. The Answering Machine - 54 - MESSAGE ALERT Message alert gives you an indication that the answering machine has new message(s). You will see the number of new messages flashing on the base, and you will also see the icon flashing and a notification message on the handset. SETTING THE RING DELAY Ring delay is the number of times your phone will ring before the answering machine picks up the call. This setting only applies when your answering machine is switched on. You can change this setting from 3 – 8 rings or economy. 1. Press . 2. Select AAAAnsnsnsns machine machine machine machine  AAAAns settingsns settingsns settingsns settings  RRRRing delaying delaying delaying delay. Press OK. 3. Select the new setting. Press OK. The setting is saved. REMOTE ACCESS You can operate your answering machine when you are away from home by calling your phone from a touch tone phone and entering your 4-digit PIN code. Activating/deactivating remote access You can allow or block remote access to your answering machine. 1. Press . 2. Select AAAAns machinens machinens machinens machine  AAAAns settingsns settingsns settingsns settings  RRRRemote accessemote accessemote accessemote access. Press OK. 3. Select the new setting. Press OK. The setting is saved. NOTE: The remote access PIN code is the same as your system PIN. To change your PIN, see Changing your PIN on page 46. TIP: EconomyEconomyEconomyEconomy. This is a cost effective way to manage your messages when accessing your answering machine remotely. When economy is selected, your answering machine will pick up the call after 3 rings if you have new messages or 5 rings if you do not have any messages.
The Answering Machine - 55 - Accessing your answering machine remotely 1. Make a call to your home number from a touch tone phone. 2. Press when the outgoing message starts playing. 3. Enter your PIN code. You now have access to your answering machine, and new message(s) starts playing. 4. Press a key to carry out a function. See the Remote access commands table below for a list of available functions. Remote access commands KeyKeyKeyKey FunctionFunctionFunctionFunction 1 Repeat current or play previous message 2 Play messages 3 Skip to next message 6 Delete current message 7 Switch answering machine on (not available during playback) 8 Stop message playback 9 Switch answering machine off (not available during playback) NOTE:Your phone will hang up automatically if no key is pressed for 8 seconds. NOTE: You have 2 tries to enter the correct PIN code before your phone hangs up. - 56 - Appendix DEFAULT (PRE-PROGRAMMED) SETTINGS General SettingGeneral SettingGeneral SettingGeneral Setting Language Handset Name Date Time Date Format Time Format Alarm Network Services Backlight Contrast Auto Hang Up Conference Recall Time Dial Mode Easy Call Area Code Carrier Code Auto Prefix First Ring Russian CID Sounds SettingSounds SettingSounds SettingSounds Setting Handset Ring Melody Handset Ring Volume Alarm Tone Handset Key Beep Receiver Volume XHD Sound Call Log SettingCall Log SettingCall Log SettingCall Log Setting Incoming Call Log Unchanged Dialed Call Log Unchanged System SettingSystem SettingSystem SettingSystem Setting Country PIN Code 0000 Answering Machine SettingAnswering Machine SettingAnswering Machine SettingAnswering Machine Setting Answer Machine Status Voice Language Base Call Screening Handset Call Screening Message Alert Speaker Volume Remote Access
Appendix - 57 - TECHNICAL DATA General telephone features •Caller name & number identification •9 phonebook memories with direct access •Conference call and voicemails •Intercom Battery •2 x AAA NiMH Rechargeable 750mAh batteries Weight and dimensions •Handset: xxx grams A x B x C mm (H x D x W) •Base: xxx grams A x B x C mm (H x D x W) Temperature range •Operation: 0°C to +46°C •Storage: -25°C to +70°C Relative humidity •Operation: Up to 95% at 40°C •Storage: Up to 95% at 40°C Appendix - 58 - FREQUENTLY ASKED QUESTIONS www.philips.com/support Problem(s)Problem(s)Problem(s)Problem(s) Tip(s)Tip(s)Tip(s)Tip(s) No dialing tone •Check your phone connections. •The handset may be out of range. Move closer. Signal icon flashing •The handset may be out of range. Move closer. •If the handset displays UnregisteredUnregisteredUnregisteredUnregistered, register the handset. See page 15. Registration fails continuously •Your base memory may be full. Delete an un-used handset and try again. See page 45. No parking tone •The handset may not be placed properly on the cradle. Try again. •Charging contacts may be dirty. Disconnect the power supply first and then clean contacts with a damp cloth. Handset on the charger does not charge •Check that the batteries are inserted correctly. •Make sure the handset is placed properly on the charger. The battery icon animates while charging. •Batteries may be defective. Purchase new ones from your dealer. No display •Check that the batteries are charged. •Check the power and phone connections. Bad audio (crackles, echo, etc.) •The handset may be nearly out of range. Move closer to the base. •The phone may be receiving interference from nearby electrical appliances. Move the base. •The phone may be at a location with thick walls. Move the base. Handset does not ring •Check that the handset ringer is turned on. See page 32. Caller ID does not display •Service may not be activated. Check with your service provider. •The caller’s information may be withheld or is unavailable. Cannot make / answer a 2nd call •Service may not be activated. Check with your service provider. •Check that the recall selection is correct. See page 34.
24 Appendix11 Appendix11.1 Equipment approval InformationYour telephone equipment is approved for connection to the public switched telephone network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA.11.2 Notification to the local telephone companyOn the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company.The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. to be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.11.3 Notes• This equipment may not be used on coin service provided by the telephone company.• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.11.4 Rights of the Phone CompanyShould your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must:(1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.11.5 Interference InformationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
25Appendix(1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class b digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems”. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402.Please specify stock number 004-000-00345-4 when ordering copies.11.6 NoiseElectrical pulse noise is present at one time or another. This is most intense during electrical storms. Certain kinds of electrical equipment, such as light dimmers, fluorescent bulbs, motors, fans, etc., also generate pulse noise. Because radio frequencies are susceptible to this, you may on occasion hear pulse noise through the receiver. This is usually only a minor annoyance and should not be interpreted as a defect of the unit.11.7 FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.For hand held operation, this phone has been tested and meets the FCC RF exposure guidelines. For Body-worn operation, use only with the belt clip. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.11.8 Hearing Aid Compatibility (HAC)This telephone system meets FCC and Industry Canada standards for Hearing Aid Compatibility.11.9 PrivacyPrivacy of communications may not be ensured when using this telephone.11.10Additional InformationI.C. Notice
26 Appendix11.11Terminal EquipmentNoteThis equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.NoteThe Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipmentitself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five.11.12Radio EquipmentThe term “IC:” before the radio certification number only signifies that Industry Canada technical specifications RSS-213 and ICES-003 were met. Operation is subject to the following two conditions : (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.11.13Do not attempt to repair or modify this equipmentRepairs to certified equipment should be made by an authorized maintenance facility designated by the supplier.Any repairs or alterations made by the user to the equipment may render the equipment void in product warranty and compliance. This could also void the user’s authority to operate the equipment.11.14 The RBRC® sealThe RBRC® Seal on the nickel metal hydride battery indicates that Philips Royal Electronics is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.The RBRC® program provides a convenient alternative to placing used nickel metal hydride batteries into the trash or municipal waste, which may be illegal in your area.Philips’s participation in RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized Philips product service centers. Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and disposal bans/restrictions in your area. Philips’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.PHILIPS CONSUMER ELECTRONICSP.O. BOX 671539, MARIETTA, GA 30006-0026, USAPhone: 888-744-5477USA Service CenterCanada Service CenterPHILIPS CONSUMER SERVICE DIVISION4977 LEVY STREET, VILLE ST. LURENT, QUEBEC, H4R 2N9, CANADA
© 2007 Koninklijke Philips Electronics N.V.All rights reserved.Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Document order number: 3111 285 xxxxx Printed in PRC

Navigation menu