Asian Express 15018-PPL-B Propel Outdoor Helicopter User Manual
Asian Express Holding Ltd Propel Outdoor Helicopter
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1576376 |
| Application ID | LtE8rsELXyM53yzsDd3hyg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 302.05kB (3775625 bits) |
| Date Submitted | 2011-11-07 00:00:00 |
| Date Available | 2011-11-08 00:00:00 |
| Creation Date | 2011-11-02 05:00:45 |
| Producing Software | Mac OS X 10.5.8 Quartz PDFContext |
| Document Lastmod | 2011-11-02 05:00:45 |
| Document Title | User Manual |
1. Intelligentized IUC system 2. Full scale remote contro. 3. 360° exact directional. 4. Smooth hang performance. 5. Newly designed electricity saving function. 6. Safeguard battery model to prolong the uses life. Please read the instructions carefully before use. (Please read the Notice in details.) Please retain the instructions for future reference. PARTS NAME Blades grip set ,—7 Balance bar Main blade ‘(0 Connect buckle Tail blade ——| Landing gear —— Adapter input jack Indicator light Backward trimme Throttle stick Battery charging jack ASSEMBLE TRANSMITTER Rudder stick Steering trimmer Leflward/Rightward l— F orward/Backward Power switch toggle button 1. Install antenna: Install the antenna in the transmitter by turning it clockwise until finger tight. (Fig. l) 2. Install batteries: Open the cover of battery case, insert 6 batteries (size 1.5V AA) properly followed by polar indicator. (batteries to be purchased). (Fig.2) NOTICE: 1. Install batteries carefully. 2. Do not mix old and new batteries. 3. Do not mix different types of batteries. Using Instructions Of Charging Power Batteries A. Charger with balance charger Turn off the power switch on the helicopter. Insert the charging plug into the socket on the helicopter. The charger LED turns from green to red when in charging mode. The charger LED turns from red to green when charging completed .It charges about 60 minutes and flies above 6 minutes. B. Charging with extra balance charger 1. Plug the DC 10V output pin of the power adapter to the input of charge box, the red LED will light up at the time. 2. Insert the three feet plug of battery to output port of charge box (As follows diagram), and the green LED light up. When the green LED put out, the battery capacity will achieves 100% it shows that the recharging finishes. (Note: When install the batteries to the charge box and the green LED does not change, it means the batteries are full and no need to recharge) NOTICE: A 0 When you are tired of playing, please turn off the power switch on the chopper and on the controller to extend battery’s usage time. 0 Be sure the adapter fit your local electrical power supply. ENVIRONMENT FOR FLIGHT 1. Fly on a sunny day, without wind. 0 Do not fly in extreme temperature. Do not fly in temperature above 113 degrees Fahrenheit /45 degrees centigrade, or below 50 degress Fahrenheit /10 degrees cen ti centigrade. Flying in extreme heat and / of cold will affect performance and may damage the model. 0 Do not fly in strong wind. Windy conditions will limit, or disturb the flying control. In very windy conditions, your helicopter may become lost and / or damaged. 2. Select a large, wide-oper area for flying, and make sure is no obstructions, animals or people nearby. READY TO FLY I. Lay your helicopter onto the ground, turn on the power switch, and the indicator light. 2. Leave the helicopter at least two meters away, while the tail aimed at you. 3. Check that the helicopter be far away from the crowd, animals and other obstructions. NOTICE: A 4. Pull antenna full out of remote control device, make sure the 0 While the indicator ofthc controller is sparkle, joystick at lower place. Turn on the controller's power, and it X2?“ 5m“ mmmufigs l“? °§P°,“’e" works, then you can use it to fly the helicopter. you can 0 Se some memes or n. INDICATOR DESCRIPTION Remote indicator shows: 1 When the remote control to work, the light is lit. 2 In the remote flight, remote control battery voltage is 10 W light appear 510W flash state. When the helicopter is hovering and moving backward, please slowly turn 3 When you switch the remote speed indicator appears when the flash file status. the Forwrd / Backward Fine-turning rightward until it stops moving Aircraft lights: backward. 1 power detection, aircraft lights to flash. 2 When the normal signal is received, the light is flashing slowly. 3 When the aircraft receives no signal lights as always. NOTICE When the helicopter is hovering and moving forward, please slowly turn If the helicopter is rotating in the air uncontrollably, adjust with the rudder trimmer until the helicopter is the Forwrd / Backward Fine-tuming leflward until it stops moving Stable. forward. FLYING PRACTICE After the enough practice, you can attempts following flying practice. 5b \@ “a. (A! $1 5 Steering When the helicopter is rotating to the left, screw the rudder trimmer i " /.‘® slowly to the right until the helicopter is stable. , , Attention“ When the helicopter ascends to 30cm high, it will suffer the “ground effect” and ' its performance will become unstable. Fixed revolves Always go forward and turn left, and exercise flight in a (direction revolve) quadrate pattern, then repeatedly practices to gradual practice flight in a rotundity. Forward When the helicopter is rotating to the right, screw the rudder trimmer slowly to the left until the helicopter is stable. Servo lever adjustment = m. Before flight, be sure that the Forward / Backward Fine-turning on the i] and then turn on the plane switch. After finishing the efficacy of the plane gyro, check if the crossing tilting-tray is horizontal. If is horizontal, you can remove the servo lever and adjust it to a proper length until the Backward swashplate is in the horizontal position then flight begins. Landing at the appoint pace (fixed landing) Fly in a figure of eight shape CONTROL METHOD When you push up the left stick (throttle) the speed of the main rotor blade will increase and the helicopter will go up. l-b= When you push down t e left stick (throttle) the speed of the main rotor blade will decrease and the helicopter will go down. - When the right stick (rudder) is moved to the left the helicopter will rotate to the left. - When the right stick (rudder) is moved to the right the helicopter will rotate to the right. When you push the right control lever (rudder) up wards the helicopter’s nose will point down and it will fly forwaeds. When you push the right control lever ~ (rudder) down wards the helicopter’s nose will rise and it TROUBLE SHOOT AND DEALING WITH PROBLEM CAUSE CHECK THIS 2. Insert batteries into controller 2. Confirm batteries be inserted Controller doesn . . . improperly. according to their pole. 3. Batteries lack of power. 3. Change new batteries instead. 1. You havent operated the controller. 1. Turn controller power switch “ON”. 2. Doesnt turn on controllers power 2. Turn helicopters power switch switch. “ON”. Can not control the helicopter 3. Doesnt wrest antenna into controller 3. Wrest antenna completely and pull completely, or antenna isnt fully it out. pulled out. 4. You play the helicopter in strong 4. Do not play the chopper in winds, winds weather. which can confuse your control. Helicopter 1. Main rotor blades rotate too slowly. 1. Pull up the throttle stick. can not rise 2. Doesnt fully charge helicopters battery. 2. Full charge helicopter battery. (see instruction above) Helicopter You loose the throttle stick or pull it sown Slowly pull down the throttle till the land too fast too fast. chopper landing smoothly. CAUTION: . The control distance will shorter when the quantity of electricity is not full. . When the quantity of the electricity of the helicopter is not full, the helicopter will difficulty or the height of fly is not enough. . If the helicopter become damaged, deformation, please repaired in time. If the rotor become damaged or broken, do not fly, otherwise, it will lead to injury, . If you dont use the transmitter for a long time. Remove all batteries out, in order to avoid the battery leakage to damage this product. . Dont drop the helicopter from high position or crash it seriously, because that will damage it seriously or shorten the using time. . This product contains many kinds of alloy parts, please pay more attention when operating the helicopter. 7 Motor heating component, don't touch, avoid scald. FCC INFORMATION: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class 8 digital device. pursuant to Part ll 5 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequencv energy and. ifnot installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment offand on. the user is encouraged to try to correct the interference by one or more ofthe following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 1 Producer : Mac OS X 10.5.8 Quartz PDFContext Create Date : 2011:11:02 05:00:45Z Modify Date : 2011:11:02 05:00:45ZEXIF Metadata provided by EXIF.tools