Askey Computer QB-EMS-US1 Smart Plug User Manual warning 3 indd
Askey Computer Corp Smart Plug warning 3 indd
Contents
- 1. Users Manual (Statement) rev.pdf
- 2. Users Manual.pdf
Users Manual (Statement) rev.pdf
Security & Safety
Information & Warnings
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the interference by one of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and
must not be collocated or operating in conjunction with any other antenna or transmitter.
European Union Regulatory Conformance
The equipment complies with the RF Exposure Requirement 1999/5/EC; Council Recommendation of 12 July
1999 on the limitation of exposure of the general public to electromagnetic elds (0–300 GHz).
Changes or modications to this product not authorized by our company could void the EMC compliance
and negate your authority to operate the product. This product has demonstrated EMC compliance under
conditions that included the use of compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral devices and shielded cables between system
components to reduce the possibility of causing interference to radios, televisions, and other electronic
devices.
This equipment meets the following conformance standards:
EN 301489-1/-17, EN 55022, EN 55024
EN 300328, EN 301893
EN 62311
EN 60950-1
The device complies with RF specifications when the device used at 20cm form your body.
WLAN function of this device is restricted only to indoor use when operating in the 5150 to 5350 MHz
frequency range.
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計
之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方
得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
MPE 標準值及送測產品實測值電磁波暴露量MPE 標準值1mW/cm2,本產品使用時建議應距離人體20cm。
在5.15~5.25GHz頻帶內操作之無線資訊傳輸設備,限於室內使用。
v3 – 01/2016