Askey Computer QB-EMS-US1 Smart Plug User Manual Switch US v1 indd

Askey Computer Corp Smart Plug Switch US v1 indd

Contents

Users Manual.pdf

2 Connect it to Gateway
Press the WPS Button – LED blinks white.
Once the pairing is successful the LEDs of the Switch and
Gateway change to solid white.
The Switch will appear on your mobile and/or TV screen.
What’s in the box
Switch
1 Set-up Switch
Plug your QBee Switch into a power outlet.
Wait for 60 seconds
Press the WPS Button – LED blinks white.
Switch
WPS
www.shiftcontrolplay.com
LA1
WPS
Troubleshooting
Reconnect Switch
In case the Switch loses the connection to your QBee
Gateway, they have to be paired with the Gateway again.
Pairing – To do so, press the WPS button of your QBee
Gateway. The LED on the Gateway will start blinking in
white.
Then press the WPS button on the Switch. The LED on the
Switch will start blinking in white. When the pairing is done,
the LED will light solid white.
If the pairing of the Camera does not work, please reset
your Switch by pushing the WPS button for 10 seconds. This
will restore your Switch to factory settings. Once the reset is
complete, please repeat the Pairing process.
LEDs & Buttons
v1 – 122015
Support
QBee support is available online at
www.shiftcontrolplay.com
To contact QBee support go to
www.shiftcontrolplay.com/contact
LED
O Notpowered
White OK
Blinks white WPS Pairing in progress
Red Booting
Blinksred Problem/Notconnected
WPS Button
Pairing Reconnect the Switch – press 1 s
Reset Sets the Switch to its factory settings. Pairing will be lost.
Press 10 s – LED blinks red fast.
ON/OFF Button
WPS
LED

Navigation menu