Askey Computer QB-EMS-US1 Smart Plug User Manual Switch US v1 indd

Askey Computer Corp Smart Plug Switch US v1 indd

Contents

Users Manual.pdf

2 Connect it to GatewayPress the WPS Button – LED blinks white.Once the pairing is successful the LEDs of the Switch and Gateway change to solid white. The Switch will appear on your mobile and/or TV screen.What’s in the boxSwitch1 Set-up SwitchPlug your QBee Switch into a power outlet.Wait for 60 secondsPress the WPS Button – LED blinks white.SwitchWPSwww.shiftcontrolplay.comLA1WPS
TroubleshootingReconnect SwitchIn case the Switch loses the connection to your QBee Gateway, they have to be paired with the Gateway again. Pairing – To do so, press the WPS button of your QBee Gateway. The LED on the Gateway will start blinking in white.Then press the WPS button on the Switch. The LED on the Switch will start blinking in white. When the pairing is done, the LED will light solid white.If the pairing of the Camera does not work, please reset your Switch by pushing the WPS button for 10 seconds. This will restore your Switch to factory settings. Once the reset is complete, please repeat the Pairing process.LEDs & Buttonsv1 – 122015SupportQBee support is available online at www.shiftcontrolplay.comTo contact QBee support go to www.shiftcontrolplay.com/contactLEDO NotpoweredWhite OKBlinks white WPS Pairing in progressRed BootingBlinksred Problem/NotconnectedWPS ButtonPairing Reconnect the Switch – press 1 sReset Sets the Switch to its factory settings. Pairing will be lost. Press 10 s – LED blinks red fast.ON/OFF ButtonWPSLED

Navigation menu