Askey Computer QBREMOTE QBee Remote Control User Manual Kit v4 indd
Askey Computer Corp QBee Remote Control Kit v4 indd
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2961657 |
| Application ID | Z/SdDRXEwK2IWZ6kZZwpMg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 54.94kB (686804 bits) |
| Date Submitted | 2016-04-18 00:00:00 |
| Date Available | 2016-04-18 00:00:00 |
| Creation Date | 2015-12-04 22:45:25 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-01-21 18:44:00 |
| Document Title | Kit_v4.indd |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
What’s in the box Start Connect QBee Gateway Reset DC12V Get started with QBee Insert Batteries Your TV can be your QBee command, entertainment and control center. You decide what tiles you see, what colour they are and in which order you see them. Each tile is a function and gives you a certain information. And to control it all, you can use the QBee remove control or the virtual remote control on the Mobile App. Accessories Box Gateway Power Supply Camera Power Supply Ethernet Cable HDMI cable Multi-Sensor Camera Set-up QBee Gateway To use QBee, you need A high-definition TV with HDMI capable of displaying 720p or 1080p video or a smartphone with Apple iOS 7 or higher / Android 4.2 or higher A broadband Internet connection (DSL, cable, or LAN) Download QBee App The QBee App is available for Power ON/OFF Turn on TV TV Remote HDMI Input Plug your QBee Gateway into a power outlet, connect it to your router with the Ethernet cable and connect to your television with the HDMI cable. If you do no want to use/connect QBee with a TV then please go to step 5 . QBee App Insert the batteries into your QBee remote control and press any button. Start App Your QBee App is your command, entertainment and control center. You decide what tiles you see, what colour they are and in which order you see them. Each tile is a function and gives you a certain information. And it’s also a virtual remote control for QBee on TV. Enjoy QBee Discover more QBee features on the back of this user manual or online at www.shiftcontrolplay.com QBee Media Connected Home Remote 29 ¡C Taipei Settings Welcome Internet Please download the App from one of the App-Stores. Create an account and follow the on-screen instructions to connect the QBee Gateway with your account. Turn on your TV, then select the HDMI input that’s connected to your QBee Gateway. On some televisions, this may occur automatically. Discover more / Support HDMI LAN2 Turn on your QBee Gateway and follow the on-screen instructions. A series of screens assists you with the setup. www.shiftcontrolplay.com Switch Gateway Remote Power Supply HDMI / TV Internet OR ACCESSORIES HDMI LAN2 Ethernet / Router QBee on TV Power-on the Switch and the Camera and they will appear on your mobile and/or TV screen. QBee support is available on the back of this user manual or online at www.shiftcontrolplay.com To contact QBee support go to www.shiftcontrolplay.com/contact Play your own content Configure QBee Gateway Troubleshooting QBee allows you to play and view your favourite content – in any format. You have the possibility to configure the network settings of your QBee Gateway via the embedded Web UI. To do so, connect your computer to your Gateway by using an Ethernet cable and inserting it into the Gateway’s Internet Port at the back. Gateway Devices No image on TV Check that the Power and HDMI cables are properly connected. Power the Gateway off and on again. Check the input source on the TV Reconnect Switch or Camera In case the Switch or the Camera loses the connection to your QBee Gateway, they have to be paired with the Gateway again. SD card – Insert your SD card and view what’s on it and sync its contents to the built-in hard drive with the push of one button. Log into the QBee Web UI USB port – Insert your USB drive into the blue USB port at the back of the QBee Gateway – you can view and play your content directly from your USB drive. Web Services – play and view content from the Internet. YouTube, Spotify and The Onion are already configured for you. On the login page, enter the default user name (admin) and password (admin). You can configure the settings of your QBee Gateway. No content in the media library Please refer to section „Play your on content“ of this manual. Temperature Sensor LED OK Switch Remote Favorites LED WPS Button WPS Button Back Menu WPS Button Then press the WPS button on the Switch or Camera for 2 seconds. Navigation Humidity Sensor Off Not powered White OK Blinks white fast SD Card syncing Blinks white slowly WPS Pairing in progress Red Booting Blinks red Problem / Not connected Volume Up Volume Down Not powered White OK Blinks white WPS Pairing in progress Red Booting Blinks red Problem / Not connected LED Off Not powered White OK Blinks white WPS Pairing in progress Red Booting Blinks red Problem / Not connected ON/OFF Button Privacy Button (on top) – LED White > Privacy on WPS Button WPS Button WPS Button Power ON/OFF Power Supply HDMI nternet Internet 2I LAN LAN HDMI > TV USB Keyboard/ Mouse Reset Power Supply Camera Stand Slide up and turn 90° for Wall-Mount Headset / Stereo USB 3.0 for Media DC12V If the pairing of the Switch or Camera does not work, please reset your Switch or Camera by pushing the WPS button for 10 seconds. This will restore your Switch or Camera to factory settings. Once the reset is complete, please repeat the Pairing process. Ambient Light Sensor LED Off LED LED Play/Pause Power ON/OFF The LED on the Switch or Camera will start blinking in white. When the pairing is done, the LED will light continuously in white. Night Vision LEDs Sync Button SD Card Slot Remote not working / New remote Remove the batteries from your remote control. Press the OK button on your remote and then reinsert the batteries. Reconnect the QBee Gatewy to the remote. Press and hold the WPS button on the Gateway for three seconds. Done. Camera Lens Pairing – To do so, press the WPS button of your QBee Gateway for 2 seconds. The LED on the Gateway will start blinking in white. LA PC/Mac – Copy the content from your computer via Windows/Samba (SMB) or Mac (AFP). On your web browser, enter the QBee Gateway’s default IP address 192.168.1.1 Remote QBee Home Button QBee Mobile App – Upload the content from the App via Media/File Section. QBee Gateway Reset – Press 2 s WPS Button Pairing Reconnect the Switch – press 2 s Reset Sets the Switch to its factory settings. Pairing is lost Press 10 s – LED blinks red fast WPS Button Pairing Reconnect the Camera – press 2 s Reset Sets the Camera to its factory settings. Pairing is lost Press 10 s – LED blinks red fast v1 – 122015 Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Security & Safety Information & Warnings This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. European Union Regulatory Conformance 低功率電波輻射性電機管理辦法 The equipment complies with the RF Exposure Requirement 1999/5/EC; Council Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300 GHz). 第十二條 Changes or modifications to this product not authorized by our company could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. This equipment meets the following conformance standards: EN 301489-1/-17, EN 55022, EN 55024 EN 300328, EN 301893 EN 62311 EN 60950-1 The device complies with RF specifications when the device used at 20cm form your body. WLAN function of this device is restricted only to indoor use when operating in the 5150 to 5350 MHz frequency range. 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計 之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方 得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫 療用電波輻射性電機設備之干擾。 MPE 標準值及送測產品實測值電磁波暴露量MPE 標準值1mW/cm2，本產品使用時建議應距離人體34cm。 在5.15~5.25GHz頻帶內操作之無線資訊傳輸設備，限於室內使用。
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2015:12:04 22:45:25+01:00 Metadata Date : 2016:01:21 18:44+08:00 Modify Date : 2016:01:21 18:44+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:cfc9bccd-d834-4f6c-9a16-e5ca805fe965 Original Document ID : xmp.did:bf576c9e-b0af-4d5c-a50d-5fa767733f64 Document ID : xmp.id:083c55fa-fc01-49f6-a41d-2a07b0b9ad91 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:01ccd472-dba3-474b-9435-ade64a3523a4 Derived From Document ID : xmp.did:14c025b7-2e39-4f6f-b5c9-2f5df9d430b9 Derived From Original Document ID: xmp.did:bf576c9e-b0af-4d5c-a50d-5fa767733f64 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2015:12:04 22:45:25+01:00 Format : application/pdf Title : Kit_v4.indd Producer : Adobe PDF Library 15.0 Trapped : False GTS PDFX Version : PDF/X-1:2001 GTS PDFX Conformance : PDF/X-1a:2001 Page Count : 4 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools