Askey Computer WLF3020 Wireless 802.11bg CF Card User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	623352
Application ID	luvhxy1eO3/b0knhFtiNjw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.61kB (257678 bits)
Date Submitted	2006-01-26 00:00:00
Date Available	2006-01-26 00:00:00
Creation Date	2005-11-29 17:21:02
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-01-26 10:03:24
Document Title	Microsoft Word - 文件1
Document Creator	PScript5.dll Version 5.2
Document Author:	ZOE

Wireless CF Card
WLF3020
User Guide
Version 2.0
Jan.23, 2006
Wireless CF Card_WLF3020 Design Specification
Rev.6
A. Specifications
Host Interfaces
Co mp ac t F las h
Compatible Interfaces
Co mp ac t F las h Type Ι
Form factor
Co mp ac t F las h Type Ι
Chipset
MARVELL 88W8385 + 88W8015
Operation Voltage
DC 3.3V
Network Standards
IEEE 802.11g/b
Modulation Techniques
DBPSK, DQPSK, CCK, 16QAM, 64QAM,
Modulation Technology
DSSS and OFDM
Data Rate
802.11b: 11, 5.5, 2, 1 Mbps
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Network Architectures
Infrastructure and Ad Hoc
Operating Frequencies
2.4 – 2.4835 GHz
Operating Channels
802.11b/g: 1-11 for North America
Before antenna
RF Output Power
802.11b (1M,2M,5.5M,11M) : 13 dBm
802.11g (6M,9M,12M,18M,24M,36M, 48M,54M) : 13 dBm
802.11b:1M=-90dBm,2M=-90dBm,5.5M=-90dBm,11M=-87dBm
Receiver sensitivity
802-11g:6M=-83dBm,9M=-83dBm,12M=-83dBm,18M=-83dBm,24M=-81dBm
36M=-78dBm,48M=-74dBm,54M=-73dBm
Power Consumption
Tx peak: 500mA @ 3.3VDC; Rx peak: 275mA @ 3.3VDC
Support Voltage
3.3V
Security
Delay Tolerance
Software Support
WEP 64-and 128-bit encryption with hardware TKIP processing.
WPA
Multi-path R.M.S Delay Spread @ 10%FER
680 ns in 11M mode,150ns in 54M mode
Windows CE 4.2 & CE 5.0,.Linux
Operates from -20 to 70 ℃
Temperatures
Storage from -40 to 120 ℃
Humidity (non-condensing) 5 to 95%*
Wi-Fi Pretest*; FCC part 15C/15.247*; ETS 300 328-2*; UL*; IEC60950*; EN 301
Certifications
489-1,17*; prEN50371*;CE Mark*; TELEC*
* Per for m ap pro ved proc edu re is b ased on cus tomer’s re ques t.
WLFWire
-1-
B. Marvell WLAN 802.11b/g CF8385PN Software Feature
Short preamble
802.11b, 802.11g, and g/b mix-mode infrastructure
802.11b and 802.11g Adhoc mode
C o re Fe atu re s
Transmit fragmentation and receive defragmentation
Client IEEE Power Save Infrastructure & Adhoc mode
Basic rate adaptation - 11g/b for optimizing each STA throughput
Background scan
64/ 128-bit WEP Encryption and open/ shared authentication
WPA PSK
WPA 802.1x
Security
WPAII PSK**
WPAII 802.1x**
Cisco CCX V1 (LEAP)**
Hardware AES
AH Security
IEEE 802.11b
IEEE 802.11g
IEEE St andards
IEEE 802.11d**
IEEE 802.11e (EDCA)**
IEEE 802.11e (HCCA)**
Ot he r Sta nd ar ds
Wi-Fi WME**
Wi-Fi WSM APSD**
Windows CE.net (CE4.2, CE5.0)
D r i ve rs f or t he f o l low ing Windows Pocket PC 2003
O pe rat i ng S ys t e ms
Windows Mobile Edition
Linux 2.4.22 and above
Ne tw ork Pr ot oco l
TCP/IP, IPX
** NOTE **
The transmitter module is authorized for use in specific End-product (WORKABOUT PRO
Hand-held Micro-computer as models of 7525C, 7525M and 7525S). The OEM integrator
is still responsible for testing their endproduct for any additional compliance requirements
required with this module installed.
-2-
C. Block Diagram
***Subject to be changed without notice.
-3-
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This device is intended only for OEM integrators under the following
conditions:
The transmitter module may not be co-located with any other transmitter or
antenna.
As long as conduction above is met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product
for any additional compliance requirements required with this module installed
(for example, digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another transmitter),
then the FCC authorization is no longer considered valid and the FCC ID can
not be used on the final product. In these circumstances, the OEM integrator
will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
End Product Labeling
The final end product must be labeled in a visible area with the following:
“Contains TX FCC ID: H8NWLF3020”.
Manual Information That Must be Included
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the users manual of the
end product which integrate this module.
The users manual for OEM integrators must include the following information
in a prominent location “ IMPORTANT NOTE: To comply with FCC RF
exposure compliance requirements. The antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:11:29 17:21:02+08:00
Modify Date                     : 2006:01:26 10:03:24+08:00
Producer                        : Acrobat Distiller 7.0 (Windows)
Mod Date                        : 2006:01:26 10:03:24+08:00
Creation Date                   : 2005:11:29 17:21:02+08:00
Author                          : ZOE
Metadata Date                   : 2006:01:26 10:03:24+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:7bed126e-142a-462d-a855-1aef3ec75e2b
Instance ID                     : uuid:6f748020-4519-4886-9a91-9ae41709b168
Format                          : application/pdf
Title                           : Microsoft Word - 文件1
Creator                         : ZOE
Page Count                      : 6

EXIF Metadata provided by EXIF.tools