Askey Computer WLU5040 USB WLAN ADAPTER User Manual User s manual 20100507

Askey Computer Corp USB WLAN ADAPTER User s manual 20100507

Users Manual

USB WLAN Adapter WLU5040(ROHS) Quick Setup Guide v0.1 Askey Computer Corp. WLU5040(ROHS) Features z Compatible with IEEE802.11a/b/g/n z Supports USB 2.0 How to use this USB WLAN Adapter Turn on the power of the Host device. (For example, TV or printer or other mobile device) Choose “PREFERENCES” → “Network Setup” → “ Easy Setup” → “WPS Configuration” → select “PBC” → “Push WPS button on your AP” → complete wireless configuration → quit the setup menu → launch internet application
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. FCC/IC Radiation Exposure Statement: This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. FCC IMPORTANT NOTE: This module is intended for OEM integrator only and limited to host which can only work with mobile device. (For example, TV or printer or other mobile device). The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: H8N-WLU5040 ". The FCC part 15.19 statement below has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC No. can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains TX IC: 1353A-WLU5040”.
Europe Statement Important notice This USB WLAN Adapter may be operated in below country: AT BE CH CY CZ DE DK ES FI FR GB GR EE HU IT IE IS LI LT LU LV MT NL NO PL PT SE SI SK BG RO TR 1. If this device is going to be operated in 5.15 ~ 5.35GHz frequency range, then it is restricted in indoor environment only. 2. If this device is going to be operated for 802.11 b/g/n function 2.454 ~ 2.4835 GHz frequency range in France, then it is restricted in indoor environment use only. 3. In Italy, for private use, a general authorization is required if WAS/RLAN’s are used outside own premises, For public use, a general authorization is required. 4. If this device intend use in Norway, it is NOT ALLOW use in the geographical area within a radius of 20km from the centre of Ny-Alesund.

Navigation menu