Askey Computer WLU5150 Wireless LAN Adaptor User Manual rev1

Download:
Mirror Download [FCC.gov]
Document ID	1591018
Application ID	6X0iZ7L/o6NggrQWQ2tG1Q==
Document Description	user manual rev1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.08kB (313509 bits)
Date Submitted	2011-11-30 00:00:00
Date Available	2011-11-30 00:00:00
Creation Date	2011-11-29 20:52:59
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-11-29 20:59:52
Document Title	user manual rev1
Document Creator	Microsoft® Office Word 2007
Document Author:	松田幸子

ENGLISH
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from thatto which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to
all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US
operation channels only.
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
Product Identification Marking is located on the bottom of the Wireless LAN Adaptor.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux
appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions
suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point
operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary
users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to LE-LAN devices.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des
instructions précises sur les restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5
250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5
725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation
point à point et non point à point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de
radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils
ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec
un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
NCC
802.11b/802.11g/BT 警語：
第十二條→經型式認證合格之低功率射頻電機，非經許可，公司，商號或使用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。
第十四條→低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立
即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科
學及醫療用電波輻射性電機設備之干擾。
802.11a 警語：
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。 (4.7.5)
無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信；如造成干擾，應立即停用，俟無干擾
之虞，始得繼續使用。 (4.7.6)
無線資訊傳設備的製造廠商應確保頻率穩定性，如依製造廠商使用手冊上所述正常操作，發射的信
號應維持於操作頻帶中。(4.7.7)
日本
Caution
Be aware of the following limits before using the Wireless LAN Adaptor.
●To use the Wireless LAN Adaptor, an access point needs to be obtained.
●Do not use the Wireless LAN Adaptor to connect to any wireless network (SSID∗) for which you
do not have usage rights. Such networks may be listed as a result of searches. However, using
them may be regarded as illegal access.
∗SSID is a name for identifying a particular wireless network for transmission.
●Do not subject the Wireless LAN Adaptor to high temperatures, direct sunlight or moisture.
●Do not bend, or subject the Wireless LAN Adaptor to strong impacts.
●Do not disassemble or alter the Wireless LAN Adaptor in any way.
●Do not attempt to install the Wireless LAN Adaptor in any incompatible device.
●Do not remove the Wireless LAN Adaptor from the TV’s during operations.
●Data transmitted and received over radio waves may be intercepted and monitored.
●To avoid malfunctions caused by radio wave interface, keep the TV away from the devices
such as other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz
signals when using the Wireless LAN Adaptor.
●When noises occur due to the static electricity, etc., the TV might stop operating for the
protection of the devices. In this case, turn the TV Off with Mains power On / Off switch, then turn
it On again.
●Depending on the area, this Wireless LAN Adaptor may not be available.
Setup the wireless LAN connection
Confirm the encryption key, settings and positions of your access point before
starting setup. For details, read the manual of the access point.
(1) connect the Wireless LAN Adaptor to the USB port.
(2) Select the connection type and set.
Connection Type
WPS(Push button)
WPS(PIN)
Search for access point
Manual
(3-1) WPS(Push botton)
Press the WPS button on the access point until the light flashes.
And then, press the OK button.
(3-2) WPS(PIN)
Select your desired access point.
Enter the PIN code to the access point, and then select.
(3-3) Search for access point
Access points found automatically are listed.
Select your desired access point.
Access the encryption key input mode.
Enter the encryption key of the access point.
(3-4) Manual
You can setup SSID, authentication type, encryption type, and encryption key
manually. Follow the on screen instructions and set manually.
Specifications
Power supply
DC 5V (USB powered) 500mA
Antenna
Tx 2, Rx 2
Interface
USB 2.0
Standard Compliance
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system
MISO-OFDM system, OFDM system, DSSS system
IEEE802.11n / IEEE802.11a :
Frequency Range*1,*2
5.150GHz - 5.850 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.400 GHz - 2.4835 GHz
IEEE802.11n: Tx Max. 300Mbps, Rx Max. 300Mbps
Transfer rate (standard) *3
IEEE802.11g / IEEE802.11a: Max. 54Mbps
IEEE802.11b: Max. 11Mbps
Access Mode
Infrastructure mode
WPA2-PSK (TKIP/AES)
Security
WPA-PSK (TKIP/AES)
WEP (64bit/128bit)
*1 The frequency and channel differ depending on the country.
*2 802.11b/g/n CH1 ~ CH11 only use for North America, Canada, and Taiwan.
*3 Transfer rate are theoretical values; however, actual communication rate will vary
according to communication environment or connected equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:11:29 20:52:59Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2011:11:29 20:59:52+08:00
Metadata Date                   : 2011:11:29 20:59:52+08:00
Format                          : application/pdf
Creator                         : 松田幸子
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:5b7abf82-8beb-4388-a6bb-bd8b013b7f61
Instance ID                     : uuid:eb451e92-11c6-4d2a-abfb-4ed184178b1e
Page Count                      : 8
Language                        : zh-TW
Author                          : 松田幸子

EXIF Metadata provided by EXIF.tools