Asrock 985Gm Gs3 Fx Quick Start Guide FX_985GM S3 FX_QIG_ASR.p65

2014-07-05

: Asrock Asrock-985Gm-Gs3-Fx-Quick-Start-Guide asrock-985gm-gs3-fx-quick-start-guide asrock pdf

Open the PDF directly: View PDF .
Page Count: 161 [warning: Documents this large are best viewed by clicking the View PDF Link!]

English
German
French
Italian
Spanish
Russian
Portuguese
Turkish
Korean
Japanese
Simplified Chinese
Traditional Chinese
Indonesian

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documen-

tation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identifica-

tion or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this guide are furnished for informational

use only and subject to change without notice, and should not be constructed as a

commitment by ASRock. ASRock assumes no responsibility for any errors or omissions

that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or

conditions of merchantability or fitness for a particular purpose. In no event shall

ASRock, its directors, officers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits, loss of

business, loss of data, interruption of business and the like), even if ASRock has been

advised of the possibility of such damages arising from any defect or error in the guide

or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Published July 2013

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

2ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

Motherboard LayoutMotherboard Layout

Motherboard Layout

(985GM-(985GM-

(985GM-GS3 FX / 985GM-S3 FX )GS3 FX / 985GM-S3 FX )

GS3 FX / 985GM-S3 FX )GS3 FX / 985GM-S3 FX )

GS3 FX / 985GM-S3 FX )

1 PS2_USB_PW1 Jumper 15 System Panel Header (PANEL1, White)

2 ATX 12V Power Connector (ATX12V1) 16 Secondary SATAII Connector

3 CPU Heatsink Retention Module (SATAII_2 (PORT 1))

4 AM3 CPU Socket 17 Primary SATAII Connector

5 2 x 240-pin DDR3 DIMM Slots (SATAII_1 (PORT 0))

(Dual Channel: DDR3_A1, DDR3_B1; Blue) 18 USB 2.0 Header (USB4_5, Blue)

6 CPU Fan Connector (CPU_FAN1) 19 USB 2.0 Header (USB6_7, Blue)

7 ATX Power Connector (ATXPWR1) 20 Chassis Fan Connector (CHA_FAN1)

8 Chassis Speaker Header 21 Floppy Connector (FLOPPY1)

(SPEAKER 1, White) 22 Print Port Header (LPT1, White)

9 Clear CMOS Jumper (CLRCMOS1) 23 Front Panel Audio Header

10 Primary IDE Connector (IDE1, Blue) (HD_AUDIO1, White)

11 Northbridge Controller 24 PCI Slots (PCI1- 2)

12 Southbridge Controller 25 SPI Flash Memory (8Mb)

13 Third SATAII Connector (SATAII_3 (PORT 2)) 26 PCI Express 2.0 x16 Slot (PCIE2; Blue)

14 Fourth SATAII Connector (SATAII_4 (PORT 3)) 27 PCI Express 2.0 x1 Slot (PCIE1; Blue)

28 Power Fan Connector (PWR_FAN1)

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

I/O PI/O P

I/O Panel (985GM-anel (985GM-

anel (985GM-anel (985GM-

anel (985GM-GS3 FX)GS3 FX)

GS3 FX)GS3 FX)

GS3 FX)

1 PS/2 Mouse Port (Green) 6 Microphone (Pink)

2 USB 2.0 Ports (USB23) 7 USB 2.0 Ports (USB01)

* 3 RJ-45 Port 8 VGA Port

4 Line In (Light Blue) 9 COM Port

5 Line Out (Lime) 10 PS/2 Keyboard Port (Purple)

* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows® XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system.

For Windows® 7 / VistaTM:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Activity Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

Green 1Gbps connection LAN Port

ACT/LINK

LED

SPEED

LED

4ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

I/O PI/O P

I/O Panel (985GM-S3 FX)anel (985GM-S3 FX)

anel (985GM-S3 FX)anel (985GM-S3 FX)

anel (985GM-S3 FX)

1 PS/2 Mouse Port (Green) 6 Microphone (Pink)

2 USB 2.0 Ports (USB23) 7 USB 2.0 Ports (USB01)

* 3 RJ-45 Port 8 VGA Port

4 Line In (Light Blue) 9 COM Port

5 Line Out (Lime) 10 PS/2 Keyboard Port (Purple)

* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows® XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system.

For Windows® 7 / VistaTM:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Activity Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

LAN Port

ACT/LINK

LED

SPEED

LED

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1.1.

1. IntroductionIntroduction

IntroductionIntroduction

Introduction

Thank you for purchasing ASRock 985GM-GS3 FX / 985GM-S3 FX motherboard, a

reliable motherboard produced under ASRock’s consistently stringent quality control. It

delivers excellent performance with robust design conforming to ASRock’s commit-

ment to quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step

guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to

BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might

be updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.11.1

1.1 PP

Packack

ackack

ackage Contentsage Contents

age Contentsage Contents

age Contents

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

(Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm)

ASRock 985GM-GS3 FX / 985GM-S3 FX Quick Installation Guide

ASRock 985GM-GS3 FX / 985GM-S3 FX Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

EnglishEnglish

English

6ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

1.21.2

1.2 SpecificationsSpecifications

SpecificationsSpecifications

Specifications

Platform - Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm

- Solid Capacitor for CPU power

CPU - Support for Socket AM3+ processors

- Support for Socket AM3 processors: AMD PhenomTM II X6 /

X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 /

Sempron processors

- Supports 8-Core CPU

- Supports AMD OverDriveTM with ACC feature (Advanced

Clock Calibration)

- AMD LIVE!TM Ready

- Supports AMD’s Cool ‘n’ QuietTM Technology

- FSB 2600 MHz (5.2 GT/s)

- Supports Untied Overclocking Technology (see CAUTION 1)

- Supports Hyper-Transport 3.0 (HT 3.0) Technology

Chipset - Northbridge: AMD 785G

- Southbridge: AMD SB710

Memory - Dual Channel DDR3 Memory Technology (see CAUTION 2)

- 2 x DDR3 DIMM slots

- Support DDR3 1800(OC)/1600(OC)/1333/1066/800 non-ECC,

un-buffered memory (see CAUTION 3)

- Max. capacity of system memory: 8GB (see CAUTION 4)

Expansion Slot - 1 x PCI Express 2.0 x16 slot (blue @ x16 mode)

- 1 x PCI Express 2.0 x1 slot

- 2 x PCI slots

- Supports AMD Hybrid CrossFireXTM

Graphics - Integrated AMD Radeon HD 4200 graphics

- DX10.1 class iGPU, Pixel Shader 4.1

- Max. shared memory 512MB (see CAUTION 5)

- Supports D-Sub with max. resolution up to 2048x1536 @

60Hz

Audio - 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN - 985GM-GS3 FX

Realtek PCIE x1 Gigabit LAN RTL8111E,

speed 10/100/1000 Mb/s

- 985GM-S3 FX

Realtek PCIEx1 LAN 8105EL, speed 10/100 Mb/s

- Supports Wake-On-LAN

- Supports PXE

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Serial Port: COM1

- 1 x VGA Port

- 4 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

- HD Audio Jack: Line in / Front Speaker / Microphone

Connector - 4 x SATA2 3.0Gb/s connectors, support RAID (RAID 0, RAID 1,

RAID 10 and JBOD), NCQ, AHCI and “Hot Plug” functions

(see CAUTION 6)

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x Print port header

- CPU/Chassis/Power FAN connector

- 24 pin ATX power connector

- 4 pin 12V power connector

- Front panel audio connector

- 2 x USB 2.0 headers (support 4 USB 2.0 ports)

BIOS Feature - 8Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

- CPU, VCCM, NB Voltage Multi-adjustment

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version), CyberLink

MediaEspresso 6.5 Trial, Google Chrome Browser and Toolbar

Unique Feature - ASRock OC Tuner (see CAUTION 7)

- ASRock Intelligent Energy Saver (see CAUTION 8)

- ASRock Instant Boot

- ASRock Instant Flash (see CAUTION 9)

- ASRock OC DNA (see CAUTION 10)

- ASRock APP Charger (see CAUTION 11)

- ASRock XFast USB (see CAUTION 12)

- ASRock XFast LAN (see CAUTION 13)

- Hybrid Booster:

- CPU Frequency Stepless Control (see CAUTION 14)

- ASRock U-COP (see CAUTION 15)

8ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

WARNING

Please realize that there is a certain risk involved with overclocking, including

adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using

the third-party overclocking tools. Overclocking may affect your system stability, or

even cause damage to the components and devices of your system. It should be

done at your own risk and expense. We are not responsible for possible damage

caused by overclocking.

CAUTION!

1. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 24 for details.

2. This motherboard supports Dual Channel Memory Technology. Before

you implement Dual Channel Memory Technology, make sure to read

the installation guide of memory modules on page 13 for proper

installation.

3. Whether 1800/1600MHz memory speed is supported depends on the

AM3/AM3+ CPU you adopt. If you want to adopt DDR3 1800/1600 memory

module on this motherboard, please refer to the memory support list on

our website for the compatible memory modules.

ASRock website http://www.asrock.com

4. Due to the operating system limitation, the actual memory size may be

less than 4GB for the reservation for system usage under Windows® 7

/ VistaTM / XP. For Windows® OS with 64-bit CPU, there is no such

limitation.

5. The maximum shared memory size is defined by the chipset vendor

and is subject to change. Please check AMD website for the latest

information.

6. Before installing SATAII hard disk to SATAII connector, please read the “SATAII

Hard Disk Setup Guide” on page 27 of “User Manual” in the support CD to

adjust your SATAII hard disk drive to SATAII mode. You can also connect

SATA hard disk to SATAII connector directly.

- Boot Failure Guard (B.F.G.)

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU/Chassis/Power Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

OS - Microsoft® Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit

/ XP / XP Media Center / XP 64-bit compliant

Certifications - FCC, CE, WHQL

- ErP/EuP Ready (ErP/EuP ready power supply is required)

(see CAUTION 16)

* For detailed product information, please visit our website: http://www.asrock.com

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

7. It is a user-friendly ASRock overclocking tool which allows you to surveil

your system by hardware monitor function and overclock your hardware

devices to get the best system performance under Windows®

environment. Please visit our website for the operation procedures of

ASRock OC Tuner. ASRock website: http://www.asrock.com

8. Featuring an advanced proprietary hardware and software design,

Intelligent Energy Saver is a revolutionary technology that delivers

unparalleled power savings. The voltage regulator can reduce the num-

ber of output phases to improve efficiency when the CPU cores are idle.

In other words, it is able to provide exceptional power saving and im-

prove power efficiency without sacrificing computing performance. To

use Intelligent Energy Saver function, please enable Cool ‘n’ Quiet op-

tion in the BIOS setup in advance. Please visit our website for the opera-

tion procedures of Intelligent Energy Saver.

ASRock website: http://www.asrock.com

9. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM.

This convenient BIOS update tool allows you to update system BIOS

without entering operating systems first like MS-DOS or Windows®.

With this utility, you can press <F6> key during the POST or press <F2>

key to BIOS setup menu to access ASRock Instant Flash. Just launch

this tool and save the new BIOS file to your USB flash drive, floppy disk

or hard drive, then you can update your BIOS only in a few clicks without

preparing an additional floppy diskette or other complicated flash utility.

Please be noted that the USB flash drive or hard drive must use FAT32/

16/12 file system.

10. The software name itself – OC DNA literally tells you what it is capable

of. OC DNA, an exclusive utility developed by ASRock, provides a conve-

nient way for the user to record the OC settings and share with others.

It helps you to save your overclocking record under the operating sys-

tem and simplifies the complicated recording process of overclocking

settings. With OC DNA, you can save your OC settings as a profile and

share with your friends! Your friends then can load the OC profile to their

own system to get the same OC settings as yours! Please be noticed

that the OC profile can only be shared and worked on the same

motherboard.

11. If you desire a faster, less restricted way of charging your Apple devices,

such as iPhone/iPod/iPad Touch, ASRock has prepared a wonderful

solution for you - ASRock APP Charger. Simply installing the APP Charger

driver, it makes your iPhone charged much quickly from your computer

and up to 40% faster than before. ASRock APP Charger allows you to

quickly charge many Apple devices simultaneously and even supports

continuous charging when your PC enters into Standby mode (S1),

Suspend to RAM (S3), hibernation mode (S4) or power off (S5). With

APP Charger driver installed, you can easily enjoy the marvelous charg-

ing experience than ever.

ASRock website: http://www.asrock.com/Feature/AppCharger/index.asp

1010

10 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

12. ASRock XFast USB can boost USB storage device performance. The

performance may depend on the property of the device.

13. ASRock XFast LAN provides a faster internet access, which includes

below benefits. LAN Application Prioritization: You can configure your

application priority ideally and/or add new programs. Lower Latency in

Game: After setting online game priority higher, it can lower the latency

in game. Traffic Shaping: You can watch Youtube HD video and down-

load files simultaneously. Real-Time Analysis of Your Data: With the

status window, you can easily recognize which data streams you are

currently transferring.

14. Although this motherboard offers stepless control, it is not recom-

mended to perform over-clocking. Frequencies other than the recom-

mended CPU bus frequencies may cause the instability of the system

or damage the CPU.

15. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC

system.

16. EuP, stands for Energy Using Product, was a provision regulated by Euro-

pean Union to define the power consumption for the completed system.

According to EuP, the total AC power of the completed system shall be

under 1.00W in off mode condition. To meet EuP standard, an EuP ready

motherboard and an EuP ready power supply are required. According to

Intel’s suggestion, the EuP ready power supply must meet the standard of

5v standby power efficiency is higher than 50% under 100 mA current

consumption. For EuP ready power supply selection, we recommend you

checking with the power supply manufacturer for more details.

1111

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2.2.

2. InstallationInstallation

InstallationInstallation

Installation

This is a Micro ATX form factor (9.6-in x 7.2-in, 24.4 cm x 18.3 cm) motherboard.

Before you install the motherboard, study the configuration of your chassis to ensure

that the motherboard fits into it.

Pre-installation PrecautionsPre-installation Precautions

Pre-installation Precautions

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to the

motherboard, peripherals, and/or components.

1. Unplug the power cord from the wall socket before touching any

component.

2. To avoid damaging the motherboard components due to static

electricity, NEVER place your motherboard directly on the carpet or

the like. Also remember to use a grounded wrist strap or touch a

safety grounded object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the motherboard

to the chassis, please do not over-tighten the screws! Doing so may

damage the motherboard.

EnglishEnglish

English

1212

12 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

2.12.1

2.1 CPU InstallationCPU Installation

CPU InstallationCPU Installation

CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90o angle.

Step 2. Position the CPU directly above the socket such that the CPU corner with

the golden triangle matches the socket corner with a small triangle.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU

into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push

down the socket lever to secure the CPU. The lever clicks on the side tab

to indicate that it is locked.

2.22.2

2.2 Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink

Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a

larger heatsink and cooling fan to dissipate heat. You also need to spray

thermal grease between the CPU and the heatsink to improve heat

dissipation. Make sure that the CPU and the heatsink are securely fas-

tened and in good contact with each other. Then connect the CPU fan to

the CPU FAN connector (CPU_FAN1, see Page 2, No. 6). For proper

installation, please kindly refer to the instruction manuals of the CPU fan

and the heatsink.

STEP 1:

Lift Up The Socket Lever

STEP 2 / STEP 3:

Match The CPU Golden Triangle

To The Socket Corner Small

Triangle

STEP 4:

Push Down And Lock

The Socket Lever

Lever 90° Up

CPU Golden Triangle

Socker Corner Small Triangle

1313

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2.3 Installation of Memor2.3 Installation of Memor

2.3 Installation of Memory Modules (DIMM)y Modules (DIMM)

y Modules (DIMM)y Modules (DIMM)

y Modules (DIMM)

985GM-GS3 FX / 985GM-S3 FX motherboard provides two 240-pin DDR3 (Double Data

Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel

configuration, you always need to install two identical (the same brand, speed, size and

chip-type) memory modules in the DDR3 DIMM slots to activate Dual Channel Memory

Technology. Otherwise, it will operate at single channel mode.

1. It is not allowed to install a DDR or DDR2 memory module into

DDR3 slot;otherwise, this motherboard and DIMM may be damaged.

2. If you install only one memory module or two non-identical memory

modules, it is unable to activate the Dual Channel Memory Technology.

Installing a DIMMInstalling a DIMM

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the

slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

EnglishEnglish

English

1414

14 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

2.4 Expansion Slots (PCI and PCI Express Slots)2.4 Expansion Slots (PCI and PCI Express Slots)

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 2 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots:

PCIE1 (PCIE x1 slot; Blue) is used for PCI Express cards with x1 lane

width cards, such as Gigabit LAN card, SATA2 card, etc.

PCIE2 (PCIE x16 slot; Blue) is used for PCI Express cards with x16 lane

width graphics cards.

Installing an expansion cardInstalling an expansion card

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply

is switched off or the power cord is unplugged. Please read the documentation

of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 3. Align the card connector with the slot and press firmly until the card is com-

pletely seated on the slot.

Step 4. Fasten the card to the chassis with screws.

1515

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2.5 Multi Monitor Feature2.5 Multi Monitor Feature

2.5 Multi Monitor Feature

This motherboard supports multi monitor feature. With the internal VGA output

support and the external add-on PCI Express VGA card, you can easily enjoy the

benefits of multi monitor feature.

Please refer to the following steps to set up a surround display environment:

1. Install the ATITM PCI Express VGA cards on PCIE2 slot. Please refer to page 14

for proper expansion card installation procedures for details.

2. Connect D-Sub monitor cable to VGA port on the I/O panel. And connect other

monitor cables to the corresponding connectors of the add-on PCI Express

VGA cards on PCIE2 slot.

VGA port

3. Boot your system. Press <F2> to enter BIOS setup. Enter “Share Memory”

option to adjust the memory capability to [32MB], [64MB], [128MB] [256MB] or

[512MB] to enable the function of VGA. Please make sure that the value

you select is less than the total capability of the system memory. If you do not

adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable

VGA function when the add-on VGA card is inserted to this motherboard.

4. Install the onboard VGA driver and the add-on PCI Express VGA card driver to

your system. If you have installed the drivers already, there is no need to install

them again.

5. Set up a multi-monitor display.

For Windows® XP / XP 64-bit OS:

Right click the desktop, choose “Properties”, and select the “Settings” tab

so that you can adjust the parameters of the multi-monitor according to the

steps below.

A. Click the “Identify” button to display a large number on each monitor.

B. Right-click the display icon in the Display Properties dialog that you wish

to be your primary monitor, and then select “Primary”. When you use

multiple monitors with your card, one monitor will always be Primary,

and all additional monitors will be designated as Secondary.

C. Select the display icon identified by the number 2.

D. Click “Extend my Windows desktop onto this monitor”.

EnglishEnglish

English

1616

16 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

E. Right-click the display icon and select “Attached”, if necessary.

F. Set the “Screen Resolution” and “Color Quality” as appropriate for the

second monitor. Click “Apply” or “OK” to apply these new values.

G. Repeat steps C through E for the diaplay icon identified by the number

one, two and three.

For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:

Right click the desktop, choose “Personalize”, and select the “Display

Settings” tab so that you can adjust the parameters of the multi-monitor

according to the steps below.

A. Click the number ”2” icon.

B. Click the items “This is my main monitor” and “Extend the desktop onto

this monitor”.

C. Click “OK” to save your change.

D. Repeat steps A through C for the display icon identified by the number

three.

6. Use multi monitor feature. Click and drag the display icons to positions

representing the physical setup of your monitors that you would like to use. The

placement of display icons determines how you move items from one monitor to

another.

1717

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2.62.6

2.6 AA

ATITI

TITI

TITMTM

TMTM

TM Hybrid CrossF Hybrid CrossF

Hybrid CrossF Hybrid CrossF

Hybrid CrossFireXireX

ireXireX

ireXTMTM

TMTM

TM Operation Guide Operation Guide

Operation Guide Operation Guide

Operation Guide

This motherboard supports ATITM Hybrid CrossFireXTM feature. ATITM Hybrid

CrossFireXTM brings multi-GPU performance capabilities by enabling an AMD 785G

integrated graphics processor and a discrete graphics processor to operate

simultaneously with combined output to a single display for blisteringly-fast frame

rates. Currently, ATITM Hybrid CrossFireXTM Technology is only supported with

Windows® VistaTM / 7 OS, and is not available with Windows® XP OS. In the future,

ATITM Hybrid CrossFireXTM may be supported with Windows® XP OS. Please visit our

website for updated information.

Enjoy the benefit of AEnjoy the benefit of A

Enjoy the benefit of ATITI

TITI

TITMTM

TMTM

TM Hybrid CrossF Hybrid CrossF

Hybrid CrossF Hybrid CrossF

Hybrid CrossFireXireX

ireXireX

ireXTMTM

TMTM

Step 1. Install one compatible PCI Express graphics card to PCIE2 slot (blue). For the

proper installation procedures, please refer to section “Expansion Slots”.

Step 2. Connect the monitor cable to the correspondent connector on the PCI

Express graphics card on PCIE2 slot.

Step 3. Boot your system. Press <F2> to enter BIOS setup. Enter “Advanced” screen,

and enter “Chipset Settings”. Then set the option “Surround View” to [Enabled].

Step 4. Boot into OS. Please remove the ATITM driver if you have any VGA driver

installed in your system.

Step 5. Install the onboard VGA driver from our support CD to your system for both the

onboard VGA and the discrete graphics card.

Step 6. Restart your computer. Then you will find “ATI Catalyst Control Center” on

your Windows® taskbar.

Vendor Chipset Model Driver

ATI RADEON X2400PRO MSI RX2400 PRO-TD256EH Catalyst 9.12

RADEON HD2400XT * POWERCOLOR HD2400 XT Catalyst 9.12

256MB DDR3

RADEON HD3450 POWERCOLOR AX3450 Catalyst 9.12

256MD2-S

* Currently, RADEON HD2400XT series graphics cards are only supported with

AMD Phenom CPU. Please visit our website for the future driver update and the

latest information.

What does an ATITM Hybrid CrossFireXTM system include?

An ATITM Hybrid CrossFireXTM system includes an ATITM RadeonTM 2400 or ATITM

RadeonTM 3450 series graphics processor and a motherboard based on an AMD

785G integrated chipset, all operating in a Windows® VistaTM / 7 environment. Please

refer to below PCI Express graphics card support list for ATITM Hybrid CrossFireXTM.

For the future update of more compatible PCI Express graphics cards, please visit

our website for further information.

ATI Catalyst Control Center

EnglishEnglish

English

1818

18 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

* Hybrid CrossFireXTM appearing here is a registered trademark of ATITM Technologies Inc.,

and is used only for identification or explanation and to the owners’ benefit, without intent to

infringe.

* For further information of ATITM Hybrid CrossFireXTM technology, please check AMD website

for up dates and details.

Step 7. Double-click “ATI Catalyst Control Center”. Click “View”, click “CrossFireTM”,

and then select the option “Enable CrossFireTM”.

View

CrossFireTM Enable CrossFireTM

Step 8. Click “Yes” to continue.

Step 9. Click “OK” to save your change.

Step 10. Reboot your system. Then you can freely enjoy the benefit of HybridTM

CrossFireXTM feature.

EnglishEnglish

English

1919

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

OpenShort

Clear CMOSDefault

2.72.7

2.7 Jumpers SetupJumpers Setup

Jumpers SetupJumpers Setup

Jumpers Setup

The illustration shows how jumpers are setup.

When the jumper cap is placed on pins, the

jumper is “Short”. If no jumper cap is placed on

pins, the jumper is “Open”. The illustration

shows a 3-pin jumper whose pin1 and

pin2 are “Short” when jumper cap is placed on

these 2 pins.

Jumper Setting

PS2_USB_PW1 Short pin2, pin3 to enable

(see p.2, No. 1) +5VSB (standby) for PS/2 or

USB wake up events.

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

Clear CMOS Jumper

(CLRCMOS1)

(see p.2, No. 9)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer and unplug the power cord from the power supply.

After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1

for 5 seconds. However, please do not clear the CMOS right after you update the

BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you

must boot up the system first, and then shut it down before you do the clear-

CMOS action.

EnglishEnglish

English

2020

20 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

2.8 Onboard Headers and Connectors2.8 Onboard Headers and Connectors

2.8 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

•

Floppy Connector

(33-pin FLOPPY1)

(see p.2 No. 21)

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

Primary IDE connector (Blue)

(39-pin IDE1, see p.2 No. 10)

Note: Please refer to the instruction of your IDE device vendor for the details.

Serial ATAII Connectors These four Serial ATAII (SATAII)

(SATAII_1 (PORT 0): connectors support SATAII

see p.2, No. 17) or SATA hard disk for internal

(SATAII_2 (PORT 1): storage devices. The current

see p.2, No. 16) SATAII interface allows up to

(SATAII_3 (PORT 2): 3.0 Gb/s data transfer rate.

see p.2, No. 13)

(SATAII_4 (PORT 3):

see p.2, No. 14)

connect the black end

to the IDE devices

connect the blue end

to the motherboard

80-conductor ATA 66/100/133 cable

the red-striped side to Pin1

Serial ATA (SATA) Either end of the SATA data cable

Data Cable can be connected to the SATA /

(Optional) SATAII hard disk or the SATAII

connector on this motherboard.

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

2121

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Front Panel Audio Header This is an interface for the front

(9-pin HD_AUDIO1) panel audio cable that allows

(see p.2, No. 23) convenient connection and

control of audio devices.

USB 2.0 Headers Besides four default USB 2.0

(9-pin USB6_7) ports on the I/O panel, there are

(see p.2 No. 19) two USB 2.0 headers on this

motherboard. Each USB 2.0

header cansupport two USB

2.0 ports.

(9-pin USB4_5)

(see p.2 No. 18)

Print Port Header This is an interface for print

(25-pin LPT1) port cable that allows

(see p.2 No. 22) convenient connection of printer

devices.

1. High Definition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. To activate the front mic.

For Windows® XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”.

For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:

Go to the "FrontMic" Tab in the Realtek Control panel. Adjust

“Recording Volume”.

EnglishEnglish

English

2222

22 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

CPU Fan Connector Please connect the CPU fan

(4-pin CPU_FAN1) cable to this connector and

(see p.2 No. 6) match the black wire to the

ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

3-Pin Fan Installation

Pin 1-3 Connected

System Panel Header This header accommodates

(9-pin PANEL1) several system front panel

(see p.2 No. 15) functions.

Chassis Speaker Header Please connect the chassis

(4-pin SPEAKER 1) speaker to this header.

(see p.2 No. 8)

Chassis and Power Fan Connectors Please connect the fan cables

(3-pin CHA_FAN1) to the fan connectors and

(see p.2 No. 20) match the black wire to the

(3-pin PWR_FAN1)

(see p.2 No. 28)

20-Pin ATX Power Supply Installation

Though this motherboard provides 24-pin ATX power connector,

it can still work if you adopt a traditional 20-pin ATX power supply.

To use the 20-pin ATX power supply, please plug your power

supply along with Pin 1 and Pin 13.

ATX Power Connector Please connect an ATX power

(24-pin ATXPWR1) supply to this connector.

(see p.2 No. 7)

2323

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2.92.9

2.9 Driver Installation GuideDriver Installation Guide

Driver Installation GuideDriver Installation Guide

Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive

first. Then, the drivers compatible to your system can be auto-detected and listed on

the support CD driver page. Please follow the order from up to bottom side to install

those required drivers. Therefore, the drivers you install can work properly.

2.102.10

2.10 Installing WindowsInstalling Windows

Installing WindowsInstalling Windows

Installing Windows®®

®®

® 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista

7 / 7 64-bit / Vista 7 / 7 64-bit / Vista

7 / 7 64-bit / VistaTM TM

TM TM

TM //

VistaVista

VistaTMTM

TMTM

TM 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions

64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions

64-bit / XP / XP 64-bit With RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit on

your SATA / SATAII HDDs with RAID functions, please refer to the document at the

following path in the Support CD for detailed procedures:

..\ RAID Installation Guide

ATX 12V Power Connector Please connect an ATX 12V

(4-pin ATX12V1) power supply to this connector.

(see p.2 No. 2)

2.112.11

2.11 Installing WindowsInstalling Windows

Installing WindowsInstalling Windows

Installing Windows®®

®®

® 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista

7 / 7 64-bit / Vista 7 / 7 64-bit / Vista

7 / 7 64-bit / VistaTMTM

TMTM

TM / /

/ /

VistaVista

VistaTMTM

TMTM

TM 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions

64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions

64-bit / XP / XP 64-bit Without RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit OS

on your SATA / SATAII HDDs without RAID functions, please follow below procedures

according to the OS you install.

2.11.1 Installing Windows2.11.1 Installing Windows

2.11.1 Installing Windows®®

®®

® XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID

XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID

XP / XP 64-bit Without RAID

F F

Functionsunctions

unctionsunctions

unctions

If you want to install Windows® XP / XP 64-bit on your SATA / SATAII HDDs without RAID

functions, please follow below steps.

Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode)

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen Storage

Configuration.

B. Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows® XP / XP 64-bit OS on your system.

EnglishEnglish

English

2424

24 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EnglishEnglish

English

2.11.2 Installing Windows2.11.2 Installing Windows

2.11.2 Installing Windows®®

®®

® 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista

7 / 7 64-bit / Vista 7 / 7 64-bit / Vista

7 / 7 64-bit / VistaTMTM

TMTM

TM / /

/ /

Vista Vista

VistaTMTM

TMTM

TM 64-bit W 64-bit W

64-bit W 64-bit W

64-bit Without RAID Fithout RAID F

ithout RAID Fithout RAID F

ithout RAID Functionsunctions

unctionsunctions

unctions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit on your SATA /

SATAII HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs with NCQ and Hot Plug functions (AHCI mode)

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen Storage

Configuration.

B. Set the “SATA Operation Mode” option to [AHCI].

STEP 2: Install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS on your

system.

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen Storage

Configuration.

B. Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS on your

system.

Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode)

2.122.12

2.12 Untied Overclocking TUntied Overclocking T

Untied Overclocking TUntied Overclocking T

Untied Overclocking Technologyechnology

echnologyechnology

echnology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS

setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied

during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can

operate under a more stable overclocking environment.

Please refer to the warning on page 8 for the possible overclocking risk

before you apply Untied Overclocking Technology.

2525

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

3. BIOS Information3. BIOS Information

3. BIOS Information

The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up

the computer, please press <F2> during the Power-On-Self-Test (POST) to enter

BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to

enter BIOS Setup after POST, please restart the system by pressing <Ctl> + <Alt> +

<Delete>, or pressing the reset button on the system chassis. The BIOS Setup

program is designed to be user-friendly. It is a menu-driven program, which allows

you to scroll through its various sub-menus and to select among the predetermined

choices. For the detailed information about BIOS Setup, please refer to the User

Manual (PDF file) contained in the Support CD.

4. Sof4. Sof

4. Software Supportware Suppor

tware Supportware Suppor

tware Support CD informationt CD information

t CD informationt CD information

t CD information

This motherboard supports various Microsoft® Windows® operating systems: 7 / 7

64-bit / VistaTM / VistaTM 64-bit / XP / XP Media Center / XP 64-bit. The Support CD that

came with the motherboard contains necessary drivers and useful utilities that will

enhance motherboard features. To begin using the Support CD, insert the CD into

your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is

enabled in your computer. If the Main Menu does not appear automatically, locate and

double-click on the file “ASSETUP.EXE” from the “BIN” folder in the Support CD to

display the menus.

EnglishEnglish

English

2626

26 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

DeutschDeutsch

Deutsch

1. Einführung1. Einführung

1. Einführung

Wir danken Ihnen für den Kauf des ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard,

ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen

von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design,

gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.

Diese Schnellinstallationsanleitung führt in das Motherboard und die schrittweise

Installation ein. Details über das Motherboard finden Sie in der

Bedienungsanleitung auf der Support-CD.

Da sich Motherboard-Spezifikationen und BIOS-Software verändern

können, kann der Inhalt dieses Handbuches ebenfalls jederzeit geändert

werden. Für den Fall, dass sich Änderungen an diesem Handbuch

ergeben, wird eine neue Version auf der ASRock-Website, ohne weitere

Ankündigung, verfügbar sein. Die neuesten Grafikkarten und unterstützten

CPUs sind auch auf der ASRock-Website aufgelistet.

ASRock-Website: http://www.asrock.com

Wenn Sie technische Unterstützung zu Ihrem Motherboard oder spezifische

Informationen zu Ihrem Modell benötigen, besuchen Sie bitte unsere

Webseite:

www.asrock.com/support/index.asp

1.1 Kartoninhalt

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

(Micro ATX-Formfaktor: 24.4 cm x 18.3 cm; 9.6 Zoll x 7.2 Zoll)

ASRock 985GM-GS3 FX / 985GM-S3 FX Schnellinstallationsanleitung

ASRock 985GM-GS3 FX / 985GM-S3 FX Support-CD

Zwei Seriell-ATA- (SATA) Datenkabel (Option)

Ein I/O Shield

2727

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1.21.2

1.2 SpezifikationenSpezifikationen

SpezifikationenSpezifikationen

Spezifikationen

Plattform - Micro ATX-Formfaktor: 24.4 cm x 18.3 cm; 9.6 Zoll x 7.2 Zoll

- Festkondensator für CPU-Leistung

CPU - Unterstützung von Socket AM3+-Prozessoren

- Unterstützung von Socket AM3-Prozessoren: AMD PhenomTM

II X6 / X4 / X3 / X2 (außer 920 / 940) / Athlon X4 / X3 / X2 /

Sempron-Prozessor

- Acht-Kern-CPU-bereit

- Unterstützt AMD OverDriveTM mit ACC-Funktion (Advanced

Clock Calibration, Erweiterte Taktkalibrierung)

- AMD LIVE!TM-bereit

- Unterstützt Cool ‘n’ QuietTM-Technologie von AMD

- FSB 2600 MHz (5.2 GT/s)

- Unterstützt Untied-Übertaktungstechnologie

(siehe VORSICHT 1)

- Unterstützt Hyper-Transport- 3.0 Technologie (HT 3.0)

Chipsatz - Northbridge: AMD 785G

- Southbridge: AMD 710

Speicher - Unterstützung von Dual-Kanal-Speichertechnologie

(siehe VORSICHT 2)

- 2 x Steckplätze für DDR3

- Unterstützt DDR3 1800(OC)/1600(OC)/1333/1066/800

non-ECC, ungepufferter Speicher (siehe VORSICHT 3)

- Max. Kapazität des Systemspeichers: 8GB

(siehe VORSICHT 4)

Erweiterungs- - 1 x PCI Express 2.0 x16-Steckplatz (blau für x16-Modus)

steckplätze - 1 x PCI Express 2.0 x1-Steckplatz

- 2 x PCI -Steckplätze

- Unterstützt AMD Hybrid CrossFireXTM

Onboard-VGA - Integrierte AMD Radeon HD 4200-Grafik

- DX10.1 Klasse iGPU, Pixel Shader 4.1

- Maximal gemeinsam genutzter Speicher 512 MB

(siehe VORSICHT 5)

- Unterstützt D-Sub mit einer maximalen Auflösung von

2048 x 1536 bei 60 Hz

Audio - 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN - 985GM-GS3 FX

Realtek PCIE x1 Gigabit LAN RTL8111E,

speed 10/100/1000 Mb/s

DeutschDeutsch

Deutsch

2828

28 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

DeutschDeutsch

Deutsch

- 985GM-S3 FX

Realtek PCIEx1 LAN 8105EL, speed 10/100 Mb/s

- Unterstützt Wake-On-LAN

- Unterstützt PXE

E/A-Anschlüsse I/O Panel

an der - 1 x PS/2 Mouse Port

Rückseite - 1 x PS/2 Keyboard Port

- 1 x Serieller port: COM 1

- 1 x VGA Port

- 4 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED)

- Audioanschlüsse: Line In / Line Out / Mikrofon

Anschlüsse - 4 x SATA2-Anschlüsse, unterstützt bis 3.0 Gb/s

Datenübertragungsrate, unterstützt RAID (RAID 0, RAID 1,

RAID 10 und JBOD), NCQ, AHCI und “Hot Plug” Funktionen

(siehe VORSICHT 6)

- 1 x ATA133 IDE-Anschlüsse (Unterstützt bis 2 IDE-Geräte)

- 1 x FDD-Anschlüsse

- 1 x Druckerport-Anschlussleiste

- CPU/Gehäuse/Strom-Lüfteranschluss

- 24-pin ATX-Netz-Header

- 4-pin anschluss für 12V-ATX-Netzteil

- Anschluss für Audio auf der Gehäusevorderseite

- 2 x USB 2.0-Anschlüsse (Unterstützung 4 zusätzlicher

USB 2.0-Anschlüsse)

BIOS - 8Mb AMI BIOS

- AMI legal BIOS mit Unterstützung für “Plug and Play”

- ACPI 1.1-Weckfunktionen

- JumperFree-Modus

- SMBIOS 2.3.1

- CPU, VCCM, NB Stromspannung Multianpassung

Support-CD - Treiber, Dienstprogramme, Antivirussoftware

(Probeversion), CyberLink MediaEspresso 6.5 Trial, Google

Chrome Browser und Toolbar

Einzigartige - ASRock OC Tuner (siehe VORSICHT 7)

Eigenschaft - ASRock Intelligent Energy Saver (Intelligente

Energiesparfunktion) (siehe VORSICHT 8)

- ASRock Sofortstart

- ASRock Instant Flash (siehe VORSICHT 9)

- ASRock OC DNA (siehe VORSICHT 10)

2929

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

WARNUNG

Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden

der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von

Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die

Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems

beschädigen. Es geschieht dann auf eigene Gefahr und auf Ihre Kosten. Wir übernehmen

keine Verantwortung für mögliche Schäden, die aufgrund von Overclocking verursacht

wurden.

VORSICHT!

1. Dieses Motherboard unterstützt die Untied-Übertaktungstechnologie.

Unter “Entkoppelte Übertaktungstechnologie” auf Seite 24 finden Sie

detaillierte Informationen.

2. Dieses Motherboard unterstützt Dual-Kanal-Speichertechnologie. Vor

Implementierung der Dual-Kanal-Speichertechnologie müssen Sie die

Installationsanleitung für die Speichermodule auf Seite 13 zwecks richtiger

Installation gelesen haben.

3. Ob die Speichergeschwindigkeit 1800/1600 MHz unterstützt wird, hängt

von der von Ihnen eingesetzten AM3/AM3+-CPU ab. Schauen Sie bitte

auf unseren Internetseiten in der Liste mit unterstützten

- ASRock APP Charger (siehe VORSICHT 11)

- ASRock XFast USB (siehe VORSICHT 12)

- ASRock XFast LAN (siehe VORSICHT 13)

- Hybrid Booster:

- Schrittloser CPU-Frequenz-Kontrolle

(siehe VORSICHT 14)

- ASRock U-COP (siehe VORSICHT 15)

- Boot Failure Guard (B.F.G. – Systemstartfehlerschutz)

Hardware Monitor - CPU-Temperatursensor

- Motherboardtemperaturerkennung

- Drehzahlmessung für CPU/Gehäuse/Stromlüfter

- CPU-Lüftergeräuschdämpfung

- Spannungsüberwachung: +12V, +5V, +3.3V, Vcore

Betriebssysteme - Unterstützt Microsoft® Windows® 7 / 7 64-Bit / VistaTM /

VistaTM 64-Bit / XP / XP Media Center / XP 64-Bit

Zertifizierungen - FCC, CE, WHQL

- Gemäß Ökodesign-Richtlinie (ErP/EuP) (Stromversorgung

gemäß Ökodesign-Richtlinie (ErP/EuP) erforderlich)

(siehe VORSICHT 16)

* Für die ausführliche Produktinformation, besuchen Sie bitte unsere Website:

http://www.asrock.com

DeutschDeutsch

Deutsch

3030

30 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

DeutschDeutsch

Deutsch

Speichermodulen nach, wenn Sie DDR3 1800/1600-Speichermodule

einsetzen möchten.

ASRock-Internetseite: http://www.asrock.com

4. Durch Betriebssystem-Einschränkungen kann die tatsächliche

Speichergröße weniger als 4 GB betragen, da unter Windows® 7 / Vista™

/ XP etwas Speicher zur Nutzung durch das System reserviert wird.

Unter Windows® OS mit 64-Bit-CPU besteht diese Einschränkung nicht.

5. Die Maximalspeichergröße ist von den Chipshändler definiert und

umgetauscht. Bitte überprüfen Sie AMD website für die neuliche

Information.

6. Vor Installation der SATAII-Festplatte an den SATAII-Anschluss lesen

Sie bitte “Setup-Anleitung für SATAII-Festplatte” auf Seite 27 der

“Bedienungsanleitung” auf der Support-CD, um Ihre SATAII-Festplatte

dem SATAII-Modus anzugleichen. Sie können die SATA-Festplatte

auch direkt mit dem SATAII-Anschluss verbinden.

7. Es ist ein benutzerfreundlicher ASRock Übertaktenswerkzeug, das

erlaubt, dass Sie Ihr System durch den Hardware-Monitor Funktion zu

überblicken und Ihre Hardware-Geräte übertakten, um die beste

Systemleistung unter der Windows® Umgebung zu erreichen. Besuchen

Sie bitte unsere Website für die Operationsverfahren von ASRock OC

Tuner. ASRock-Website: http://www.asrock.com

8. Mit einer eigenen, modernen Hardware und speziellem Softwaredesign,

bietet der Intelligent Energy Saver eine revolutionäre Technologie zur

bisher unerreichten Energieeinsparung. Ein Spannungsregler kann die

Anzahl von Ausgangsphasen zur Effektivitätsverbessserung reduzieren,

wenn sich die CPU im Leerlauf befindet. Mit anderen Worten: Sie

genießen außergewöhnliche Energieeinsparung und verbesserten

Wirkungsgrad ohne Leistungseinschränkungen. Wenn Sie die Intelligent

Energy Saver-Funktion nutzen möchten, aktivieren Sie zuvor die „Cool

‘n’ Quiet“-Option im BIOS. Weitere Bedienungshinweise zum Intelligent

Energy Saver finden Sie auf unseren Internetseiten.

ASRock-Internetseite: http://www.asrock.com

9. ASRock Instant Flash ist ein im Flash-ROM eingebettetes BIOS-Flash-

Programm. Mithilfe dieses praktischen BIOS-Aktualisierungswerkzeugs

können Sie das System-BIOS aktualisieren, ohne dafür zuerst

Betriebssysteme wie MS-DOS oder Windows® aufrufen zu müssen. Mit

diesem Programm bekommen Sie durch Drücken der <F6>-Taste

während des POST-Vorgangs oder durch Drücken der <F2>-Taste im

BIOS-Setup-Menü Zugang zu ASRock Instant Flash. Sie brauchen dieses

Werkzeug einfach nur zu starten und die neue BIOS-Datei auf Ihrem

USB-Flash-Laufwerk, Diskettenlaufwerk oder der Festplatte zu

speichern, und schon können Sie Ihr BIOS mit nur wenigen

Klickvorgängen ohne Bereitstellung einer zusätzlichen Diskette oder

eines anderen komplizierten Flash-Programms aktualisieren. Achten Sie

darauf, dass das USB-Flash-Laufwerk oder die Festplatte das

Dateisystem FAT32/16/12 benutzen muss.

3131

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

10. Allein der Name – OC DNA* – beschreibt es wörtlich, was die

Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv

entwickeltes Dienstprogramm, das Nutzern eine bequeme

Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie

Anderen mitzuteilen. Es hilft Ihnen, Ihre Übertaktungsaufzeichnung im

Betriebssystem zu speichern und vereinfacht den komplizierten

Aufzeichnungsvorgang von Übertaktungseinstellungen. Mit OC DNA

können Sie Ihre Übertaktungseinstellungen als Profil abspeichern

und Ihren Freunden zugänglich machen! Ihre Freunde können dann

das Übertaktungsprofil auf ihren eigenen Systemen laden, um

dieselben Übertaktungseinstellungen. Mit OC DNA können Sie Ihre

Übertaktungseinstellungen als Profil abspeichern und Ihren Freunden

zugänglich machen! Ihre Freunde können dann das Übertaktungsprofil

auf ihren eigenen Systemen laden, um dieselben

Übertaktungseinstellungen wie Sie zu erhalten! Beachten Sie bitte,

dass das Übertaktungsprofil nur bei einem identischen Motherboard

gemeinsam genutzt und funktionsfähig gemacht werden kann.

Übertaktungseinstellungen wie Sie zu erhalten! Beachten Sie bitte, dass

das Übertaktungsprofil nur bei einem identischen Motherboard

gemeinsam genutzt und funktionsfähig gemacht werden kann.

11. Wenn Sie nach einer schnelleren, weniger eingeschränkten

Möglichkeit zur Aufladung Ihrer Apple-Geräte (z. B. iPhone/iPad/iPod

touch) suchen, bietet ASRock Ihnen eine wunderbare Lösung – den

ASRock APP Charger. Installieren Sie einfach den ASRock APP

Charger-Treiber; dadurch lädt sich Ihr iPhone wesentlich schneller

über einen Computer auf – genaugenommen bis zu 40 % schneller

als zuvor. Der ASRock APP Charger ermöglicht Ihnen die schnelle

Aufladung mehrerer Apple-Geräte gleichzeitig; der Ladevorgang wird

sogar dann fortgesetzt, wenn der PC den Ruhezustand (S1),

Suspend to RAM-Modus (S3) oder Tiefschlafmodus (S4) aufruft oder

ausgeschaltet wird (S5). Nach der Installation des APP Charger-

Treibers können Sie im Handumdrehen das großartigste

Ladeerlebnis überhaupt genießen.

ASRock-Webseite: http://www.asrock.com/Feature/AppCharger/index.

asp

DeutschDeutsch

Deutsch

3232

32 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

DeutschDeutsch

Deutsch

12. ASRocks XFast USB dient der Steigerung der Leistungsfähigkeit Ihrer

USB-Speichergeräte. Die Leistung kann je nach Eigenschaften des

Gerätes variieren.

13. ASRock XFast LAN bietet einen schnelleren Internetzugang mit den

nachfolgenden Vorteilen. LAN-Anwendungspriorisierung: Hiermit kon-

fi gurieren Sie auf ideale Weise Ihre Anwendungsprioritat und/oder

fugen neue Programme hinzu. Niedrigere Latenzzeit bei Spielen: Nach

Einstel-lung einer hoheren Online-Gameprioritat kann hiermit die

Latenzzeit bei Spielen herabgesetzt werden.

Datenverkehrsgestaltung: Sie konnen Youtube-Videos in HD anzeigen

und gleichzeitig Dateien herunterladen. Echtzeitanalyse Ihrer Daten:

Uber das Statusfenster konnen Sie schnell ermitteln, welche

Datenstrome zur Zeit ubertragen werden.

14. Obwohl dieses Motherboard stufenlose Steuerung bietet, wird

Overclocking nicht empfohlen. Frequenzen, die von den empfohlenen

CPU-Busfrequenzen abweichen, können Instabilität des Systems

verursachen oder die CPU beschädigen.

15. Wird eine Überhitzung der CPU registriert, führt das System einen

automatischen Shutdown durch. Bevor Sie das System neu starten,

prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert,

und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein.

Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas

Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.

16. EuP steht für Energy Using Product und kennzeichnet die Ökodesign-

Richtlinie, die von der Europäischen Gemeinschaft zur Festlegung des

Energieverbrauchs von vollständigen Systemen in Kraft gesetzt wurde.

Gemäß dieser Ökodesign-Richtlinie (EuP) muss der gesamte

Netzstromverbrauch von vollständigen Systemen unter 1,00 Watt liegen,

wenn sie ausgeschaltet sind. Um dem EuP-Standard zu entsprechen,

sind ein EuP-fähiges Motherboard und eine EuP-fähige

Stromversorgung erforderlich. Gemäß einer Empfehlung von Intel muss

eine EuP-fähige Stromversorgung dem Standard entsprechen, was

bedeutet, dass bei einem Stromverbrauch von 100 mA die 5-Volt-

Standby-Energieeffizienz höher als 50% sein sollte. Für die Wahl einer

EuP-fähigen Stromversorgung empfehlen wir Ihnen, weitere Details

beim Hersteller der Stromversorgung abzufragen.

3333

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1.3 Einstellung der Jumper1.3 Einstellung der Jumper

1.3 Einstellung der Jumper

Die Abbildung verdeutlicht, wie Jumper

gesetzt werden. Werden Pins durch

Jumperkappen verdeckt, ist der Jumper

“gebrückt”. Werden keine Pins durch

Jumperkappen verdeckt, ist der Jumper

“offen”. Die Abbildung zeigt einen 3-Pin

Jumper dessen Pin1 und Pin2 “gebrückt” sind,

bzw. es befindet sich eine Jumper-Kappe

auf diesen beiden Pins.

Jumper Einstellun

PS2_USB_PW1 Überbrücken Sie Pin2, Pin3, um

(siehe S.2, No. 1) +5VSB (Standby) zu setzen

und die PS/2 oder USB-

Weckfunktionen zu aktivieren.

Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A

oder mehr leisten können.

Gebrückt Offen

CMOS löschen

(CLRCMOS1, 3-Pin jumper)

(siehe S.2, No. 9)

Hinweis: CLRCMOS1 erlaubt Ihnen das Löschen der CMOS-Daten. Diese beinhalten

das System-Passwort, Datum, Zeit und die verschiedenen BIOS-Parameter.

Um die Systemparameter zu löschen und auf die Werkseinstellung

zurückzusetzen, schalten Sie bitte den Computer ab und entfernen das

Stromkabel. Benutzen Sie eine Jumperkappe, um die Pin 2 und Pin 3 an

CLRCMOS1 für 5 Sekunden kurzzuschließen. Bitte vergessen Sie nicht,

den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde. Bitte

vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS

gelöscht wurde. Wenn Sie den CMOS-Inhalt gleich nach dem Aktualisieren

des BIOS löschen müssen, müssen Sie zuerst das System starten und

dann wieder ausschalten, bevor Sie den CMOS-Inhalt löschen.

CMOS

löschen

Default-

Einstellung

DeutschDeutsch

Deutsch

3434

34 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

DeutschDeutsch

Deutsch

Diese vier Serial ATA

(SATA II) -Anschlüsse

unterstützen interne SATA-

oder SATA II-Festplatten. Die

aktuelle SATAII-Schnittstelle

ermöglicht eine

Datenübertragungsrate bis

3,0 Gb/s.

Seriell-ATAII-Anschlüsse

(SATAII_1 (PORT 0):

siehe S.2, No. 17)

(SATAII_2 (PORT 1):

siehe S.2, No. 16)

(SATAII_3 (PORT 2):

siehe S.2, No. 13)

(SATAII_4 (PORT 3):

siehe S.2, No. 14)

die rotgestreifte Seite auf Stift 1

1.4 Anschlüsse1.4 Anschlüsse

1.4 Anschlüsse

Anschlussleisten sind KEINE Jumper. Setzen Sie KEINE Jumperkappen

auf die Pins der Anschlussleisten. Wenn Sie die Jumperkappen auf die

Anschlüsse setzen, wird das Motherboard permanent beschädigt!

Anschluss Beschreibung

Anschluss für das

Floppy-Laufwerk

(33-Pin FLOPPY1)

(siehe S.2, No. 21)

Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1-

Seite des Anschlusses verbunden wird.

Primärer IDE-Anschluss (blau)

(39-pin IDE1, siehe S.2, No. 10)

Blauer Anschluss Schwarzer Anschluss

zum Motherboard zur Festplatte

80-adriges ATA 66/100/133 Kabel

Hinweis: Details entnehmen Sie bitte den Anweisungen Ihres IDE-Gerätehändlers.

Serial ATA- (SATA-) SJedes Ende des SATA

Datenkabel Datenkabels kann an die SATA

(Option) / SATAII Festplatte oder das

SATAII Verbindungsstück auf

dieser Hauptplatine

angeschlossen werden.

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

3535

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

USB 2.0-Header Zusätzlich zu den vier

(9-pol. USB6_7) üblichen USB 2.0-Ports an den

(siehe S.2 - No. 19) I/O-Anschlüssen befinden sich

zwei USB 2.0-Anschlussleisten

am Motherboard. Pro USB 2.0-

Anschlussleiste werden zwei

(9-pol. USB4_5) USB 2.0-Ports unterstützt.

(siehe S.2 - No. 18)

Anschluss für Audio auf Dieses Interface zu einem

der Gehäusevorderseite Audio-Panel auf der Vorderseite

(9-Pin HD_AUDIO1) Ihres Gehäuses, ermöglicht

(siehe S.2, No. 23) Ihnen eine bequeme

Kontrolle über Audio-Geräte.

Druckerport-Anschlussleiste Dies ist eine Schnittstelle zum

(25-pol. LPT1) Anschluss eines Druckerport-

(siehe S.2 - No. 22) Kabels, mit dem Sie passende

Drucker auf einfache Weise

anschließen können.

1. High Definition Audio unterstützt Jack Sensing (automatische Erkennung

falsch angeschlossener Geräte), wobei jedoch die Bildschirmverdrahtung

am Gehäuse HDA unterstützen muss, um richtig zu funktionieren.

Beachten Sie bei der Installation im System die Anweisungen in unserem

Handbuch und im Gehäusehandbuch.

2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie

nachstehend beschrieben an der Front-Audioanschlussleiste:

A. Schließen Sie Mic_IN (MIC) an MIC2_L an.

B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an

OUT2_L an.

C. Schließen Sie Ground (GND) an Ground (GND) an.

D. MIC_RET und OUT_RET sind nur für den HD-Audioanschluss

gedacht. Diese Anschlüsse müssen nicht an die AC’97-Audioleiste

angeschlossen werden.

E. So aktivieren Sie das Mikrofon an der Vorderseite.

DeutschDeutsch

Deutsch

3636

36 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

DeutschDeutsch

Deutsch

CPU-Lüfteranschluss Verbinden Sie das CPU -

(4-pin CPU_FAN1) Lüfterkabel mit diesem

(siehe S.2, No. 6) Anschluss und passen Sie den

schwarzen Draht dem

Erdungsstift an.

Gehäuselautsprecher-Header Schließen Sie den

(4-pin SPEAKER1) Gehäuselautsprecher an

(siehe S.2, No. 8) diesen Header an.

System Panel Anschluss Dieser Anschluss ist für die

(9-Pin PANEL1) verschiedenen Funktionen der

(siehe S.2, No. 15) Gehäusefront.

Bei den Betriebssystemen Windows® XP / XP 64 Bit:

Wählen Sie „Mixer“. Wählen Sie „Recorder“ (Rekorder). Klicken Sie dann

auf „FrontMic“ (Vorderes Mikrofon).

Bei den Betriebssystemen Windows® 7 / 7 64 Bit / VistaTM / VistaTM 64 Bit:

Wählen Sie im Realtek-Bedienfeld die „FrontMic“ (Vorderes Mikrofon)-

Registerkarte. Passen Sie die „Recording Volume“ (Aufnahmelautstärke)

an.

Gehäuse- und Stromlüfteranschlüsse Verbinden Sie die Lüfterkabel

(3-pin CHA_FAN1) mit den Lüfteranschlüssen,

(siehe S.2, No. 20) wobei der schwarze Draht an

den Schutzleiterstift

(3-pin PWR_FAN1) angeschlossenwird.

(siehe S.2, No. 28)

Obwohl dieses Motherboard einen vierpoligen CPU-Lüfteranschluss (Quiet

Fan) bietet, können auch CPU-Lüfter mit dreipoligem Anschluss

angeschlossen werden; auch ohne Geschwindigkeitsregulierung. Wenn Sie

einen dreipoligen CPU-Lüfter an den CPU-Lüferanschluss dieses

Motherboards anschließen möchten, verbinden Sie ihn bitte mit

den Pins 1 – 3. Pins 1–3 anschließen

Lüfter mit dreipoligem Anschluss installieren

3737

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss

bietet, kann es auch mit einem modifizierten traditionellen 20-pol.

ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu

verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein.

ATX-Netz-Header Verbinden Sie die ATX-

(24-pin ATXPWR1) Stromversorgung mit diesem

(siehe S.2, No. 7) Header.

Installation eines 20-pol. ATX-Netzteils

Anschluss für Beachten Sie bitte, dass Sie eine

12V-ATX-Netzteil Stromversorgung mit ATX 12-

(4-pin ATX12V1) Volt-Stecker mit diesem

(siehe S.2, No. 2) Anschluss verbinden müssen,

damit ausreichend Strom

geliefert werden kann.

Andernfalls reicht der Strom

nicht aus, das System zu starten.

DeutschDeutsch

Deutsch

3838

38 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2. BIOS-Information2. BIOS-Information

2. BIOS-Information

Das Flash Memory dieses Motherboards speichert das Setup-Utility. Drücken Sie

<F2> während des POST (Power-On-Self-Test) um ins Setup zu gelangen, ansonsten

werden die Testroutinen weiter abgearbeitet. Wenn Sie ins Setup gelangen wollen,

nachdem der POST durchgeführt wurde, müssen Sie das System über die

Tastenkombination <Ctrl> + <Alt> + <Delete> oder den Reset-Knopf auf der

Gehäusevorderseite, neu starten. Natürlich können Sie einen Neustart auch

durchführen, indem Sie das System kurz ab- und danach wieder anschalten.

Das Setup-Programm ist für eine bequeme Bedienung entwickelt worden. Es ist

ein menügesteuertes Programm, in dem Sie durch unterschiedliche Untermenüs

scrollen und die vorab festgelegten Optionen auswählen können. Für detaillierte

Informationen zum BIOS-Setup, siehe bitte das Benutzerhandbuch (PDF Datei) auf

der Support CD.

3. Software Support CD information3. Software Support CD information

3. Software Support CD information

Dieses Motherboard unterstützt eine Reiche von Microsoft® Windows®

Betriebssystemen: 7 / 7 64-Bit / VistaTM / VistaTM 64-Bit / XP / XP Media Center / XP

64-Bit. Die Ihrem Motherboard beigefügte Support-CD enthält hilfreiche Software,

Treiber und Hilfsprogramme, mit denen Sie die Funktionen Ihres Motherboards

verbessern können Legen Sie die Support-CD zunächst in Ihr CD-ROM-Laufwerk

ein. Der Willkommensbildschirm mit den Installationsmenüs der CD wird

automatisch aufgerufen, wenn Sie die “Autorun”-Funktion Ihres Systems aktiviert

haben. Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf

das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs

aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es

ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre

Auswahl treffen und die Programme werden dann automatisch installiert.

DeutschDeutsch

Deutsch

3939

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1. Introduction1. Introduction

1. Introduction

Merci pour votre achat d’une carte mère ASRock 985GM-GS3 FX / 985GM-S3 FX une

carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle

offre des performances excellentes et une conception robuste conformément à

l’engagement d’ASRock sur la qualité et la fiabilité au long terme.

Ce Guide d’installation rapide présente la carte mère et constitue un guide

d’installation pas à pas. Des informations plus détaillées concernant la carte mère

pourront être trouvées dans le manuel l’utilisateur qui se trouve sur le CD

d’assistance.

Les spécifications de la carte mère et le BIOS ayant pu être mis à

jour, le contenu de ce manuel est sujet à des changements sans

notification. Au cas où n’importe qu’elle modification intervenait sur ce

manuel, la version mise à jour serait disponible sur le site web

ASRock sans nouvel avis. Vous trouverez les listes de prise en

charge des cartes VGA et CPU également sur le site Web ASRock.

Site web ASRock, http://www.asrock.com

Si vous avez besoin de support technique en relation avec cette carte

mère, veuillez consulter notre site Web pour de plus amples

informations particulières au modèle que vous utilisez.

www.asrock.com/support/index.asp

1.11.1

1.1 Contenu du paquetContenu du paquet

Contenu du paquetContenu du paquet

Contenu du paquet

Carte mère ASRock 985GM-GS3 FX / 985GM-S3 FX

(Facteur de forme Micro ATX: 9.6 pouces x 7.2 pouces, 24.4 cm x 18.3 cm)

Guide d’installation rapide ASRock 985GM-GS3 FX / 985GM-S3 FX

CD de soutien ASRock 985GM-GS3 FX / 985GM-S3 FX

Deux câble de données Serial ATA (SATA) (Optionnelle)

Un écran I/O

FranFran

Françaisçais

çaisçais

çais

4040

40 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

FrançaisFrançais

Français

1.21.2

1.2 SpécificationsSpécifications

SpécificationsSpécifications

Spécifications

Format - Facteur de forme Micro ATX:

9.6 pouces x 7.2 pouces, 24.4 cm x 18.3 cm

- Condensateur résistant pour alimentation de processeur

CPU - Prise en charge des processeurs sur socket AM3+

- Prise en charge des processeurs sur socket AM3: Processeur

PhenomTM II X6 / X4 / X3 / X2 (sauf 920 / 940) / Athlon II X4 / X3

/ X2 / Sempron d’AMD

- Prêt pour processeurs Huit-Core

- Prise en charge d’AMD OverDriveTM avec fonction ACC

(Advanced Clock Calibration ou calibrage d’horloge avancé)

- Prêt AMD LIVE!TM

- Supporte la technologie Cool ‘n’ Quiet™ d’AMD

- FSB 2600 MHz (5.2 GT/s)

- Prend en charge la technologie Untied Overclocking

(voir ATTENTION 1)

- Prise en charge de la technologie Hyper Transport 3.0 (HT 3.0)

Chipsets - Northbridge: AMD 785G

- Southbridge: AMD SB710

Mémoire - Compatible avec la Technologie de Mémoire à Canal Double

(voir ATTENTION 2)

- 2 x slots DIMM DDR3

- Supporter DDR3 /1800(OC)/1600(OC)/1333/1066/800

non-ECC, sans amortissement mémoire

(voir ATTENTION 3)

- Capacité maxi de mémoire système: 8GB

(voir ATTENTION 4)

Slot d’extension - 1 x slot PCI Express 2.0 x16 (bleu @ mode x16)

- 1 x slot PCI Express 2.0 x1

- 2 x slots PCI

- Prend en charge AMD Hybrid CrossFireXTM

VGA sur carte - Graphiques intégrés à l’AMD Radeon HD 4200

- DX10.1 classe iGPU, nuanceur de pixels 4.1

- mémoire partagée max 512MB (voir ATTENTION 5)

- Prend en charge le D-Sub avec une résolution maximale

jusqu’à 2048x1536 @ 60Hz

Audio - 5.1 Son haute définition de CH (codec audio Realtek ALC662)

LAN - 985GM-GS3 FX

Realtek PCIE x1 Gigabit LAN RTL8111E,

vitesse 10/100/1000 Mb/s

4141

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

- 985GM-S3 FX

Realtek PCIEx1 LAN 8105EL, vitesse 10/100 Mb/s

- Support du Wake-On-LAN

- Support du PXE

Panneau arrière I/O Panel

E/S - 1 x port souris PS/2

- 1 x port clavier PS/2

- 1 x port série: COM 1

- 1 x port VGA

- 4 x ports USB 2.0 par défaut

- 1 x port LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE et

LED VITESSE)

- Jack audio: entrée ligne / sortie ligne / microphone

Connecteurs - 4 x connecteurs SATA2, prennent en charge un taux de

transfert de données pouvant aller jusqu’à 3.0Go/s, supporte

RAID (RAID 0, RAID 1, RAID 10 et JBOD), NCQ, AHCI et

“Hot-Plug” (Connexion à chaud) (voir ATTENTION 6)

- 1 x ATA133 IDE connecteurs

(prend en charge jusqu’à 2 périphériques IDE)

- 1 x Port Disquette

- 1 x embase de port d’impression

- Connecteur pour ventilateur de CPU/Châssis/Ventilateur

- br. 24 connecteur d’alimentation ATX

- br. 4 connecteur d’alimentation 12V ATX

- Connecteur audio panneau avant

- 2 x En-tête USB 2.0 (prendre en charge 4 ports USB 2.0

supplémentaires)

BIOS - 8Mb BIOS AMI

- BIOS AMI

- Support du “Plug and Play”

- Compatible pour événements de réveil ACPI 1.1

- Gestion jumperless

- Support SMBIOS 2.3.1

- CPU, VCCM, NB Tension Multi-ajustement

CD d’assistance - Pilotes, utilitaires, logiciel anti-virus (Version d’essai),CyberLink

MediaEspresso 6.5 Trial, Google Chrome Browser et Toolbar

Caractéristique - Tuner ASRock OC (voir ATTENTION 7)

unique - ASRock Économiseur d’énergie intelligent

(voir ATTENTION 8)

- ASRock l'Instant Boot

FranFran

Françaisçais

çaisçais

çais

4242

42 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

FrançaisFrançais

Français

ATTENTION!

1. Cette carte mère prend en charge la technologie Untied Overclocking.

Veuillez lire “La technologie de surcadençage à la volée” à la page 24

pour plus d’informations.

2. Cette carte mère supporte la Technologie de Mémoire à Canal Double.

Avant d’intégrer la Technologie de Mémoire à Canal Double, assurez-

vous de bien lire le guide d’installation des modules mémoire en page 13

pour réaliser une installation correcte.

ATTENTION

Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y

compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou

utiliser des outils de tiers pour l’overclocking. L’overclocking peut affecter la stabilité de

votre système, ou même causer des dommages aux composants et dispositifs de votre

système. Si vous le faites, c’est à vos frais et vos propres risques. Nous ne sommes

pas responsables des dommages possibles causés par l’overclocking.

- ASRock Instant Flash (voir ATTENTION 9)

- ASRock OC DNA (voir ATTENTION 10)

- Chargeur ASRock APP (voir ATTENTION 11)

- ASRock XFast USB (voir ATTENTION 12)

- ASRock XFast LAN (voir ATTENTION 13)

- L’accélérateur hybride:

- Contrôle direct de la fréquence CPU

(voir ATTENTION 14)

- ASRock U-COP (voir ATTENTION 15)

- Garde d’échec au démarrage (B.F.G.)

Surveillance - Contrôle de la température CPU

système - Mesure de température de la carte mère

- Tachéomètre ventilateur CPU/Châssis/Ventilateur

- Ventilateur silencieux d’unité centrale

- Monitoring de la tension: +12V, +5V, +3.3V, Vcore

OS - Microsoft® Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit /

XP / XP Media Center / XP 64-bit

Certifications - FCC, CE, WHQL

- Prêt pour ErP/EuP (alimentation Prêt pour ErP/EuP requise)

(voir ATTENTION 16)

* Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web:

http://www.asrock.com

4343

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

3. La prise en charge de fréquences de mémoire de 1800/1600MHz

dépend du CPU AM3/AM3+ que vous choisissez. Si vous choisissez

des barrettes de mémoire DDR3 1800/1600 sur cette carte mère,

veuillez vous référer à la liste des mémoires prises en charge sur

notre site Web pour connaître barrettes de mémoire compatibles.

Site Web ASRock http://www.asrock.com

4. Du fait des limites du système d’exploitation, la taille mémoire réelle

réservée au système pourra être inférieure à 4 Go sous Windows® 7 /

VistaTM / XP. Avec Windows® OS avec CPU 64 bits, il n’y a pas ce genre

de limitation.

5. La dimension maximum du memoire partage est definie par le vendeur

de jeu de puces et est sujet de changer. Veuillez verifier la AMD website

pour les informations recentes SVP.

6. Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez

lire le Guide « Installation du disque dur SATAII » à la page 27 du

« Manuel de l’utilisateur » qui se trouve sur le CD de support pour

régler votre lecteur de disque dur SATAII au mode SATAII. Vous pouvez

aussi directement connecter le disque dur SATA au connecteur

SATAII.

7. Il s’agit d’un usage facile ASRock overclocking outil qui vous permet de

surveiller votre système en fonction de la monitrice de matériel et

overclocker vos périphériques de matériels pour obtenir les

meilleures performances du système sous environnement

Windows®. S’il vous plaît visitez notre site web pour le

fonctionnement des procédures de Tuner ASRock OC.

ASRock website: http://www.asrock.com

8. Avec une conception matérielle et logicielle propriétaire avancée, Intelli-

gent Energy Saver (L’économiseur d’énergie intelligent) est une technologie

révolutionnaire qui apporte des économies d’énergie sans précédent. Le

régulateur de tension permet de réduire le nombre de phases de sortie pour

améliorer le rendement lorsque les noyaux du CPU sont en veille. En

d’autre termes, il peut amener des économies d’énergie exceptionnelles et

améliorer le rendement énergétique sans sacrifier aux performances de

calcul. Pour utiliser la fonction Intelligent Energy Saver (L’économiseur

d’énergie intelligent), veuillez activer l’option Cool ‘n’ Quiet dans l’outil de

configuration du BIOS par avance. Veuillez visiter notre site Web pour

connaître les procédures d’utilisation de l’ Intelligent Energy Saver

(L’économiseur d’énergie intelligent).

Site Web d’ASRock: http://www.asrock.com

9. O ASRock Instant Flash é um utilitário de flash do BIOS incorporado na

memória Flash ROM. Esta prática ferramenta de actualização do BIOS

permite-lhe actualizar o BIOS do sistema sem necessitar de entrar nos

sistemas operativos, como o MS-DOS ou o Windows®. Com este

utilitário, poderá premir a tecla <F6> durante o teste de arranque POST

ou premir a tecla <F2> para exibir o menu de configuração do BIOS

para aceder ao ASRock Instant Flash. Execute esta ferramenta para

guardar o novo ficheiro de BIOS numa unidade flash USB, numa

FranFran

Françaisçais

çaisçais

çais

4444

44 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

FrançaisFrançais

Français

disquete ou num disco rígido, em seguida, poderá actualizar o BIOS

com apenas alguns cliques sem ter de utilizar outra disquete ou

outro complicado utilitário de flash. Note que a unidade flash USB ou

a unidade de disco rígido devem utilizar o sistema de ficheiros

FAT32/16/12.

10. Le nom même du logiciel – OC DNA vous indique littéralement ce

dont il est capable. OC DNA, utilitaire exclusif développé par ASRock,

offre une façon pratique pour l’utilisateur d’enregistrer les

paramètres d’overclockage et de les partager avec d’autres. Il vous

aide à enregistrer votre overclockage sous le système d’exploitation

et simplifie le processus compliqué d’enregistrement des

paramètres d’overclockage. Avec OC DNA , vous pouvez enregistrer

vos réglages d’overclockage en tant que profil et les partager avec

vos amis ! Vos amis peuvent alors charger le profil d’overclockage

sur leur propre système pour obtenir les mêmes réglages

d’overclockage que les vôtres ! Veuillez noter que le profil

d’overclockage peut être partagé et utilisé uniquement sur la même

carte mère.

11. Si vous désirez un moyen plus rapide et moins contraignant de

recharger vos appareils Apple tels que iPhone/iPod/iPad Touch, ASRock

a préparé pour vous la solution idéale - le chargeur ASRock APP. Il

suffit d’installer le pilote du chargeur APP, et vous pourrez recharger

rapidement votre iPhone à partir de votre ordinateur, jusqu’à 40% plus

vite qu’avant. Le chargeur ASRock APP vous permet de charger

rapidement et simultanément plusieurs appareils Apple, et le chargement

continu est même pris en charge lorsque le PC passe en mode Veille

(S1), Suspension à la RAM (S3), hibernation (S4) ou hors tension (S5).

Lorsque le pilote du chargeur APP est installé, vous découvrez un mode

de mise en charge tout à fait inédit.

Site web ASRock : http://www.asrock.com/Feature/AppCharger/index.

asp

12. ASRock XFast USB permet d’améliorer les performances de votre

périphérique de stockage USB. Les performances réelles dépendent

des propriétés du périphérique.

13. ASRock XFast LAN fournit un acces Internet plus rapide, avec les avan-

tages suivants. Priorisation d¡¦application LAN : Vous pouvez confi gurer

votre priorite d¡¦application idealement et/ou ajouter des nouveaux pro-

grammes. Latence plus basse dans les jeux : Apres avoir regle la priorite

de jeux en ligne plus haute, cela peut reduire la latence dans les jeux.

Forme du trafi c : Vous pouvez regarder des videos HD YouTube et te-

lecharger simultanement des fi chiers. Analyse en temps reel de vos

don-nees : Avec la fenetre d¡¦etat, vous pouvez facilement reconnaitre

les fl ux de donnees que vous etes en train de transferer.

4545

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

14. Même si cette carte mère offre un contrôle sans souci, il n’est pas

recommandé d’y appliquer un over clocking. Les fréquences autres

que les fréquences de bus d’UC recommandées risquent de

déstabiliser le système ou d’endommager l’UC.

15. Lorsqu’une surchauffe du CPU est détectée, le système s’arrête

automatiquement. Avant de redémarrer le système, veuillez vérifier que

le ventilateur d’UC sur la carte mère fonctionne correctement et

débranchez le cordon d’alimentation, puis rebranchez-le. Pour améliorer

la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique

entre le CPU le dissipateur lors de l’installation du PC.

16. EuP, qui signifie Energy Using Product (Produit Utilisant de l’Energie),

est une disposition établie par l’Union Européenne pour définir la

consommation de courant pour le système entier. Conformément à la

norme EuP, le courant CA total du système entier doit être inférieur à 1

W en mode d’arrêt. Pour être conforme à la norme EuP, une carte mère

EuP et une alimentation EuP sont requises. Selon les suggestions

d’Intel’, l’alimentation électrique EuP doit correspondre à la norme, qui

est que l’efficacité électrique de 5v en mode de veille doit être supérieure

à 50% pour 100 mA de consommation de courant. Pour choisir une

alimentation électrique conforme à la norme EuP, nous vous

recommandons de consulter votre fournisseur de courant pour plus de

détails.

FranFran

Françaisçais

çaisçais

çais

4646

46 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

FrançaisFrançais

Français

1.3 Réglage des cavaliers1.3 Réglage des cavaliers

1.3 Réglage des cavaliers

L’illustration explique le réglage des

cavaliers. Quand un capuchon est placé sur

les broches, le cavalier est « FERME ». Si

aucun capuchon ne relie les broches,le cava-

lier est « OUVERT ». L’illustration montre un

cavalier à 3 broches dont les broches 1 et 2

sont « FERMEES » quand le capuchon est

placé sur ces 2 broches.

Le cavalier Description

PS2_USB_PW1 Court-circuitez les broches 2

(voir p.2 fig. 1) et 3 pour choisir +5VSB

(standby) et permettre aux

périphériques PS/2 ou USB de

réveiller le système.

Note: Pour sélectionner +5VSB, il faut obligatoirement 2 Amp et un courant standby

supérieur fourni par l’alimentation.

Ferme Ouvert

Effacer la CMOS

(CLRCMOS1)

(voir p.2 fig. 9)

Note: CLRCMOS1 vous permet d’effacer les données qui se trouvent dans la CMOS.

Les données dans la CMOS comprennent les informations de configuration du

système telles que le mot de passe système, la date, l’heure et les paramètres

de configuration du système. Pour effacer et réinitialiser les paramètres du

système pour retrouver la configuration par défaut, veuillez mettre l’ordinateur

hors tension et débrancher le cordon d’alimentation de l’alimentation électrique.

Attendez 15 secondes, puis utilisez un capuchon de cavalier pour court-

circuiter la broche 2 et la broche 3 sur CLRCMOS1 pendant 5 secondes. Après

avoir court-circuité le cavalier Effacer la CMOS, veuillez enlever le capuchon de

cavalier. Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis

le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de

mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre

hors tension avant de procéder à l’opération d’effacement de la CMOS.

Effacer la

CMOS

Paramètres

par défaut

4747

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Câble de données Toute cote du cable de data SATA

Série ATA (SATA) peut etre connecte au disque dur

(en option) SATA / SATAII ou au connecteur

SATAII sur la carte mere.

le côté avec fil rouge côté

Broche1

1.4 Connecteurs1.4 Connecteurs

1.4 Connecteurs

Les connecteurs Description

Connecteur du lecteur

de disquette

(FLOPPY1 br. 33)

(voir p.2 fig. 21)

Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le

côté Broche1 du connecteur.

Connecteur IDE primaire (bleu)

(IDE1 br. 39, voir p.2 No. 10)

connecteur bleu connecteur noir

vers la carte mère vers le disque dur

Câble ATA 66/100/133 80 conducteurs

Note: Veuillez vous reporter aux instructions du fabricant de votre IDE périphérique

pour les détails.

Les connecteurs NE SONT PAS des cavaliers. NE PLACEZ AUCUN

capuchon sur ces connecteurs. Poser les bouchons pour cavaliers

audessus des connecteurs provoquera des dommages irrémédiables

à la carte mère!

Connecteurs Série ATAII Ces quatre connecteurs Serial

(SATAII_1 (PORT 0): ATA (SATAII) prennent en charge

voir p.2 fig. 17) les disques durs SATA ou SATAII

(SATAII_2 (PORT 1): pour les dispositifs de stockage

voir p.2 fig. 16) interne. L’interface SATAII

(SATAII_3 (PORT 2): actuelle permet des taux

voir p.2 fig. 13) transferts de données pouvant

(SATAII_4 (PORT 3): aller jusqu’à 3,0 Go/s.

voir p.2 fig. 14)

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

FranFran

Françaisçais

çaisçais

çais

4848

48 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

FrançaisFrançais

Français

En-tête USB 2.0 A côté des quatre ports USB

(USB6_7 br.9) 2.0 par défaut sur le panneau

(voir p.2 No. 19) E/S, il y a deux embases USB

2.0 sur cette carte mère.

Chaque embase USB 2.0 peut

(USB4_5 br.9) prendre en charge 2 ports USB

(voir p.2 No. 18) 2.0.

Connecteur audio panneau C’est une interface pour un câble

avant audio en façade qui permet le

(HD_AUDIO1 br. 9) branchement et le contrôle

(voir p.2 fig. 23) commodes de périphériques

audio.

Embase de port d’impression AIl s’agit d’une interface pour le

(LPT1 25 broches) câble du port d’impression, qui

(voir p.2 No. 22) permet le raccordement

pratique de périphériques

d’impression.

1. L’audio à haute définition (HDA) prend en charge la détection de fiche,

mais le fil de panneau sur le châssis doit prendre en charge le HDA pour

fonctionner correctement. Veuillez suivre les instructions dans notre

manuel et le manuel de châssis afin installer votre système.

2. Si vous utilisez le panneau audio AC’97, installez-le sur l’adaptateur audio

du panneau avant conformément à la procédure ci-dessous :

A. Connectez Mic_IN (MIC) à MIC2_L.

B. Connectez Audio_R (RIN) à OUT2_R et Audio_L (LIN) à OUT2_L.

C. Connectez Ground (GND) à Ground (GND).

D. MIC_RET et OUT_RET sont réservés au panneau audio HD. Vous

n’avez pas besoin de les connecter pour le panneau audio AC’97.

E. Pour activer le micro avant.

Pour les systèmes d’exploitation Windows® XP / XP 64 bits :

Sélectionnez “Mixer”. Sélectionnez “Recorder” (Enregistreur). Puis cliquez

sur “FrontMic” (Micro avant).

4949

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Connecteur du haut-parleur Veuillez connecter le haut-

du châssis parleur de châssis sur ce

(SPEAKER1 br. 4) connecteur.

(voir p.2 fig. 8)

Connecteur pour panneau Ce connecteur offre plusieurs

(PANEL1 br. 9) fonctions système en façade.

(voir p.2 fig. 15)

Connecteur pour ventilateur Veuillez connecter un câble de

CPU ventilateur d’UC sur ce

(CPU_FAN1 br. 4) connecteur et brancher le fil noir

(voir p.2 fig. 6) sur la broche de terre.

Pour les systèmes d’exploitation Windows® 7 / 7 64 bits / VistaTM / VistaTM

64 bits :

Allez sur l’onglet “FrontMic” (Micro avant) sur le Panneau de contrôle

Realtek. Ajustez “Recording Volume” (Volume d’enregistrement).

Connecteur pour châssis et ventilateur

(CHA_FAN1 br. 3)

(voir p.2 No. 20)

(PWR_FAN1 br. 3)

(voir p.2 No. 28)

Branchez les câbles du

ventilateur aux connecteurs pour

ventilateur et faites correspondre

le fil noir à la broche de terre.

ien que cette carte mère offre un support de (Ventilateur silencieux)

ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien

fonctionner même sans la fonction de commande de vitesse du ventilateur.

Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au

connecteur du ventilateur de CPU sur cette carte mère, veuillez le

connecter aux broches 1-3.

Installation de ventilateur à 3 broches

Broches 1-3 connectées

FranFran

Françaisçais

çaisçais

çais

5050

50 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

FrançaisFrançais

Français

Connecteur d’alimentation ATX Veuillez connecter une unité

(ATXPWR1 br. 24) d’alimentation ATX sur ce

(voir p.2 fig. 7) connecteur.

20-Installation de l’alimentation électrique ATX

Bien que cette carte mère fournisse un connecteur de

courant ATX 24 broches, elle peut encore fonctionner si vous

adopter une alimentation traditionnelle ATX 20 broches. Pour

utiliser une alimentation ATX 20 broches, branchez à

l’alimentation électrique ainsi qu’aux broches 1 et 13.

Connecteur d’alimentation Veuillez noter qu’il est nécessaire

12V ATX de connecter une unité

(ATX12V1 br. 4) d’alimentation électrique avec

(voir p.2 fig. 2) prise ATX 12V sur ce

connecteur afin d’avoir une

alimentation suffisante. Faute de

quoi, il ne sera pas possible de

mettre sous tension.

5151

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2. Informations sur le BIOS2. Informations sur le BIOS

2. Informations sur le BIOS

La puce Flash Memory sur la carte mère stocke le Setup du BIOS. Lorsque vous

démarrez l’ordinateur, veuillez presser <F2> pendant le POST (Power-On-Self-

Test) pour entrer dans le BIOS; sinon, le POST continue ses tests de routine. Si

vous désirez entrer dans le BIOS après le POST, veuillez redémarrer le système

en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le

boîtier du système. Vous pouvez également redémarrer en éteignant le système et

en le rallumant. L’utilitaire d’installation du BIOS est conçu pour être convivial. C’est

un programme piloté par menu, qui vous permet de faire défiler par ses divers

sous-menus et de choisir parmi les choix prédéterminés. Pour des informations

détaillées sur le BIOS, veuillez consulter le Guide de l’utilisateur (fichier PDF) dans

le CD technique.

3. Informations sur le CD de support3. Informations sur le CD de support

3. Informations sur le CD de support

Cette carte mère supporte divers systèmes d’exploitation Microsoft® Windows®:

7 / 7 64-bit / VistaTM / VistaTM 64 bits / XP / XP Media Center / XP 64-bit. Le CD

technique livré avec cette carte mère contient les pilotes et les utilitaires

nécessaires pour améliorer les fonctions de la carte mère. Pour utiliser le CD

technique, insérez-le dans le lecteur de CD-ROM. Le Menu principal s’affiche

automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu

principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier

“ASSETUP.EXE” dans le dossier BIN et double-cliquez dessus pour afficher les

menus.

FranFran

Françaisçais

çaisçais

çais

5252

52 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ItalianoItaliano

Italiano

1. Introduzione

Grazie per aver scelto una scheda madre ASRock 985GM-GS3 FX / 985GM-S3 FX,

una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le

prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella

ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene

l’introduzione alla motherboard e la guida passo-passo all’installazione. Informazioni

più dettagliate sulla motherboard si possono trovare nel manuale per l’utente presente

nel CD di supporto.

Le specifiche della scheda madre e il software del BIOS possono

essere aggiornati, pertanto il contenuto di questo manuale può

subire variazioni senza preavviso. Nel caso in cui questo manuale sia

modificato, la versione aggiornata sarà disponibile sul sito di

ASRock senza altro avviso. Sul sito ASRock si possono anche trovare

le più recenti schede VGA e gli elenchi di CPU supportate.

ASRock website http://www.asrock.com

Se si necessita dell’assistenza tecnica per questa scheda madre,

visitare il nostro sito per informazioni specifiche sul modello che si

sta usando.

www.asrock.com/support/index.asp

1.11.1

1.1 Contenuto della confezioneContenuto della confezione

Contenuto della confezioneContenuto della confezione

Contenuto della confezione

Scheda madre ASRock 985GM-GS3 FX / 985GM-S3 FX

(Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm)

Guida di installazione rapida ASRock 985GM-GS3 FX / 985GM-S3 FX

CD di supporto ASRock 985GM-GS3 FX / 985GM-S3 FX

Due cavo dati Serial ATA (SATA) (Opzionale)

Un I/O Shield

5353

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1.21.2

1.2 SpecificheSpecifiche

SpecificheSpecifiche

Specifiche

Piattaforma - Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm

- Condensateur résistant pour alimentation de processeur

Processore - Supporto di processori Socket AM3+

- Supporto di processori Socket AM3: AMD PhenomTM II X6 / X4 /

X3 / X2 (fatta eccezione per 920 / 940) / Athlon II X4 / X3 / X2 /

Sempron

- CPU Otto-Core Ready

- Supporta AMD OverDriveTM con funzione ACC (Advanced Clock

Calibration)

- Pronto AMD LIVE!TM

- Supporto tecnologia AMD Cool ‘n’ QuietTM

- FSB 2600 MHz (5.2 GT/s)

- Supporta la tecnologia overclocking “slegata”

(vedi ATTENZIONE 1)

- Supporta la tecnologia Hyper-Transport 3.0 (HT 3.0)

Chipset - Northbridge: AMD 785G

- Southbridge: AMD SB710

Memoria - Supporto tecnologia Dual Channel Memory (vedi ATTENZIONE 2)

- 2 x slot DDR3 DIMM

- Supporto DDR3 1800(OC)/1600(OC)/1333/1066/800 non-ECC,

momoria senza buffer (vedi ATTENZIONE 3)

- Capacità massima della memoria di sistema: 8GB

(vedi ATTENZIONE 4)

Slot di - 1 x slot PCI Express 2.0 x16 (blu a modalità x16)

espansione - 1 x slot PCI Express 2.0 x1

- 2 x slot PCI

- Supporto di AMD Hybrid CrossFireXTM

VGA su scheda - Grafica AMD Radeon HD 4200 integrata

- iGPU classe DX10.1, Pixel Shader 4.1

- Memoria massima condivisa 512MB (vedi ATTENZIONE 5)

- Supporta D-Sub con risoluzione massima fino a 2048x1536 @

60Hz

Audio - 5.1 Audio HD CH (Realtek ALC662 Audio Codec)

LAN - 985GM-GS3 FX

Realtek PCIE x1 Gigabit LAN RTL8111E,

velocità 10/100/1000 Mb/s

- 985GM-S3 FX

Realtek PCIEx1 LAN 8105EL, velocità 10/100 Mb/s

- Supporta Wake-On-LAN

ItalianoItaliano

Italiano

5454

54 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ItalianoItaliano

Italiano

- Supporta PXE

Pannello I/O Panel

posteriore I/O - 1 x porta PS/2 per mouse

- 1 x porta PS/2 per tastiera

- 1 x Porta COM

- 1 x Porta VGA

- 4 x porte USB 2.0 già integrate

- 1 x porte LAN RJ-45 con LED (LED azione/collegamento e LED

velocità)

- Audio Jack: Line In / Line Out / Microfono

Connettori - 4 x connettori SATA2 3.0Go/s, sopporta RAID (RAID 0, RAID 1,

RAID 10 e JBOD), NCQ, AHCI e “Collegamento a caldo”

(vedi ATTENZIONE 6)

- 1 x connettori ATA133 IDE (supporta fino a 2 dispositivi IDE)

- 1 x porta Floppy

- 1 x Collettore porta stampante

- Connettore CPU/Chassis/Alimentazione ventola

- 24-pin collettore alimentazione ATX

- 4-pin connettore ATX 12V

- Connettore audio sul pannello frontale

- 2 x Collettore USB 2.0 (supporta 4 porte USB 2.0)

BIOS - 8Mb AMI BIOS

- Suppor AMI legal BIOS

- Supporta “Plug and Play”

- Compatibile con ACPI 1.1 wake up events

- Supporta jumperfree

- Supporta SMBIOS 2.3.1

- Regolazione multi-voltaggio CPU, VCCM, NB

CD di - Driver, utilità, software antivirus (Versione dimostrativa),

supporto CyberLink MediaEspresso 6.5 Trial, Google Chrome Browser e

Toolbar

Caratteristi- - Sintonizzatore ASRock OC (vedi ATTENZIONE 7)

ca speciale - ASRock Intelligent Energy Saver (ASRock Risparmio intelligente

dell’energia) (vedi ATTENZIONE 8)

- ASRock Instant Boot

- ASRock Instant Flash (vedi ATTENZIONE 9)

- ASRock OC DNA (vedi ATTENZIONE 10)

- Caricatore ASRock APP Charger (vedi ATTENZIONE 11)

- ASRock XFast USB (vedi ATTENZIONE 12)

- ASRock XFast LAN (vedi ATTENZIONE 13)

5555

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ATTENZIONE!

1. Questa scheda madre supporta la tecnologia overclocking “slegata”.

Per i dettagli leggere “Tecnologia di Untied Overclocking” a pagina 24.

2. Questa scheda madre supporta la tecnologia Dual Channel Memory.

Prima di implementare la tecnologia Dual Channel Memory, assicurarsi di

leggere la guida all’installazione dei moduli di memoria, a pagina 13, per

seguire un’installazione appropriata.

3. Il fatto che la velocità della memoria da 1800/1600MHz sia supportata o

meno, dipende dagli AM3/AM3+ CPU utilizzati. Se si desidera adottare

il modulo di memoria DDR3 1800/1600 su questa scheda madre, fare

riferimento all’elenco delle memorie supportate nel nostro sito web

per scoprire quali sono i moduli compatibili.

Sito web ASRock http://www.asrock.com

4. A causa delle limitazioni del sistema operativo, le dimensioni effettive

della memoria possono essere inferiori a 4GB per l’accantonamento

riservato all’uso del sistema sotto Windows® 7 / VistaTM / XP. Per

Windows® OS con CPU 64-bit, non c’è tale limitazione.

AVVISO

Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche

la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking

Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può

influenzare la stabilità del sistema, ed anche provocare danni ai componenti ed alle

periferiche del sistema. La procedura è eseguita a proprio rischio ed a proprie spese. Noi

non possiamo essere ritenuti responsabili per possibili danni provocati dall’overclocking.

- Booster ibrido:

- Stepless control per frequenza del processore

(vedi ATTENZIONE 14)

- ASRock U-COP (vedi ATTENZIONE 15)

- Boot Failure Guard (B.F.G.)

Monitor- - Sensore per la temperatura del processore

aggio - Sensore temperatura scheda madre

Hardware - Indicatore di velocita per la ventola del CPU/Chassis/

Alimentazione

- Ventola CPU silenziosa

- Voltaggio: +12V, +5V, +3.3V, Vcore

Compatibi- - Microsoft® Windows® 7 / 7 64 bit / VistaTM / VistaTM 64 bit

lità SO / XP / Centro multimediale XP / XP 64 bit

Certificazioni- FCC, CE, WHQL

- Predisposto ErP/EuP (è necessaria l’alimentazione predisposta

per il sistema ErP/EuP) (vedi ATTENZIONE 16)

* Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com

ItalianoItaliano

Italiano

5656

56 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ItalianoItaliano

Italiano

5. La dimensione massima della memoria condivisa viene stabilita dal

venditore del chipset ed e‘ soggetta a modificazioni. Prego fare

riferimento al sito internet AMD per le ultime informazioni.

6. Prima di installare il disco rigido SATAII con il connettore SATAII,

leggere la “Guida per la configurazione del disco rigido SATAII” a

pagina 27 del “Manuale utente” nel CD in dotazione in modo da poter

predisporre il disco rigido SATAII per la modalità SATAII. È anche

possibile connettere il disco rigido SATA direttamente al connettore

SATAII.

7. Si tratta di uno strumento di sicronizzazione ASRock di face uso in

grado di implementare il controllo del sistema tramite la funzione di

hardware monitor e sincronizzare le Vostre unita‘ hardware per

ottenere la migliore prestazione in Windows®. Prego visitare il nostro

sito Internet per ulteriori dettagli circa l‘uso del Sintonizzatore ASRock

OC.

ASRock website: http://www.asrock.com

8. Grazie ad un innovative hardware proprietario ed alla progettazione

specifica del software, Intelligent Energy Saver (Risparmio

intelligente dell’energia), è una tecnologia rivoluzionaria che

consente di realizzare risparmi energetici senza pari. Il regolatore di

tensione è in grado di ridurre il numero di fasi in uscita in modo da

migliorare l’efficienza quando i nuclei della CPU sono inattivi. In alter

parole, permette di realizzare risparmi energetica senza pari e di

migliorare l’efficienza energetica senza ridurre le prestazioni del

computer. Per usare la funzione Intelligent Energy Saver (Risparmio

intelligente dell’energia), attivare l’opzione Cool ‘n’ Quiet nella

configurazione avanzata del BIOS. Si prega di visitare il nostro sito

Internet per le procedure di funzionamento dell’Intelligent Energy

Saver (Risparmio intelligente dell’energia).

Sito Internet di ASRock: http://www.asrock.com

9. ASRock Instant Flash è una utilità Flash BIOS integrata nella Flash ROM.

Questo comodo strumento d’aggiornamento del BIOS permette di

aggiornare il sistema BIOS senza accedere a sistemi operativi come MS-

DOS or Windows®. Con questa utilità, si può premere il tasto <F6>

durante il POST, oppure il tasto <F2> nel menu BIOS per accedere ad

ASRock Instant Flash. Avviare questo strumento e salvare il nuovo file

BIOS nell’unità Flash USB, dischetto (disco floppy) o disco rigido; poi si

può aggiornare il BIOS con pochi clic, senza preparare altri dischetti

(dischi floppy) o altre complicate utilità Flash. Si prega di notare che

l’unità Flash USB o il disco rigido devono usare il File System FAT32/16/

12.

10. Il nome stesso del software – OC DNA – dice di cosa è capace. OC

DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo

comodo per registrare le impostazioni OC e condividerle con gli altri. Aiuta

a salvare le registrazioni di overclocking nel sistema operativo e

semplifica la complicata procedura di registrazione delle impostazioni di

overclocking. Con OC DNA, puoi salvare le impostazioni OC come un

5757

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

profilo da condividere con gli amici! I tuoi amici possono scaricare il

profilo OC sul loro sistema operativo per ottenere le tue stesse

impostazioni OC! Si prega di notare che il profilo OC può essere

condiviso e modificato solo sulla stessa scheda madre.

11. Se vuoi un modo rapido e indipendente per caricare i dispositivi Apple,

come iPhone/iPod/iPad Touch, ASRock ha preparato una soluzione

meravigliosa: ASRock APP Charger. Basta installare il driver APP

Charger per caricare l’iPhone più rapidamente rispetto al computer, con

una velocità maggiore del 40%. ASRock APP Charger permette di

caricare simultaneamente molti dispositivi Apple in modo rapido e

supporta anche il caricamento continuato quando il PC accede alla

modalità di Standby (S1), Sospensione su RAM (S3), Ibernazione (S4) o

Spegnimento (S5). Una volta installato il driver APP Charger si otterranno

prodigi e comodità mai avuti prima.

Sito ASRock: http://www.asrock.com/Feature/AppCharger/index.asp

12. ASRock XFast USB può accelerare le prestazioni del dispositivo

d’archiviazione USB. Le prestazioni dipendono dalle proprietà del

dispositivo.

13. ASRock XFast LAN offre un accesso a Internet piu veloce, che

compren-de i seguenti benefi ci. Priorita alle applicazioni LAN: e

possibile confi gu-rare la priorita assegnata alle applicazioni in modo

ideale e/o aggiungere nuovi programmi. Minore latenza nei giochi:

dopo avere impostato la priorita dei giochi su un livello piu alto, la

latenza dei giochi puo essere minore. Confi gurazione del traffi co: e

possibile seguire video HD su Youtube e scaricare fi le

contemporaneamente. Analisi in tempo reale dei dati: grazie alla fi

nestra di stato, e possibile riconoscere con facilita quali dati si

stanno trasferendo in streaming.

14. Anche se questa motherboard offre il controllo stepless, non si

consiglia di effettuare l’overclocking. L’uso di frequenze diverse da

quelle raccomandate per il bus CPU possono provocare l’instabilità

del sistema o danneggiare la CPU.

15. Se il processore si surriscalda, il sistema si chiude automaticamente.

Prima di riavviare il sistema, assicurarsi che la ventolina CPU della

scheda madre funzioni correttamente; scollegare e ricollegare il cavo

d’alimentazione. Per migliorare la dissipazione del calore, ricordare di

applicare l’apposita pasta siliconica tra il processore e il dissipatore

quando si installa il sistema.

ItalianoItaliano

Italiano

5858

58 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ItalianoItaliano

Italiano

Azzeramento

CMOS

Impostazione

predefinita

Resettare la CMOS

(CLRCMOS1)

(vedi p.2 item 9)

Nota: CLRCMOS1 permette di cancellare i dati presenti nel CMOS. I dati del CMOS

comprendono le informazioni di configurazione quali la password di sistema,

data, ora, e i parametri di configurazione del sistema. Per cancellare e

ripristinare i parametri del sistema, spegnere il computer e togliere il cavo di

alimentazione dalla presa di corrente. Dopo aver lasciato trascorrere 15

secondi, utilizzare un cappuccio jumper per cortocircuitare i pin 2 e 3 su

CLRCMOS1 per 5 secondi. Dopo aver cortocircuitato il jumper Clear CMOS

jumper, togliere il terminatore jumper. Non cancellare la CMOS subito dopo

aver aggiornato il BIOS. Se è necessario cancellare la CMOS una volta

completato l’aggiornamento del BIOS, è necessario riavviare prima il sistema, e

poi spegnerlo prima di procedere alla cancellazione della CMOS.

CORTOCIRCUITATO APERTO

1.3 Setup dei Jumpers1.3 Setup dei Jumpers

1.3 Setup dei Jumpers

L’illustrazione mostra come sono settati i jumper.

Quando il ponticello è posizionato sui pin, il jumper

è “CORTOCIRCUITATO”. Se sui pin non ci sono

ponticelli, il jumper è “APERTO”. L’illustrazione

mostra un jumper a 3 pin in cui il pin1 e il pin2 sono

“CORTOCIRCUITATI” quando il ponticello è

posizionato su questi pin.

Jumper Settaggio del Jumper

PS2_USB_PW1 Cortocircuitare pin2, pin3 per

(vedi p.2 item 1) settare a +5VSB (standby) e

abilitare PS/2 o USB wake up

events.

Nota: Per selezionare +5VSB, si richiedono almeno 2 Ampere e il consumo di

corrente in standby sarà maggiore.

16. EuP, che sta per Energy Using Product (Prodotto che consuma

energia) , era una normativa emanata dall’Unione Europea che

definiva il consumo energetico del sistema completo. In base

all’EuP, l’alimentazione totale del sistema completo deve essere

inferiore a 1,00 W quando è spento. Per soddisfare la norma EuP

sono necessari un alimentatore e una scheda elettrica predisposti

EuP. In base ai suggerimenti Intel l’alimentatore predisposto EuP

deve soddisfare lo standard secondo cui l’efficienza energetica in

standby di 5 v è più alta del 50% con un consumo di corrente di 100

mA. Per la scelta di un’alimentatore predisposto EuP consigliamo di

verificare ulteriori dettagli con il produttore.

5959

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Lato del Pin1 con la striscia

rossa

1.4 Connettori1.4 Connettori

1.4 Connettori

Connettore IDE primario (blu)

(39-pin IDE1, vedi p.2 Nr. 10)

Connettore blu Connettore nero

alla schedamadre all’hard disk drive

Cavo ATA 66/100/133 a 80 Pin

Nota: Fate riferimento alle istruzioni del produttore del dispositivo IDE per maggiori

dettagli.

Connettori Descrizione dei connettori

Connettore del

Floppy disk

(33-pin FLOPPY1)

(vedi p.2 item 21)

Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1

del connettore.

I connettori NON sono jumpers. NON COLLOCARE i ponticelli sui

connettori. Installando dei cappucci a ponticello sui connettori si

causeranno danni permanenti alla scheda madre!

Connettori Serial ATAII Questi quattro connettori Serial

(SATAII_1 (PORT 0): ATA (SATAII) supportano le

vedi p.2 Nr. 17) periferiche di archiviazione

(SATAII_2 (PORT 1): HD SATA o SATAII per le

vedi p.2 Nr. 16) funzioni di archiviazione

(SATAII_3 (PORT 2): interna. ATAII (SATAII) suppo-

vedi p.2 Nr. 13) rtano cavi SATAII per dispositivi

(SATAII_4 (PORT 3): di memoria interni. L’interfaccia

vedi p.2 Nr. 14) SATAII attuale permette velocità

di trasferimento dati fino a

3.0 Gb/s.

Cavi dati Serial ATA (SATA) Una o altra estremità del cavo

(Opzionale) di dati SATA può essere

collegata al disco rigido SATA /

SATAII o al connettore di SATAII

su questa cartolina base.

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

ItalianoItaliano

Italiano

6060

60 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ItalianoItaliano

Italiano

Connettore audio sul È un’interfaccia per il cavo del

pannello frontale pannello audio. Che consente

(9-pin HD_AUDIO1) connessione facile e controllo

(vedi p.2 item 23) dei dispositivi audio.

Collettore USB 2.0 Oltre alle quattro porte USB 2.0

(9-pin USB6_7) predefinite nel pannello I/O, la

(vedi p.2 No. 19) scheda madre dispone di due

intestazioni USB 2.0. Ciascuna

intestazione USB 2.0 supporta

(9-pin USB4_5) due porte USB 2.0.

(vedi p.2 No. 18)

Collettore porta stampante Questa è un’interfaccia per il

(LPT1 25 pin) cavo porta stampante che

(vedi p.2 No. 22) consente di collegare, con

comodità, dispositivi di stampa.

1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei

connettori, però il pannello dei cavi sul telaio deve supportare la funzione

HDA (High Definition Audio) per far sì che questa operi in modo corretto.

Attenersi alle istruzioni del nostro manuale e del manuale del telaio per

installare il sistema.

2. Se si utilizza un pannello audio AC’97, installarlo nell’intestazione audio

del pannello anteriore, come indicato di seguito:

A. Collegare Mic_IN (MIC) a MIC2_L.

B. Collegare Audio_R (RIN) a OUT2_R e Audio_L (LIN) ad OUT2_L.

C. Collegare Ground (GND) a Ground (GND).

D. MIC_RET e OUT_RET sono solo per il pannello audio HD. Non è

necessario collegarli per il pannello audio AC’97.

E. Per attivare il microfono frontale.

Sistema operativo Windows® XP / XP 64-bit:

Selezionare “Mixer”. Selezionare “Recorder” (Registratore). Poi, fare clic

su “FrontMic” (Microfono frontale).

6161

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Connettore del panello Questo connettore accoglie

frontale diverse funzioni del pannello

(9-pin PANEL1) frontale.

(vedi p.2 item 15)

Collettore casse telaio Collegare le casse del telaio a

(4-pin SPEAKER1) questo collettore.

(vedi p.2 item 8)

Connettore ventolina CPU Collegare il cavo della ventolina

(4-pin CPU_FAN1) CPU a questo connettore e far

(vedi p.2 item 6) combaciare il filo nero al pin

terra.

Sistema operativo Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit:

Andare alla scheda “FrontMic” (Microfono frontale) del pannello di controllo

Realtek. Regolare la voce “Recording Volume” (Volume registrazione).

Collettori Chassis ed alimentazione ventola Collegare i cavi della ventola ai

(3-pin CHA_FAN1) corrispondenti connettori

(vedi p.2 Nr. 20) facendo combaciare il cavo

nero col pin di terra.

(3-pin PWR_FAN1)

(vedi p.2 Nr. 28)

Collettore alimentazione ATX Collegare la sorgente

(24-pin ATXPWR1) d’alimentazione ATX a questo

(vedi p.2 item 7) collettore.

Sebbene la presente scheda madre disponga di un supporto per ventola

CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di

funzionare anche senza la funzione di controllo della velocità della ventola.

Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola

CPU su questa scheda madre, collegarla ai piedini 1-3.

Piedini 1-3 collegati

Installazione della ventola a 3 piedini

ItalianoItaliano

Italiano

6262

62 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ItalianoItaliano

Italiano

Connettore ATX 12V È necessario collegare una

(4-pin ATX12V1) alimentazione con spinotto da

(vedi p.2 item 2) 12V ATX a questo connettore

in modo che possa fornire

energia sufficiente. In caso

contrario l’unità non si avvia.

Installazione dell’alimentatore ATX a 20 pin

Con questa scheda madre, c’è in dotazione un connettore

elettrico ATX a 24 pin, ma può funzionare lo stesso se si

adotta un alimentatore ATX a 20 pin. Per usare l’alimentatore

ATX a 20 pin, collegare l’alimentatore con il Pin 1 e il Pin 13.

6363

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2. Informazioni sul BIOS2. Informazioni sul BIOS

2. Informazioni sul BIOS

La Flash Memory sulla scheda madre contiene le Setup Utility. Quando si avvia il

computer, premi <F2> durante il Power-On-Self-Test (POST) della Setup utility del

BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup

dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto

di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.

Es un programa guido al menu, es decir, puede enrollarse a sus varios su-menues

y elegir las opciones predeterminadas. Per informazioni più dettagliate circa il

Setup del BIOS, fare riferimento al Manuale dell’Utente (PDF file) contenuto nel cd

di supporto.

3. Software di supporto e informazioni3. Software di supporto e informazioni

3. Software di supporto e informazioni

su CD su CD

su CD

Questa scheda madre supporta vari sistemi operativi Microsoft® Windows®: 7 /

7 64 bit / VistaTM / VistaTM 64-bit / XP / Centro multimediale XP / XP 64 bit. Il CD di

supporto a corredo della scheda madre contiene i driver e utilità necessari a

potenziare le caratteristiche della scheda. Inserire il CD di supporto nel lettore CD-

ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà automaticamente il

Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul

file ASSETUP.EXE nel CESTINO del CD di supporto e cliccare due volte per

visualizzare i menù.

ItalianoItaliano

Italiano

6464

64 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EspañolEspañol

Español

1. Introducción1. Introducción

1. Introducción

Gracias por su compra de ASRock 985GM-GS3 FX / 985GM-S3 FX placa madre, una

placa de confianza producida bajo el control de calidad estricto y persistente. La

placa madre provee realización excelente con un diseño robusto conforme al

compromiso de calidad y resistencia de ASRock.

Esta Guía rápida de instalación contiene una introducción a la placa base y una guía

de instalación paso a paso. Puede encontrar una información más detallada sobre la

placa base en el manual de usuario incluido en el CD de soporte.

Porque las especificaciones de la placa madre y el software de BIOS

podrían ser actualizados, el contenido de este manual puede ser

cambiado sin aviso. En caso de cualquier modificación de este manual,

la versión actualizada estará disponible en el website de ASRock sin

previo aviso. También encontrará las listas de las últimas tarjetas VGA y

CPU soportadas en la página web de ASRock.

Website de ASRock http://www.asrock.com

Si necesita asistencia técnica en relación con esta placa base, visite

nuestra página web con el número de modelo específico de su placa.

www.asrock.com/support/index.asp

1.11.1

1.1 Contenido de la cajaContenido de la caja

Contenido de la cajaContenido de la caja

Contenido de la caja

Placa base ASRock 985GM-GS3 FX / 985GM-S3 FX

(Factor forma Micro ATX: 24,4 cm x 18,3 cm, 9,6” x 7,2”)

Guía de instalación rápida de ASRock 985GM-GS3 FX / 985GM-S3 FX

CD de soporte de ASRock 985GM-GS3 FX / 985GM-S3 FX

Dos Cable de Datos Serial ATA (SATA) (Opcional)

Una protección I/O

6565

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1.21.2

1.2 EspecificaciónEspecificación

EspecificaciónEspecificación

Especificación

Plataforma - Factor forma Micro ATX: 24,4 cm x 18,3 cm, 9,6” x 7,2”

- Condensador sólido para alimentación de CPU

Procesador - Compatibilidad con procesadores con conector AM3+

- Compatibilidad con procesadores con conector AM3:

procesador AMD PhenomTM II X6 / X4 / X3 / X2 (excepto 920 /

940) / Athlon II X4 / X3 / X2 / Sempron

- Compatible con CPU de ocho núcleo

- Compatible con AMD OverDriveTM con la función ACC

(Calibración Avanzada de Reloj)

- Compatible con AMD LIVE!TM

- Con soporte para tecnología Cool ‘n’ QuietTM de AMD

- FSB 2600 MHz (5.2 GT/s)

- Admite tecnología de aumento de velocidad liberada

(vea ATENCIÓN 1)

- Soporta Tecnología de Hiper-Transporte 3.0 (HT 3.0)

Chipset - North Bridge: AMD 785G

- South Bridge: AMD SB710

Memoria - Soporte de Tecnología de Memoria de Doble Canal

(ver ATENCIÓN 2)

- 2 x DDR3 DIMM slots

- Apoya DDR3 1800(OC)/1600(OC)/1333/1066/800 non-ECC,

memoria de un-buffered (vea ATENCIÓN 3)

- Máxima capacidad de la memoria del sistema: 8GB

(vea ATENCIÓN 4)

Ranuras de - 1 x ranuras PCI Express 2.0 x16 (azul @ modo x16)

Expansión - 1 x ranura PCI Express 2.0 x1

- 2 x ranuras PCI

- Soporta AMD Hybrid CrossFireXTM

VGA OnBoard - Tarjeta gráfica integrada AMD Radeon HD 4200

- iGPU de clase DX10.1, Pixel Shader 4.1

- 512MB de Memoria máxima compartida (vea ATENCIÓN 5)

- Admite D-Sub con una resolución máxima de 2048x1536 a

60 Hz

Audio - Sonido HD de 5.1 Canales (Códec de sonido Realtek ALC662)

LAN - 985GM-GS3 FX

Realtek PCIE x1 Gigabit LAN RTL8111E,

velocidad 10/100/1000 Mb/s

- 985GM-S3 FX

Realtek PCIEx1 LAN 8105EL, velocidad 10/100 Mb/s

EspañolEspañol

Español

6666

66 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EspañolEspañol

Español

- Soporta Wake-On-LAN

- Soporta PXE

Entrada/Salida I/O Panel

de Panel - 1 x puerto de ratón PS/2

Trasero - 1 x puerto de teclado PS/2

- 1 x puerto serial: COM1

- 1 x Puerto VGA

- 4 x puertos USB 2.0 predeterminados

- 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y

LED de VELOCIDAD)

- Audio Jack: Line In / Line Out / Micrófono

Conectores - 4 x conexiones SATA2, admiten una velocidad de

transferencia de datos de hasta 3,0Gb/s, soporta RAID

(RAID 0, RAID 1, RAID 10 y JBOD), NCQ, AHCI y

“Conexión en caliente” (vea ATENCIÓN 6)

- 1 x ATA133 conexiones IDE (admite hasta 2 dispositivos

IDE)

- 1 x puerto Floppy

- 1 x cabecera de puerto de impresora

- Conector de ventilador de CPU / chasis / alimentacion

- 24-pin cabezal de alimentación ATX

- 4-pin conector de ATX 12V power

- Conector de audio de panel frontal

- 2 x Cabezal USB 2.0 (admite 4 puertos USB 2.0 adicionales)

BIOS - 8Mb AMI BIOS

- AMI legal BIOS

- Soporta “Plug and Play”

- ACPI 1.1 compliance wake up events

- Soporta “jumper free setup”

- Soporta SMBIOS 2.3.1

- Múltiple ajuste de CPU, VCCM, NB Voltage

CD de soport - Controladores, Utilerías, Software de Anti Virus (Versión

de prueba), Prueba de CyberLink MediaEspresso 6.5, Google

Chrome Browser y Toolbar

Característica - Sintonizador de ASRock OC (vea ATENCIÓN 7)

Única - ASRock Administrador de energía inteligente

(vea ATENCIÓN 8)

- ASRock Instant Boot

- ASRock Instant Flash (vea ATENCIÓN 9)

- ASRock OC DNA (vea ATENCIÓN 10)

6767

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

ATENCIÓN!

1. Esta placa base admite la tecnología de aumento de velocidad liberada.

Por favor lea “Tecnología de Forzado de Reloj (Overclocking) no

relacionado” en la página 24 para obtener detalles.

2. Esta placa base soporta Tecnología de Memoria de Doble Canal. Antes de

implementar la Tecnología de Memoria de Doble Canal, asegúrese de leer

la guía de instalación de módulos de memoria en la página 13 para su

correcta instalación.

ADVERTENCIA

Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la

velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de

velocidad liberada o utilizando las herramientas de aumento de velocidad de otros

fabricantes. El aumento de la velocidad puede afectar a la estabilidad del sistema e,

incluso, dañar los componentes y dispositivos del sistema. Esta operación se debe

realizar bajo su propia responsabilidad y Ud. debe asumir los costos. No asumimos

ninguna responsabilidad por los posibles daños causados por el aumento de la velocidad

del reloj.

- ASRock APP Charger (vea ATENCIÓN 11)

- ASRock XFast USB (vea ATENCIÓN 12)

- ASRock XFast LAN (vea ATENCIÓN 13)

- Amplificador Híbrido:

- Stepless control de frecuencia de CPU

(vea ATENCIÓN 14)

- ASRock U-COP (vea ATENCIÓN 15)

- Protección de Falla de Inicio (B.F.G.)

Monitor Hardware - Sensibilidad a la temperatura del procesador

- Sensibilidad a la temperatura de la placa madre

- Taquimetros de los ventiladores del procesador y del CPU

/ chasis / alimentacion

- Ventilador silencioso para procesador

- Monitor de Voltaje: +12V, +5V, +3.3V, Vcore

OS - En conformidad con Microsoft® Windows® 7 / 7 64 bits /

VistaTM / VistaTM 64 bits / XP / XP Media Center / XP 64 bits

Certificaciones - FCC, CE, WHQL

- Cumple con la directiva ErP/EuP (se requiere una fuente de

alimentación que cumpla con la directiva ErP/EuP)

(vea ATENCIÓN 16)

* Para más información sobre los productos, por favor visite nuestro sitio web:

http://www.asrock.com

EspañolEspañol

Español

6868

68 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EspañolEspañol

Español

3. Que la velocidad de memoria de 1800/1600 MHz se admita o no se

admita, depende de la configuración AM3/AM3+ Procesador que adopte.

Si desea adoptar el módulo de memoria DDR3 1800/1600 en esta

placa base, consulte la lista de compatibilidad de memorias en nuestro

sitio Web para obtener los módulos de memoria compatibles.

Sitio Web de ASRock: http://www.asrock.com

4. Debido a las limitaciones del sistema, el tamaño real de la memoria

debe ser inferior a 4GB para que el sistema pueda funcionar bajo

Windows® 7 / VistaTM / XP. Para equipos con Windows® OS con CPU de

64-bit, no existe dicha limitación.

5. El tamaño de la memoria compartido máximo es definido por el

vendedor del chipset y está conforme al cambio. Por favor

compruebe el Web site de AMD para la información más última.

6. Antes de instalar un disco duro SATAII en el conector SATAII, consulte la

sección “Guía de instalación de discos duros SATAII” en la página 27

del “Manual de usuario” que se incluye en el CD de soporte para

configurar su disco duro SATAII en modo SATAII. También puede conectar

un disco duro SATA directamente al conector SATAII.

7. Es una herramienta de overclocking de ASRock de usuario-fácil que le

permite a supervisar su sistema por la función de monitor de hardware

y overclock sus dispositivos de hardware para obtener el mejor

funcionamiento del sistema bajo el entorno de Windows®. Por favor

visite nuestro sitio web para los procedimientos de operación de

Sintonizador de ASRock OC.

Sitio web de ASRock: http://www.asrock.com

8. Gracias a su avanzado hardware de propietario y diseño de software,

Intelligent Energy Saver (Economizador de energía inteligente) es

una revolucionaria tecnología que ofrece un ahorro de energía sin

igual. El regulador de voltaje permite reducir el número de fases de

salida para mejorar la eficiencia cuando los núcleos de la CPU

están inactivos. En otras palabras, permite ofrecer un ahorro

excepcional de energía y mejorar la eficiencia energética sin

sacrificar el rendimiento del equipo. Para utilizar la función Intelligent

Energy Saver (Economizador de energía inteligente) , active la opción

Cool ‘n’ Quiet en la configuración de BIOS. Visite nuestro sitio web

para conocer los procedimientos de uso de Intelligent Energy Saver

(Economizador de energía inteligente).

Sitio web de ASRock: http://www.asrock.com

9. ASRock Instant Flash es una utilidad de programación del BIOS que se

encuentra almacenada en la memoria Flash ROM. Esta sencilla herramienta

de actualización de BIOS le permitirá actualizar el BIOS del sistema sin

necesidad de acceder a ningún sistema operativo, como MS-DOS o

Windows®. Gracias a esta utilidad, sólo necesitará pulsar <F6> durante la

fase POST o pulsar <F2> para acceder al menú de configuración del BIOS

y a la utilidad ASRock Instant Flash. Ejecute esta herramienta y guarde el

archivo correspondiente al sistema BIOS nuevo en su unidad flash USB,

unidad de disco flexible o disco duro para poder actualizar el BIOS con

6969

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

sólo pulsar un par de botones, sin necesidad de preparar un disco

flexible adicional ni utilizar complicadas utilidades de programación.

Recuerde que la unidad flash USB o disco duro utilizado debe dis-

poner del sistema de archivos FAT32/16/12.

10. El nombre del propio software, OC DNA, indica con claridad aquello de

lo que es capaz. OC DNA, una exclusiva utilidad desarrollada por

ASRock, representa para el usuario una forma cómoda de grabar su

configuración de OC y compartirla con otras personas. Esta utilidad le

permitirá guardar sus registros de aceleración en el sistema operativo

y simplificar el complicado proceso de grabación de la configuración

de aceleración. ¡Gracias a OC DNA podrá guardar su configuración de

OC como perfil y compartirlo con sus amigos! ¡Sus amigos podrán

cargar entonces el perfil de OC en su propio sistema y disfrutar de la

configuración de OC creada por usted! Recuerde que el perfil de OC

creado sólo funcionará en placas base similares, por lo que sólo podrá

compartirlo con usuarios que cuenten con la misma placa base que

usted.

11. Si desea una forma más rápida y menos limitada de cargar sus

dispositivos de Apple; como por ejemplo iPhone, iPod o iPad Touch,

ASRock ha creado una fantástica solución para usted: ASRock APP

Charger. Simplemente mediante la instalación del controlador de APP

Charger, podrá cargar su iPhone de forma mucho más rápida que

antes, hasta un 40%, desde su equipo. ASRock APP Charger le permite

cargar de forma rápida muchos dispositivos de Apple simultáneamente

e incluso podrá continuar la carga cuando su PC entre en modo de

espera (S1), suspendido en RAM (S3), modo de hibernación (S4) o se

apague (S5). Una vez instalado el controlador de APP Charger, podrá

disfrutar fácilmente de una fantástica carga sin precedentes.

Sitio web de ASRock: http://www.asrock.com/Feature/AppCharger/index.

asp

12. ASRock XFast USB puede aumentar el rendimiento de los dispositivos

de almacenamiento USB. El rendimiento depende de las propiedades

del dispositivo.

13. ASRock XFast LAN proporciona un acceso a Internet mas rapido, que

incluye las ventajas que se indican a continuacion. Priorizacion de

aplicaciones LAN: Puede confi gurar la prioridad de las aplicaciones de

forma ideal y/o agregar nuevos programas. Menor latencia en los

juegos: Despues de aumentar la prioridad de los juegos en linea, se

puede reducir la latencia en los mismos. Gestionar el trafi co: Puede

ver video en alta defi nicion de Youtube y descargar archivos

simultaneamente. Analisis de sus datos en tiempo real: Con la ventana

de estado, puede reconocer facilmente que transmisiones en

secuencias se estan trans-fi riendo actualmente.

EspañolEspañol

Español

7070

70 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EspañolEspañol

Español

14. Aunque esta placa base ofrece un control complete, no es

recomendable forzar la velocidad. Las frecuencias de bus de la CPU

distintas a las recomendadas pueden causar inestabilidad en el

sistema o dañar la CPU.

15. Cuando la temperatura de CPU está sobre-elevada, el sistema va a

apagarse automaticamente. Antes de reanudar el sistema, compruebe

si el ventilador de la CPU de la placa base funciona apropiadamente y

desconecte el cable de alimentación, a continuación, vuelva a conectarlo.

Para mejorar la disipación de calor, acuérdese de aplicar thermal grease

entre el procesador y el disipador de calor cuando usted instala el

sistema de PC.

16. EuP, siglas de Energy Using Product (Producto que Utiliza Energía),

es una disposición regulada por la Unión Europea para establecer el

consumo total de energía de un sistema. Según la disposición EuP,

la alimentación de CA total para el sistema completo ha de ser

inferior a 1,00W en modo apagado. Para cumplir con el estándar

EuP, se requieren una placa base y una fuente de alimentación que

cumplan con la directiva EuP. Según las directrices de Intel, una

fuente de alimentación que cumpla con la directiva EuP debe

satisfacer el estándar, es decir, la eficiencia de energía de 5v en

modo de espera debería ser mayor del 50% con un consumo de

corriente de 100mA. Para seleccionar una fuente de alimentación

que cumpla la directiva EuP, le recomendamos que consulte con el

fabricante de la fuente de alimentación para obtener más detalles.

7171

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1.3 Setup de Jumpers1.3 Setup de Jumpers

1.3 Setup de Jumpers

La ilustración muestra como los jumpers son

configurados. Cuando haya un jumper-cap

sobre los pins, se dice gue el jumper está

“Short”. No habiendo jumper cap sobre los pins,

el jumper está “Open”. La ilustración muesta

un jumper de 3 pins cuyo pin 1 y pin 2 están

“Short”.

Jumper Setting

PS2_USB_PW1 Ponga en cortocircuito pin 2,

(vea p.2, No. 1) pin 3 para habilitar +5VSB

(standby) para PS/2 o USB

wake up events.

Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la

fuente de electricidad.

Short Open

Valor

predeterminado

Restablecimiento

de la CMOS

Limpiar CMOS

(CLRCMOS1, jumper de 3 pins)

(ver p.2, No. 9)

Atención: CLRCMOS1 permite que Usted limpie los datos en CMOS. Los datos en

CMOS incluyen informaciones de la configuración del sistema, tales como

la contraseña del sistema, fecha, tiempo, y parámetros de la configuración

del sistema. Para limpiar y reconfigurar los parametros del sistema a la

configuración de la fábrica, por favor apague el computador y desconecte el

cable de la fuente de electricidad, utilice una cubierta de jumper para aislar

las agujas pin2 y pin3 en CLRCMOS1 durante 5 segundos. Por favor acuérdase

de quitar el jumper cap después de limpiar el COMS. Por favor acuérdase de

quitar el jumper cap después de limpiar el COMS. Si necesita borrar la

CMOS cuando acabe de finalizar la actualización de la BIOS, debe arrancar

primero el sistema y, a continuación, apagarlo antes de realizar la acción de

borrado de CMOS.

EspañolEspañol

Español

7272

72 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EspañolEspañol

Español

Estos cuatro conectores de la

Serie ATA (SATAII) soportan

HDDs SATA o SATAII para

dispositivos de almacenamiento

interno. La interfaz SATAII actual

permite una velocidad de

transferencia de 3.0 Gb/s.

Conexiones de serie ATAII

(SATAII_1 (PORT 0):

vea p.2, No. 17)

(SATAII_2 (PORT 1):

vea p.2, No. 16)

(SATAII_3 (PORT 2):

vea p.2, No. 13)

(SATAII_4 (PORT 3):

vea p.2, No. 14)

Cable de datos de Cualquier extremo del cable de

serie ATA (SATA) los datos de SATA puede ser

(Opcional) conectado con el disco duro

de SATA / SATAII o el

conectador de SATAII en esta

placa base.

la banda roja debe quedar

en el mismo lado que el

contacto 1

Conector azul

a placa madre

Conector negro

a aparato IDE

Cable ATA 66/100/133 de conducción 80

1.4 Conectores1.4 Conectores

1.4 Conectores

Los conectores no son jumpers. Por favor no ponga jumper caps

sobre los conectores. El colocar cubiertas de puentes sobre los

conectores provocará un daño permanente en la placa base.

Conector Figure Descripción

Conector de disquetera

(33-pin FLOPPY1)

(vea p.2, No. 21)

Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que

el contacto 1 de la conexión.

IDE conector primario (azul)

(39-pin IDE1, vea p.2, No. 10)

Atención: Consulte las instrucciones del distribuidor del dispositivo IDE para conocer

los detalles.

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

7373

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Cabezal USB 2.0 Además de cuatro puertos

(9-pin USB6_7) USB 2.0 predeterminados en el

(ver p.2, No. 19) panel de E/S, hay dos bases

de conexiones USB 2.0 en

esta placa base. Cada una de

(9-pin USB4_5) estas bases de conexiones

(ver p.2, No. 18) admite dos puertos USB 2.0.

Conector de audio de panel Este es una interface para

frontal cable de audio de panel frontal

(9-pin HD_AUDIO1) que permite conexión y control

(vea p.2, No. 23) conveniente de apparatos de

Audio.

Cabecera de puerto de impresora Esta es una interfaz de puerto

(LPT1 de 25 terminales) para cable de impresora que

(vea p.2, N. 22) permite conectar cómodamente

dispositivos de impresión.

1. El Audio de Alta Definición soporta la detección de conector, pero el cable

de panel en el chasis debe soportar HDA para operar correctamente. Por

favor, siga las instrucciones en nuestro manual y en el manual de chasis

para instalar su sistema.

2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del

panel frontal de la siguiente manera:

A. Conecte Mic_IN (MIC) a MIC2_L.

B. Conecte Audio_R (RIN) a OUT2_R y Audio_L (LIN) en OUT2_L.

C. Conecte Ground (GND) a Ground (GND).

D. MIC_RET y OUT_RET son sólo para el panel de sonido HD. No

necesitará conectarlos al panel de sonido AC’97.

E. Activación del micrófono frontal.

En sistemas operativos Windows® XP / XP 64-bit:

Seleccione “Mixer” (Mezclador). Seleccione “Recorder” (Grabadora). A

continuación, haga clic en “FrontMic” (Micrófono frontal).

EspañolEspañol

Español

7474

74 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

EspañolEspañol

Español

Conector del Panel del Este conector acomoda varias

systema funciones de panel frontal del

(9-pin PANEL1) systema.

(vea p.2, No. 15)

Cabezal del altavoz del chasis Conecte el altavoz del chasis a

(4-pin SPEAKER1) su cabezal.

(vea p.2, No. 8)

Conector del ventilador Conecte el cable del ventilador

de la CPU de la CPU a este conector y

(4-pin CPU_FAN1) haga coincidir el cable negro

(vea p.2, No. 6) con el conector de tierra.

En sistemas operativos Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit:

Acceda a la ficha “FrontMic” (Micrófono frontal) del panel de control

Realtek. Ajuste la posición del control deslizante “Recording Volume”

(Volumen de grabación).

Conectores de ventilador de chasis

y alimentación

(3-pin CHA_FAN1)

(vea p.2, N. 20)

(3-pin PWR_FAN1)

(vea p.2, N. 28)

Por favor, conecte los cables del

ventilador a los conectores de

ventilador, haciendo coincidir el

cable negro con la patilla de

masa.

Aunque esta placa base proporciona compatibilidad para un ventilador

(silencioso) de procesador de 4 contactos, el ventilador de procesador de 3

contactos seguirá funcionando correctamente incluso sin la función de control

de velocidad del ventilador. Si pretende enchufar el ventilador de procesador

de 3 contactos en el conector del ventilador de procesador de esta placa base,

conéctelo al contacto 1-3.

Contacto 1-3 conectado

Instalación del ventilador de 3 contactos

7575

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Cabezal de alimentación ATX Conecte la fuente de

(24-pin ATXPWR1) alimentación ATX a su cabezal.

(vea p.2, No. 7)

Instalación de una Fuente de Alimentación ATX de 20 Pins

A pesar de que esta placa base incluye in conector de

alimentación ATX de 24 pins, ésta puede funcionar incluso

si utiliza una fuente de alimentación ATX de 20 pins tradicional.

Para usar una fuente de alimentación ATX de 20 pins, por favor,

conecte su fuente de alimentación usando los Pins 1 y 13.

Conector de ATX 12V power Tenga en cuenta que es

(4-pin ATX12V1) necesario conectar este

(vea p.2, No. 2) conector a una toma de corriente

con el enchufe ATX 12V, de

modo que proporcione suficiente

electricidad. De lo contrario no

se podrá encender.

EspañolEspañol

Español

7676

76 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

2. BIOS Información2. BIOS Información

2. BIOS Información

El Flash Memory de la placa madre deposita SETUP Utility. Durante el Power-Up

(POST) apriete <F2> para entrar en la BIOS. Sí usted no oprime ninguna tecla, el

POST continúa con sus rutinas de prueba. Si usted desea entrar en la BIOS

después del POST, por favor reinicie el sistema apretando <Ctl> + <Alt> +

<Borrar>, o apretando el botón Reset en el panel del ordenador. El programa

SETUP esta diseñado a ser lo mas fácil posible. Es un programa guiado al menu,

es decir, puede enrollarse a sus varios sub-menues y elegir las opciones

predeterminadas. Para información detallada sobre como configurar la BIOS, por

favor refiérase al Manual del Usuario (archivo PDF) contenido en el CD.

3.Información de Software Support CD3.Información de Software Support CD

3.Información de Software Support CD

Esta placa-base soporta diversos tipos de sistema operativo Windows®: 7 / 7 64 bits

/ VistaTM / VistaTM 64 bits / XP / XP Media Center / XP 64 bits El CD de instalación que

acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y

configurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y

se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en

su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-

pulse en el archivo ASSETUP.EXE para iniciar la instalación.

EspañolEspañol

Español

7777

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

7878

78 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

7979

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8080

80 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8181

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8282

82 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8383

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8484

84 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

8585

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8686

86 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8787

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8888

88 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

8989

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1. Introdução1. Introdução

1. Introdução

Gratos por comprar nossa placa–mãe 985GM-GS3 FX / 985GM-S3 FX, um produto

confiável feito com ASRock um estrito controle de qualidade consistente. Com um

excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock

de compromisso com a qualidade e durabilidade.

Este Guia de Instalação Rápida apresenta a placa-mãe e o guia de instalação passo a

passo. Mais informações detalhadas sobre a placa-mãe podem ser encontradas no

manual do usuário do CD de suporte.

Porque as especificações da placa mãe e o software de BIOS poderiam ser

atualizados, o conteúdo deste manual pode ser cambiado sem aviso. Em caso de

qualquer modificação deste manual, a versão atualizada estará disponível no

website de ASRock sem prévio aviso. Pode também encontrar as listas das mais

recentes placas VGA e das CPUs suportadas no site da web da ASRock.

Website de ASRock http://www.asrock.com

Se precisar de apoio técnico em relação a este placa-mãe, por favor visite o nosso

sítio da internet para informação específica acerca do modelo que está a utilizar.

www.asrock.com/support/index.asp

1.1 Este pacote contém1.1 Este pacote contém

1.1 Este pacote contém

Placa-mãe ASRock 985GM-GS3 FX / 985GM-S3 FX

(Formato Micro ATX: 9,6 pol. x 7,2 pol., 24,4 cm x 18,3 cm)

Guia de instalação rápida da ASRock 985GM-GS3 FX / 985GM-S3 FX

CD de suporte da placa ASRock 985GM-GS3 FX / 985GM-S3 FX

Dois cabo de dados ATA Serial (SATA) (Opcional)

Uma proteção I/O

PortuguêsPortuguês

Português

9090

90 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

1.2 Especificações1.2 Especificações

1.2 Especificações

Plataforma - Formato Micro ATX: 9,6 pol. x 7,2 pol., 24,4 cm x 18,3 cm

- Condensador Solid para alimentação da CPU

CPU - Suporte para processadores Socket AM3+

- Suporte para processadores AM3: Processador AMD

PhenomTM II X6 / X4 / X3 / X2 (exceto 920 / 940) / Athlon II X4

/ X3 / X2 / Sempron

- Preparado para CPU de oito núcleos

- Suporta a tecnologia AMD OverDriveTM com ACC (Advanced

Clock Calibration)

- Pronto para AMD LIVE!TM

- Suporta a tecnologia AMD Cool ‘n’ QuietTM

- FSB de 2600 MHz (5,2 GT/s)

- Suporta a tecnologia Untied Overclocking (veja o AVISO 1)

- Suporta a tecnologia Hyper-Transport 3.0 (HT 3.0)

Chipsets - North Bridge: AMD 785G

- South Bridge: AMD SB710

Memória - Suporte à tecnologia de memória de duplo canal

(veja o AVISO 2)

- 2 x slots de DDR3 DIMM

- Suporte para memória não intermédia DDR3 1800(OC)/

1600(OC)/1333/1066/800, não ECC (veja o AVISO 3)

- Capacidade máxima de memória do sistema: 8GB

(veja o AVISO 4)

Slots de Expansão - 1 x slot de PCI Express 2.0 x16 (modo azul @ x16)

- 1 x slot de PCI Express 2.0 x1

- 2 x slots de PCI

- Suporta AMD Hybrid CrossFireXTM

VGA integrado - Placa gráfica AMD Radeon HD 4200 integrada

- DX10.1 class iGPU, Pixel Shader 4.1

- Memória partilhada máxima 512MB (veja o AVISO 5)

- Suporta D-Sub com resolução máxima até 2048x1536 @

60 Hz

Áudio - Áudio de alta definição de canal 5.1

(Codec de áudio Realtek ALC662)

LAN - 985GM-GS3 FX

Realtek PCIE x1 Gigabit LAN RTL8111E,

velocidade 10/100/1000 Mb/s

- 985GM-S3 FX

9191

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Realtek PCIEx1 LAN 8105EL, velocidade 10/100 Mb/s

- Suporta Wake-On-LAN

- Suporta PXE

Entrada/Saída I/O Panel

pelo painel - 1 x porta para mouse PS/2

traseiro - 1 x porta para teclado PS/2

- 1 x porta COM1

- 1 x porta VGA

- 4 x portas USB 2.0 padrão

- 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED

VELOCIDADE)

- Áudio Jack: saída / entrada de linha / microfone + porta

de jogos

Conectores - 4 x conectores SATA2, suporte a taxa de transferência

de dados de até 3,0 Gb/s, suporte RAID (RAID 0, RAID 1,

RAID 10, JBOD), NCQ, AHCI e “conexão a quente”

(veja o AVISO 6)

- 1 x conectores ATA133 IDE (suporta até 2 dispositivos IDE)

- 1 x porta para disquete

- 1 x Conector de Porta de Impressão

- Conector do ventilador da CPU/chassis/energia

- Conector de força do ATX de 24 pinos

- Conector ATX 12 V de 4 pinos

- Conector Áudio do painel frontal

- 2 x cabezal USB 2.0 (suportar 4 portas USB 2.0

adicionais)

BIOS - 8Mb BIOS AMI

- BIOS AMI

- Suporta dispositivos “Plug and Play”

- ACPI 1.1 atendendo a eventos de “wake up”

- Suporta dispositivos sem jumper

- Suporte para SMBIOS 2.3.1

- CPU, VCCM, NB Voltage Multi-adjustment

CD de suporte - Controladores, utilitários, software antivírus

(Experimentacao Versao), CyberLink MediaEspresso 6.5

versão de demonstração, Navegador Google Chrome e Barra

de Ferramentas

Funcionalidade - Sintonizador ASRock OC (veja o AVISO 7)

Única - ASRock Poupança de Energia Inteligente (veja o AVISO 8)

- ASRock Instant Boot

- ASRock Instant Flash (veja o AVISO 9)

PortuguêsPortuguês

Português

9292

92 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

AVISO

Tenha em atenção que a operação de overclocking envolve alguns riscos,

nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da

tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking

de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até

mesmo causar danos ao nível dos componentes e dispositivos que integram o

sistema. Esta operação é da total responsabilidade do utilizador. Não nos

responsabilizamos pelos possíveis danos resultantes do overclocking.

- ASRock OC DNA (veja o AVISO 10)

- ASRock APP Charger (veja o AVISO 11)

- ASRock XFast USB (veja o AVISO 12)

- ASRock XFast LAN (veja o AVISO 13)

- Booster híbrido:

- Frequência da CPU com controle contínuo

(veja o AVISO 14)

- ASRock U-COP (veja o AVISO 15)

- B.F.G. (Boot Failure Guard)

Monitor do HW - Sensores de temperature do procesador

- Medição de temperatura da placa-mãe

- Tacômetros de ventilador do Processador/chassis/energia

- Ventoinha silenciosa para a CPU

- Monitoramento de voltagem : +12 V, +5 V, +3.3 V, Vcore

Sistema - Microsoft® Windows® 7 / 7 de 64 bits / VistaTM /

Operacional VistaTM de 64 bits / XP / Centro de multimedia XP / XP de 64

bits

Certificações - FCC, CE, WHQL

- “ErP/EuP Ready” (é necessária alimentação eléctrica “ErP/

EuP Ready”) (veja o AVISO 16)

* Para informações mais detalhadas por favor visite o nosso sítio Web:

http://www.asrock.com

9393

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

AVISO!

1. Esta placa principal suporta a tecnologia Untied Overclocking.

Consulte a secção “Tecnologia Untied Overclocking” na página 24

para mais informações.

2. Esta placa-mãe suporta a tecnologia de memória de duplo canal.

Antes de implementar a tecnologia de memória de duplo canal,

certifique-se de ler o guia de instalação dos módulos de memória

na página 13 para a instalação correta.

3. O suporte de uma memória com uma velocidade de 1800/1600 MHz

depende da CPU AM3/AM3+ que adoptar. Se quiser adoptar um

módulo de memória DDR3 1800/1600 para utilização com esta

placa principal, consulte a lista de memória suportada no nosso

web site para saber quais os módulos de memória compatíveis.

Web site da ASRock http://www.asrock.com

4. Devido às limitações do sistema operativo, o tamanho real da memória

pode ser inferior a 4 GB uma vez que uma parte desta está reservada

para utilização pelo sistema operativo no âmbito do Windows® 7 /

VistaTM / XP. No caso da CPU de 64 bits do Windows® OS, esta

limitação não existe.

5. O máximo tamanho de memória compartilhada é definido por

vendedor de chipset e é sujeito a mudar. Verifique o AMD website

para a última informação.

6. Antes de instalar o disco duro SATAII no conector SATAII, por favor leia

o “Guia de Instalação do Disco duro SATAII” na página 27 do Manual

do Usuário no CD de suporte, para definir a sua unidade de disco

duro SATAII com o modo SATAII. Também pode ligar directamente o

disco duro SATA ao conector SATAII.

7. É uma ferramenta de overclocking da ASRock fácil de utilizar que lhe

permite vigiar i seu sistema via a função de monitorização de

hardware e proceder ao overclock dos dispositivos de hardware para

obter o melhor desempenho em ambiente Windows®. Por favor visite

o nosso sítio Web para conhecer os procedimentos de

funcionamento do Sintonizador ASRock OC.

Sítio Web da ASRock: http://www.asrock.com

8. Com um hardware de propriedades e concepção de software

avançadas, a Intelligent Energy Saver é uma tecnologia

revolucionária que proporciona poupanças de energia inéditas. O

regulador de voltagem pode reduzir o número de fases de saída

para melhorar a eficiência quando os núcleos do CPU estão

inactivos. Por outras palavras, pode providenciar uma excepcional

poupança de energia e melhorar a eficiência energética sem

sacrificar o desempenho. Para utilizar a função Poupança de

Energia, por favor active a opção Cool ‘n’ Quiet na configuração da

BIOS primeiro. Por favor visite o nosso sítio Web para conhecer os

procedimentos de funcionamento da Poupança de Energia

Inteligente. Sítio Web da ASRock: http://www.asrock.com

PortuguêsPortuguês

Português

9494

94 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

9. ASRock Instant Flash est un utilitaire de flash du BIOS flash intégré

dans la ROM Flash. Cet outil pratique de mise à jour du BIOS vous

permet de mettre à jour le BIOS du système sans entrer d’abord

dans un système d’exploitation tel que MS-DOS ou Windows®. Avec

cet utilitaire, vous pouvez appuyer sur la touche <F6> pendant le

POST ou sur la touche <F2> durant le menu de configuration du BIOS

pour accéder à ASRock Instant Flash. Lancez simplement cet outil et

enregistrez le nouveau fichier BIOS sur votre lecteur flash USB, sur

une disquette ou un disque, avant de pouvoir mettre à jour votre BIOS

en quelques clics seulement, sans préparer de disquette

supplémentaire ni d’autre utilitaire flash compliqué. Veuillez noter

que le lecteur flash USB ou le disque dur doit utiliser le système de

fichiers FAT32/16/12.

10. O próprio nome do software – OC DNA diz-lhe literalmente aquilo de

que é capaz. OC DNA, um utilitário exclusivo desenvolvido pela

ASRock, proporciona uma forma conveniente para o utilizador gravar

as definições OC e partilhar com outros. Ajuda-o a guardar o seu

registo de “overclocking” (aumento da frequência do processador)

no sistema operativo e simplifica o complexo processo de gravação

das definições de “overclocking”. Com OC DNA, pode guardar as

suas definições OC como perfil e partilhá-las com os seus amigos!

Depois, os seus amigos podem carregar o perfil OC no seu próprio

sistema para obter as mesmas definições OC que você tem! Por

favor, tenha em conta que o perfil OC só pode ser partilhado e

trabalhado na mesma placa-mãe.

11. Se pretende carregar os seus dispositivos Apple, como o iPhone/

iPod/iPad Touch, de forma mais rápida e menos limitada, a ASRock

preparou para si uma solução fantástica, o ASRock APP Charger.

Instale o controlador APP Charger para que o seu iPhone carregue

mais rapidamente a partir do computador, até 40% mais rápido do

que antes. O ASRock APP Charger permite-lhe carregar rapidamente

vários dispositivos Apple em simultâneo e suporta até o

carregamento quando o seu PC entrar em modo de Espera (S1),

Suspensão (S3), Hibernação (S4) ou desligado (S5). Com o

controlador APP Charger instalado, poderá desfrutar facilmente da

melhor experiência de carregamento.

Web site da ASRock: http://www.asrock.com/Feature/AppCharger/

index.asp

12. O ASRock XFast USB pode aumentar a velocidade dos dispositivos

de armazenamento USB. A velocidade poderá depender das

propriedades dos dispositivos.

9595

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

13. A ASRock XFast LAN proporciona um acesso à Internet mais rápido,

que inclui os benefícios abaixo. Prioritização de Aplicações LAN: O

utilizador pode configurar a prioridade da aplicação de forma ideal e/

ou pode adicionar novos programas. Menor Latência nos Jogos:

Depois de definir maior prioridade para o jogo on-line, pode baixar a

latência no jogo. Traffic Shaping: Pode assistir a vídeos do Youtube

em HD e transferir ficheiros em simultâneo. Análise em tempo real

dos seus dados: Com a janela de estado, pode reconhecer

facilmente os fluxos de dados das suas transferências actuais.

14. Apesar de esta placa-mãe oferecer controle continuamente variável,

não se recomenda efetuar over-clock. Freqüências de barramento

diferentes das recomendadas para a CPU podem provocar

instabilidade do sistema ou danos à CPU.

15. Assim que se detecta um superaquecimento na CPU, o sistema se

desliga automaticamente e o botão de energia do chassis fica

inativo.Cheque o ventilador da CPU na placa–mãe, para verificar se

está funcionando corretamente antes de religar o sistema. Para

melhorar a dissipação de calor, lembre-se de aplicar o material de

interface térmica entre o processador e o dissipador de calor.

16. EuP, que significa Energy Using Product (Produto que Utiliza

Energia), foi uma provisão regulada pela União Europeia para definir

o consumo de energia para o sistema concluído. De acordo com a

EuP, a corrente AC total do sistema concluído deverá ser inferior a 1.

00W no estado de modo desligado. Para satisfazer a norma EuP, é

necessário uma placa-mãe e uma fonte de alimentação eléctrica

que estejam em conformidade com a norma EuP. De acordo com a

sugestão da Intel, a fonte de alimentação em conformidade com a

norma EuP deve satisfazer o padrão, isto é, a eficiência energética

de reserva de 5V deve ser superior a 50% com um consumo de

corrente de 100 mA. Para selecção da fonte de alimentação em

conformidade com a norma EuP, recomendamos que confirme com

o fabricante da fonte de alimentação para mais detalhes.

9696

96 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

1.3 Configuração dos Jumpers1.3 Configuração dos Jumpers

1.3 Configuração dos Jumpers

A ilustração mostra como os jumpers são

configurados. Quando há uma capa de

jumpers sobre os pinos, diz–se que o jumper

está “curto”. Não havendo capa sobre os pinos,

o jumper está “aberto”. A ilustração mostra um

jumper de 3 pinos em que os pinos 1 e 2 están

“curtos” quando a capa de jumper estiver

colocada sobre esses 2 pinos.

Jumper Configuração

PS2_USB_PW1 Pin2, Pin3 curtos para

(veja a folha 2, No. 1) habilitar +5VSB (stand by)

para PS/2 ou eventos de

wake up na USB.

Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais.

Restaurar CMOS

(CLRCMOS1, jumper de 3 pinos)

(veja a folha 2, No. 9)

Nota: CLRCMOS1 permite você limpar os dados em CMOS. Os dados em CMOS

incluem informações da configuração do sistema como: por exemplo a senha do

sistema, data, tempo, e os parámetros da configuração do sistema. Para limpar

e reconfigurar os parámetros do sistema a configuração inicial da fábrica, por

favor desligue o cabo de força, ponha em curto–circuito os pin 2 e pin 3 de

CLRCMOS1 por mais de 5 segundos para limpar o CMOS usando um jumper.

Por favor lembrese de remover o jumper depois de limpar o COMS. Se precisar

limpar o CMOS ao concluir a atualização do BIOS, deverá reiniciar o sistema

primeiro e, em seguida, desligá-lo antes de executar a ação de limpeza o CMOS.

Short Open

Configuração-

padrão

Limpar o CMOS

9797

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

1.4 Conectores1.4 Conectores

1.4 Conectores

Os conectores NÃO SÃO jumpers. NÃO coloque capas de jumper

sobre estes conectores. A colocação de pontos de jumper sobre os

conectores causará danos irreversíveis à placa-mãe.

Conector Figura Descrição

Conector FDD

(FLOPPY 1, 33 pinos)

(veja a folha 2, No. 21)

Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao

lado Pino 1 do conector.

Conector primário (Azul)

(IDE1 de 39 pinos, veja a folha 2, No. 10)

Ligue esta ponta (azul) Ligue esta ponta (preta)

à placa–mãe aos dispositivos IDE

Cabo ATA 66/100/133 de 80 condutores

Nota: Para detalhes, consulte as instruções do fornecedor do seu dispositivo

IDE.

Conectores ATAII Serial Estes quatro conectores Serial

(SATAII_1 (PORT 0): ATA (SATAII) suportam

veja a folha 2, No. 17) unidades de disco rígido SATA

(SATAII_2 (PORT 1): ou SATAII como dispositivos de

veja a folha 2, No. 16) armazenamento internos. A

(SATAII_3 (PORT 2): atual interface SATAII permite

veja a folha 2, No. 13) uma taxa de transferência de

(SATAII_4 (PORT 3): dados de até 3.0 Gb/s.

veja a folha 2, No. 14)

Cabo de dados Tanto a saída do cabo de Serial

ATA (SATA) dados SATA pode ser

(opcional) conectado ao disco rígido

SATA / SATAII quanto o

conector SATAII na placa mãe.

o lado com listras vermelhas para o

Pino 1

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

9898

98 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

Cabezal USB 2.0 Além das quatro portas USB

(USB6_7 de 9 pinos) 2.0 por defeito no painel de

(veja a folha 2, No. 19) entrada/saída, há duas

ligações USB 2.0 nesta placa-

mãe. Cada ligação USB 2.0

pode suportar duas portas USB

(USB4_5 de 9 pinos) 2.0.

(veja a folha 2, No. 18)

Conector de Porta de Impressão Esta é uma interface para um

(LPT1 de 25 pinos) cabo de porta de impressão

(veja a folha 2, No. 22) que permite uma ligação

prática para dispositivos de

impressão.

Conector Áudio do painel Esta é uma interface para o

frontal cabo de áudio no painel frontal,

(HD_AUDIO1 de 9 pinos) que permite uma conexão e

(veja a folha 2, No. 23) controle convenientes dos

dispositivos de áudio.

1. Áudio de elevada definição que suporta a sensibilidade da tomada, mas

o fio do painel existente no chassis tem de suportar HDA para funcionar

correctamente. Siga s instruções que aparecem no manual e no manual

do chassis para instalar o sistema.

2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do

painel frontal, como a figura abaixo mostra:

A. Ligue o Mic_IN (MIC) ao MIC2_L.

B. Ligue o Audio_R (RIN) ao OUT2_R e o Audio_L (LIN) ao OUT2_L.

C. Ligue o Ground (GND) ao Ground (GND).

D. MIC_RET e OUT_RET são apenas para o painel de áudio HD. Não

necessita de os ligar para o painel de áudio AC’97.

E. Para activar o microfone frontal

Para Windows® XP / XP 64-bit OS:

Clique em “Mixer”. Clique em “Recorder”. Clique em “FrontMic”.

Para Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:

Vá ao separador “FrontMic” (Microfone Frontal) no painel de controlo

Realtek. Clique em “Recording Volume”.

9999

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

Conector do sistema no Este conector acomoda

painel diversas funções de

(PANEL1 de 9 pinos) sistema no painel frontal.

(veja a folha 2, No. 15)

Conector do alto-falante Ligue o alto-falante do chassi do

chassi neste conector.

(SPEAKER1 de 4 pinos)

(veja a folha 2, No. 8)

Conector do ventilador da Ligue o cabo do ventilador da

CPU CPU, coincidindo o fio preto com

(CPU_FAN1 de 4 pinos) o pino de aterramento.

(veja a folha 2, No. 6)

Conector do ventilador do Ligue o cabo do ventilador neste

chassis e energia conector, coincidindo o fio preto

(CHA_FAN1 de 3 pinos) com o pino de aterramento.

(veja a folha 2, No. 20)

(PWR_FAN1 de 3 pinos)

(veja a folha 2, No. 28)

Apesar de esta placa-mãe possuir 4 apoios para uma ventoinha de CPU

(Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá

funcionar mesmo sem a função de controlo de velocidade da ventoinha. Se

pretender ligar uma ventoinha de 3 pinos para CPU ao conector de

ventoinha do CPU nesta placa-mãe, por favor, ligue-a aos pinos 1-3.

Instalação de Ventoinha de 3 pinos

Pinos 1-3 ligados

Conector de força do ATX Ligue a fonte de alimentação

(ATXPWR1 de 24 pinos) ATX neste conector.

(veja a folha 2, No. 7)

100100

100 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PortuguêsPortuguês

Português

Embora esta placa-mãe providencie um conector de energia

ATX de 24 pinos, pode apesar disso funcionar com a

adapta-ção de uma fonte de energia tradicional de 20 pinos.

Para usar a fonte de alimentação de 29 pinos, por favor ligue

a sua fonte de alimentação com o Pino 1 e o Pino 13.

Instalação da Fonte de alimentação ATX de 20 Pinos

Conector ATX 12 V Note que é necessário ligar

(ATX12V1 de 4 pinos ) uma fonte de alimentação com

(veja a folha 2, No. 2) conector ATX 12V neste

conector para fornecer

alimentação suficiente. Do

contrário, haverá falhas de

funcionamento.

2. Informações da BIOS2. Informações da BIOS

2. Informações da BIOS

A Memória Flash da placa–mãe armazena o utilitário de configuração da BIOS.

Quando você ligar o computador, pressione < F2 > durante a inicialização (POST) para

entrar nas configurações da BIOS; caso contrário o POST continua com suas rotinas de

teste. Caso você queira entrar nas configurações da BIOS após o POST, reinicie o

sistema pressionando <Ctrl> + <Alt> +<Del>, ou pressionando a tecla de reset no

gabinete. Também se pode reinicializar desligando a máquina e ligando–a novamente.

Para informações mais detalhadas sobre a configuração da BIOS, consulte o manual do

usuário (em pdf) contido no CD de instalação.

3. Informações do CD de Suporte3. Informações do CD de Suporte

3. Informações do CD de Suporte

Esta placa Mãe suporta vários sistemas operacionais: Microsoft® Windows®: XP / Centro

de multimedia XP / XP de 64 bits / VistaTM / VistaTM de 64 bits / Win7. O CD de

instalação que acompanha a placa Mãe contem: drivers e utilitários necessários

para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação,

introduza o CD na leitora de CD-ROM do computador. Automaticamente iniciará o

menu principal, casa o “AUTORUN” esteja ativado. Se o menu principal não aparecer

automaticamente, explore o CD e execute o “ASSETUP.EXE” localizado na pasta

“BIN”.

101101

101

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

102102

102 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

103103

103

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

104104

104 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

105105

105

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

106106

106 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

107107

107

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

OpenShort

Clear CMOSDefault

TürkçeTürkçe

Türkçe

108108

108 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

109109

109

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

110110

110 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

111111

111

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

112112

112 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

TürkçeTürkçe

Türkçe

113113

113

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

114114

114 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

‘ ’

115115

115

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

116116

116 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

“ ”

“” “

”

117117

117

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

118118

118 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

119119

119

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

“ ”

120120

120 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

121121

121

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

“” “” “”

122122

122 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

“” “

”

123123

123

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

124124

124 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

“ ”

\ \

125125

125

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

126126

126 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

‘’

127127

127

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

128128

128 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

“ ”

®®

129129

129

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

–

130130

130 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

131131

131

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

132132

132 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

133133

133

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

“” “”

“”

“ ”

134134

134 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

135135

135

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

136136

136 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

® ® TM

137137

137

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

138138

138 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

‘ ’ ™

139139

139

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

140140

140 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

® ®

141141

141

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

142142

142 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

143143

143

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

144144

144 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

145145

145

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

146146

146 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

® ®

147147

147

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

X O O O O O

148148

148 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

149149

149

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

150150

150 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

151151

151

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

® ®

152152

152 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

153153

153

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

154154

154 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

SATAII_3 SATAII_4

(PORT 2) (PORT 3)

SATAII_1 SATAII_2

(PORT 0) (PORT 1)

155155

155

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

156156

156 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

157157

157

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

® ® ®

158158

158 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1. P1. P

1. Penjelasanenjelasan

enjelasanenjelasan

enjelasan

Terimakasih untuk membeli papan induk penghasilan kontrol kualitas keras terus-

menerus ASRock’s yang dapat dipercaya. Dia dapat menyajikan pertunjukan baik

dengan bentuknya sesuai dengan janji kualitas dan ketahanan ASRock’s.

Buku Pedoman Instalasi Cepat ini mengandung perkenalan papan induk dan instalasi

langkah-demi-langkah. Informasi lebih terperinci tentang papan induk ini dapat dilihat

dalam buku tangan pemakai dalam Support CD.

Karena spesifikasi papan induk dan software BIOS barangkali dapat

diperbarui, isi dalam buku pedoman ini akan mengikuti perubahan tanpa

peringatan. Dalam kondisi terjadinya modifikasi buku pedoman ini, versi

baru akan diperlihatkan dalam website ASRock tanpa peringatan lebih. Anda

dapat mendapatkan kartu-kartu yang paling baru dan daftar bantuan CPU

pada website ASRock.

Website ASRock http://www.asrock.com

1.1 Isi P1.1 Isi P

1.1 Isi Pakak

akak

aketet

etet

Papan Induk 985GM-GS3 FX / 985GM-S3 FX ASRock

(Faktor Form Micro ATX: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm)

Pemimpin Instalasi Cepat 985GM-GS3 FX / 985GM-S3 FX ASRock

Support CD 985GM-GS3 FX / 985GM-S3 FX ASRock

2 x Kabel satu serial Data ATA (SATA) (bebas-pilih)

1 x Satu Pelindung I/O

BahasaBahasa

Bahasa

IndonesiaIndonesia

Indonesia

159159

159

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

1.21.2

1.2 SpesifikasiSpesifikasi

SpesifikasiSpesifikasi

Spesifikasi

Podium - Faktor Form Micro ATX: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm

- Kapasitor Solid untuk daya CPU

CPU - Stopkontak AM3+

- Stopkontak AM3 untuk AMD PhenomTM II X6 / X4 / X3 / X2

(kecuali 920 / 940) / Athlon II X4 / X3 / X2 / Sempron processor

- Dukungan CPUT Delapan Inti

- Mendukung AMD OverDriveTM dengan fitur ACC (Advanced

Clock Calibration [Kalibrasi Clock Lanjutan])

- AMD LIVE!TM Dipersiapkan

- Dapat digunakan AM’s Cool ‘n’ QuietTM Technology

- FSB 2600 MHz (5.2 GT/s)

- Menggunakan Teknologi Untied Overclocking

- Dapat digunakan Hyper-Transport 3.0 (HT 3.0) Technology

Grup Chip - Jembatanutara: AMD 785G

- Jembatanselatan: AMD SB710

Ingatan - Teknologi ingatan DDR3 dwisaluran

- 2 x Alur DDR3 DIMM

- Menggunakan DDR3 1800(OC)/1600(OC)/1333/1066/800

- Kapasitas paling banyak: 8GB

Alur Ekspansi - 1 x PCI Express 2.0 x16 slot (biru @ x16 mode)

- 1 x PCI Express 2.0 x1 slot

- 2 x Alur PCI

- Dapat digunakan AMD Hybrid CrossFireXTM

Diagram - Integrated AMD Radeon HD 4200 graphics

- DX10.1 class iGPU, Shader Model 4.1

- Ingatan sama Max. 512MB

- Mendukung D-Sub dengan resolusi maksimal hingga

2048x1536 @ 60Hz

Audio - 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN - 985GM-GS3 FX

Realtek PCIE x1 Gigabit LAN RTL8111E,

kecepatan 10/100/1000 Mb/s

- 985GM-S3 FX

Realtek PCIE x1 LAN 8105EL, kecepatan 10/100 Mb/s

- Menggunakan Wake-On-LAN

- Menggunakan PXE

BahasaBahasa

Bahasa

IndonesiaIndonesia

Indonesia

160160

160 ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

Papan Belakang I/O Panel

I/O - 1 x Port Mouse PS/2

- 1 x Port Keyboard PS/2

- 1 x Port Serial: COM1

- 1 x Port VGA

- 4 x Port USB 2.0 siap-dipakai

- 1 x RJ-45 LAN Port LED (ACT/LINK LED dan SPEED LED)

- HD Audio Jack: Line in/Penyuara Depan/mikropon

Penghubung - 4 x penghubung SATA2 3.0Gb/s, dapat digunakan RAID

(RAID 0, RAID 1, RAID 10, JBOD), NCQ, AHCI, dan fungsi

fungsi “Hot Plug”

- 1 x Penghubung ATA133 IDE

(menggunakan perlengkapan 2 x IDE)

- 1 x Penghubung Floppy

- 1 x port header Print

- Penghubung KIPAS CPU/casis/Power

- Penghubung power 24 pin ATX

- Penghubung power 4 pin 12V

- Penghubung audio panel dapan

- 2 x USB 2.0 header (menggunakan 4 port USB 2.0)

Ciri-ciri BIOS - 8Mb AMI BIOS

- AMI Legal BIOS

- Menggunakan “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Menggunakan jumperfree

- Penyokong AMBIOS 2.3.1

- Penyesuaian berbagai tegangan CPU, VCCM, NB

Sokongan CD - Penggerak, kegunaan, Software AntiVirus (Versi Cobaan),

CyberLink MediaEspresso 6.5 Trial, Google Chrome Browser

dan Toolbar

Fitur Unik - ASRock OC Tuner

- ASRock Penghemat Energi Pintar

- ASRock Instant Boot

- ASRock Instant Flash

- ASRock OC DNA

- ASRock APP Charger

- ASRock XFast USB

- ASRock XFast LAN

- Hybrid Booster:

BahasaBahasa

Bahasa

IndonesiaIndonesia

Indonesia

161161

161

ASRock 985GM-GS3 FX / 985GM-S3 FX Motherboard

PERHATIAN

Overclocking dapat pasti menimbulkan risiko, seperti pengaturan susunan BIOS,

penggunaan Untied Overclocking Technology, atau pemakaian perlengkapan

overclocking lain. Overclocking barangkali mengganggu stabilitas sistem Anda, atau

menimbulkan kerusakan terhadap komponen dan alat sistem Anda. Anda

seharusnya.

- Kontrol tanpa langkah Frekwensi CPU

- ASRock U-COP

- Penjaga kegagalan input (B.F.G.)

Penjaga - Perasa Suhu CPU

Hardware - Perasa Suhu Casis

- Pengukur Kipas CPU/casis/Power

- Kipas diam CPU

- Penjagaan voltasi: +12V, +5V, +3.3V, Vcore

OS - dapat digunakan Microsoft® Windows® 7 / 7 64-bit / VistaTM /

VistaTM 64-bit / XP / Pusat Media XP / XP 64-bit

Sertifikasi - FCC, CE, WHQL

- ErP/EuP Ready (memerlukan catu daya ErP/EuP ready)

BahasaBahasa

Bahasa

IndonesiaIndonesia

Indonesia

Asrock 985Gm Gs3 Fx Quick Start Guide FX_985GM S3 FX_QIG_ASR.p65

Navigation menu

Versions of this User Manual:

Views

Navigation