Atlas Sound Pm Series Users Manual ATS002583 Speakers Install Sheet

PM Series to the manual d3ea1dc7-576c-4038-9ba4-fdedecff050c

2015-02-06

: Atlas-Sound Atlas-Sound-Pm-Series-Users-Manual-500025 atlas-sound-pm-series-users-manual-500025 atlas-sound pdf

Open the PDF directly: View PDF .
Page Count: 12

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

PM Series Loudspeakers 4" and 8"

PM4FA, PM8CX, PM8FA, PM8GD

PENDANT MOUNT

LOUDSPEAKERS

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

TABLE OF CONTENTS

Safety Instructions ………………………………………………………………………………………………...3

Suspension and Mounting ………………………………………………………………………………………..3

Introduction, Features, Applications ……………………………………………………………………………..4

Suspended Installation Via Cable ………………………………………………………………………………..5

Suspended Installation Via Down Pipe .....……………………………………………………………………...9

Speciﬁcations

……………………………………………………………………………………………………

Troubleshooting

………………………………………………………………………………………………….

Notes

…………………………………………………………………………………………………………......

Warranty ………………………………………………………………………………………………………….12

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

SAFETY INSTRUCTIONS

Please Read Carefully Before Installing or Operating

• Read all instructions carefully

• Heed all warnings

• Assure that the speaker is securely mounted

Hearing Damage

CAUTION:

All professional loudspeaker systems are capable of generating very high sound pressure levels.

Use care with placement and operation to avoid exposure to excessive levels that can cause permanent

hearing damage.

SUSPENSION & MOUNTING

Suspension or "ﬂying" speaker systems requires training and expertise. Improper rigging of a ﬂying

speaker may result in injury, death, equipment damage, and legal liability. Installation must be carried

out by fully qualiﬁed installers, in accordance with all required safety codes and standards at the place of

installation.

A 5:1 design factor is a generally accepted minimum standard. However, legal requirements for overhead

suspension vary by municipality, please consult your local safety standards ofﬁce before installing any

product. We also recommend that you thoroughly check any laws and bylaws prior to installation.

Loudspeakers ﬂown in theaters, nightclubs, conference centers, or other places of work and

entertainment must be provided with an independent, correctly rated and securely attached secondary

safety — in addition to the principle suspension point(s). This secondary safety must prevent the

loudspeaker from dropping more than (6") should the principle suspension device fail. If you lack the

skills, training, and proper ancillary equipment to ﬂy a speaker system, do not attempt to do so.

• Always assure power is off to ampliﬁers before making any connections

• Assure that all electrical equipment is properly grounded

• Keep instructions for future reference

• Should any questions arise after reading this document, please call Atlas Sound Tech Support at

800-876-3333

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

PM SERIES LOUDSPEAKERS

Thank you for your purchase of an Atlas Sound PM Series

loudspeaker system. We have designed this product to be a

reliable and versatile solution to your needs for years to come.

All models include a suspension cable system and

concealment top cover to provide optimum aesthetics.

Under this cover, hook up is provided via terminal block for

70.7V/100V transformer or direct coupled 8-ohm operation. To

expand installation options the top cover also facilitates use

of standard ceiling fan mount hardware. These inexpensive

down pipe and canopy solutions are available at most Lowes

or Home Depot home improvement store under the Fantec

brand to provide installation ease regardless of ceiling

material angle.

FEATURES

• Unique design allows for suspended cable mounting, or

optional pipe mounting using standard ceiling fan hardware

• Attractive cylindrical enclosure will compliment any décor

• Distinctive top cover blends perfectly with enclosure while it conceals wiring providing a very clean

appearance

• Input terminal connection with 70.7V/100V taps and 8 ohm

APPLICATIONS

The PM Series is ideal for Retail Outlets, Auditoriums, House of Worship, and Convention Center

spaces and may be used for paging, announcements, background/foreground music, and/or internal

communications.

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

INSTALLATION VIA MOUNTING CABLES (INCLUDED)

General considerations and hardware recommendations

CAUTION: PM series models weigh as much as 21 pounds (7.9kg) – model PM8CX. A fall from almost

any height could result in serious injury or death. Assure that the speaker is ﬁrmly mounted to an object

that can handle the weight of the PM speaker. The mounting surface the PM speaker is being attached to

should be able to handle ﬁve or more times the weight of the PM speaker

The hardware employed must be safely and securely attached both to the loudspeaker and the structure

in question, using only the mounting holes. A general rule for soft surface installations (wood beams) is to

multiply the corresponding working load limit by 75%: the result will be approximate working load strength.

Use thread locking compound for all installations.

CAUTION: Mounting the PM loudspeaker may require two people.

When in doubt contact a qualiﬁed structural/mechanical engineer for approval of the mounting

materials and methods.

1. Remove the 3 top cover mounting screws, loosen the 2 side top cover screws rotate the top

cover counterclockwise, and pull up to remove the top cover. (Fig 1 and 2)

2. Locate suitable support structure in the area the speaker is to be installed.

3. Route the bare end of the main support cable though the included clamp, then around the

mounting structure, and back through the clamp. (Fig 3 and 4)

4. Adjust the cable length in the clamp so that the eyelet end of the cable is at the ﬁnal height

above the ﬂoor. (Fig 5)

5. (For PM8) Route the eyelet end of the main support cable through the top cover of the PM

speaker, attach the included carabiner clip to the eyelet and the large mounting hole on the

back of the PM speaker. (Fig 6a) (For PM4) Route the eyelet end of the main support cable

through the top cover of the PM speaker, attach the eyelet to the large mounting hole on the

back of the PM speaker using included mounting screw. (Fig 6b)

6. Repeat steps 1-4 for the safety cable and attach it the one of the smaller mounting holes on the

support plate of the PM speaker with the included mounting screw. (Fig 6)

7. Route the speaker cable through the top cover and connect to the appropriate terminals.

8. Position the top cover over the side cover screws and rotate the cover clockwise to align the

top cover mounting screw holes. Reinstall the 3 mounting screws, tighten and tighten the side

cover screws.

9. Slide the top hole plug over the main support cable, safety cable, and speaker cable using the

opening on the side of the plug. Then slide the plug down the cable and into the top cover hole.

(Fig 7 and 8)

Note: If the speaker is being installed outdoors, seal plug with RTV silicone to prevent moisture

from entering speaker.

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

TOP COVER

SIDE SCREW (2)

TOP COVER MOUNTING

SCREWS (3)

FIG.1

FIG.2

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

FIG.3

FIG.4 FIG.5

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

FIG.6a

FIG.8

FIG.7

FIG.6b

SUPPORT CABLE SUPPORT CABLE

SAFETY CABLE SAFETY CABLE

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

FIG.9

SUSPENDED INSTALLATION VIA DOWN PIPE (NOT- INCLUDED)

Using 3/4” Diameter Ceiling Fan Hardware

Atlas Sound’s PM series speaker may also be installed using industry standard ceiling fan hardware. This

hardware is available at most local hardware stores. Using this type of installation allows speaker cable

and safety cable to be concealed with the down pipe providing a very clean installation.

1. Remove the 3 top cover mounting screws, loosen the 2 side top cover screws rotate the top

cover counterclockwise, and pull up to remove the top cover. (Fig. 1 and 2)

2. Locate suitable support structure in the area the speaker is to be installed.

3. Mount the ceiling mount canopy and down pipe per manufacturer instructions.

4. Screw the PM speaker top cover onto the bottom of the down pipe, install the safety screw

though the side of the top cover and through the end of the down pipe. (Fig. 9)

5. Route the bare end of the safety cable though the included clamp, then around a suitable

support structure, and back through the clamp. (Fig. 3 and 4)

6. Route the eyelet end of the safety cable through down pipe and the cover of the PM speaker,

attach the eyelet to one of the smaller mounting holes on the support plate of the PM speaker

with the included mounting screw. (Fig. 9)

7. Route the speaker cable through the down pipe and connect to the appropriate terminals.

8. Position the speaker under the top cover, align the side cover screws and rotate the speaker

clockwise to align the top cover mounting screw holes. Reinstall the 3 mounting screws,

tighten and tighten the side cover screws. (Fig. 9)

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

SPECIFICATIONS

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE REMEDY

MODEL POWER

RATING 70.7V TAPS FREQUENCY

RESPONSE

SENSITIVITY

(1W/1M)

DISPERSION

ANGLE

WOOFER

MAG. WT. WOOFER HF DRIVER DIMENSIONS ENCLOSURE

VOLUME WEIGHT

PM4FA

25 Watts

(Transformer

Limited)

1, 2, 4, 8, 16 75Hz-20kHz

(±7dB) 88dB Average 130° 10oz (311g)

4" Ploy Cone

Butyl Rubber

Surround

Coaxially Mounted PEI

Dome Tweeter

9.25” (235mm) Dia.

13.87” (352mm)

Overall Height

478 Cubic

Inches

10 lbs.

(3.73kg)

PM8GD

15 Watts

(Transformer

Limited)

1, 2, 4 & 8 55Hz-15kHz

±5dB 96dB Average 120° 10oz. (311g) 8" Treated

Paper

Coaxially Mounted 3"

Treated Paper

12.25” (311mm) Dia.

16.62” (422mm)

Overall Height

1075 Cubic

Inches

14 lbs.

(5.23kg)

PM8FA

70 Watts

(Transformer

Limited)

1.9, 3.8, 7.5,

15, 30 &

60W

55Hz-20kHz

±5dB 90dB Average 100° 21oz. (653g)

8" W/ Poly-

propolene

Cone & SBR

Surround

Coaxially Mounted PEI

Dome Tweeter

12.25” (311mm) Dia.

16.62” (422mm)

Overall Height

1075 Cubic

Inches

16.5 lbs.

(6.16kg)

PM8CX

150 Watts

(Transformer

Limited)

7.5, 15, 30

& 60W

48Hz-18kHz

±10dB 92dB Average 90° 25oz. (800g)

8" W/ Poly-

propolene

Cone & TPE

Surround

Coaxially Mounted 1"

Titanium Compression

Driver

12.25” (311mm) Dia.

16.62” (422mm)

Overall Height

1075 Cubic

Inches

21 lbs.

(7.84kg)

There is no sound Power off. Equipment setting is wrong.

Volume set too low.

Assure that power is applied to all equipment in system. Check

that routing (input/output) controls are set correctly. Check that

volume level is above minimum.

There is no sound Loose connection. Check system from start to ﬁnish for crossed wires, loose

connection, etc. On the PM location check for correct connection.

Low sound level Setting/volume control is set too low.

Connection is shorted or bad.

Check volume levels or ampliﬁers and related equipment

(equalizer). Check that connections aren't partially shorted/

corroded.

Sound cuts in and out System overload/oscillation intermittent connection. Check for overload condition or bad connection.

Distortion at increased levels Ampliﬁer/speaker overdriven. Check that power to speaker isn't over limits. Check that ampliﬁer

isn't overdriven. Reduce power to ampliﬁer slightly.

Speaker makes "buzzing" noise Hardware loose or speaker damaged. Make sure speaker grille is tight. Check other hardware

connections. Check speakers for loose parts or speaker damage.

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

NOTES

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

INSTALLATION INSTRUCTIONS

PM SERIES LOUDSPEAKERS 4" AND 8"

Limited Five Year Warranty

All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial, or

commercial purchaser to be free from defects in material and workmanship and to be in compliance with

our published speciﬁcations, if any. "This warranty shall extend from the date of purchase for a period

of ﬁve years on all Atlas Sound products, including SOUNDOLIER brand, and ATLAS SOUND brand

products except as follows: one year on electronics and control systems; one year on replacement parts;

and one year on Musician Series stands and related accessories. Additionally, fuses and lamps carry no

warranty." Atlas Sound will solely at its discretion, replace at no charge or repair free of charge defective

parts or products when the product has been applied and used in accordance with our published

operation and installation instructions. We will not be responsible for defects caused by improper storage,

misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal

atmospheres, water immersion, lightning discharge, or malfunctions when products have been modiﬁed

or operated in excess of rated power, altered, serviced or installed in other than a workman like manner.

The original sales invoice should be retained as evidence of purchase under the terms of this warranty.

All warranty returns must comply with our return policy set forth below. When products returned to Atlas

Sound do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing

costs for material and labor unless there is included with the returned product(s) a written request for an

estimate of repair costs before any non-warranty work is performed. In the event of replacement or upon

completion of repairs, return shipment will be made with the transportation charges collect.

EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF

CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ATLAS SOUND SHALL NOT BE LIABLE IN

TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE

ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE

ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Atlas Sound does not assume, or does it authorize any other person to assume or extend on its behalf,

any other warranty, obligation or liability. This warranty gives you speciﬁc legal rights and you may have

other rights which vary from state to state.

Atlas Sound Pm Series Users Manual ATS002583 Speakers Install Sheet

PM Series to the manual d3ea1dc7-576c-4038-9ba4-fdedecff050c

Navigation menu

Versions of this User Manual:

Views

Navigation