Atom RF66 PLL Stereo RF Wireless Speakers - Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	168376
Application ID	Wi98EZsd9j/AHd0oIAQmTQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.89kB (198623 bits)
Date Submitted	2001-09-07 00:00:00
Date Available	2001-09-07 00:00:00
Creation Date	2001-07-05 11:43:44
Producing Software	Photoshop PDF Plug-in 1.0
Document Lastmod	2001-07-05 11:43:59
Document Title	User manual
Document Creator	Photoshop PDF Plug-in 1.0

ATOMIC
Quick
Sei-Up Guide
- -1
MM
PLL Wooden Speakers
Congratulations on the purchase of RF-9366-OIS (QOOMHZ) Stereo RF Wireless Wooden
Speakers to enjoy the revolutionary technology of Phase Look Loop (I‘LL)! Please check
the supplied component against the following list:
2 x Wooden Speakers
l x Transmitter
1 x Power Supply (ACI’DC 12V 200m adapter for transmitter)
2 x Power Supply (AC/DC 13V 1,5A adaptor for speakers)
1 x 3.5mm Stowe Audio Cord (15111)
i x 3.5mm Y—connoction Cord. (90mm)
' SPEAKERS
(1) Power ON/OFF Button
(2) Volume Control Button
(3) Boss Control Button
(4) Channel Button
(5) Recharging LED Indicator
(6) 3 Channel Color LED Indicator
(7) Textile Speaker Cover
(8) DC IN Socket
(9) R/R+LIL Mode Burton
(10) Battery Compartment
(1 l) Battery Cover
(12) AC/DC 13V 1.5A adaptor
(13) Rechargeable Sealed Lead-Acid Batteries (Optional)
' TRANSMITTER
Trwmiuer Upper Surfaw:
(14) Power LED Indicator
Transmitter Bottom:
(15) Channel CHI/CHZ/CHS Switch
Transmitter Rear Side:
(16) Audio IN Socket
(17) DC IN Socket
(18) Antenna
ACCESSORIES
(19) 3.5mm Stereo Audég Card (1:51:11)
(20) 3.5mm Y-connection 00rd (90mm)
(21) AC/DC 12V 200m adaptor
INSTALLATION
Please follow this quick set—up guide to ensure trouble free installation of your Speakers,
mu;
Fix the Antenna Cord into the Antenna Tube (18) at the top of the transmitter.
Swab.
Connect the 3.5mm Stereo Audio Cord (19) to the audio output socket (Le. Phone/
Headphone 3.5mm socket) of your audio source, e.g. TV, HiPi, CD, DVD player etc.
“'"“‘ If your audio source has 2 RCA output rockets (red and while in color), use the 90mm
Y-conneeriarl Card (20) for connection, ifnecmsary.
Stair.
Connect the other end of the 3.5mm Stereo Audio Cord (19) to the Audio IN Socket (16) at
the rear side of the transmitter.
ML
Connect one end of the AC/DC 12V 200m adapter (21) to the DC IN Socket (17) at the
rear side of the transmitter, and tlte other end to the main electn'c wall outlet.
Size-EL
The transmitter will be automatically ON when there is audio signal from the audio source
(please make sure that the transmitter is powered ON by (he ACfDC adaptor in Step 4).
Then the Power LED Indicator (14) Will glow RED to confirm that the transmitter is ready
for operation. Place the transmitter on a dry, cool place preferably above head level.
"“ The transmitter has auto-cur—oflfimeflon. When there is no audio signal for n
prolangedperiod, firepower of the transmitter will be automatically cut of}?
SIM
Connect the end ofAC/DC 13V 1.5A adaptors (12) to DC IN Socket (8) at the rent side of
each speaker, and the other end to the main electric wall outlet.
Or insert the Rechargeable Sealed Lead-Acid Battery(0ptional) (13) into the Battery
Compartment (10) of each speaker by removing the Battery Cover (11).
Stalin:
Switch on your music device (TV. HiFi, CD, DVD etc.) and start your media playing.
and;
Switch ON (1) the speakers, it will automatically match the channel selected in the
transmitter, and the 3 Channel Color LED Indicator (6) shows the pro-set color. Then you
can hear a good quality sound. Adjust the Volume Control Button (2), Bass Control Button
(3) and R/R-tlJL Mode Button (9) to a comfortable sound level.
CHANNEL SELECTION
There are 3 channels altogether for the PLL Wooden Speakers. At the bottom of the
transmitter, there is a Charmel CHI/CHZ/CH3 Switch (15). After you have selected a
channel, me frequency will be memorized if the Speakers are continuously connected with
electricity. The last memory will be retained when you power on the speaker again. If you
change a channel. you just need to press the Channel Button (4) in the from of Speakers.
The 3 colors of 3 Channel Color LED Indicator (6) represent 3 different channels
respectively.
911.650MH1
912.925MHZ
913.900MH2
CHl
The 3 different channels are auto-locked by the latest PLL technology, enable you to enjoy
the great sound quality in high stability.
RECHARGIN G THE SPEAKERS
*** Recharging is only available for the Speakers System with the Rechargeable Sealed
Lead-acid Batteries.
Sim-11.
Insert the Rechargeable Sealed Lead-Acid Batteries (13) into the Battery Compartment (10)
of each speaker,
"“I'he batteries should be fully charged at least 24 hours.
SEMI.
SWitCh OFF (1) the Speakers.
Step};
Connect the end ofAC/DC 13V 1.5A adaptors (12) into DC IN Socket (8) at the rear side
of ml: speaker, and the other end to the main clean-i: wall outlet. The Recharging LED
Indicator (5) will glow RED to show that the speaker is being charged.
When the batteries are full, recharging will stop automatically, and the Recharging LED
Indicator (5) will tum off.
*** Recharging procedure should never exceed 48 hours.
TROUBLE SHOOTING GUIDE
If you encounter any trouble in setting up the Speakers, please check the following points:
(ll Disrupted m at author er “mm m“.
~ Check if the sound of your audio source is distorted and whether the volume control is
tuned to the suitable level.
~ Make sure that your audio sources, the transmitter and speakers are properly connected,
powered and switched ON.
- Check if you have selected the best channel, press the Channel Button (4) to check,
WWW
~ Check if the AC/DC 13V LSA adaptors are connected properly and the speakers are
switched ON.
~ If choose to use the Rechargeable Sealed Lead-Acid batteries, chock whether batteries
have sufficient power.
— Check it." the transmitter is properly connectod and powered ON with the AC/DC 12V
ZOOmA adaptor (the Power LED Indicator (14) should glow RED).
— Check if all connection cords are properly connected.
~ Check if the distance between the speakers and transmitter are within the effective
range. (The effective range of the device is approx. BOM in ope-n area.) Place the
speakers closer to the transmitter.
Mam
~ Check if the audio source is mono only, use stereo audio source.
Stall;
Connect the end of AC/DC 13V LSA adaptors (12) into DC IN Socket (8) at the rear side
of each speaker, and the other end to the main electric wall outlet. The Recharging LED
Indicator (5) will glow RED to show that the speaker is being charged.
When the batteries are full, recharging will stop automatically, and the Recharging LED
Indicator (5) will turn off.
“* Recharging procedure should never exceed 48 Iran".
TROUBLE SHOOTING GUIDE
If you encounter any trouble in setting up the Speakers, please check the following points:
Ell Dr'stmrd mind finality at l atlas: Eztlui‘
~ Check if the sound of your audio source is distorted and whether the volume control is
timed to the suitable level,
~ Make sure that your audio sources, the transmitter and speakers are properly connected,
powered and switched ON.
- Check if you have selected the best channel, press the Channel Button (4) to check.
WWW
— Check if the AC/DC 13V LSA adaptors are connected properly and the speakers are
switched ON.
~ If choose to use the Rechargeable Sealed Lead-Acid batteries, check whether batteries
have sufficient power.
~ Check if the transmitter is properly connected and powered ON with the ACf/DC 12V
200mA adaptor (the Power LED Indicator (14) should glow RED).
~ Check if all connection cards are properly connected.
~ Check if the dismce between the speakers and transmitter are within the effective
range. (The effective range of the device is approx. ROM in open arca.) Place the
speakers closer to the transmitter.
alerLSeuud.‘
- Check if the audio source is mono only, use stereo audio source.
Mendez
~ At the bottom or the transmitter, there is Chmmel CHI/CHZ/Cl-D Switch (15), select a
difl'erent channel and press the Channel Burton (4) once. The 3 Channel Color LED
Indicator (6) will show the pre-sct color, and channel is properly swimhed.
-IlJN-?2fll ‘lfi: SF- Hq7+979H7974 ‘ZIEI'A p . flfl I
[51W
~ Ifyour speakers syswm is continuously connected with electricity, the last momory on
the channel will be retained afler you have switched off the speakers, if you have cut
and reconnected the electricity, thc speakers will automatically search the charmel
when you power on again. The 3 Channel Color LED Indicator (6) will show the pre-
set color.
“mum
~ The transmitter has auto—cur-off function. When that: is no audio signal for a
prolonged period. the power of the transmitter will be automatically cut off. You j ust
need to switch on the audio sources again and press the Channel Button (4), if
necessary, until The 3 Channel Color LED Indicator (6) show the pro-set color. Then
you can listen the good quality sound again.
Warning: Changcs or modifications to this unit not uprcssly approved by the party
responsible/hr compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with tho limits jbr a CIoss
B digital device, pursuant to Part 15 of the F CC Rules. Those limits are designed to
provide reasonable protection against harmful interference in u rcshlemial installation.
This equl'pmznt generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment docs cause harmful Interfararu'e to radio or television
reception which can be determined by turning the equipment of and on, the user in
encouraged to try to correct the interfcrcncc by one or more of the following measures.
- Rcorirnt or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment in to an outlet on a circuit dy’fercntform that to which the
receiver is needed.
- Consult the dealer or an moribund radio/T V technician for help.
If you still have problem after checking the abov‘e points, please contact your
customer service. Do not try to loosen the screw: of the products to fix the problem.
All the above are mbject to our final change wirhautfim‘hcr nulint.
Copyright by A tom Industrial Ltd. 2001
-T||M-Dnn1 1a : <7 nianflvnnvfl'm may
no
SPECIFXCATIDNS
Model
Description
hummer
No. of Oh: nnel
Carrier Frequency
Effective Range
Power Supply
Speakers
Frequency Response
Amplifier Power Rating
Signal to Noise Ratio
Distortion
Auto Noise Mum: Fhmction
Power Supply
System Included
11-11 w_—mm< 4 n- tn
Ill-793667015 (900MH2)
Radio Frequency (UHF) Transmission
PLL Stereo RF Wireless Wooden Speakers System
(Phase Lock Loop (PLL)! Power Auto Cul-Ol‘f/ Auto Level
Control (ALC)/ Muting Functinn! Bass Control/
Rechargeable fimction/ 3 Channel Color LED Indicator)
Channel 1: 9114650MHZ
Channel 2: 912.925MHZ
Channel 3: 913.900MHZ
80 meters
AC/DC 12V ZOOmA adaptor ‘
20 — 20,000Hz
3 Watts RMS x 2
SOdB
<1 %
Standard
AC/DC 13V 1.5A adaptors OR
Rechargwhle Sealed Leadecid Batteries (Optional)
1 x Tmsmilter
2 in Speakers
1 x ACIDC 12Vr 200mA adaptor for transmitter
2 x AC/DC 13V 1.5A adzplor for speakers
1 x 3.5mm Stereo Audio Cord (1.5m)
1 x 3.5mm chonneeticm Curd (90mm)
ncfi . fiw‘inw'flvA rm“

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2001:07:05 11:43:59
Creator                         : Photoshop PDF Plug-in 1.0
Producer                        : Photoshop PDF Plug-in 1.0
Create Date                     : 2001:07:05 11:43:44
Page Count                      : 9

EXIF Metadata provided by EXIF.tools