Atom RF93 PLL Stereo RF Wireless Speakers - Transmitter User Manual
Atom Industrial Limited PLL Stereo RF Wireless Speakers - Transmitter
Atom >
User manual
ATOMIC Quick Sei-Up Guide - -1 MM PLL Wooden Speakers Congratulations on the purchase of RF-9366-OIS (QOOMHZ) Stereo RF Wireless Wooden Speakers to enjoy the revolutionary technology of Phase Look Loop (I‘LL)! Please check the supplied component against the following list: 2 x Wooden Speakers l x Transmitter 1 x Power Supply (ACI’DC 12V 200m adapter for transmitter) 2 x Power Supply (AC/DC 13V 1,5A adaptor for speakers) 1 x 3.5mm Stowe Audio Cord (15111) i x 3.5mm Y—connoction Cord. (90mm) ' SPEAKERS (1) Power ON/OFF Button (2) Volume Control Button (3) Boss Control Button (4) Channel Button (5) Recharging LED Indicator (6) 3 Channel Color LED Indicator (7) Textile Speaker Cover (8) DC IN Socket (9) R/R+LIL Mode Burton (10) Battery Compartment (1 l) Battery Cover (12) AC/DC 13V 1.5A adaptor (13) Rechargeable Sealed Lead-Acid Batteries (Optional) ' TRANSMITTER Trwmiuer Upper Surfaw: (14) Power LED Indicator Transmitter Bottom: (15) Channel CHI/CHZ/CHS Switch Transmitter Rear Side: (16) Audio IN Socket (17) DC IN Socket (18) Antenna ACCESSORIES (19) 3.5mm Stereo Audég Card (1:51:11) (20) 3.5mm Y-connection 00rd (90mm) (21) AC/DC 12V 200m adaptor INSTALLATION Please follow this quick set—up guide to ensure trouble free installation of your Speakers, mu; Fix the Antenna Cord into the Antenna Tube (18) at the top of the transmitter. Swab. Connect the 3.5mm Stereo Audio Cord (19) to the audio output socket (Le. Phone/ Headphone 3.5mm socket) of your audio source, e.g. TV, HiPi, CD, DVD player etc. “'"“‘ If your audio source has 2 RCA output rockets (red and while in color), use the 90mm Y-conneeriarl Card (20) for connection, ifnecmsary. Stair. Connect the other end of the 3.5mm Stereo Audio Cord (19) to the Audio IN Socket (16) at the rear side of the transmitter. ML Connect one end of the AC/DC 12V 200m adapter (21) to the DC IN Socket (17) at the rear side of the transmitter, and tlte other end to the main electn'c wall outlet. Size-EL The transmitter will be automatically ON when there is audio signal from the audio source (please make sure that the transmitter is powered ON by (he ACfDC adaptor in Step 4). Then the Power LED Indicator (14) Will glow RED to confirm that the transmitter is ready for operation. Place the transmitter on a dry, cool place preferably above head level. "“ The transmitter has auto-cur—oflfimeflon. When there is no audio signal for n prolangedperiod, firepower of the transmitter will be automatically cut of}? SIM Connect the end ofAC/DC 13V 1.5A adaptors (12) to DC IN Socket (8) at the rent side of each speaker, and the other end to the main electric wall outlet. Or insert the Rechargeable Sealed Lead-Acid Battery(0ptional) (13) into the Battery Compartment (10) of each speaker by removing the Battery Cover (11). Stalin: Switch on your music device (TV. HiFi, CD, DVD etc.) and start your media playing. and; Switch ON (1) the speakers, it will automatically match the channel selected in the transmitter, and the 3 Channel Color LED Indicator (6) shows the pro-set color. Then you can hear a good quality sound. Adjust the Volume Control Button (2), Bass Control Button (3) and R/R-tlJL Mode Button (9) to a comfortable sound level. CHANNEL SELECTION There are 3 channels altogether for the PLL Wooden Speakers. At the bottom of the transmitter, there is a Charmel CHI/CHZ/CH3 Switch (15). After you have selected a channel, me frequency will be memorized if the Speakers are continuously connected with electricity. The last memory will be retained when you power on the speaker again. If you change a channel. you just need to press the Channel Button (4) in the from of Speakers. The 3 colors of 3 Channel Color LED Indicator (6) represent 3 different channels respectively. 911.650MH1 912.925MHZ 913.900MH2 CHl The 3 different channels are auto-locked by the latest PLL technology, enable you to enjoy the great sound quality in high stability. RECHARGIN G THE SPEAKERS *** Recharging is only available for the Speakers System with the Rechargeable Sealed Lead-acid Batteries. Sim-11. Insert the Rechargeable Sealed Lead-Acid Batteries (13) into the Battery Compartment (10) of each speaker, "“I'he batteries should be fully charged at least 24 hours. SEMI. SWitCh OFF (1) the Speakers. Step}; Connect the end ofAC/DC 13V 1.5A adaptors (12) into DC IN Socket (8) at the rear side of ml: speaker, and the other end to the main clean-i: wall outlet. The Recharging LED Indicator (5) will glow RED to show that the speaker is being charged. When the batteries are full, recharging will stop automatically, and the Recharging LED Indicator (5) will tum off. *** Recharging procedure should never exceed 48 hours. TROUBLE SHOOTING GUIDE If you encounter any trouble in setting up the Speakers, please check the following points: (ll Disrupted m at author er “mm m“. ~ Check if the sound of your audio source is distorted and whether the volume control is tuned to the suitable level. ~ Make sure that your audio sources, the transmitter and speakers are properly connected, powered and switched ON. - Check if you have selected the best channel, press the Channel Button (4) to check, WWW ~ Check if the AC/DC 13V LSA adaptors are connected properly and the speakers are switched ON. ~ If choose to use the Rechargeable Sealed Lead-Acid batteries, chock whether batteries have sufficient power. — Check it." the transmitter is properly connectod and powered ON with the AC/DC 12V ZOOmA adaptor (the Power LED Indicator (14) should glow RED). — Check if all connection cords are properly connected. ~ Check if the distance between the speakers and transmitter are within the effective range. (The effective range of the device is approx. BOM in ope-n area.) Place the speakers closer to the transmitter. Mam ~ Check if the audio source is mono only, use stereo audio source. Stall; Connect the end of AC/DC 13V LSA adaptors (12) into DC IN Socket (8) at the rear side of each speaker, and the other end to the main electric wall outlet. The Recharging LED Indicator (5) will glow RED to show that the speaker is being charged. When the batteries are full, recharging will stop automatically, and the Recharging LED Indicator (5) will turn off. “* Recharging procedure should never exceed 48 Iran". TROUBLE SHOOTING GUIDE If you encounter any trouble in setting up the Speakers, please check the following points: Ell Dr'stmrd mind finality at l atlas: Eztlui‘ ~ Check if the sound of your audio source is distorted and whether the volume control is timed to the suitable level, ~ Make sure that your audio sources, the transmitter and speakers are properly connected, powered and switched ON. - Check if you have selected the best channel, press the Channel Button (4) to check. WWW — Check if the AC/DC 13V LSA adaptors are connected properly and the speakers are switched ON. ~ If choose to use the Rechargeable Sealed Lead-Acid batteries, check whether batteries have sufficient power. ~ Check if the transmitter is properly connected and powered ON with the ACf/DC 12V 200mA adaptor (the Power LED Indicator (14) should glow RED). ~ Check if all connection cards are properly connected. ~ Check if the dismce between the speakers and transmitter are within the effective range. (The effective range of the device is approx. ROM in open arca.) Place the speakers closer to the transmitter. alerLSeuud.‘ - Check if the audio source is mono only, use stereo audio source. Mendez ~ At the bottom or the transmitter, there is Chmmel CHI/CHZ/Cl-D Switch (15), select a difl'erent channel and press the Channel Burton (4) once. The 3 Channel Color LED Indicator (6) will show the pre-sct color, and channel is properly swimhed. -IlJN-?2fll ‘lfi: SF- Hq7+979H7974 ‘ZIEI'A p . flfl I [51W ~ Ifyour speakers syswm is continuously connected with electricity, the last momory on the channel will be retained afler you have switched off the speakers, if you have cut and reconnected the electricity, thc speakers will automatically search the charmel when you power on again. The 3 Channel Color LED Indicator (6) will show the pre- set color. “mum ~ The transmitter has auto—cur-off function. When that: is no audio signal for a prolonged period. the power of the transmitter will be automatically cut off. You j ust need to switch on the audio sources again and press the Channel Button (4), if necessary, until The 3 Channel Color LED Indicator (6) show the pro-set color. Then you can listen the good quality sound again. Warning: Changcs or modifications to this unit not uprcssly approved by the party responsible/hr compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with tho limits jbr a CIoss B digital device, pursuant to Part 15 of the F CC Rules. Those limits are designed to provide reasonable protection against harmful interference in u rcshlemial installation. This equl'pmznt generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment docs cause harmful Interfararu'e to radio or television reception which can be determined by turning the equipment of and on, the user in encouraged to try to correct the interfcrcncc by one or more of the following measures. - Rcorirnt or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment in to an outlet on a circuit dy’fercntform that to which the receiver is needed. - Consult the dealer or an moribund radio/T V technician for help. If you still have problem after checking the abov‘e points, please contact your customer service. Do not try to loosen the screw: of the products to fix the problem. All the above are mbject to our final change wirhautfim‘hcr nulint. Copyright by A tom Industrial Ltd. 2001 -T||M-Dnn1 1a : <7 nianflvnnvfl'm may no SPECIFXCATIDNS Model Description hummer No. of Oh: nnel Carrier Frequency Effective Range Power Supply Speakers Frequency Response Amplifier Power Rating Signal to Noise Ratio Distortion Auto Noise Mum: Fhmction Power Supply System Included 11-11 w_—mm< 4 n- tn Ill-793667015 (900MH2) Radio Frequency (UHF) Transmission PLL Stereo RF Wireless Wooden Speakers System (Phase Lock Loop (PLL)! Power Auto Cul-Ol‘f/ Auto Level Control (ALC)/ Muting Functinn! Bass Control/ Rechargeable fimction/ 3 Channel Color LED Indicator) Channel 1: 9114650MHZ Channel 2: 912.925MHZ Channel 3: 913.900MHZ 80 meters AC/DC 12V ZOOmA adaptor ‘ 20 — 20,000Hz 3 Watts RMS x 2 SOdB <1 % Standard AC/DC 13V 1.5A adaptors OR Rechargwhle Sealed Leadecid Batteries (Optional) 1 x Tmsmilter 2 in Speakers 1 x ACIDC 12Vr 200mA adaptor for transmitter 2 x AC/DC 13V 1.5A adzplor for speakers 1 x 3.5mm Stereo Audio Cord (1.5m) 1 x 3.5mm chonneeticm Curd (90mm) ncfi . fiw‘inw'flvA rm“
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Modify Date : 2001:07:05 11:43:59 Creator : Photoshop PDF Plug-in 1.0 Producer : Photoshop PDF Plug-in 1.0 Create Date : 2001:07:05 11:43:44 Page Count : 9EXIF Metadata provided by EXIF.tools