Attenti US XT06418 Criminal Offenders GPS Tracker User Manual User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	1424385
Application ID	wV+Cu8cel7SzNR7VESd2eg==
Document Description	User Manual Part 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	128.57kB (1607164 bits)
Date Submitted	2011-03-02 00:00:00
Date Available	2011-03-03 00:00:00
Creation Date	2011-03-01 10:10:36
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2011-03-01 10:10:36
Document Title	Microsoft Word - User's Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	jdefant

Activating the SMART® XT without SMART® Base cont.
Activating the SMART® XT cont.
Step 7:
Click on the Activation button
to acknowledge.
After the Activation button has
been clicked, the XT will display
the offender’s name, date and
time.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
31
Deactivating Hardware
1. Move your mouse cursor over the Hardware Functions dropdown menu and left click
Deactivate.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
32
Deactivating Hardware, Cont.
2. Click the checkbox next to the XT, Bracelet, and SMART Base. (see below).
3. Click on the drop-down menu and select a reason for deactivation. This is required.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
33
Deactivating Hardware, Cont.
4. Click the Save button. A popup will generate with a warning that the deactivation is
immediate.
5. Click OK.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
34
Deactivating Hardware, Cont.
6. You will be returned to the Offender Information page, where the hardware will be
pending deactivation. The device is now required to call Pro Tech and transmit its final
data. The hardware will only be unassigned once this final call has occurred.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
35
Removing the Bracelet
Removing the Bracelet
Step 1:
Cut the strap by using the strap
cutters and remove the Bracelet
from the offender’s leg.
Step 2:
Using a Pro Tech flathead
screwdriver, push on the tamper
plugs to break them.
Step 3:
Use the screwdriver to
remove the tamper plugs
from the brackets.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
36
Removing the Bracelet cont.
Removing the Bracelet Cont.
Step 4:
While keeping the latch depressed, pull the strap with the
attached pin trays out of each bracket.
Discard the tamper plugs and straps.
Note: Do NOT reuse the tamper plugs.
Note: Do NOT remove tamper plugs from the brackets of
the Bracelet unless there is a strap with an attached pin
tray inside
the bracket.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
37
Appendix
Rule Definitions
Bracelet Battery:
• The Bracelet battery is getting low; the bracelet must be replaced within seven days.
Bracelet Gone:
• Occurs when the offender is out of range of the tracking device. Therefore the
location of the offender is unknown.
• If the “Notify Offender” box is checked in PCE, the offender will receive the automatic
message “Bracelet Gone- Please move closer.”
• The range of the bracelet to the XT.
o 75 to 100 ft (clear line of site) away from XT while out of Base Unit; OR
o 125 to 150 ft (clear line of site) away from XT while in the Base Unit
• Pro Tech adds a 5 minute buffer period to all Bracelet Gone violations.
This is not a Grace Period. During this time, the offender is not notified of
the Bracelet Gone. Only after five minutes have passed will the Bracelet
Gone Rule go into violation. If you add a Grace, it will apply after five
minute buffer has passed. For example, if a one minute grace is set, the
bracelet will have to be out of range for 6 minutes before notifications are
sent out.
Bracelet Strap:
• The bracelet strap has been compromised or removed from the bracelet.
Base Unit A/C Power:
• The SMART® Base has lost A/C power and is running on the battery back-up.
Base Unit Battery:
• The SMART® Base has been running on the back-up battery and is about to lose
power. With a full charge (24 hours) the back-up battery will last 24 hours. While
running on the back-up battery, the SMART® Base will not charge the XT. If the XT is
in the SMART® Base, and the SMART® Base can call in, the XT will still be able to
successfully download its information.
Base Unit Phone Line Disconnect:
• The phone line has been removed from the SMART® Base. You will not get this alert
until the phone line has been re-connected, because the SMART® Base requires a
phone line to report violations.
Base Unit Tamper:
• The SMART® Base has been compromised in some form.
Base Unit Unable to Connect:
• The SMART® Base has not called Pro Tech in 6.5 hours.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
38
Phone Number Caller ID:
• Signals the offender may have moved the SMART® Base to a new phone line or
home.
• The number cannot be “private” or “unlisted.”
Home Curfew/In Charger:
• The XT is NOT in the assigned SMART Base when the In Charger schedule is in effect.
Motion No GPS:
• Occurs when the XT has accumulated 10 minutes of motion in a 60-minute period
without receiving a signal from the GPS satellites.
• If the “Notify Offender” box is checked in PCE/SMART® View the offender is sent the
automatic message “GPS Warning-Go Outside”. The offender has 10 minutes (grace
period) from this point to clear the Motion No GPS warning message before it
becomes a violation and notifications are sent out.
• When GPS is reacquired, the offender is notified with the automatic message “GPS
Warning Cleared”.
• If the offender does NOT regain GPS at the end of the 10 minute grace period, a
Motion No GPS violation is created.
Zone:
•
The offender has violated a Zone set up by the supervising officer or agency. This
could be an Exclusion (out-of-bound) Zone or an Inclusion (in-bound) Zone.
XT Battery:
• The XT battery is low and needs to be placed in the SMART® Base. The offender
receives the automatic message “Battery Low-Place in Base Unit”.
XT Tamper:
• The XT has been compromised and/or tampered with.
Active XT Unable to Connect:
• It has been over 2.5 hours since the XT has called in. The offender is not notified of
the Unable to Connect and a message cannot be sent to the device.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
39
Accessing the Officer Menu
To access the Officer’s Menu from an Assigned XT, follow the button sequence below:
BUTTON SEQUENCE: 1,1 / 2 / 1/ 2,2 / 3
Vibrate Beep: Changes MTD alert mode.
Id Numbers: Displays ID numbers of assigned hardware.
Alarm Set: Accesses alarm clock function.
Call List: Displays the phone numbers that the XT can dial.
Icon Glossary: Displays the icons that appear when the XT is in violation.
Phone # Prefix: Changes dialing prefix for Base Unit calls.
Beep Volume: Changes volume of alert tone.
Time Format: Changes the way the time is displayed.
Firmware Ver.: Displays current version of software in XT.
Bracelet Test: Displays the receipt of the signal from the bracelet.
Set Brac S/N: Allows you to temporarily assign a bracelet to an unassigned XT.
De-Activate: Allows you to power down the XT.
Modem Info: Allows you to force the device to call Pro Tech immediately.
Assigned SBS: Shows you the SMART Base that is assigned to the offender.
Satellite Bar: Displays the receipt of GPS signals from the GPS satellites.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
40
Accessing the Offender Menu
The offender will be allowed to access a menu within the XT that will allow them to view
and/or edit options. To access the offender menu, press button 3.
Vibrate Beep: Changes XT alert mode.
Id Numbers: Displays ID numbers of assigned hardware.
Alarm Set: Accesses alarm clock function.
Call List: Displays the phone numbers that the XT can dial.
Icon Glossary: Displays the icons that will appear with each violation.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
41
Certifications
The XT complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.) This device may not cause harmful interference and
2.) This device must accept any interference received, including interference that may cause
undesired operation.
FCC ID: NC3XT06418
PRO TECH MONITORING IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC Radio Frequency Exposure
The XT radio device has been evaluated under FCC Bulletin OET 65C and found to be
compliant with the requirements as set forth in evaluating compliance with FCC Guidelines for
Human Exposure to Radio frequency Electromagnetic Fields. This device is to be used solely by
law enforcement agencies for tracking purposes.
In order to maintain compliance to RF exposure requirements for body worn use this device must
be carried in a suitable belt clip pouch to provide a minimum 1.5cm separation from the body.
This device emits RF Energy and has been SAR tested in a head and body worn configuration
and the maximum values measured were found to be 0.133W/Kg (GSM850 head), 0.299W/Kg
(GSM850 Body) and 0.032W/Kg (PCS1900 head), 0.028W/Kg (PCS Body).
The antenna(s) used for this transmitter must not be co- located or operating in conjunction with
any other antenna or transmitter except in accordance with FCC multi-transmitter product
procedures.
Bracelet Transmitter
The radiation output power of the bracelet transmitter falls below the FCC radio frequency
exposure limits.
Pro Tech Monitoring Inc. Issue Date: 2/14/2011 Please check online for the most up to date version.
42

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Creator                         : jdefant
Title                           : Microsoft Word - User's Manual.doc
Create Date                     : 2011:03:01 10:10:36-05:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:03:01 10:10:36-05:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:c66eadcd-7137-4271-8407-21e5cfba73d0
Instance ID                     : uuid:42466630-d5a6-40b4-b6f8-0837b442e9a5
Page Count                      : 12
Author                          : jdefant

EXIF Metadata provided by EXIF.tools