Attenti NTT-830-2 Nurse Tracking Tag User Manual Staff Card V00
3M Residential Monitoring, Inc. Nurse Tracking Tag Staff Card V00
Attenti >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1755179 |
| Application ID | yjKj9RJPoCTS4Jn9pqWUYw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 18.16kB (226964 bits) |
| Date Submitted | 2012-07-30 00:00:00 |
| Date Available | 2013-01-26 00:00:00 |
| Creation Date | 2012-07-29 06:17:53 |
| Producing Software | Nitro PDF PrimoPDF |
| Document Lastmod | 2012-07-29 06:17:53 |
| Document Title | Microsoft Word - Staff Card User Manual-V00 |
| Document Creator | PrimoPDF http://www.primopdf.com |
| Document Author: | A2QRRZZ |
3M Resident Monitoring 7170 W. Donges Bay Road Toll Free: 800-606-0661 Mequon, WI 35092 Office: 414-358-8200 Fax: 414-358-8100 www.3m.com/residentmonitoring Staff Card USER MANUAL NTT-830 Nurse Tracking Tag Copyright 2012 all rights reserved This document contains information that is proprietary to Attenti Ltd. No part of this publication may be reproduced in any form whatsoever without prior written approval by Attenti. 3M Resident Monitoring Staff Card User Manual TABLE OF CONTENTS Foreword............................................................................................................................................................ 3 Product manual ................................................................................................................................................. 3 2.1 Tracking Tag ........................................................................................................................................... 3 2.1.1 Deactivated mode....................................................................................................................... 3 2.1.2 Reset (Standby) Mode ............................................................................................................... 3 2.1.3 Active Mode ................................................................................................................................ 3 2.2 Summary of SC Tracking Modes ............................................................................................................ 4 2.3 Low Battery ............................................................................................................................................. 4 FCC Notices ...................................................................................................................................................... 5 Page: 2 of 5 3M Resident Monitoring Staff Card User Manual FOREWORD The RFID Staff Card is a device designed to be allocated to nurses in the area monitored by the AMS system. The tag contains both a passive RFID circuit as well as an active transmission circuit, allowing the system to capture when and which staff responded to a nurse call event. PRODUCT MANUAL 2.1 Tracking Tag The SC will have 3 main stages: • Deactivated mode • Reset (Standby) Mode • Active Mode 2.1.1 Deactivated mode When deactivated, the SC shall not send any sanity transmissions nor shall it monitor motion. The SC shall leave the factory in this mode. Active/Rest Deactivated • Press and hold down the SC's button for 5 seconds; at the end of the 5 seconds, the LED shall be lit (steady LED) for 5 seconds. • While the LED is lit, press the button three times; the LED flashes for 3 seconds to indicate that the SC is about to shut down. OR • After 12 hours without motion, the SC shall automatically deactivate. Note: Before the SC is deactivated, it shall send a transmission to the AMS to indicate that it has been manually deactivated (as opposed to destroyed or lost). 2.1.2 Reset (Standby) Mode In Rest mode, the SC shall transmit once every 15 minutes for a period of 1 hour. After 1 hour, the SC shall transmit once every hour. Deactivated Rest Mode: • Press and hold down the button for 5 seconds Active Rest Mode • No motion detected by the SC for 2 minutes. 2.1.3 Active Mode During Active mode, the device shall transmit a signal once every 18 – 22 seconds. Rest Active Mode • Motion is detected by the SC. Page: 3 of 5 3M Resident Monitoring 2.2 Staff Card User Manual Summary of SC Tracking Modes Figure 1: Transition between Modes SC Status LED Indication Low battery Flashes once every 10 seconds Deactivated → Rest Mode On while button is pressed, flashing for 3 seconds to indicate that activation is successful. Rest/Active Mode → Deactivated On while the button is pressed, flashing for 3 seconds to indicate indic that deactivation is successful. 2.3 Low Battery The SC shall send a "Low Battery" signal with every transmission when the battery has approximately (but no less than) 2 weeks until the transmitter is rendered non non-functional. When a "Low Battery" condition on is present, the Low Battery LED indicator shall flash once every 10 seconds. Page: 4 of 5 3M Resident Monitoring Staff Card User Manual FCC NOTICES This note is applicable to the American Staff Card NOTE The Staff Card complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures • • • Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver. Consult the dealer or an experienced radio/TV technician for help. CAUTION Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. For Customer Support contact: 3M Resident Monitoring. Toll Free 1-800-606-0661 Fax +1-414-358-8100 Web: www.3M.com/residentmonitoring Page: 5 of 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 5 Producer : Nitro PDF PrimoPDF Create Date : 2012:07:29 06:17:53-03:00 Modify Date : 2012:07:29 06:17:53-03:00 Title : Microsoft Word - Staff Card User Manual-V00 Creator : PrimoPDF http://www.primopdf.com Author : A2QRRZZEXIF Metadata provided by EXIF.tools