Attenti PB-830-2 Call Button and Pull Tag User Manual

3M Residential Monitoring, Inc. Call Button and Pull Tag Users Manual

Users Manual

Part Number - 350109601  Revision – A00-000   Wireless Resident Monitoring Solutions Emergency Call Button Operational Instructions The HomeFree system was designed to monitor special needs and Dementia individuals in the care center environment. The Emergency Call Button is one of the many unique elements of this system.   The Emergency Call Button is a small, lightweight push button unit worn by the resident / nurse that alerts care center staff members whenever the resident / nurse activates an emergency call alert. The Emergency Call Button can be worn as a pendent, watch style or clip-on. The Emergency Call Button is not for use outside the monitored area.              Activating the Emergency Call Button: The Emergency Call Button is turned off by the manufacturer before shipment and must be activated before use. To activate, hold the Emergency Call Button firmly in your hand and press the panic button continuously for 2 seconds. The LED indicator flashes indicating that the Emergency Call Button is in active mode. Panic Button LED Indicator
Part Number - 350109601  Revision – A00-000  Once in active mode, the Emergency Call Button sends a status message to the  monitoring  station  (every  60  minutes)  indicating  the  current  battery status  as  well  as  the  location  of  the  Emergency  Call  Button.  This  status message is sent until the Emergency Call Button is deactivated.    Activating a Panic Alert Press the panic button. The LED indicator flashes indicating that the Emergency Call Button is in panic alert mode.  Once in  panic  alert  mode,  the  Emergency  Call  Button  sends  a panic  alert message (every 20 seconds) to the monitoring station. This message is sent until the panic alert is deactivated. Deactivating a Panic Alert Press the panic button 6 times in quick succession (within 5 seconds). The LED indicator lights up for 3 seconds indicating that the panic alert has been deactivated.  Even  though  the  panic  alert  has  been  deactivated,  the  Emergency  Call Button  is  still  in  active  mode.  Therefore,  the  Emergency  Call  Button  still sends a status message to the monitoring station. This status message is sent until the Emergency Call Button is deactivated.    Deactivating the Emergency Call Button Holding the Emergency Call Button firmly in your hand, press the panic button continuously for 10 seconds. The LED indicator lights up for 3 seconds. During this 3-second period, press the panic button 2 times in succession. The Emergency Call Button is now in deactivated mode (turned off).
Part Number - 350109601  Revision – A00-000  FCC Notices Note: The following is applicable only to the 433MHz version of this product. FCC ID: QUX-PB-830-2 FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT The equipment complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions: (1)  This  device  may not  cause  harmful  interference, and  (2)  This device  must  accept  any interference received, including interference that may cause undesired operation. This equipment has been tested  and found to comply  with  the limits  for  a  Class B digital device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide reasonable  protection  against  harmful  interference  in  a  residential  installation.  This equipment generates, uses and  can radiate radio frequency energy and,  if not installed and used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio communications.  However,  there  is  no  guarantee  that  interference  will  not  occur  in  a particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna, 2. Increase the separation between the equipment and the receiver, 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, 4. Consult the dealer or an experienced radio/TV technician for help. Caution Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.  In case of any problems please contact your local service provider:  HomeFree Systems Inc. Phone: 1-800-606-0661 Outside US call: +927-3-7671900  E-mail:contactusa@homefreesys.com Web Site: www.homfreesys.com

Navigation menu